Export Clip information for Log Sheet

Has anyone tried to export Clip information into excel? In FCP7 I'd export a Batch List and then import into excel. We have over 2,000 clips logged into CS6 and would like the information in an outside document for our director and assistant editors.
Thanks.

I don't know of any way to get that info out.

Similar Messages

Require Information for Log Archiving

Hi,
I have ECC 6 system with MAXDB 7.6.5.015,
i want to know the step for LOG Archiving.
And also when we have to restore the system what data should we have,
like a complete backup, incremental back and logs .
Can you explain the scenario.
Thanks in Advance.
Regards,
Ritesh Bhatia,

Duplicate due to connection problem

Exporting Clipped images for the Web... CONFUSED! ? Help ..? AI CS3

Hi folks,
I don't use Illustrator as much as I'd like, since my workflow is mostly on
the web, but I'm finding it nearly impossible to export images I receive
from print designers for web use. Many of these images are EPS or AI.
They are clipped images, which is great, BUT when I try to Save for the Web,
the error comes back that they are too large for the web and may crash AI.
OR if I export to PNG or PSD, the files lose their transparency and I have
to extract them manually from the white backgrounds, which defeats the whole
purpose. I have tried opening in Fireworks and Photoshop with the same
result. I've changed the originals from CMYK to RGB, but it doesn't help.
Plus the images export with a huge crop area instead of just the image
itself.
I'd really like to be able to use AI, but I'm finding this situation
unworkable. I am sure I'm missing something simple , but I'd appreciate any
help greatly!
Thanks
Jeff
~~~~~~~~~~~~
Jefferis Peterson, Pres.
Web Design and Marketing
http://www.PetersonSales.com

Thanks for your help Jean et al.
I only use Illustrator occasionally and when I have to. Not because I don't
like the idea, but I'm almost completely web oriented and I find its layout
is not as instinctive and smooth as Fireworks, and I use Photoshop for
original layered images. The problem comes when I get a file from a printer
who uses Quark and knows nothing about web prep and exporting for other
uses. He couldn't export a layered file for some reason even though he had
the backgrounds layered for print work.
You are right, I've opened the tiff and eps docs from the printer before and
played with them in AI, and saved them to ai native formats. I *thought* the
eps files were created in ai by the printer, because they had the clipping
paths and artboards. Obviously they were not. They had just opened with the
default 14400 artboard which is why I thought they had been "set." So when I
set the new 30x30 custom, I started seeing these files with a new
artboard...
So, in sum, I first tried to use these files in Photoshop, but they open
as flat files and the clipping paths are lost. Only by experimenting with
ai, did I find the files had clipping paths. I guess what threw me was that
ai could extract clipping paths from eps that Photoshop could not.
Jeff
~~~~~~~~~~~~
Jefferis Peterson, Pres.
Web Design and Marketing
http://www.PetersonSales.com

More than 1 AAA server for logging in to WebVPN

Hi everybody,
Does anyone know if ASA supports simultaneous authentication more than 1 AAA server? I've created LDAP and SecurID token account for every users and want them provide both account information for logging in to WebVPN.
Please advice.
Thanks for advance,
Nitass

If you are aaa server you are referring to is "radius server", then you can try out the following commands.
In ASDM you would simply add the said RADIUS servers to the "server group"
If you wish to do this through CLI, you would define a group eg
aaa-server radius protocol radius
aaa-server radius host x.x.x.x
aaa-server radius host y.y.y.y
aaa-server radius host z.z.z.z
and you would then call this in the said tunnel-group :
tunnel-group opsource type ipsec-ra
tunnel-group opsource general-attributes
address-pool admin_ra
authentication-server-group radius LOCAL
default-group-policy opsource

RPC request to the Microsoft Exchange Information Store service for log truncation

Hello all
Running Exchange 2013 CU3 on Windows 2008R2 sp1 in a two node DAG. We are seeing the bellow warning when running a backup. How to resolve this?
RPC request to the Microsoft Exchange Information Store service for log truncation failed for database CoramB3\Servername. Error: Failed to notify source server 'servername.coram.com' about the local truncation point. Hresult: 0xc8000713. Error: Unable to find
the file. Also log files are not being flushed
Bulls on Parade

