Export creates a FCP quicktime and an AV1 and AV2 file. What?

So when I export my sequnce which is DVpal FCP creates a movie and two AV files, called AV1 and AV2, which nothing will understand. I can't open the movie any longer. FCP didn't always do this to me. So whats up. I can't for the life of me think what option I have checked or prefrence I have toggled to make it do this or if FCP is toying with me at this crucial moment, onlining. How do I solve the problem. Again the Manual has failed me so I call upon you the collective wisdom of the internet to fuggest a solution. Thanks again.
Peter

Sounds like you exporting to a hard drive that is formated for ms-dos.
Take a look at the properties of the drive using Disk Utilites. If the format is not Mac OS Extended, it needs to be reformated.

Similar Messages

Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
Brent

Hi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue

I tried to export an iMovie to quicktime and got this pop up message, "file is already open with write permission" How do I resolve this. thans

I tried to export an iMovie to quicktime and got this pop up message, "file is already open with write permission" How do I resolve this. thans

Turn off Time Machine before you open iMovie. It's a semi-known issue right now.
https://discussions.apple.com/message/17032254#17032254

I use a PC - I need to open ai and eps files - what adobe program do I need to purchase?

I use a PC - I need to open ai and eps files - what adobe program do I need to purchase?

You need Illustrator to open .ai files. That is, if you want to edit them.
If you just need to place them, then tell us what you want to do with the files.

How to export iPhoto slideshow to quicktime and then view on video iPod?

How do you export a slideshow to a Quicktime movie (from iPhoto) so that the resulting Quicktime movie is then viewable on an iPod?
I've exported slideshows (with transitions, specified Ken Burns effects, music, etc.) to Quicktime movies to try to view these on my iPod. I don't want to view my photo albums since they don't have of the effects that the slideshow has. There is an option to save the slideshow in a small file size that is presumably viewable on an ipod. About 80% of the time, however, the Quicktime movies are then NOT viewable on my iPod. My iPod just freezes when I try to start the movie.
Here are the steps I use to export
1. From iPHoto Select the slideshow / File / Export / select small movie
2. From iTunes / File / Import / select the Quicktime movie that was created from the slideshow
Background info
1. Apple G5 purchased in 2003, 2 CPUs, CPU Speed 2 GHz. Memory 2GB. Bus Speed 1 GHZ. CPU TYpe PowerPC 970 (2.2)
2. iPhoto '08 version 7.1.1 (354)
3. Video iPod purchased in May 2006. (60 GB). Uses iPod software version 1.2.3 (most current version for this iPod)
4. Quicktime Player version 7.3.0 Player Version 7.3 (7.3)
I've tried synchronizing my iTunes with the Quicktime movie to a new iPod and that doesn't work either. I've tried many different approaches but none of these ever work. I'd really appreciate any thoughts or ideas you might have. Thank you!

You probably will need a 3rd party application to convert the . mov QT file that iPhoto creates into a format for the iPod. Some are VisualHub, ViddyUp, and iSquint. You can find them at VersionTracker.com.
Happy Holidays
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Exporting HD Sizes for Quicktime and AVI?

Okay, LOVE the new CS4, but have a problem.
For tech notes in case it means anything, I'm shooting with a JVC HD-110, editing M2T files. Everything in THAT respect works perfectly - NOW I even have an FS5 drive so it goes even better - dropping all capture time and processes. The Projects are all set up as HDV, 720p at 24p - basically, everything about the Project is set to HD.
When I choose Quicktime or AVI as the Export format, the only Preset options that come up are DV related. Meaning, SD... And when I have to manually type 1280x720 as the export size (upping the default from 720x480) it even reads "1,280" - not a straight "1280", get it?
The resulting render looks horrible - completely unusable - unless my goal is to simulate the old Fisher Pricer Pixel Camcorder ;-)
How do I Export from Premiere's Timeline to an HD format? Or can I download a set or HD Presets to put in the Export Settings (or something) folder for each codec?
Thank you for your time, and any thoughts-
-Lew

