Export Catalogue fails to function - LR3
The command File > "Export as Catalogue" fails to function. No dialogue panel pops up. No error message. Nothing - whether one or more images are selected.
LR3.6 on PC platform XP Pro SP3
This only happens in a limited number of folders. Generally the command works in all other folders.
I have tried optimising catalogue, forcing a catalogue backup, re-synchronising folder, moving the images into a new different folder, moving back into original folder.
If I create a new folder and move the files (dragging) into the new folder, still no difference.
If I move files back again, still no difference.
If I move files into a folder that does not suffer this problem, then Export as catalog works normally,
If I then move back to original folder command fails again.
Up to this point I figure the catalogue is corrupted.in regards "folder" as opposed to file data. Some folders have disabling "Export to Catalogue".
If I rename faulty folder, still no change of problem.
However,
If Library > "Show fotos in sub folders" is toggled ON, then the command works as normal, This is not my usual mode, and when I toggle this option OFF, Export to Catalogue fails as before
This problem goes un-noticed so catalogue backup recovery is not viable.
What is the solution for repairing the catalogue or eliminating the bug?
The command File > "Export as Catalogue" fails to function. No dialogue panel pops up. No error message. Nothing - whether one or more images are selected.
LR3.6 on PC platform XP Pro SP3
This only happens in a limited number of folders. Generally the command works in all other folders.
I have tried optimising catalogue, forcing a catalogue backup, re-synchronising folder, moving the images into a new different folder, moving back into original folder.
If I create a new folder and move the files (dragging) into the new folder, still no difference.
If I move files back again, still no difference.
If I move files into a folder that does not suffer this problem, then Export as catalog works normally,
If I then move back to original folder command fails again.
Up to this point I figure the catalogue is corrupted.in regards "folder" as opposed to file data. Some folders have disabling "Export to Catalogue".
If I rename faulty folder, still no change of problem.
However,
If Library > "Show fotos in sub folders" is toggled ON, then the command works as normal, This is not my usual mode, and when I toggle this option OFF, Export to Catalogue fails as before
This problem goes un-noticed so catalogue backup recovery is not viable.
What is the solution for repairing the catalogue or eliminating the bug?
Similar Messages
-
DSO activation failed due to creation of the export datasource failed
hi experts,
i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
please advise, thanks!
attach error info:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
The delta process ODS does not exist
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZFIM_D09Hi,
As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
Regards,
Durgesh. -
The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02
Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren -
Creation of export datasource failed
Hi All.
i copied a bussiness content data source object (DSO) and tried to activate it. it is giving error that
"The creation of the export DataSource failed"
Why ??? where m i going wrong.
Thanks & Regards,
MoHello,
This is the problem becos the system is unable to create DATAMART for DSO object. The following reasons might be hindering the creation of DSO. Please check whether
1) You have proper authorization to create Datasource/Datamarts.
2) If so then, check whether DATAMART for the BW Self Source System is properly Installed from Business Content. (I hope you are working on the version 3.5 or later.. here we need to manually install Aplication Component related to Datamart from Business Content so that Datamart creation never fails after that)
3) Also check BW Self Source System is properly functioning.
Thanks
Kishore Kusupati
Edited by: Kishore Kumar K on Jul 28, 2008 5:35 AM -
"Build and Export Cache" fails to export 100% Previews:
"Build and Export Cache" fails to export 100% Previews:
I am moving from Bridge CS5 to CS6 and have a very large number of 100% Previews in my CS5 cache. The idea of regenerating all these 100% Previews in CS6 is NOT amusing. It is amazing that there is not a simple import function for this task as a way to make the software upgrade more "seamless"… but apparently there is not.
I have read the Adobe documents:
"Bridge Help / Manage the cache | Adobe Bridge CS4, CS5"
"Creative Suite / Work with the Adobe Bridge cache"
Based on these documents, in Bridge CS5 I used the export function in
Tools>Cache>Build and Export Cache…
with "Build 100% Previews" checked
and "Export Cache To Folders" checked.
Unfortunately, the "Build and Export Cache" fails to export 100% Previews to the target directory. They should appear in the target directory as hidden files in the format xxxxx.NEF.JPG. Yes, I do know how to view hidden files in both the Finder and in Bridge.
