Export current running configs from several devices

We are currently running LMS 4.0 and have been collecting running configs on several of our devices.  Is there a folder that retains the running configs or do I need to run a report and export from the report?  If a report what report do I run.  I have been digging into the interface and I am not finding a solution so any assistance would be great.

CSM event viewer supports events from the ASA/FWSM virtual contexts ony if each context is discovered in CSM configuration manager with separete mangement IP.
Please try to discover the contexts as independent devices with separate management IP.

Similar Messages

  • Copy startup or running config from 2811 rommon

    I have a 2811 that has a bad CF slot. I don't have a USB stick small enough (4GB is the smallest, unless it'll use it partitioned as a 2GB) to copy IOS to the 2811. Right now I'm trying to copy the IOS image via xmodem into DRAM and booting that way. TFTP kept failing.
    If this doesn't work, is there a way to copy the startup/running-config from rommon? Even if I can just view the config that would be fine. I thought I had the config copied off of it, but can't find it for the life of me.

    TFTP transfers fail, I've tried it a couple of times. I'm going to try xmodem again.
    I can get into priv mode, but meminfo will not give me the hex addresses needed to dump. I get the hex address of the start of the main memory,  nothing else.
    Edit: The xmodem download completed, but I get the same error as trying to boot from the CF card:
    Error : uncompressed image checksum is incorrect 0x5D7BD774                    
            Expected a checksum of 0x357BD795                                      
    *** System received a Software forced crash ***                                
    signal= 0x17, code= 0x9, context= 0x80014dc0                                   
    PC = 0x8000f0d4, Cause = 0x20, Status Reg = 0x3040a803

  • How to backup a "show tech" and a "running config" from MDS switches

    hi, guys
    I am a newbie of MDS switches.
    but I got a request this week asking me to actively backup a "show tech" and a "running config" from the MDS switches........
    so my questions are:
    1) if I want to back up MDS configurations, which commnds should I run? or just "show tech" is enough?
    2) is the MDS itself have the backup function? for example can ftp the configuration to someplace?
    please help point me the right direction or is there any official referece docs I can refer to ?
    thanks in advance!!!

    tftp worked for me but not ftp. My ftp requires a password and I don't know how to send it via scheduler job.
    Worked:
    scheduler job name BkupConfig
      copy running-config startup-config
      copy startup-config tftp://10.1.1.1/MDS_Bkup/DowMDS$(TIMESTAMP).txt
    scheduler schedule name Weekly_5am
      job name BkupConfig
      time weekly 01:05:00
    FAILED FTP:
    Job Name       : test                              Job Status: Success (0)
    Schedule Name  : test                              User Name : user
    Completion time: Thu Sep  5 11:08:41 2013
    --------------------------------- Job Output ---------------------------------
    `copy running-config startup-config`
    [###                                     ]   6%
    [######                                  ]  12%
    [########                                ]  19%
    [###########                             ]  25%
    [##############                          ]  32%
    [################                        ]  39%
    [###################                     ]  45%
    [######################                  ]  51%
    [########################                ]  59%
    [###########################             ]  65%
    [#############################           ]  71%
    [################################        ]  79%
    [###################################     ]  85%
    [#####################################   ]  91%
    [########################################]  98%
    [########################################] 100%
    Copy complete, now saving to disk (please wait)...
    `copy startup-config
    ftp://[email protected]/MDS_Bkup/DowMDS2013-09-05-10.53.05.txt
    `
    Password: Login failed.

  • How can I transfer my iTunes library from my laptop to an external drive connected to my time capsule? I want to be able to access the music from several devices by wifi and am a newbie to network stuff.

    I have a 1TB Time capsule, I would like to attach a USB drive to the Time Capsule and transfer my iTunes Library to it so I can run itunes from wifi. I am new to network stuff. My current iTunes library is on a USB drive velcro'd to the back of my Macbook - rather inconvenient, the USB port is loose. The music files are external but the library files with ratings/play counts are in the iTunes folder. Advice please? Be gentle and assume I know nothing please!
    Thanks
    scott

    Setting it up the way you have with the library on the internal and just the media on the external makes it a lot more tricky to move things around. If it was all on the external you could do in the time it takes to copy the files plus about 20 seconds.
    You can use the same library file, except in that file are references pointing to the media files on the USB drive.  Are you planning on doing this with the same USB drive that you are using right now>?  It is possible it may work.  If the configuration is that you have SongA on USB drive Fred, as long as the drive remains named Fred then you should be able to move it to a different point of attachment.  If you are planning on using a different USb drive you can try renaming the new USB drive to the exact same name as the existing one and maybe trick iTunes into not noticing the difference.
    This is where having as much detail as possible when posting an issue is helpful so we don't have to consider every possible configuration.

  • Missing events from several devices within event viewer

    Hi
    I'm running a CSM v4.1.0 which manages several FWSM blades and device contexts. Although all context share the same syslog policies within CSM the events off half of the contexts are not shown in the event viewer. I ran a sniffer on the server, so that I could verify that syslog messages from all contexts are arriving. But somehow the CSM ignores the syslog messages. All contexts are selectable within the "Custom Filter for Device" so the CSM should be aware off them. Well off course he should be aware, as he has all the configurations of the contexts. ;-)
    What am I missing? Is it a bug? Is there a limitation to the number off supperted eventing devices?
    Kind regards
    Roberto

    CSM event viewer supports events from the ASA/FWSM virtual contexts ony if each context is discovered in CSM configuration manager with separete mangement IP.
    Please try to discover the contexts as independent devices with separate management IP.

