Export Cube to .EIF for Model View
I am using Analytical Workspace Manager 10g, version 10.2.0.3.0A and I have a very large AW. I would like to export one cube and its associated data for a specific month. I have attempted to limit the cube to the specific month and export the +..._STORED+ object using the Export ..._STORED to eif file 'xxx.eif' command however, when I import this eif file into a new AW it can only be viewed in Object View. When I try and change to Model View I recieve the error Unable to Attach to Analytic Workspace ...
I have also tried performing an export through the GUI by trying to export a specific dimension first. Since I do not want to export the entire AW I listed the specific objects I wish to export such as: ACCT, ACCT_HIERLIST, ACCT_HIERLIST_SURR, ACCT_LEVELLIST, ACCT_LEVELLIST_SURR. After importing this .EIF file I receive the same results as above, unable to switch to Model View with the error Unable to Attach to Analytic Workspace ...
How do I export a specific cube for a specific month in AWM to be viewed in Model View? I wish to create a separate AW for this cube for troubleshooting purposes.
Thanks,
Kristine
10g AWs contain many 'metadata objects', such as ALL_DIMENSIONS and DIM_ATTRIBUTES. If you don't include these objects in the EIF file then AWM will be unable to read the metadata. So in principle you could add all these metadata objects, with appropriate limits, to your export list and everything would work. In practice, however, you will inevitably miss some objects, take other objects you don't need, and include too many dimension members. For example you would export ALL_CUBES, which would then list cubes whose variables you didn't export.
So you could try something like this.
1) Generate the XML Template for the original AW and use it to recreate an empty copy of the AW in some other schema
2) Export the dimensions and variables you are interested from the original AW into an EIF file, 'one_month.eif' say
3) Import the EIF into the new AW. You should probably specify the DATA option to IMPORT so that you don't modify existing definitions.
CDA 'MY_DIR'
IMPORT ALL FROM EIF FILE 'one_month.eif' DATA
I don't know if it will work, but it seems worth trying. I hope someone else on the forum has done this before and has an easier solution.
Similar Messages
-
Best, export slideshow in iMovie, for online viewing
I tried exporting my 5min slideshow in iMovie using this setting:
go to>share
export using quicktime
export as: mpeg4 settings>
file format: mp4
video format: h.264
data rate: 1500 kbits/sec optimized: cd/dvd
image size: 1280x720
key frame: 12
frame rate: 12
video options>
restrict profile to: main
encoding mode: best
~
So far, this is good file size for online uploading, and good quality. Good enough. But there are still color issues, like some color blotching, and color transitioning, and the quality of the photos in the imovie when exported is not as good as when I view the slideshow in imovie. It's very important that the quality of the photos remain top quality as this for fine art photography promotion.
If you have any ideas how to export slideshows from imovie, in top quality, please reply. This is for online viewing, to be uploaded in free-hosted sites like youtube, facebook, multiply, etc. I am aware that youtube and facebook have HD options for video viewing. I need someone's help. Thanks.Yes, I did. Not so good. The settings I mentioned above is actually the best I've tried so far.
-
Exporting an hdv sequence for sd viewing
can anyone advise on how best to export an HDV sequence (using compressor and dvdsp) for standard definition viewing?
i would be interested in hearing suggestions for both (a) letterboxing and (b) cropping in on the sides. thank you.
dannyThough I'm woefully underqualified to step in for Jerry, what you're experiencing is one of those oddities about working in Native HDV - a standard definition DVDSP project will not accept it.
(And this qualifies as 'odd' because the same DVDSP project would accept the footage if it's Apple Intermediate Codec, a format that I suspect Jerry prefers and uses normally)
There is much debate about how to achieve the best quality conversion from HDV -> SD DVD without spending the 25+ hours that Compressor 2.x would take to do a proper format conversion. The most discussed of these workarounds is The Bonsai Solution™, so give that a shot and see how that works out for you. -
Hi,
I have created a model view and generated the partner profiles. when i am distibuting the model view, I am getting an error " Model View XXXX has not been updated" "Reason: Maintenance systems for model view XXXX are not identical".
could anybody tell me , how to resolve this issue.
Thanks & Regards,Any luck with the resolution to this error?