Oh yeah - there's a whole huge list for WMV! MAN you have options there!
No, none of those options are (or seem) available for Quicktime and AVI.
I bounce files back and forth for clients (and myself) for FX work and edits (they prefer the Quicktime Animation codec at 100% - gotta admit, it's beautiful!), and would like to do final output to HD in the end for a project I'm working on right now.
-Lew

Cannot read version 4 fcp project and associated files with the new 5.1.2

I cannot read my fcp 4 version projects and associated files with the new 5.1.2 fcp.
Please help!

I bought the Final Cut 5 studio to use for my company but I have project files from version 4, which I would like to update. My G5 is running Tiger and Final Cut recognizes the old files as Final Cut Documents (the media is already on the G5) but will not open them or their associated quicktime files. I have no problem loading version4 to export the Masters but I would like to be able to upgrade the project files so that I can use them in my addition Studio Pro applications and touch them up in Shake. Also, I don't want to go and find FCP4 on the internet because it may have other problems.
What do you suggest?
Can FCP4 files be updated to version 5.1.2?
Can I get a back dated version of FCP4 through Apple?
Thanks for your time.

Convert pdf files into wiki pages, and export wiki pages as word and pdf files

I am working on an enterprise wiki site collection inside my SharePoint server 2013. And there was a requirement to automatically generate wiki pages from word documents. As I read that the built-in service within SharePoint does not support importing the
pictures within the word documents. So I looked into 3rd party tools and I settle on the “Kaboodle Word to Wiki” link
which will manage to convert word docs into wiki pages, with only minor layout problems.
But I want to know if there are additional tools which support the following:-
Converting pdf files to SharePoint wiki pages.
Exporting SharePoint wiki pages into pdf and word documents?
Regards

I haven't seen any third party tool converting pdf files to SharePoint wiki pages and and exporting SharePoint wiki pages into pdf and word files.
You need to write custom feature where you can use iTextSharp pdf for pdf conversion. you can also check below blog which shows the export of SharePoint Wiki to Word/PDF without 3rd party tools:
http://blogs.msdn.com/b/thomsven/archive/2011/09/09/export-sharepoint-wiki-to-word-pdf-without-3rd-party-tools.aspx
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.
the link you posted is a manual process for converting wiki to pdf ,, i was looking for a tool which allow converting wiki to pdf ?

'Create Settlement Batches' Request and Output file name

Hello,
Is there a table/view which keeps 'Create Settlement Batches' request id and name of the output file of that request ?
Output file is created in 4456_1.out format. I can see this file name in IBY.IBY_BATCHES_ALL table BATCHID column and
IBY.IBY_TRXN_SUMMARIES_ALL table BATCHID column. Non of the tables do not contain the concurrent request id.
How can we find out from tables/views the name of the output file, if you know the request id ?
Thank You,
sruwan

Hi Hussein,
I already looked at FND_CONCURRENT_REQUESTS. It doesn't contain the output batch file name. It has a column called 'OUTFILE_NAME' and it points to
a file called concurrent_request_id.out file ( Eg: 123456789.out ). This file is blank when you run 'Create Settlement Batches' request.
'Create Settlement Batches' request also crates an output batch file in the format 1234_1.out. Problem is finding a pace linking that file name to concurrent request id.
Thanks for your reply,
sruwan

Fcp x and motn files

For some reason, I cannot import motn. files into FCP X. When I use the file>import>files. it does not read them. FCP 7 reads them just fine.
Any ideas?
Sandra V.

Good idea. Once they are imported to either FCP 7 or FCP 10, they are not editable anyway, so what's the difference. Thanks for that.
I am unable to import IMovie projects in editable form as well. That would be the file extension .rcproject.
Have you experienced this?
I was hoping to start my project in IMovie (using the trailers) and move to FCP X for a more sophishiticated look. No luck!