  • How can I use iCloud just as Dropbox e.g. (having access to saved files from several devices)?

    I want to have access to some PDF's and pictures for example on my iPad when i saved it to iCloud on my MacBook. Is that possible? How? (Sry for my bad English, I'm from Germany and didn't use iCloud before )

    iCloud does not offer a generic file storage facility.
    Try using an alternative service such as Dropbox, GoogleDrive, OneDrive, SugarSync, Box etc. which does offer this facility.

  • Export from capture devices problem !!

    Hi,
    I'm trying to export audio and video from capture devices (typically a mic. and a web cam), the capture process goes fine, I can even preview everything, but the problem comes when I try to export, I always get the "NoDataSinkException", and I don't know why ??
    Please, I need help urgently

    hmm..I ment that although the jmf pack is installed the program is not detecting any video devices, but when I run jmstudio the program detect video devices successfully.. so my question is..where is the problem?; when I copy the jmstudio sorce code to my ECLIPSE I run it but when I ask the program to seach for video devices the program can't detect any video devices!

  • Export TMG config from EMS Array to standalone?

    A similar question was raised in this thread, but was not answered. I have a test array that is managed by an EMS, and I
    am attempting to export that configuration into a production standalone array without an EMS.
    If I do a standard export / import, I get the error:
    "The value specified for the parameter Scope is not valid for standalone mode"
    If I attempt to use the script
    here, I receive the same error.
    I hoped the EESingleServerConversion tool would do the trick, but that apparently is only for ISA to TMG (gives error "Error: This tool supports files exported from the root node only.").
    I am fully patched to SP2.

    Hi,
    Thank you for the post.
    I did some research and test. It seems like we can migrate from standalone array to EMS.
     But we cannot directly export the entire config from EMS to standalone array.
    Regards,
    Nick Gu - MSFT

  • Cisco WLC 5500 ver.8 running config

    Does anybody have a complete "show-run" running config from a 5500 series controller, "sanitized" of course, they would care to post to share?
    I need to create some config examples and do not have a piece of hardware to work with.
    Thanks