Hello,
Please verify backup software.
Please use vssadmin list writers command to check the status of the VSS admin. If it is in a
failed state, please restart the Exchange replication service and then check the status again.
Please use Get-MailboxDatabaseCopyStatus cmdlet to view health and status information about mailbox database copies.
Please use Get-DatabaseAvailabilityGroupNetwork “DAG Name” | fl cmdlet to view configuration and state information for a DAG network.
Please use Get-DatabaseAvailabilityGroupNetwork DAG Name\MAPINetwork | fl cmdlet and Get-DatabaseAvailabilityGroupNetwork DAG Name\ReplicationNetwork | fl cmdlet to
check configuration information for MAPI network and Replication Network.
If the above configuration information is ok, please check if there are other related errors in application log.
Cara Chen
TechNet Community Support

Using bridge for logging clips

Do any of you use bridge exclusively for logging in your field clips? And if so, do you know if it is possible to then print out the results in order to have a hard copy? Thanks,

The Yahoo! Toolbar extension and the Babylon extension have been reported to cause this issue. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Capacity leveling log showing duplicate information for Resource

Friends,
Need one help.
When I am looking into the Capacity leveling logs, I see duplicate information for every Resource. There is no difference in the information regarding resource utilization (before/after). For every resource we are getting this duplicate records in the logs. Sometime there is one difference on timing, (when the resource was processed by the background job.)
Text . Details . Current Date . Time
Resource W10_U0JA_001
Parameters
Resource utilization
Resource W10_U0JA_001
Parameters
Resource utilization
There is no difference in details resource utilization, yet resource are shown two times, for every resource.
We are on SCM 7.0 . Is this standard? if so, then why?
Can you please share your opinion/thoughts. Thanks a ton.
Satyajit

Hi Satyajit,
This can happen because of resource setting in APO.
You need to check the following:
Bucket definition
Resource utilization
Time Zone
You should check also the "Time-Cont Capacity" tab details where start, end and break time is maintained,
You should also verify the "External Capacity" Tab data
There is no other reason apart from that.
You can also check the PPMs which are using this resource and some setting in PPM modes and other operation data.
If it is okay then possibility you need to check the model and version assignments.
You can remove the version assignment and delete the resource and again CIF it to APO.
Possibly it will help.
Regards,
Vishal

Exporting clips for Powerpoint

I'm trying to export clips to use in a Powerpoint presentation which I thought would be relatively straightforward to do but I'm having trouble with the whole exporting thing..!
Could anybody guide me on what I need to be exporting the clips as because when I tried it the first time and took the files over on a cd to the PC, it didnt recognise them. Do I export from just Quicktime or should I be doing the Quicktime conversion? And do I need to have a certain type of Quicktime Player available on my PC or can it be played from my Windows Media Player?
Any help would be much appreciated!
Cheers x

hi
thanks for your suggestions. I do have QuickTime installed on my PC and so far I have tried to export them as avi files but when I put it on the PC, an error came up saying 'a codec is required to play this file' (on Windows Media Player). I've just been reading up on some stuff about codecs and file formats on the web and manual but it's a little confusing..!
how would I transcode them to MPEG-1? Also, when the WMP failed to play the clip I tried to open it with the QuickTime Player - it came up but the image quality was quite reduced and there didnt appear to be any sound..is there something else I should be doing with my video sequences before I export them?
thanks again for your help! you might be able to tell I'm pretty new to all of this!
jen x

How to export clips to After Effects for Compositing

I want to export clips from my timeline into After Effects to add some compositing of clouds and sky replacement.
FCP 7
AE CS5
OS 10.6.8
I dragged the clips from my timeline back into the Browser into a new bin but when I export from there, the dimensions aren't the same as my project.
My project is 1920x1080 and when I export the edited (spliced) clips from the browser, they're 720.
I don't want to go into my raw files and try and eyball where I spliced the clips b/c each video file is about 2 gigs and I'm only using a small section of each clip.
Any suggestions on how to do this?