Quicktime and mono files...

Why can't QuickTime play mono files? From the Finder or as an open file.
And how do I go about getting QuickTime to play mono files? Perhaps some setting has been altered that I'm not aware of.

I previously posted a fix that didn't work out but if someone is still trying to figure this out I made a discovery today. My mail app would no longer play my voice mail wave files from inside the actual emails. When I played through the internal speaker i heard it fine but through my sound card nothing. I had noticed that the files were mono and if I opened them in quicktime and reassigned the mono channel to right or left I could hear it but I didn't know how to change the way quicktime would rout mono files by default. Today I had some time to kill so I experimented. I found that on my system with my sound card the solution was to go to the speaker configuration setting in the audio devices panel of the audio midi setup window. There I went to the multi channel setting and switched it from 5.1 surround to stereo. Perfect sound from my mono file now on both speakers for the first time. I had to close and restart my apps to be sure these settings had worked. A little more work showed that the mono sound was previously being routed to the center channel which was not connected on my system. It appears to have resolved my issue but why the importance of these setting was never mentioned by apple is beyond me. If this works for anyone else let me know.

Hyperion fdm it is creating lot of tmp and fmt files in inbox while import

When files are imported in FDM, it is creating a tmp and fmt files for each import. This consumes lot of space. Is there any way to get rid of tmp and fmt file after each import?
Thanks
ARB

These files are for the bulk insert operation. A .tmp and .fmt file is created to perform the bulk insert operation to insert the data into the data seg tables in the FDM application database. You can clear these out at anytime. A new pair will be created after each import and it does not affect the functionality to remove them.

HELP!EXPORTING FROM KEYNOTE TO QUICKTIME AND IT CREATES TWO DIFFERENT FILES

I made a presentation in keynote, adding music from my itunes library and need to send it to a client (who owns a PC) ASAP.
When I export my keynote file to QT, it creates two separate files on my computer. One is the project and one is the "soundtrack.mov"
1. Why does it create two separate files?
2. How can I send the ENTIRE presentation in one?
3. How can I send it to a PC user?
4. Why did it tell me on my last music selection that I added to keynote (After I exported) that I would have to open it in itunes???
Totally NEED HELP ASAP!
Thank you
ML

Yeah, me too. Bump. Can anybody explain this behavior?!?

FCP, Quicktime and Qmaster

I am trying to use Qmaster to distribute processing from Compressor. I only have one copy of FCP so I know I need to export the FCP file as a quicktime file, then submit that quicktime file through compressor to take advantage of Qmaster and distributed processing. What I need to know, is if the end result is going to be a DVD: Best Quality file from compressor. What settings do I need to use to export the quicktime file. Also am I going to loose all the time I would have made up from using Qmaster if I have to first export a quicktime movie.
Thanks,
John

What is a G5 WorkBook?
I know of PowerBook G3 and G4s. The ones that came after were the MacBook and MacBook Pro, both of which use Intel processors.
Anyway..., click once on a QuckTime movie and press command and i keys.
Scroll down to Open With. Click the button and choose QuickTime Player from the list.
Below that, you will see some text "Use this application to open all documents like this".
Click the "Change All" button.

I exported a project to QuickTime and the video quality is a bit shimmery, and grainy.

Did I do too much color correcting (too much saturation)? Or might it have something to do with the Broadcast filter? Or might it have something to do with what CODEC I used? I'm stumped.

What is the format/codec of the clips you are using? That would help us figure out what easy setup would best match.
Also, don't copy/paste the old sequence into the new sequence. Select all the clips in the old sequence and copy/paste them into the new sequence. (There is a difference.)
If you have 1280x720 clips, then it would appear you shot 720p video. The corresponding easy setup would be HDV Apple Intermediate Codec 720p30 (North America) or 720p25 (Europe).

Export creates a FCP quicktime and an AV1 and AV2 file. What?

Similar Messages

Maybe you are looking for