    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.01.13 14:15:58 =~=~=~=~=~=~=~=~=~=~=~=
    config paging disable
    Press Enter to continue...
    System Information
    Manufacturer's Name.............................. Cisco Systems Inc.
    Product Name..................................... Cisco Controller
    Product Version.................................. 7.4.130.2
    Bootloader Version............................... 1.0.20
    Field Recovery Image Version..................... 7.6.101.1
    Firmware Version................................. PIC 16.0
    Build Type....................................... DATA + WPS
    System Name...................................... Viten_2504
    System Location..................................
    System Contact...................................
    System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
    IP Address....................................... 192.168.162.20
    Last Reset....................................... Software reset
    System Up Time................................... 1 days 2 hrs 23 mins 10 secs
    System Timezone Location.........................
    System Stats Realtime Interval................... 5
    System Stats Normal Interval..................... 180
    Configured Country............................... US  - United States
    Operating Environment............................ Commercial (0 to 40 C)
    Internal Temp Alarm Limits....................... 0 to 65 C
    Internal Temperature............................. +27 C
    External Temperature............................. +30 C
    Fan Status....................................... 4100 rpm
    State of 802.11b Network......................... Enabled
    State of 802.11a Network......................... Enabled
    Number of WLANs.................................. 2
    Number of Active Clients......................... 0
    Memory Current Usage............................. Unknown
    Memory Average Usage............................. Unknown
    CPU Current Usage................................ Unknown
    CPU Average Usage................................ Unknown
    Burned-in MAC Address............................ 50:06:04:CB:76:C0
    Maximum number of APs supported.................. 25
    AP Bundle Information
    Primary AP Image    Size
    ap1g2            9588
    ap3g1            11308
    ap3g2            11216
    ap801            7172
    ap802            8588
    c1130            5072
    c1140            9428
    c1250            6964
    c1520            8072
    c602i            3744
    Secondary AP Image    Size
    ap1g2            9576
    ap3g1            11296
    ap3g2            11208
    ap801            7164
    ap802            8576
    c1130            5072
    c1140            9428
    c1250            6964
    c1520            8064
    c602i            3736
    Switch Configuration
    802.3x Flow Control Mode......................... Disable
    FIPS prerequisite features....................... Disabled
    secret obfuscation............................... Enabled
    Strong Password Check Features:
         case-check ...........Enabled
         consecutive-check ....Enabled
         default-check .......Enabled
         username-check ......Enabled
    Network Information
    RF-Network Name............................. wnbu
    Web Mode.................................... Disable
    Secure Web Mode............................. Enable
    Secure Web Mode Cipher-Option High.......... Disable
    Secure Web Mode Cipher-Option SSLv2......... Disable
    Secure Web Mode RC4 Cipher Preference....... Disable
    Secure Web Mode SSL Protocol................ Disable
    OCSP........................................ Disabled
    OCSP responder URL..........................
    Secure Shell (ssh).......................... Enable
    Telnet...................................... Disable
    Ethernet Multicast Forwarding............... Disable
    Ethernet Broadcast Forwarding............... Disable
    AP Multicast/Broadcast Mode................. Multicast   Address : 0.0.0.0
    IGMP snooping............................... Enabled
    IGMP timeout................................ 60 seconds
    IGMP Query Interval......................... 20 seconds
    MLD snooping................................ Disabled
    MLD timeout................................. 60 seconds
    MLD query interval.......................... 20 seconds
    User Idle Timeout........................... 300 seconds
    ARP Idle Timeout............................ 300 seconds
    Cisco AP Default Master..................... Disable
    AP Join Priority............................ Disable
    Mgmt Via Wireless Interface................. Disable
    Mgmt Via Dynamic Interface.................. Disable
    Bridge MAC filter Config.................... Enable
    Bridge Security Mode........................ EAP
    Mesh Full Sector DFS........................ Enable
    AP Fallback ................................ Enable
    Web Auth CMCC Support ...................... Disabled
    Web Auth Redirect Ports .................... 80
    Web Auth Proxy Redirect  ................... Disable
    Web Auth Captive-Bypass   .................. Disable
    Web Auth Secure Web  ....................... Enable
    Fast SSID Change ........................... Enabled
    AP Discovery - NAT IP Only ................. Enabled
    IP/MAC Addr Binding Check .................. Enabled
    CCX-lite status ............................ Disable
    oeap-600 dual-rlan-ports ................... Disable
    oeap-600 local-network ..................... Enable
    mDNS snooping............................... Disabled
    mDNS Query Interval......................... 15 minutes
    Port Summary
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE  
    1  Normal  Forw Enable  Auto       1000 Full  Up     Enable  N/A     
    2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     
    3  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     
    4  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     
    AP Summary
    Number of APs.................................... 3
    Global AP User Name.............................. admin
    Global AP Dot1x User Name........................ Not Configured
    AP Name             Slots  AP Model              Ethernet MAC       Location          Port  Country  Priority
    Viten_1142_2         2     AIR-LAP1142N-A-K9     00:22:bd:19:d5:80  default location  LAG      US       1
    Viten_1142_1         2     AIR-LAP1142N-A-K9     00:22:90:90:df:6c  default location  LAG      US       1
    Viten_2602_2         2     AIR-CAP2602I-A-K9     c0:67:af:58:e0:db  default location  LAG      US       1
    AP Tcp-Mss-Adjust Info
    AP Name              TCP State  MSS Size
    Viten_1142_2         disabled   -
    Viten_1142_1         disabled   -
    Viten_2602_2         disabled   -
    AP Location
    Total Number of AP Groups........................ 0    
    Site Name........................................ default-group
    Site Description................................. <none>
    NAS-identifier................................... Viten_2504
    AP Operating Class............................... Not-configured
    RF Profile
    2.4 GHz band..................................... <none>
    5 GHz band....................................... <none>
    WLAN ID          Interface          Network Admission Control          Radio Policy
     1               management           Disabled                          None
     4               management           Disabled                          None
    AP Name             Slots  AP Model             Ethernet MAC       Location          Port  Country  Priority
    Viten_1142_2         2     AIR-LAP1142N-A-K9    00:22:bd:19:d5:80  default location  LAG   US       1
    Viten_1142_1         2     AIR-LAP1142N-A-K9    00:22:90:90:df:6c  default location  LAG   US       1
    Viten_2602_2         2     AIR-CAP2602I-A-K9    c0:67:af:58:e0:db  default location  LAG   US       1