In Bridge CS5 I tried Purging and rebuilding the Cache for the target directory with no luck.
I tried running "Build and Export Cache" in Bridge CS6…. still no hidden Preview files in the target directory.
My settings in both CS5 & CS6 Bridge - Preferences:
"Keep 100% Previews in Cache" is checked
"Automatically Export Cache to Folders When Possible" is checked
My settings in both CS5 & CS6 Bridge - Options for thumbnail quality and preview generation:
"Generate 100% Previews" is checked
Using OS X 10.6.8
Anyone have a suggestion?????Bridge is the only piece of software I have used, which incorporates a database, where new versions do not provide for importing the objects of the older version. Very strange.
That is a very mildly conclusion but unfortunately until the cache strategy for Bridge is finally sorted out this problem will exist.
Now I have to confess that I can't use the 'Auto export cache when possible' for several versions now due to a rare problem that after the first time usage without problem created export cache almost every second time generates a warning message that due to failure it needs to replace the Cache T file, hence I deselected this option permanently.
I would think that if you have those already cached and exported files for 100 % preview in the dedicated folders it would read those files and add it to the database and central cache file when having pointed Bridge to that folder, but I'm far from sure about that.
Also after rereading your first post you state to expect the build and export cache to build also hidden files with the two extensions from original filetype followed by .jpg from cache in the folder itself (target directory)? Here I'm a bit lost. The mentioned double extension files only appear in the central cache folder and are visible but buried in the subfolders for each quality in the central cache file at user library (default) or custom set location in Bridge prefs.
The exported cache to folder are hidden files and as long as I can remember that where 2 files already in the File browser (forgot the extension they used for this) and currently .BridgeCache (very small, few KB) and the for me problematic .BridgeCacheT file that can grow very large and has about the same size as the subfolder generated under full in the central cache.
I can see the content of the central cache without problem including the double extensions and previews of the files as thumbs in the Finder, jet with option to show hidden files I can see the CacheT file but only as a blank document icon and I can't find an application on my system to open this file to reveal its content.
Just tried it on a folder with small sized files and having set preview quality to HQ and 100 % preview (checkerboard icon in Path Bar) and then used the option from menu tools to build and export cache to folder including 100 %. Both subfolder in Central Cache and about same sized hidden CacheT file where generated without problems and the full preview was instantly on demand using magnifier. (but all this without the option in prefs to auto export to folder)
So to me it seems (if I understand everything correctly) that either the existing exported files from CS5 do cause the problem or your setup of CS6 is not working correctly.
Are we still on the same track or am I completely lost? -
ODS activation error( The creation of the export DataSource failed
Hi Friends,
i have a problem activating the ODS. after defining the ODS, when i try to activate the following error is occured
1.The creation of the export DataSource failed
2.RFC connection to source system BWD100 is damaged ==> no Metadata upload
3.Error when creating the export DataSource and dependent Objects
Any help would be appreciated
ThanksSeems that there are one or more characteristics in the ODS for which one or more attributes may be new or inactive.
Please see SAP Note 597326..Pasting the content below..Solution steps are also given..
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
cheers,
Vishvesh -
The Creation of Export DataSource Failed Error while transporting ODS Cube
Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJHi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan -
Transport Error-The creation of the export DataSource failed
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0BBP_BID
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0BBP_QUO
/ The creation of the export DataSource failed
User not authorized. Session terminated
User not authorized. Session terminated
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0PUR_DS03
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon) -
Dynamic Export table of a function Module
Hi Friends,
I have a requirement where fields of Export table of my function Module is dynamic. It is like the Fields to be expoerted by the Function Module would be stored in a seperate Z table
The Z table would contain the records as follows .
Table Name FieldName
=========
MARA MATNR
MARC WERKS
and So on..
. How can I define my Export table in Function module dynamically so that the structure of my Export Function Module would be same as that of the Fieldnames in Z table..
ThanksJust declare the associate type as "ANY TABLE" in the exporting parameter.
FUNCTION ZTEST.
