Export Control: list of blocked orders is incomplete (ENGK, RVEXAU03)

Hi community,
I have a strange behaviour on the system.
We have activated the credit control some months ago. When there are some orders blocked by credit control, a collegue opens transaction ENGK and runs the report of blocked sales order (report RVEXAU03).
In normal case there isn't problem by doing this, but from time to time it happens, that a blocked order is not shown, although there hasn't been found a control license by the order.
I suppose that this behaviour depends on the date when the orders have been created or there are already created following documents (deliveries).
Anyone any ideas?
Christian

dear friend,
you would check out those orders using t-code VKM1
regarding RVEXAU03 please make sure the select-option parameters are correct (especially Blocking reason checkboxes)
good luck!

Similar Messages

  • The list of blocked invoices is incomplete

    Hello,
    I have encountered a situation when running T-code MRBR to list all blocked invoice however get one message as below:
    The list of blocked invoices is incomplete
    Message no. M8 657
    Kindly suggest us why So.
    Regards:
    Tata Reddy

    > The list of blocked invoices is incomplete
    > Message no. M8 657
    If No Invoice is Blocked Stocastically then only you will get this Message.
    Please Select Proper Blocking Procedure.
    You Can Select
    Blocked Due to Variance
    Manual Payment Block
    If You Select Stocastically Block Option System will show the List if Docuemnts are Stocastically Blocked Otherwise it will throw an error.

  • Need a user exit for Export Control check in Sales Order fro VA01/VA02

    Hi ,
         I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ‘ultimate destination country’ User Exit needs to be built in with following logic
    1.     Check to see if ‘ultimate destination country’ field is maintained in Sales Order
    2.     If a value is maintained then for the Export control checks use ‘ultimate destination country’ instead of the Ship-To country (step 1)
    3.     If no value is maintained then use Ship-To country as default
    The user exit is called when the user creates or changes a Sales Order.
    Can anybody help ?
    Thanks

    Hi,
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    <b>Reward points</b>
    Regarsd

  • Message no. M8657, The list of blocked invoices is incomplete

    Hi Experts,
    The MRBR report is processed to list all invoices in Release block, however it is in-complete and SAP displays an information message to alert this.
    This means that there are blocked invoices in SAP that users are unaware of and this could result in invoices being paid late.
    Can you let me know why MRBR doesn't list all invoices in Release block and what action needs to be taken to rectify this.
    We are facing this probelm in ECC 6.0
    Can you please look into this and confirm why this is happening.
    Many thanks
    Vikas

    Hi Vikas,
    You can probably have a look at OSS note: Note 777367 - MRBR: Job terminates.
    Symptom
    You define a background processing job in several processing steps for the report RM08RELEASE. If no list is created during the first step, the system terminates the job, even though there are still more steps to be carried out.
    Kind Regards,
    Prakash

  • Update Tariff Number,Export Control List and Grouping in /sapsll/product_02

    Hi Experts,
    I am trying to update/change Tariff Number(CCNGN) in Classification tab and Legal Regulation(LGREG) and Grouping(CONGR) in Legal Control tab.
    Can i use class : /SAPSLL/CL_PR  for updating the above fields?
    In class /SAPSLL/CL_PR - in any method,i could not find any structures to fill data related to Classification Tab.
    For Grouping i can fill in /SAPSLL/PRCON_T structure
    Can any one please suggest relevant class - method for updating data in Classification Tab.
    Any suggestions would be helpful.
    Regards,
    Karthik Rali.

    Hi Karthik,
    Class /SAPSLL/CL_PR contains the Structure set GT_PRCTS, and Method MAINTAIN_SUBOBJECT seems to take care of it.
    If I am missing your point, please explain further - thanks.
    Regards,
    Dave

  • List of blocked sales orders

    Dear Gurus,
      Do we have any standard transactions to find list of blocked sales orders for different reason.I  checked we have only for credit management the transaction code  is :VKM3 & For back order  processing  we have  transaction code : V_RA &  can we use the same transaction codes for different kind  of blocked sales orders for various reasons (  ex: Blocked for free of charge delivery , poor qualiy of goods ,political reasons , bottle necks   etc reasons )
    Looking for your inputs
    Thanks inadvance
    Regards
    Venkat

    Dear Venkat,
    If I'm right the issue is that you want to display all those documents whose credit limit is zero.
    You can get all the list through vkm3  and sort it in ascending order.
    For sorting click the cursor on the credit value column and use sort buttons available in application tool bar.
    Kindly let me know if it can solve your issue.
    Best Regards,
    Rajesh.

