Export control

Hey all,
I have one question regarding the export control of materials. For some materials it´s only allowed to send them in certrain value or quantity into some countries. I know that there is a possibility to enter an export license, but this is a very manuel process.
The limit of the materials (value or quantity) depends on the harmonized code and the country. If I would like to enter a new order in the retail system, could the system give me a note that I have some materials in my order which are under export control? For me its important that there is a automatically process.
BR
Sven

Hi Sven,
If I can understand you correctly, you have asked about a dialog to be given up in the Feeder( Retail) system incase any of your feeder materials requires licences.
For the above query, I want to clarify you that the licences determination in SAP GTS is automatic based on the defined parameters and only requires manual intervention in case of initial set up and Incase of any non required blocks to analysed/released.
Here, we can have two cases ,when you will create a order in the Feeder (Retail) system, These are as follows:-
If a licence exists for product:- In this case, license will be automatically be assigned to the Material and the order will go through without any issues in the feeder and GTS systems
If a license doesn't exists for the material in the GTS system:- If a license doesn't exists for a particular material and that material is included in some order in the feeder system , then since no license exists in this case, hence the concerned order will be blocked for subsequent processing in the feeder system. In this case, a dialog will appear once the order is saved displaying the legal control block. For this, you can analyse the block or if required also release it in the GTS system to carry on your transaction.
I guess, I have already cleared the air to a great extent. Incase of any further queries, please let me know it.
Regards,
Aman

Similar Messages

  • Export Control /Legal control: need user exit to customize

    I have a situation where I want to determine the export control license for a sales order. SAP uses the function module RV_EXPORT_CONTROL to carry out the required check.
    The FM uses the country defined for the ship-to-party as the destination country and carries  out checks to determine if there is an embargo for the good in the line item to destination country.
    My requirement is that the actual destination country or the ultimate destination country ( which is known and not same as the country of the ship to party ) be used to carry out the embargo check.
    I could not find any user exit/badi for the same. Is there a way to achieve this functionality. It has been hard coded in the FM. Can we do any customizing settings to achieve this? I could find two partner function EU ( End user for foreign trade ) and UC ( Ultimate Consignee )...can these be somehow used/ configured to achieve the desired functionality? Or is there any other different approach to the issue.
    Currently I plan to copy the standard FM and add my functionality. I will turn off the standard export control and then I i will call the custom FM in the end ( userexit_save ) as the export control is carried out at save.
    Any suggestion/approaches will be appreciated.

    I too have same issue,  from where the Fm  RV_EXPORT_CONTROL is triggering
    Edited by: erakarthi on Jul 14, 2011 8:44 AM

  • Export control Check error

    Hello,
    I'm trying to activate the instance "Demo Appliance landscape for OpenSap Course Introduction to SAP Fiori UX" but i got this error:
    "Error: We are sorry, we cannot provide you with the solution due to the results of an export control check."
    Any suggestion?

    Hi Stanimir Eisner
    I am facing the same problem. can you please help me?
    Thanks and regards
    Md. Aman Ullah

  • The export control function on my QT 7.6.9 will no longer allow me to export mov as wav files.  I have the Pro version and a QT license.  What shall I do?

    The export control on my QuickTime Pro 7.6.9 no longer allows me to export mov audio files as wav.  I have a user license number.  Should I unintall and re-install?  Will I be able to quote my current license number to avoid having to pay again?  Help!

    The export control on my QuickTime Pro 7.6.9 no longer allows me to export mov audio files as wav.
    Are you saying the option is missing or that it is grayed out? If grayed out, what is the audio compression format used in the MOV file container?

  • Need a user exit for Export Control check in Sales Order fro VA01/VA02

    Hi ,
         I need a user exit for Export Legal Control process in Sales Order.since Ship-to country in the Sales Order is not always the ‘ultimate destination country’ User Exit needs to be built in with following logic
    1.     Check to see if ‘ultimate destination country’ field is maintained in Sales Order
    2.     If a value is maintained then for the Export control checks use ‘ultimate destination country’ instead of the Ship-To country (step 1)
    3.     If no value is maintained then use Ship-To country as default
    The user exit is called when the user creates or changes a Sales Order.
    Can anybody help ?
    Thanks

    Hi,
    Exit Name Description
    SDTRM001 Reschedule schedule lines without a new ATP check
    V45A0001 Determine alternative materials for product selection
    V45A0002 Predefine sold-to party in sales document
    V45A0003 Collector for customer function modulpool MV45A
    V45A0004 Copy packing proposal
    V45E0001 Update the purchase order from the sales order
    V45E0002 Data transfer in procurement elements (PRreq., assembly)
    V45L0001 SD component supplier processing (customer enhancements)
    V45P0001 SD customer function for cross-company code sales
    V45S0001 Update sales document from configuration
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order
    V45W0001 SD Service Management: Forward Contract Data to Item
    V46H0001 SD Customer functions for resource-related billing
    V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
    SDAPO001 Activating Sourcing Subitem Quantity Propagation
    <b>Reward points</b>
    Regarsd

  • For PCI-GPIB NT, what is the ECCN (export control classification number)

    I have an interest in shipping the interface card to another country, for PCI-GPIB NT, what is the ECCN (export control classification number?

    The best way to get an ECCN, HTS code, country of origin or anything else related to exporting product from the United States is to send an e-mail to [email protected] or call 1 (512) 683-6010.

  • Crypto export control issues when redistributing the JRE

    Does anyone have experience or knowledge about export control procedures when redistributing the JRE (or openssl for that matter) since it does contain crypto API's? I have tried to understand the US Export Administration Regulations (EAR) but I'm still unclear on this if I were to distribute from freshmeat or tucows. There are alot of references to an ECCD-5D002 list of software that I cant find. I believe the EAR states that if the software is on that list, that it is ok for exportation without review. I was hoping someone in the developer community could answer this foe me.