    RF Profile
    Number of RF Profiles............................ 7
    Out Of Box State................................. Disabled
    RF Profile Name                    Band     Description                         11n-client-only
    High-Client-Density-(802.11a)  5 GHz    <none>                      disable No     
    High-Client-Density-(802.11bg)  2.4 GHz  <none>                      disable No     
    Low-Client-Density-(802.11a)  5 GHz    <none>                      disable No     
    Low-Client-Density-(802.11bg)  2.4 GHz  <none>                      disable No     
    Typical-Client-Density(802.11bg)  2.4 GHz  <none>                      disable No     
    Typical-Client-Density-(802.11a)  5 GHz    <none>                      disable No     
    test                       5 GHz    <none>                      disable No     
    RF Profile name................................ High-Client-Density-(802.11a)
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 5 GHz
    Transmit Power Threshold v1...................... -65 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... 7 dBm
    Max Transmit Power............................... 30 dBm
    802.11a Operational Rates
        802.11a 6M Rate.............................. Mandatory
        802.11a 9M Rate.............................. Supported
        802.11a 12M Rate............................. Mandatory
        802.11a 18M Rate............................. Supported
        802.11a 24M Rate............................. Mandatory
        802.11a 36M Rate............................. Supported
        802.11a 48M Rate............................. Supported
        802.11a 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. -78 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -80 dBm
    Coverage Voice................................... -80 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    RF Profile name................................ High-Client-Density-(802.11bg)
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 2.4 GHz
    Transmit Power Threshold v1...................... -70 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... 7 dBm
    Max Transmit Power............................... 30 dBm
    802.11b/g Operational Rates
        802.11b/g 1M Rate............................ Disabled
        802.11b/g 2M Rate............................ Disabled
        802.11b/g 5.5M Rate.......................... Disabled
        802.11b/g 11M Rate........................... Disabled
        802.11g 6M Rate.............................. Disabled
        802.11g 9M Rate.............................. Supported
        802.11g 12M Rate............................. Mandatory
        802.11g 18M Rate............................. Supported
        802.11g 24M Rate............................. Supported
        802.11g 36M Rate............................. Supported
        802.11g 48M Rate............................. Supported
        802.11g 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. -82 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -80 dBm
    Coverage Voice................................... -80 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    RF Profile name................................ Low-Client-Density-(802.11a)
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 5 GHz
    Transmit Power Threshold v1...................... -60 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... -10 dBm
    Max Transmit Power............................... 30 dBm
    802.11a Operational Rates
        802.11a 6M Rate.............................. Mandatory
        802.11a 9M Rate.............................. Supported
        802.11a 12M Rate............................. Mandatory
        802.11a 18M Rate............................. Supported
        802.11a 24M Rate............................. Mandatory
        802.11a 36M Rate............................. Supported
        802.11a 48M Rate............................. Supported
        802.11a 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. -80 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -90 dBm
    Coverage Voice................................... -90 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    RF Profile name................................ Low-Client-Density-(802.11bg)
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 2.4 GHz
    Transmit Power Threshold v1...................... -65 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... -10 dBm
    Max Transmit Power............................... 30 dBm
    802.11b/g Operational Rates
        802.11b/g 1M Rate............................ Mandatory
        802.11b/g 2M Rate............................ Mandatory
        802.11b/g 5.5M Rate.......................... Mandatory
        802.11b/g 11M Rate........................... Mandatory
        802.11g 6M Rate.............................. Supported
        802.11g 9M Rate.............................. Supported
        802.11g 12M Rate............................. Supported
        802.11g 18M Rate............................. Supported
        802.11g 24M Rate............................. Supported
        802.11g 36M Rate............................. Supported
        802.11g 48M Rate............................. Supported
        802.11g 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. -85 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -90 dBm
    Coverage Voice................................... -90 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    RF Profile name................................ Typical-Client-Density(802.11bg)
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 2.4 GHz
    Transmit Power Threshold v1...................... -70 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... -10 dBm
    Max Transmit Power............................... 30 dBm
    802.11b/g Operational Rates
        802.11b/g 1M Rate............................ Disabled
        802.11b/g 2M Rate............................ Disabled
        802.11b/g 5.5M Rate.......................... Disabled
        802.11b/g 11M Rate........................... Disabled
        802.11g 6M Rate.............................. Disabled
        802.11g 9M Rate.............................. Supported
        802.11g 12M Rate............................. Mandatory
        802.11g 18M Rate............................. Supported
        802.11g 24M Rate............................. Supported
        802.11g 36M Rate............................. Supported
        802.11g 48M Rate............................. Supported
        802.11g 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. 0 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -80 dBm
    Coverage Voice................................... -80 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    RF Profile name................................ Typical-Client-Density-(802.11a)
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 5 GHz
    Transmit Power Threshold v1...................... -70 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... -10 dBm
    Max Transmit Power............................... 30 dBm
    802.11a Operational Rates
        802.11a 6M Rate.............................. Mandatory
        802.11a 9M Rate.............................. Supported
        802.11a 12M Rate............................. Mandatory
        802.11a 18M Rate............................. Supported
        802.11a 24M Rate............................. Mandatory
        802.11a 36M Rate............................. Supported
        802.11a 48M Rate............................. Supported
        802.11a 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. 0 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -80 dBm
    Coverage Voice................................... -80 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    RF Profile name................................ test
    Description...................................... <none>