*"*"Local Interface:
*" EXPORTING
*" REFERENCE(IT_TAB) TYPE ANY TABLE -
The export operation failed to create an image file
I've been experiencing bizarre behavior when attempting to export images to my Usb-connected card reader. After reading some threads on this form, I was convinced that my reader was defective. Same problem on a brand-new reader.
The specific behavior was as follows: I attempted to export roughly 150 custom-named 500 KB image files to the memory card. The last 15 or so failed to transfer and I got the message, "the export operation failed to create an image file for the versions identified below."
Trashing VP list didn't help. What did was changing the custom name. There was nothing particularly unusual about the original custom name and the new one was virtually identical. After changing the name, the export worked without a hitch.
Has anyone experienced similar behavior? Any ideas what's going on?problem was that the NEW card reader was faulty as well. My luck!
-
Database automatic export keeps failing after running for about 24h
Hi,
We have a Sql azure database that is not that big in size (+-4.5 GB) but does have a reasonably large schema (+-12700 tables) Until recently (01 august) we had a daily export scheduled of the database to use as backup. However since the first of
this month, we get daily mails that the export has failed. No other indication is given as to why.
We did notice that the time it took to take the backup increases a lot over time. the time it took to take the export has gone up in one month from 13h to 19h, while the data size of the bacpac file has increased from 647MB to 727MB. has anyone encountered
a situation like this before? My only guess is that the export takes to long to take.
Are there any other options to take a backup? We never needed a backup up until this point, but we don't want to wait with addressing this issue until we actually need it...
best regards,
WimHi,
Please have a check on the below links for Azure SQL Database Backup and Restore.
http://msdn.microsoft.com/en-us/library/jj650016.aspx
http://fabriccontroller.net/blog/posts/backup-and-restore-your-sql-azure-database-using-powershell/
http://blogs.msdn.com/b/wats/archive/2013/03/04/different-ways-to-backup-your-windows-azure-sql-database.aspx
I would suggest you post a feedback on the SQL Database Feedback forum.
http://feedback.azure.com/forums/217321-sql-database
Hope this helps.
Regards,
Mekh. -
CJS-00081 Assertion failed: in function InstallationScript_212()
Hi,
I am trying to install WAS6.4 Sneak-Preview on win2k sp4 (Terminal), J2SE1.4.2_05 and every fresh installation is failing in the "MaxDB Database Installtion" phase with the following error message.
ERROR 2005-06-13 19:45:56
CJS-00081 Assertion failed: in function InstallationScript_212() { var installer = new Installer(); var kdb = new KeyDB(); var context = new Context(); var gui = new Gui();
Any pointers related to this type of failures would be of GREAT!! Help..
Thanks in Advance
AtulThanks for the response sai..
i managed to resolved this particular issue (it was because one of the NT service was not running)
However now the Installtion is hanging at one particular point "MaxDB Database Installation" (phase 5) the last few lines in the "sapinst.log" file are as follows:
installation of MaxDB Webtools finished successfully We, Jun 15, 2005 at 201841
INFO 2005-06-15 201844
The service 'XServer' started successfully on host 'Local'.
INFO 2005-06-15 201852
The service 'SAPDBWWW' started successfully on host 'Local'.
INFO 2005-06-15 201859
Working directory changed to Csapdbprogramspgm.
INFO 2005-06-15 201859
Working directory changed to CProgram Filessapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST.
INFO 2005-06-15 201902
Working directory changed to Csapdbprogramspgm.
INFO 2005-06-15 201902
Working directory changed to CProgram Filessapinst_instdirNW04SR1WEBAS_JAVACENTRALONE_HOST.
installation of MaxDB Webtools finished successfully We, Jun 15, 2005 at 20:18:41
INFO 2005-06-15 20:18:44
The service 'XServer' started successfully on host 'Local'.
INFO 2005-06-15 20:18:52
The service 'SAPDBWWW' started successfully on host 'Local'.
INFO 2005-06-15 20:18:59
Working directory changed to C:/sapdb/programs/pgm.
INFO 2005-06-15 20:18:59
Working directory changed to C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
INFO 2005-06-15 20:19:02
Working directory changed to C:/sapdb/programs/pgm.