  • Standard T Code to release list of sales orders in 'Delivery Block'

    Dear All,
    Is there any standard transaction code in SAP which provides the facility to release list of sales orders in 'Delivery Block'. (Additional information - List of sales orders in 'Delivery block' is available in V.14,however it does not have release facility).
    For example, VKM3 gives the list of sales orders in 'Credit block' with release facility.On the same lines, is there any standard T code or any other facility in standard SAP which provides the facility to release list of sales orders in 'Delivery Block'.
    Thanks and Regards,
    Zahid

    As already suggested, if you execute VA14L you can see all sale orders that are blocked at
    -  header level
    -  item level
    -  credit check
    Wherever you see "X" under the tab Header level, double click on the respective sale order, so that system will take you to sale order in change mode.  You can remove the header level delivery block and save.
    thanks
    G. Lakshmipathi

  • How to export the material list during sales order creation

    Hello,
    In VA01 while creating Sales Order is there are an option to export a list of material numbers at one shot?
    I have about 400 materials to create in 1 sales order. It's time consuming to enter one by one manually.
    Please help. Will reward points.
    Pri

    Hi Pri,
    Go to VOV8 transaction check the document type PV -Itemproposal if not there then define the document type for Itemproposal.
    You copy the Standard OR type do these settings only
    Sales document type PV Item proposal
    SD document categ. D
    Screen sequence grp. MA
    Transaction group 5
    Doc. pric. procedure C
    Display Range UALL
    FCode for overv.scr.UER1
    Propose deliv.date give chek mark    
    Define the number range and assign number range.
    Noe you try
    I hope it will help you,
    Regards,
    Murali.

  • Foreign trade data - Blocking orders for embargo countries

    I have now seen this process in my test system. I can still enter an order for a country who is marked for embargo and it saves. It will also give me a confirmed date for the goods and the requirements do still show up on MD04.
    It does show up on the blocked document list in FTD as blocked because of an embargo but this doesn't make sense to me.
    If there is an embargo, why would SAP promise the goods?? It seems like it should not confirm the order or transfer the requirements to the plant.
    Is this how other people are seeing the Embargo countries process work or am I still missing something in configuration??
    Any and all help is greatly appreciated!!
    Debbie

    I believe it does allow you to create order. Then the processing (delivery/shipment) is stopped until you release(approve) this particular order by entering appropriate license in export control.

  • Firefox Help page on "blocking cookies" is incomplete and refers to a "tool" menu that does not exist

    The following page:
    http://support.mozilla.com/en-US/kb/Blocking%20cookies?s=blocking+cookies&as=s
    is incomplete - please see as example:
    "Viewing a list of blocked sites
    To see a list of sites that you have blocked from setting cookies: "
    There is no text after the colon.
    Also the same page refers to selecting a "Tools" menu from the Firefox window(whatever that is?) - in order to get "Page info" so that cookies can be blocked. I can't the Tools menu - clicking on the Firefox (at top left hand of page) does not give this option.
    I was looking at this page in order to find out how to permanently block specific cookie sites. I block them when they appear when I have set "accept 3rd party cookes to "keep until" - "ask me every time" - and I also have "clear history when Firefox closes" set. However the blocked addresses are deleted when I come out of Firefox - this is very irritating as there are some cookies I wish to permanently block. This means that every time I open a web site I have to click on "deny" cookie several times - even thought they are the same ones I have blocked in a differenrt session. I prefer to choose what I block as some sites really don't work without their personal cookies - usually to support subscriber log in (e.g to log in to the "New Scientist" site)so "private browsing" doesn't really help and as you have mentioned elsewhere blocking 3rd party cookies can also cause problems
    yours
    H.Ruddy
    Thank you for "Do Not Track" it's a good start although it will have no effect if the sites ignore it.

    Looks like a problem with show for that is only specified for Firefox 3.5 for that section.