    11n-client-only.................................. disabled
    Radio policy..................................... 5 GHz
    Transmit Power Threshold v1...................... -70 dBm
    Transmit Power Threshold v2...................... -67 dBm
    Min Transmit Power............................... -10 dBm
    Max Transmit Power............................... 30 dBm
    802.11a Operational Rates
        802.11a 6M Rate.............................. Mandatory
        802.11a 9M Rate.............................. Supported
        802.11a 12M Rate............................. Mandatory
        802.11a 18M Rate............................. Supported
        802.11a 24M Rate............................. Mandatory
        802.11a 36M Rate............................. Supported
        802.11a 48M Rate............................. Supported
        802.11a 54M Rate............................. Supported
    Max Clients...................................... 200
    WLAN ID      maxClients
    Client Trap Threshold............................ 50
    Multicast Data Rate.............................. 0
    Rx Sop Threshold................................. 0 dBm
    Cca Threshold.................................... 0 dBm
    Slot Admin State:................................ Enabled
    Band Select Probe Response....................... Disabled
    Band Select Cycle Count.......................... 2 cycles
    Band Select Cycle Threshold...................... 200 milliseconds
    Band Select Expire Suppression................... 20 seconds
    Band Select Expire Dual Band..................... 60 seconds
    Band Select Client Rssi.......................... -80 dBm
    Load Balancing Denial............................ 3 count
    Load Balancing Window............................ 5 clients
    Coverage Data.................................... -80 dBm
    Coverage Voice................................... -80 dBm
    Coverage Exception............................... 3 clients
    Coverage Level................................... 25 %
    802.11n MCS Rates
        MCS-00 Rate.................................. enabled
        MCS-01 Rate.................................. enabled
        MCS-02 Rate.................................. enabled
        MCS-03 Rate.................................. enabled
        MCS-04 Rate.................................. enabled
        MCS-05 Rate.................................. enabled
        MCS-06 Rate.................................. enabled
        MCS-07 Rate.................................. enabled
        MCS-08 Rate.................................. enabled
        MCS-09 Rate.................................. enabled
        MCS-10 Rate.................................. enabled
        MCS-11 Rate.................................. enabled
        MCS-12 Rate.................................. enabled
        MCS-13 Rate.................................. enabled
        MCS-14 Rate.................................. enabled
        MCS-15 Rate.................................. enabled
        MCS-16 Rate.................................. enabled
        MCS-17 Rate.................................. enabled
        MCS-18 Rate.................................. enabled
        MCS-19 Rate.................................. enabled
        MCS-20 Rate.................................. enabled
        MCS-21 Rate.................................. enabled
        MCS-22 Rate.................................. enabled
        MCS-23 Rate.................................. enabled
    AP Config
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... Viten_1142_2
    Country code..................................... US  - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US  - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 13
    MAC Address...................................... 00:22:bd:19:d5:80
    IP Address Configuration......................... DHCP
    IP Address....................................... 192.168.162.110
    IP NetMask....................................... 255.255.255.0
    Gateway IP Addr.................................. 192.168.162.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Enabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ default location
    Cisco AP Floor Label............................. 0
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch Name........................ Viten_2504
    Primary Cisco Switch IP Address.................. 192.168.162.20
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... FlexConnect
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... system
    S/W  Version .................................... 7.4.130.2
    Boot  Version ................................... 12.4.18.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    Stats Collection Mode ........................... normal
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1142N-A-K9   
    AP Image......................................... C1140-K9W8-M
    IOS Version...................................... 15.2(20150109:075323)$
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1332SBYY
    AP Certificate Type.............................. Manufacture Installed
    FlexConnect Vlan mode :.......................... Disabled
    FlexConnect Group................................ Not a member of any group
    Group VLAN ACL Mappings
    FlexConnect Local-Split ACLs :
    WLAN ID   PROFILE NAME                       ACL                                 TYPE
     Flexconnect Central-Dhcp Values :
    WLAN ID   PROFILE NAME                         Central-Dhcp      DNS Override      Nat-Pat     Type
      4       test123                                  False             False          False      Wlan
    FlexConnect Backup Auth Radius Servers :
     Primary Radius Server........................... Disabled
     Secondary Radius Server......................... Disabled
    AP User Mode..................................... CUSTOMIZED
    AP User Name..................................... admin
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 10.6.0.25
    AP Up Time....................................... 1 days, 02 h 13 m 41 s
    AP LWAPP Up Time................................. 1 days, 02 h 12 m 25 s
    Join Date and Time............................... Mon Jan 12 12:55:07 2015
    Join Taken Time.................................. 0 days, 00 h 01 m 15 s
    Attributes for Slot  0
        Radio Type................................... RADIO_TYPE_80211n-2.4
        Administrative State ........................ ADMIN_DISABLED
        Operation State ............................. DOWN
        Operation State Down Cause................... Radio is exiting inline CDP low power mode holddown.
        Operation State Down Code.................... RADIO_RC_EXIT_LOW_PWR
        Radio Role .................................. ACCESS
        Radio Mode .................................. Remote
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 1
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:23:eb:dc:c6:90
          Operation Rate Set
            1000 Kilo Bits........................... MANDATORY
            2000 Kilo Bits........................... MANDATORY
            5500 Kilo Bits........................... MANDATORY
            11000 Kilo Bits.......................... MANDATORY
            6000 Kilo Bits........................... SUPPORTED
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... SUPPORTED
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... SUPPORTED
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          MCS Set
            MCS 0.................................... SUPPORTED
            MCS 1.................................... SUPPORTED
            MCS 2.................................... SUPPORTED
            MCS 3.................................... SUPPORTED
            MCS 4.................................... SUPPORTED
            MCS 5.................................... SUPPORTED