INFO 2005-06-15 20:19:02
Working directory changed to C:/Program Files/sapinst_instdir/NW04SR1/WEBAS_JAVA/CENTRAL/ONE_HOST.
My current System Configuration is as follows:
- MS Windows Server 2003 (Enterprise Edition)
- RAM 1 GB
- Pentium 4 2.4 Ghz processor
- 1.4.2_05 J2SE
And i have used both the Installation currently available on SDN site viz.
a)SAPinst_SP_WAS640.exe
b)WebAS640SP9.zip
I have also tried on m/c having Windows 2000 SP4 OS with 2GB of RAM without any success.
I even tried options such as "cancelling" the Installation and resuming it later without any success.
Though the installtion is hanging for MaxDB however it was succefull when tried with MS SQL-Server2000.
Can somebody provide any pointers in resolving this issue?
Thanks in advance..
Atul -
Exporting Custom table through function module
<b>How can i Export Custom table through function module.</b> when we add some table in the function module table tab it asks for a ref. table which is some table in database .. but i want to add some custom table with some user defined column names..how can i do this
<b>n plz tell me how to loop thru select options</b>
i have to loop thru select option and assign all the values to a variable.
plz help me out
Message was edited by:
Karan ChopraHi Karan,
Do one thing, Just in the tables tab give the name of the table and don't write anything else. no TYPE and no ANY.
Hope it will resolve issue.
reward points if useful.
Regards,
Atish -
I went for an interview. there was a simple test before the interview. One of the questions is:
What are the Oracle fail-over functions? which of them can only be used in RAC?
What i can think of is the Transparent Application Failover(TAF). Any other fail-over functions?Connect-Time Failover,
Transparent - Time Failover,
& you can add Load Balancing as well.
1 Client-Side Load Balancing
2. Server-Side Load Balancing.
& More info on this from ML Note:226880.1
1) client side connect time load balance only
2) server side listener connection load balance with client side connect
time load balance
3) server side listener connection load balance only
3) transparent application failover
Message was edited by:
Ravi Prakash -
"The export operation failed because it ran out of memory"
I'm trying to export from Flash CS5 to an mov.
Project is in custom size (874 x 480) but when saved to SWF it's not really
that big (15mb). So I'm a little confused.
Anyone encountered this error message?
This is quite new to me.
I've got 2 HD on my mac with each having at least 2Tb available each,
so don't think its that.
Memory is 8GB and I got nothing running except the Flash CS5.
Need some help my friends. ClientNot sure if your problem has been solved. Flash is flat broken on this. I am using CS6, same problem, same headache. Adobe should be ashamed for not fixing this issue. Someone even suggest to use third party screen capture tool like Camtasia? Why don't you just remove the Export from your Flash menu all together if anything beyong 30 seconds of video export would fail?
In the meantime, Try download Swivel from cnet. The app will happily convert your SWF to anyformat you like. Both Mac and Windows version are available. This was one of the best life saver I ever downloaded from cnet.
HTH
Maybe you are looking for
-
External harddisk became extremely slow after reformat using disk utility
hello everyone~ let me try to describe as clear as possible! to start with, i have 2 external harddisk: hd(A)-120G, format in Mac OS Extended (journaled), it's and old harddisk and is nearly full; hd(B)-200G, format in MS-DOS (ie. FAT32), it's a new
-
How to add some days to the current system date
can anyone help how to add some days to the current date i.e if today is 3-12-2007 and if v add 15 more days then the output should be 18-12-2007
-
Arranging data in excel by using any scripting language like VB, Java \
I need a help in arranging the data in first column into different columns according to equivalent row value. for example. Time Name Class Activity Subject 12 Feb 2014 10:00 AM Robert 5th School started 12 Feb 2014 10:30 AM Robert 5th Break
-
How to lock a row by using 'for update'?
how to lock a row by using 'for update'?
-
Firefox is set to NOT change to a newly opened tab yet it is doing so anyway
Firefox is set in Options to NOT change to the newly opened tab. However, when I open a new tab or open a new window which opens as a tab instead it is automatically switching me to that newly opened tab. I am using the latest version of Firefox afte