  • List of Sales Orders

    Hai all,
    1. I want to know the list of sales orders that are billed and the list of sales order that are rejected?
    2. How to block a sales order totally(Shall we have to reject each item or is there any provison at the header level So that I can reject the total sales order.
    Regards,
    Keyur

    Hi Keyur P,
              2)-
             Blocking sales order will be done at Header level. To do thus
    u have to customize the doc type. as we know sales document header level will be controlled by sales doc type. so if u want to block u need to customized the doc type. Or else to reject the items individually only option.
    Hope this helps, reward points

  • Crypto export control issues when redistributing the JRE

    Does anyone have experience or knowledge about export control procedures when redistributing the JRE (or openssl for that matter) since it does contain crypto API's? I have tried to understand the US Export Administration Regulations (EAR) but I'm still unclear on this if I were to distribute from freshmeat or tucows. There are alot of references to an ECCD-5D002 list of software that I cant find. I believe the EAR states that if the software is on that list, that it is ok for exportation without review. I was hoping someone in the developer community could answer this foe me.

    Thanks for the link. It answered some questions although not the one I'm asking here. I basically just need to know if I can bundle the JRE into an application and distribute it over the Internet or what I might need to do in order to do that.

  • Export control

    Hey all,
    I have one question regarding the export control of materials. For some materials it´s only allowed to send them in certrain value or quantity into some countries. I know that there is a possibility to enter an export license, but this is a very manuel process.
    The limit of the materials (value or quantity) depends on the harmonized code and the country. If I would like to enter a new order in the retail system, could the system give me a note that I have some materials in my order which are under export control? For me its important that there is a automatically process.
    BR
    Sven

    Hi Sven,
    If I can understand you correctly, you have asked about a dialog to be given up in the Feeder( Retail) system incase any of your feeder materials requires licences.
    For the above query, I want to clarify you that the licences determination in SAP GTS is automatic based on the defined parameters and only requires manual intervention in case of initial set up and Incase of any non required blocks to analysed/released.
    Here, we can have two cases ,when you will create a order in the Feeder (Retail) system, These are as follows:-
    If a licence exists for product:- In this case, license will be automatically be assigned to the Material and the order will go through without any issues in the feeder and GTS systems
    If a license doesn't exists for the material in the GTS system:- If a license doesn't exists for a particular material and that material is included in some order in the feeder system , then since no license exists in this case, hence the concerned order will be blocked for subsequent processing in the feeder system. In this case, a dialog will appear once the order is saved displaying the legal control block. For this, you can analyse the block or if required also release it in the GTS system to carry on your transaction.
    I guess, I have already cleared the air to a great extent. Incase of any further queries, please let me know it.
    Regards,
    Aman

  • Report generation for Delivery Blocked Orders

    Hi All,
    I am trying to pull up a report which should contain only orders with the Delivery Block.
    Through VL06O i can get the orders which need to PGIed, which are open, which are stuck in workflow and which have got delivery block.
    So is it possible to separate the delivery blocked orders (from an end user point of view) from the other orders. I tried to have a look at the filters which i could put on the VL06O-> Outbound Deliv. for PGI, but couldn't find it.
    can any one help in thi regard.
    Thank you in advance.

    Hi,
    Try report V.02 - Incomplete Orders

  • List of open orders

    Hi Guys,
    How to get list of open orders in table??

    try out VA05.
    if it is sales office level information, is required then you can have the sales office column added using the available layout options in VA05.
    if the sales man is marked under partner function, then you may need to extract the VA05 output & filter the sales order using VBPA table with parameters of sales man controlled in the selection screen.
    rgds
    ilango

Maybe you are looking for

  • Itouch not responding in computer

    Hi, My Itouch does not show up in itunes in any computer(I've tried three different ones), and will not show a charge icon when just being charged in the wall (but somehow charges).  The last time it showed in the computer I think I pulled it out of

  • Should i use a separate HDD for Logic?

    I've read some info that using a separate drive for Logic improves performance, so it is an option I am thinking of taking. BUT does having an external drive connected via firewire800 actually outperform the internal drive (performing all tasks) conn

  • 2330 classic - main screen layout

    just got a nokia 2330 classic 1) Is there any way to change the default main screen layout of the phone? can you change the digital clock ot an anlogue one? can you add your appointments of that day that are in the calendar? now the standard main scr

  • Logical column using data source from 2 generations of same hierarchy

    Hi experts, I'm using Essbase as my data source in CEIM physical layer, and I have a hierarchy called "Entity" which contains different level of companies, in Generation 2 I have only one member called "group totals" and in Generation 3 are 5 members

  • HT201415 iPad with problemm

    I decided to write a lot more to understand that Apple need to know how and can be disappointed with a product. The exact 12 months made a purchase of a product believed to be top of the line and reconhecidissimo the market. I searched and understood