            MCS 6.................................... SUPPORTED
            MCS 7.................................... SUPPORTED
            MCS 8.................................... SUPPORTED
            MCS 9.................................... SUPPORTED
            MCS 10................................... SUPPORTED
            MCS 11................................... SUPPORTED
            MCS 12................................... SUPPORTED
            MCS 13................................... SUPPORTED
            MCS 14................................... SUPPORTED
            MCS 15................................... SUPPORTED
            MCS 16................................... DISABLED
            MCS 17................................... DISABLED
            MCS 18................................... DISABLED
            MCS 19................................... DISABLED
            MCS 20................................... DISABLED
            MCS 21................................... DISABLED
            MCS 22................................... DISABLED
            MCS 23................................... DISABLED
          Beacon Period ............................. 100
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 1
          Number Of Channels ........................ 11
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          Fragmentation Threshold ................... 2346
          Packet Retry Limit ........................ 64
        Tx Power
          Num Of Supported Power Levels ............. 8
          Tx Power Level 1 .......................... 20 dBm
          Tx Power Level 2 .......................... 17 dBm
          Tx Power Level 3 .......................... 14 dBm
          Tx Power Level 4 .......................... 11 dBm
          Tx Power Level 5 .......................... 8 dBm
          Tx Power Level 6 .......................... 5 dBm
          Tx Power Level 7 .......................... 2 dBm
          Tx Power Level 8 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 6
          Tx Power Assigned By ...................... DTPC
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 11
          Channel Assigned By ....................... DCA
          Extension Channel ......................... NONE
          Channel Width.............................. 20 Mhz
          Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
          TI Threshold .............................. -50
          Legacy Tx Beamforming Configuration ....... AUTOMATIC
          Legacy Tx Beamforming ..................... DISABLED
          Antenna Type............................... INTERNAL_ANTENNA
          Internal Antenna Gain (in .5 dBi units).... 8
          Diversity.................................. DIVERSITY_ENABLED
          802.11n Antennas
             A....................................... ENABLED
             B....................................... ENABLED
             C....................................... ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 12 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
        CleanAir Management Information
            CleanAir Capable......................... No
    Cisco AP Identifier.............................. 3
    Cisco AP Name.................................... Viten_1142_2
    Country code..................................... US  - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US  - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 13
    MAC Address...................................... 00:22:bd:19:d5:80
    IP Address Configuration......................... DHCP
    IP Address....................................... 192.168.162.110
    IP NetMask....................................... 255.255.255.0
    Gateway IP Addr.................................. 192.168.162.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Enabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ default location
    Cisco AP Floor Label............................. 0
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch Name........................ Viten_2504
    Primary Cisco Switch IP Address.................. 192.168.162.20
    Secondary Cisco Switch Name......................
    Secondary Cisco Switch IP Address................ Not Configured
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_ENABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... FlexConnect
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... system
    S/W  Version .................................... 7.4.130.2
    Boot  Version ................................... 12.4.18.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    Stats Collection Mode ........................... normal
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1142N-A-K9   
    AP Image......................................... C1140-K9W8-M
    IOS Version...................................... 15.2(20150109:075323)$
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1332SBYY
    AP Certificate Type.............................. Manufacture Installed
    FlexConnect Vlan mode :.......................... Disabled
    FlexConnect Group................................ Not a member of any group
    Group VLAN ACL Mappings
    FlexConnect Local-Split ACLs :
    WLAN ID   PROFILE NAME                       ACL                                 TYPE
     Flexconnect Central-Dhcp Values :
    WLAN ID   PROFILE NAME                         Central-Dhcp      DNS Override      Nat-Pat     Type
      4       test123                                  False             False          False      Wlan
    FlexConnect Backup Auth Radius Servers :
     Primary Radius Server........................... Disabled
     Secondary Radius Server......................... Disabled
    AP User Mode..................................... CUSTOMIZED
    AP User Name..................................... admin
    AP Dot1x User Mode............................... Not Configured
    AP Dot1x User Name............................... Not Configured
    Cisco AP system logging host..................... 10.6.0.25
    AP Up Time....................................... 1 days, 02 h 13 m 41 s
    AP LWAPP Up Time................................. 1 days, 02 h 12 m 25 s
    Join Date and Time............................... Mon Jan 12 12:55:07 2015
    Join Taken Time.................................. 0 days, 00 h 01 m 15 s
    Attributes for Slot  1
        Radio Type................................... RADIO_TYPE_80211n-5
        Radio Subband................................ RADIO_SUBBAND_ALL
        Administrative State ........................ ADMIN_ENABLED
        Operation State ............................. UP
        Radio Role .................................. ACCESS
        Radio Mode .................................. Remote
        CellId ...................................... 0
        Station Configuration
          Configuration ............................. AUTOMATIC
          Number Of WLANs ........................... 1
          Medium Occupancy Limit .................... 100
          CFP Period ................................ 4
          CFP MaxDuration ........................... 60
          BSSID ..................................... 00:23:eb:dc:c6:90
          Operation Rate Set
            6000 Kilo Bits........................... MANDATORY
            9000 Kilo Bits........................... SUPPORTED
            12000 Kilo Bits.......................... MANDATORY
            18000 Kilo Bits.......................... SUPPORTED
            24000 Kilo Bits.......................... MANDATORY
            36000 Kilo Bits.......................... SUPPORTED
            48000 Kilo Bits.......................... SUPPORTED
            54000 Kilo Bits.......................... SUPPORTED
          MCS Set
            MCS 0.................................... SUPPORTED
            MCS 1.................................... SUPPORTED
            MCS 2.................................... SUPPORTED