Thanks,
John -
Hello
I am setting up an ALE scenario to send idocs from system A to system B. I have a problem with the distribution model view. The model has been distributed to the receiving system with the wrong basic idoc type entered in the partner profile. I would like to know how I can change the model view and re-distribute it.
Thanks,
A.P.Hai
Go through the following Procedure
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards
Sreeni -
Distribution Model View - Error
Hi,
When we try to distribute the model view, we get an error 'Model View has not been distributed. Reason : Maintenance systems for model view D-HR-MD are not identical...Maintenance system in sending system D-OFS-HR.....Maintenance system in receiving system DH3-500' .
What is being referred to as the maintenance system here? Are we missing out on something?
Thanks in advance!
Regards,
Nejuma IqbalHi buddy,
we are also facing the same type of Error in BD64 while distributing the model view
Could you please help me to resolve this error
Regards -
Related to distribution the model view
hi
When we try to distribute the model view, we get an error 'Model View has not been updated. Reason : Maintenance systems for model view D-HR-MD are not identical...Maintenance system in sending system D-OFS-HR.....Maintenance system in receiving system DH3-500' .
What is being referred to as the maintenance system here? Are we missing out on something?Are you created distribution model for the correct Logical systems. Check it once.
-
Is model view(BD64) necessary for EDI
is model view created using BD64 necessary for a EDI transactions? I have created a logical system, a RFC destination and a EDI File Port.
After all this i am trying to push a material master data using BD10 to the file port. When i do that the system gives me a message saying that master idoc created but it does not create a communication idoc. Only if i have a Model view set up in BD64 it creates a communication idoc. So my question is do we need a model view for EDI configuration?
~SureshHi,
BD64 is required for master data distribution..
If you are having a interface that sends IDOCs to the customer or receive IDOCs from the vendor..You don't require BD64 setup..
Thanks,
Naren -
Tcode PFAL there is no model view for the distribution of HR Data.
Hi friends ,
i am facing new problem,i want to send iDOC to other system.
previeous its working fine.
but to day when i open tcode PFAL.
it give me Error:"There is no model view for the distribution of HR master data"
what is the solution for that.
i want to send HR Data.
its urgent please give me any solution ithat will help me alot.
thanks in advanceThere is already Distributed Model Created.
can u give me annother tcode so i can send Metarial data, by IDOC.
please help me.
Thanks -
Exporting PDF format for web viewing, fonts look bad
Hey everybody I'm relatively new to indesign so sorry if this is a simple one. I'm doing a newsletter in indesign, which will be used stricktly for web viewing. Whenever I export the file as a pdf the body text fonts look a bit off, as though they are slightly pixelated around the edges. This is not as noticable in the artcile titles with larger font, but any smaller font (i'm using size 14, and futura book) and it gets this pixelation, it is even more noticeable in the thinner type sets of the font. Another odd thing is the first page of the newsletter the fonts are more messed up looking than the following pages where the same font types and sizes are used, the only major difference is the first page has a photo on it, but the fonts that look weird are below the photo not overlaying it or anything like that. I turned off all the compression on the pdf export, also tried it will varying amounts of compression but still have the same issue. And I am viewing this in Mac's Preview program, not acrobat.
Ok, just checked through all the flattening preview highlights and everything looked fine in that. Since my exported document looked perfectly fine in acrobat, but sort of pixelated in mac's preview, is there any way around that?
If you are serving the PDF via a web address it will very likely be viewed in a browser (not downloaded and opened in an app like Preview or Reader). All of the browser displays have slightly different anti-aliasing, which you can see if you zoom in on a screen capture of the text. Here's a line of text from your PDF at 100%, magnified to 400% in Photoshop. From top to bottom Safari, Chrome, Firefox:
There's nothing you can do about the anti-aliasing quality of the different browsers and apps. The PDF you posted has live transparency, so it isn't a flattening issue. -
Microsoft BI Semantic Model for Power View is missing in data source
Microsoft BI Semantic Model for Power View is missing in data source type drop down when cretaing a rsds data source for powerview in sharepoint 2013
Hi Sanjay,
I resolved the issue.Follow the steps
1)Go to Central Admin->System Settings->Manage Farm Solutions (Under Farm Management)
2)Check if "powerpivotwebapplicationsolution.wsp" is there and is deployed for the webapplication under which you are creating report by verifying
Deployed to:,if not then deploy that for your web application.
Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem -
Best Export Options for QT5 Viewing
I run a site for Mac OS 7 users and want to upload some videos there in QuickTime 5 format (the latest version for Mac OS 7). I am working on a G4 running Tiger and QuickTime 7 Pro.
What are some of your opinions on the best export options for QT5 viewing, distrubed over the internet, at say 320x240?Alas, the data rate of these two video codecs must be a lot higher (at least 25% more than the more modern codecs) to ensure a good visual experience.
A neat html "trick" is to encode with these higher data rates but at a smaller dimension. Instead of 320X240 use 160X120. The smaller dimensions help keep the file size down. During html playback use the object and embed tag to scale="tofit" and enlarge the playback area.
Your src (source) tag dimensions are larger than the original source file. Using scale="tofit" tags the file plays at the designated size instead of the original (160X120) size.
The pages hosted for .Mac users (iWeb and Homepage) use the opposite tag (scale="aspect") that fit the source to the template of the page. One of mine as an example:
http://homepage.mac.com/kkirkster/zoom/ -
Is it possible to use markers in a Premiere Pro sequence such as Chapter / Comment / Segmentation and export the XMP metadata for a database so that when the video is used as a Video On-Demand resource, a viewer can do a keyword search and jump to a related point in the video?
take have to take turns
and you have to disable one and enable the other manually -
Iphoto slideshow exported for iweb viewed by windows
I have been trying to publish an iphoto slideshow that I had exported as a movie for weeks. My mac people can see it, my PC family members cannot! I tried to make it small for the web, changed the filename to mp4 from mpv4, but PC people still could not see it. So I tried to put the slideshow movie in as a huge .mpeg and it disappeared. ( I had made an avi file but it looked horrible so used the equally as large but better ,mpeg)
I am getting the idea that it can only be done with imovie! Is than an authoritative step by step on iphoto 08,quicktime pro, and Iweb so I can put all these things together?Don't use the Finder to change the file extension. Not only is it folly but it breaks the links used in your iWeb page code.
Don't use AVI. It is a dead container discontinued by its authors (Microsoft) years ago.
Don't use MPEG-1 (1991 format).
Default exports from iPhoto to QuickTime formats use the newer H.264 video codec which requires any machine (Mac or PC) have QuickTime version 7 installed. If they can't install version 7 they can't view your file. -
Export to powerpoint not working for certain views
Hi All,
I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
During testing, it is observed that export to powerpoint object is not working for the following views.
1. Condensed Org. Chart
2. Compressed OrgChart -Only works when we expand at least one position
3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
In all the other views the export to Powerpoint object are working fine.
Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
I have implemented Export Pack 3.0 for OrgChart.
J. ThomasHi Luke,
Thanks for the response.
Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
The following features are working fine.
1) Export to PDF
2) Export to JPEG
3) Export to Powerpoint Image.
Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
The error message that is flashed for the user is the usual one....pasted below.
Object Variable or With Blovk Variable Not Set.
Export To PowerPoint
Compatibility
We currently support:
Microsoft PowerPoint 2000 / 2002
Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
In the log file, the following error message is displayed.
ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
Warm regards,
J. Thomas
Maybe you are looking for
-
How can I check on the delivery of a photo book that I created and sent to a friend. I have the order number but I can't find the tracking information.
-
Windows 7 -How to authenticate to WiFi (home or public) with AnyConnect NAM installed
Hello, We are deploying ISE and connecting to the company's WiFi using a "machine" login (active directory laptop) works fine on Windows 7 or 8 - both wired and wireless. But, here is a scenario that I can't seem to find a good answer for. All my sea
-
Differing Volume Levels-- Can't Find Answers
I play my iPod and iTunes through my stereo at times. JVC 140 watt stereo. My volume control has a series of marks around it similar to a clock When I play a CD or vinyl record, the volume control for adequate sound is just a few notches above the "m
-
Can't find Photoshop CS5.5 to download
Hello, I bought Photoshop CS5.5 year ago. Now I can't find PS CS5.5 but only 5.1 or 6+... Any link? Thanks.
-
Centering flash movie top and bottom in dreamweaver?
Hi all, I'm a novice user of dreamweaver. I've placed a flash movie in dreamweaver and centered it left and right but how can I center it top and bottom so it floats?