It is much easier just to use Automatic Duck's Pro Import AE which will allow you to send your timeline to AE.
AE will use the existing media that is called for by the FC timeline, you don't have to copy/export the media files.
Used to cost several hundred dollars, now FREE as the creator has gone to work for Adobe.
http://www.automaticduck.com/products/piae/
P.S. The site says it is compatible up to CS5.5 which was current when development was stopped, but I use it in CS6 with no problem.
MtD

Lyx: No information for exporting the format PDF (pdflatex)

After lyx installation the system prompts me:
Optional dependencies for lyx
texlive-latex3: pdf export
So I did install this package, but even then I couldn't find a way to export to pdf.
But not only pdf. PS and DVI is the same:
"No information for exporting the format DVI"
"No information for exporting the format Postscript"
Does anyone have any idea about what's wrong here, how to workaround or better, to fix this?
Thanks!

LyX works well (I'm using it every day right now), so there is a solution somewhere. Perhaps there is a missing dependency in the package.
Does LaTeX work by itself? i.e. Can you produce a simple DVI file from a minimal LaTeX file?
Start LyX from a terminal command line. Then click on Tools->Reconfigure. Does the output show anything really suspicious missing? You will see a lot of "no"s, but that is okay. You will definitely want to see a "yes" for latex, xdvi, and dvips. If you have never started LyX before, you pretty much have to do this the first time to set up your configuration before anything will work.
Try that much, then post again.
Mike

Always prompting of log in information for users

I have a requirement to always prompting of log in information for users in SharePoint site rather than taking their logged in credentials.
Any idea??

To deactivating Windows-Integrated authentication and use basic authentication. Refer to the following post for more information
http://sharepoint.stackexchange.com/questions/61652/force-users-to-log-in-to-our-sharepoint-intranetsite
http://sharepoint.stackexchange.com/questions/68784/how-to-set-default-login-with-windows-prompt-for-all-intranet-users
--Cheers

Job that must be programmed to collect information for system log (sm21)

Please, Who is the job that must be programmed to collect information for system log (sm21) ?
Thank you very much.
Hugo.

Before you reinitialize your log shipping configuration, check to see if you can take a differential backup and restore that on top of your standby database. This is relatively easier than to take a full database backup just to reinitialize
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course
I can take a diff backup.. But in my secondary, when i right click standby >tasks-->restore-->i can see only option to restore transaction log file. Other options are greyed out. How can i restore a diff backup now. If i bring the DB online with
restore with recovery, i have to restore a full backup before i can apply a diff backup.
Somebody provide me insight on below error
This secondary database is not functional because
the required copy or restore job cannot be found. You must remove this secondary database by clicking Remove. To resume log shipping to this secondary database, add it as a secondary again using the same settings.If
you resume log shipping and you specify the same restore path that you used before, any backup files that are uncopied or unrestored to this database will be copied and restored when it is added as a secondary again. Reinitializing the secondary database
is unnecessary."
I can see the LS_restore job and the job is running as per the schedule, we dont run copy job because
the backup directly falls in secondary server. wats the reason for the above error.

Preserving Source Clip Information Upon Export In Premiere

Is there a way to export clips from sequence timeline and preserve source clip metadata?
Example - I have a clip I used warp stabilizer on and I have marked the clip with in/out. Now I would like to export the clip with same clip name and source timecode and hoping there is a setting to do so.
Thanks, Chris

[Please manually type your posts into the browser. Copy/Paste leaves unwanted code throughout.]
span style="color: #000000; font-family: Arial, Helvetica, Geneva, Swiss, SunSans-Regular; font-size: 12pt; background-color: #6b7fa0;

Exporting Clips for use in another application

I want to export clips from Final Cut Pro X version 10.1.1 retain the clips in Final Cut and be able to use the clips in premiere. Any ideas.

I copied the entire Final Cut library from one hard drive to another before trying the consolidate function. I used the consolidate function and ingested the media copies into Adobe Prelude and backed that up to another hard drive. I am at the beginning of making a documentary which has turned into a huge project. I am working across platforms but have decided the end product will be in Adobe Premiere. I have decided this because many of the people I am working with being editors and graphic designers work with Adobe products. I like Final Cut Pro X but people in the industry have reacted against it thus forcing these decisions.

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Export Clip information for Log Sheet

Similar Messages

Maybe you are looking for