            MCS 3.................................... SUPPORTED
            MCS 4.................................... SUPPORTED
            MCS 5.................................... SUPPORTED
            MCS 6.................................... SUPPORTED
            MCS 7.................................... SUPPORTED
            MCS 8.................................... SUPPORTED
            MCS 9.................................... SUPPORTED
            MCS 10................................... SUPPORTED
            MCS 11................................... SUPPORTED
            MCS 12................................... SUPPORTED
            MCS 13................................... SUPPORTED
            MCS 14................................... SUPPORTED
            MCS 15................................... SUPPORTED
            MCS 16................................... DISABLED
            MCS 17................................... DISABLED
            MCS 18................................... DISABLED
            MCS 19................................... DISABLED
            MCS 20................................... DISABLED
            MCS 21................................... DISABLED
            MCS 22................................... DISABLED
            MCS 23................................... DISABLED
          Beacon Period ............................. 100
          Fragmentation Threshold ................... 2346
          Multi Domain Capability Implemented ....... TRUE
          Multi Domain Capability Enabled ........... TRUE
          Country String ............................ US
        Multi Domain Capability
          Configuration ............................. AUTOMATIC
          First Chan Num ............................ 36
          Number Of Channels ........................ 21
        MAC Operation Parameters
          Configuration ............................. AUTOMATIC
          Fragmentation Threshold ................... 2346
          Packet Retry Limit ........................ 64
        Tx Power
          Num Of Supported Power Levels ............. 6
          Tx Power Level 1 .......................... 14 dBm
          Tx Power Level 2 .......................... 11 dBm
          Tx Power Level 3 .......................... 8 dBm
          Tx Power Level 4 .......................... 5 dBm
          Tx Power Level 5 .......................... 2 dBm
          Tx Power Level 6 .......................... -1 dBm
          Tx Power Configuration .................... AUTOMATIC
          Current Tx Power Level .................... 1
          Tx Power Assigned By ...................... DTPC
        Phy OFDM parameters
          Configuration ............................. AUTOMATIC
          Current Channel ........................... 48
          Channel Assigned By ....................... DCA
          Extension Channel ......................... NONE
          Channel Width.............................. 20 Mhz
          Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
            ......................................... 104,108,112,116,132,136,140,
            ......................................... 149,153,157,161,165
          TI Threshold .............................. -50
          Legacy Tx Beamforming Configuration ....... AUTOMATIC
          Legacy Tx Beamforming ..................... DISABLED
          Antenna Type............................... INTERNAL_ANTENNA
          Internal Antenna Gain (in .5 dBi units).... 8
          Diversity.................................. DIVERSITY_ENABLED
          802.11n Antennas
             A....................................... ENABLED
             B....................................... ENABLED
             C....................................... ENABLED
        Performance Profile Parameters
          Configuration ............................. AUTOMATIC
          Interference threshold..................... 10 %
          Noise threshold............................  -70 dBm
          RF utilization threshold................... 80 %
          Data-rate threshold........................ 1000000 bps
          Client threshold........................... 12 clients
          Coverage SNR threshold..................... 16 dB
          Coverage exception level................... 25 %
          Client minimum exception level............. 3 clients
        Rogue Containment Information
        Containment Count............................ 0
        CleanAir Management Information
            CleanAir Capable......................... No
    Cisco AP Identifier.............................. 4
    Cisco AP Name.................................... Viten_1142_1
    Country code..................................... US  - United States
    Regulatory Domain allowed by Country............. 802.11bg:-A     802.11a:-A
    AP Country code.................................. US  - United States
    AP Regulatory Domain............................. -A
    Switch Port Number .............................. 13
    MAC Address...................................... 00:22:90:90:df:6c
    IP Address Configuration......................... DHCP
    IP Address....................................... 192.168.162.117
    IP NetMask....................................... 255.255.255.0
    Gateway IP Addr.................................. 192.168.162.1
    NAT External IP Address.......................... None
    CAPWAP Path MTU.................................. 1485
    Telnet State..................................... Enabled
    Ssh State........................................ Disabled
    Cisco AP Location................................ default location
    Cisco AP Floor Label............................. 0
    Cisco AP Group Name.............................. default-group
    Primary Cisco Switch Name........................ Viten_2504
    Primary Cisco Switch IP Address.................. 192.168.162.20
    Secondary Cisco Switch Name...................... Viten_5508_1
    Secondary Cisco Switch IP Address................ 192.168.162.22
    Tertiary Cisco Switch Name.......................
    Tertiary Cisco Switch IP Address................. Not Configured
    Administrative State ............................ ADMIN_DISABLED
    Operation State ................................. REGISTERED
    Mirroring Mode .................................. Disabled
    AP Mode ......................................... FlexConnect
    Public Safety ................................... Disabled
    AP SubMode ...................................... Not Configured
    Remote AP Debug ................................. Disabled
    Logging trap severity level ..................... informational
    Logging syslog facility ......................... system
    S/W  Version .................................... 7.4.130.2
    Boot  Version ................................... 12.4.18.0
    Mini IOS Version ................................ 3.0.51.0
    Stats Reporting Period .......................... 180
    Stats Collection Mode ........................... normal
    LED State........................................ Enabled
    PoE Pre-Standard Switch.......................... Disabled
    PoE Power Injector MAC Addr...................... Disabled
    Power Type/Mode.................................. Power injector / Normal mode
    Number Of Slots.................................. 2
    AP Model......................................... AIR-LAP1142N-A-K9   
    AP Image......................................... C1140-K9W8-M
    IOS Version...................................... 15.2(20150109:075323)$
    Reset Button..................................... Enabled
    AP Serial Number................................. FTX1308S2H3
    AP Certificate Type.............................. Manufacture Installed
    FlexConnect Vlan mode :.......................... Disabled
    FlexConnect Group................................ Not a member of any group
    Group VLAN ACL Mappings
    FlexConnect Loc