    Thanks for the link. It answered some questions although not the one I'm asking here. I basically just need to know if I can bundle the JRE into an application and distribute it over the Internet or what I might need to do in order to do that.

  • Export Control Classification Number and CCATS Number Request for "Mozilla Firefox"

    Please provide the Export Control Classification Number (ECCN), License Exception Status and CCATS Number for "Mozilla Firefox"
    Thanks

    https://wiki.mozilla.org/Deployment:Deploying_Firefox#United_States_Export_Control_Information

  • I got export control check error

    Hi
    I'm trying fiori excerise from Introduction to SAP Fiori UX in openSAP,
    but, having trouble with trying solution from export control check failure.
    Any suggestion?

    Hi Young Hwan Kim
    Now you should be able to use this solution.
    Best Regards,
    Tsvetinka

  • Microsoft Bing Translator API "export control classification number"

    Dear administrator:
    Would you share me the ECCN (Export Control Classification Number) of Bing Translator Hub? Thus I would know whether is it okay for me to use such in China (PRC) mainland?
    Best Regards

    Hi Jun,
    Can you please contact is on www.microsofttranslator.com/contact to provide more details about your request? We are not familiar with this document.
    Olivier
    Microsoft Translator team - www.microsoft.com/Translator

  • Export Control: list of blocked orders is incomplete (ENGK, RVEXAU03)

    Hi community,
    I have a strange behaviour on the system.
    We have activated the credit control some months ago. When there are some orders blocked by credit control, a collegue opens transaction ENGK and runs the report of blocked sales order (report RVEXAU03).
    In normal case there isn't problem by doing this, but from time to time it happens, that a blocked order is not shown, although there hasn't been found a control license by the order.
    I suppose that this behaviour depends on the date when the orders have been created or there are already created following documents (deliveries).
    Anyone any ideas?
    Christian

    dear friend,
    you would check out those orders using t-code VKM1
    regarding RVEXAU03 please make sure the select-option parameters are correct (especially Blocking reason checkboxes)
    good luck!

  • Update Tariff Number,Export Control List and Grouping in /sapsll/product_02

    Hi Experts,
    I am trying to update/change Tariff Number(CCNGN) in Classification tab and Legal Regulation(LGREG) and Grouping(CONGR) in Legal Control tab.
    Can i use class : /SAPSLL/CL_PR  for updating the above fields?
    In class /SAPSLL/CL_PR - in any method,i could not find any structures to fill data related to Classification Tab.
    For Grouping i can fill in /SAPSLL/PRCON_T structure
    Can any one please suggest relevant class - method for updating data in Classification Tab.
    Any suggestions would be helpful.
    Regards,
    Karthik Rali.

    Hi Karthik,
    Class /SAPSLL/CL_PR contains the Structure set GT_PRCTS, and Method MAINTAIN_SUBOBJECT seems to take care of it.
    If I am missing your point, please explain further - thanks.
    Regards,
    Dave

  • Foreign Tade: Import, Export & Control

    Hi Experts,
    Can any one please input me the step by step IMG settings for Foreign trade Import & Control.
    Thanks in Advance, Suresh

    Hi,
    Refer
    http://help.sap.com/saphelp_47x200/helpdata/en/93/74440d546011d1a7020000e829fd11/frameset.htm
    Go to SPRO > MM > Purchasing > Foreign Trade/Customs > Control Foreign Trade Data in MM and SD Documents
    Incompleteness Schemas for Foreign Trade Data (VI29)
    Here you can define Incompleteness procedures and include fields which you want and keep field control as "3" i.e. Required field - Incompletion check active
    Foreign Trade Data in MM and SD Documents (VI49)
    Here you can assign the incompleteness procedure to Country Key.
    Import Screens In Purchasing Document
    Here for your Company Code, keep Import Data as "1" i.e. Call up import data screens for every import or "3" i.e. Always call up import data screen
    Check in ME21N.
    Thanks & Regards,
    Kiran

  • Export controls - Encryption Products Concern

    Hi,
    There is some concern on shipping of encryption product families to certain countries.
    How do we achieve this, do we have std functionality in GTS or we need a flag such products products in ECC to meet the regulatory obligations.
    Can somebody throw somelight on this as to how to achieve on SAP GTS?
    Thanks in advance,

    Hi,
    If you have preference processing service activated in Risk management. you can define base rules and additional conditions for preference processing. If the product fulfills the additional condition, you set the Condition OK indicator. You only set this indicator for products that meet the assigned additional condition. The system evaluates the indicator when determining the preference.
    This specifically helps when you trade in  loops of regional trade agreements and have to determine whether the product fits in the preference eligibility criterion of varied regional trade agreements.
    Otherwise: A license is triggered with the combination of Control Class (ECCNs), Country of destination and departure, Partner etc.
    So, Even if the preference processing is not activated. We can Control the shipments of a specific ECCN to certain countries through license.

  • U.S. Export Control Classificaiton Information - JAVA Software

    Can someone please assist. I am in need of knowing the following:
    1 Export Classification ECCN numbers for the following JAVA free download software:
    J2sdk1.4.2
    J2sdk1.5.0_12
    J2sdk1.6.0_13
    J2sdk1.4.2
    2 If any of the software is encrypted? If yes, please provide encryption level i.e.: 64 bit, 128 bit. etc.
    3 If this software is subject to one time BIS notificaiton, please provide CCATS number for each
    Thank you
    Debby Mayberry

    Not sure if this forum can help you with your question. This forum is meant for the Oracle GRC products. Try the Java Forum - http://forums.oracle.com/forums/category.jspa?categoryID=285

Maybe you are looking for