  • FlexConfig - How to execute "TFTP" command to save running config via Flex

    Hi
    I want to save the running config from all our firewall via flexconfig.
    The problem is the carriage return after the command "copy running tftp://ip-address"
    I have to confirm the tftp server and the file manually
    I have no idea - how to do this via flexconfig -
    I found a flexconfig script to load a image to the asa called : ASA_copy_image
    Any Idea how to modify this script ?
    THX for help

    You can try Flexconfig with
    copy /noconfirm running tftp://ip-address
    I hope it helps.
    PK

  • LMS Prime 4.1 RICS0001:Internal Error,unable to process the collected data from the device.

    Hello,
    I have a problem with inventory collection from several devices getting
    "RICS0001:Internal Error,unable to process the collected data from the device."
    ERROR,[Thread-20],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,918,Device does not exist in RME, Please check if device is already deleted

    Did you schedule an inventory collection job?
    Delete schedule and recreate it using device group.
    Cheers,
    Michel

  • ITunes 10.7 Update returns error (-1003) & remains in App Store despite updating iTunes directly from iTunes webpage several times & currently running latest version 11.0.5 (5)

    I have experienced this problem since purchasing a brand new MacBook in October 2012, basically the App Store permanently displays "1 Update Available" for iTunes 10.7 but clicking the "Update" button only results in the following error "A server with the specified hostname could not be found.(-1003)" so I have always had to go around the App Store & download & install iTunes updates directly from the iTunes webpage.  I am currently running the latest version of iTunes 11.0.5 (5) & what I believe is the latest version of OS X 10.8.4 (12E55) & I simply wish to stop the App Store displaying this update that doesn't work anyway & relates to a year old version of iTunes!!! 
    Note: It may or may not be of importance but the same problem was also happening for iPhoto & iMovie but I was able to locate fixes for these issues which entailed changing a filename in both applications' "Contents" folders from "_MASReceipt" to "_MASReceipt_FAULTY" (although I believe I could have renamed it anything!)  I obviously tried a similar thing for iTunes & App Store separately but unlike iMovie & iPhoto which were fixed immediately the recommended changes were made, these modifications did not resolve the issue which persists to this day & isn't critical but is just annoying!!!

    Search for "iTunes" in Spotlight and make sure you don't have an outdated copy lying around, perhaps on a backup volume.

  • I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfull restarted my sy

    I have a MAC Pro from 2011 currently running MAC OS 10.9.5.  This weekend I cloned the MAC HD drive to a new SSD drive for improved performance.  The clone was completed successfully with no errors.  After the clone completed I successfully restarted my system using the SSD as the boot device.  I then successfully tested all of my products, including Photoshop CS6 and all of its plug-ins.  I successfully tested the key features that I frequently use.  Today while attempting to launch Photoshop CS6 a message is being displayed indicating that a scratch disk cannot be found.  All drives are available on the system via the Finder and Disk Utility.  I can access all drives including the old MAC HD which is no longer the boot device.  I've even attempted to launch Photoshop from the old device yet the same error persist.  Is there a way to review/edit/change Photoshop preferences if Photoshop doesn't launch?  I've even restarted my system several times to see if that would resolve the issues.  Does anyone have any recommendations for this issue?  Have you previously address this issue? 
    Thank you Gregg Williams

    Boilerplate text:
    Reset Preferences
    http://forums.adobe.com/thread/375776
    1) Close the program and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (not reversible)
    or
    2) Move the Folder. See:
    http://www.bugge.com/Family-and-friends/Illy/illy.html
    --OB

  • HT4914 My wife and I both have iPhones and iPads. Can we both have access to the same iTunes Match library or do we have to have separate subscriptions?  Our devices are synced to the same computer and we currently download titles from the same library.

    My wife and I both have iPhones and iPads. Can we both have access to the same iTunes Match library or do we have to have separate subscriptions?  Our devices are synced to the same computer and we currently download titles from the same library.  We both use separate apple id's on our devices.

    You need to reconfigure your phone for use with your Apple ID. I suggest you restore yours as new then reconfigure it with your information and Apple ID. Be sure to disable Find My Phone, if it's enabled, before proceeding.
    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    A
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    7. iOS - Unable to update or restore
    Forgotten Restrictions Passcode Help
                iPad,iPod,iPod Touch Recovery Mode
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
    Also, see iTunes- Restoring iOS software.

  • Blackberry 10 the data isn't compatible with the version of the device software that you are currently running

    Hi,
    my update to 10.3.1.1565 messed the handwriting input up on my phone.  so I tried to downgrade to 10.2.1, upon doing so all my files were wiped,  however I thought I was being smart by doing a complete backup this morning while running 10.3.1.1565 prior to attempting the os downgrade to 10.2.1 using BlackBerry Link, 
    Anyway I had to restore my device back to 10.3.1.1565 and now when I attempt to do a restore using the .bbb ( backup ) which I created earlier on today i.e getting the following error message:
    blackberry 10 the data isn't compatible with the version of the device software that you are currently running
    the software versions on my phone now and the software version when I did my backup are exactly the same 10.3.1.1565.  I'm able to restore my user files and apps ect, as it offers to do a partial restore,., but my contacts, and remember files are now gone.  I NEED THESE.  how do I get these back..
    please help..
    Thanks,
    GeoYeo - Free Local classifieds - Built for Blackberry 10, if you like it please Rate It and Share it!
    Solved!
    Go to Solution.

    Hi,
    I figured it out.  so I figured I would post.  Apparently BlackBerry pulled the 10.3.1.1565 update.  anway not sure what happened butI ended up usng Shenshi and grabbing an update from a different carrier, upon doing so I am now able to do a complete restore using my old BBB file, 
    GeoYeo - Free Local classifieds - Built for Blackberry 10, if you like it please Rate It and Share it!

Maybe you are looking for

  • Logical Standby - LGWR or ARCH mode

    After reading the [Setting the Data Protection Mode of a Data Guard Configuration|http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_transport.htm#i1183694] , I'm still confusing about it! What is the main difference between LGWR or A

  • How can I order a Blackberry in Portugal?

    How can I order a Blackberry in Portugal? Blackberry shop doesn't give me a option

  • Why can't I install adobe flash player in my phone?

    In the internet I want to watch TV channel so when I click the link but need adobe flash player but I can't install even not available in app store

  • Convert into Number

    Hi all, I have a value 000006009,70 in the source xml. I want to insert this into a database table column which has datatype "NUMBER". The values should be inserted as 6009.70 I have tried using conversion function "number". But it is not working and

  • IPhone stopped fetching Exchange subfolders, probably after 3.1.3 upgrade

    I have a hosted exchange account and configured three subfolders to be synched. I don't use pish but fetch every 15 minutes. Recently I noticed that synching foe these subfolders does not work anymore as I missed to reply to some pretty important ema