Export custom title for use on another computer

I created some custom lower thirds titles on my old computer using Motion 5 running Mountain Lion.
I want to be able to use these custom titles in FCPX on my new computer running Mavericks.
How do I do this?

Your custom titles should be in your Movies>Motion Templates folder on your old computer. Just copy that entire Templates folder to the Movies folder on your new computer. If your new computer already has a Motion Templates folder then just transfer the contents of the Templates folder on the old computer.

Similar Messages

Exporting Keynote 3 for use beyond my computer

I recently purchased the update to Keynote and was pleased with the ability to add sound to a whole elegantly animated slide show, images, text, etc.
If this is to be a useful working tool, I must be able to share it and have it playable as a standalone.
I tried all of the available methods to export what I created. None within the scope of iLife appear to be simple or elegant; QUICKTIME, did not function as desired and the sound was lost. iMovie didn't seem to do it.
iDVD offer some potential. However, the animation is clunky, the subtle moves are lost as is the sound track. I seem to be able to get sound for the iDVD intro to the slideshow/movie but not the show itself, text and images...
HELP!
Powerbook G4 Mac OS X (10.4.7)

sorry, I cannot help you, but I have similar problems. My presentation (with sound and animated objekts) works perfect in keynote. But as soon as exported to Quicktime nothing works anymore. The functions of most hyperlinks are lost, some are going to the sheet as desired, some are going anywhere else (just accidently), some don't react at all.
I want to say to Apple: the export of a keynote-presentation to QT is ****! I do hope, you will put this in order VERY SOON. If not, the export to Quicktime is for the trash and absolutely not worth to be qualified as "cinema-quality!!!
Oh, I forgot to mention: I work on Mac.

Export Ultra Beat Kit to use on another computer? Multiple samples per key?

I know I can save it in a session, but I'd like to export a custom UB kit, along with its samples, as a single file/folder for use on another computer. Is this possible?
Additionally, I'm sure this has been asked before but I never found an answer. Can I layer multiple samples on a single key and trigger them with different velocities? I can't even figure out how to do this in exs without it changing the volume according to velocity input. Thanks guys.

To answer the second question, it is certainly possible. Not that I have done it intentionally but on more than one occasion I have imported multiple samples into exs only to find that every sample plays when I press one key...
Check the mapping!
/j

Exporting the Browse Sequence XML file for Use in Another Project

When I generate a browse sequence based on the TOC using zero for the book level, instead of getting A, A1, A2, B, B1, B2, I get A, B, A1, A2, B1, B2. The TOC runs through all 1st level items first, cycles back through all 2nd level item, then 3rd level, etc.
My workaround was to auto-create the browse sequence at a 0 level and then manually manipulate it to output according to how my readers would actually read my online book (ie A Aa A1 A1a A1b A2 A2a A2b B B1 etc etc).
Now that I have my browse sequence in the correct order for this project, I do not want to repeat these steps every time I create a new version of my OLH for the same guide after some minor updates have been made to the FM source.
There is a file named whbrs.xml inside the output folder and it contains the browse sequence order I specified during my workaround steps.
Is it possible to export this file to another location for use in another project referencing the same guide?
This methodology is much preferred as I am working at an enterprise level with multiple documents (some numbering in the hundreds of pages) and do not want to have to manually use my workaround for each project I update over the next few years.

Hi Kristopher
You probably wouldn't want to use that particular file as it's an output file. You would likely have better luck using the ProjectName.BRS file as that one should be a source file.
However, keep in mind that whether (or how well) this will work will entirely depend on having the recipient project using the same identical structure and identical file names.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

IP address used by another computer

New to iMac. Keep getting msg that says IP address is being used by another computer. Have read Mr. Bob Timmons posts. His post are very helpful. So far, still haven't been able to solve on my own. I have an AT&T combo modem/router configured to operate as modem only. This is connected to AEBS. Old windows machine connected to one of the AEBS ports. Wireless devices are, ipad, iphone, itouch, apple TV, iMac, and printer.
Airport settings are; connect using ethernet; connection sharing off; using DHCP; wireless mode- create a wireless network; wireless security, WPA2 Personal; MAC address access control, not enabled
Any help is greatly appreciated!

Unfortunately, this information confirms that the 2-Wire device is not configured as a "bridge only" modem...which it needs to be.
If it were, you would not even be able to Connect Using = Ethernet on the AirPort Extreme.
Instead, your only way to connect would be to Connect Using = PPPoE on the AirPort Extreme.
But, your second post confirms that it is the 2-Wire device that is supplying the PPPoE service. This again confirms that it is not acting as a bridge mode modem.
Sorry, I don't have a 2-Wire gateway here to try to see if it can even be configured as a bridge modem, but having worked with a number of users on similar subjects in the past with 2-Wire products, I doubt that it can be configured this way....despite what the 2-Wire support folks might say. I think it is likely that the version of the 2-Wire that AT&T offers has limited functionality.
Your best option might be to configure the 2-Wire normally as a gateway device and then configure the AirPort to Connect Using = Ethernet and configure the setting for Connection Sharing to "Off (Bridge Mode)"
Or, perhaps you want to explore the possibilities on the 2-Wire further?

TC: The Internet connection is currently in use by another computer...

So, I have a TC connected to a Netopia ADSL modem from Earthlink. Ocassionally, when the computer has left the wireless network, I will come home to find the following page with the Earthlink logo at the top:
“The Internet connection is currently in use by another computer
( 172.16.1.10 ).
Enter your DSL Account logon password to switch the Internet
connection to this computer.”
If I enter the password and click "Obtain Connection", I am taken to another page that says that I can now access the Internet, blah blah blah... and another button that says "Release Connection".
First of all, it does not seem like that should be happnening, but no big deal as it takes 5 seconds out of my day to work around. The bigger problem is that only one computer can be connected to the Internet at a time. If a friend with another laptop comes over and tries to access the Internet at the same time as me, he will get the same Earthlink page popping up. If he enters the password, he will kick off the first computer and on and on and on...
I called Elink support and they, of course, told me it is a TC issue. I called Apple and they, of course, told me it is an ISP issue. I suspect that it has something to do with my TC settings (bridge mode, maybe?), but have no idea what I am doing there.
Anyone have any ideas for me? I have friends coming into town this weekend and we won't be able to share stupid YouTube clips as efficiently with only one computer!

There is nothing you can do.. if you want more than one device connected then you must double NAT. This is common practice with Satellite providers.. I am not sure why they cannot afford to buy a block of public IP.. maybe it is deliberate to prevent people using servers.
Just select ignore in the airport utility.. for the double NAT problem.. this is the equivalent to sticking your head in the ground and therefore your problems don't exist. (your opponents cannot see you if you have a bird brain!!) Of course when the opportunity comes up.. move. Go to fibre or 3g/4g with a reliable ISP who hands out public IP. Until then tighten your belt.. short commons are the order of the day.

How to organise Lightroom catalogue, in such a way that the catalogue can be used on another comput

how to organise(and save) Lightroom catalogue, in such a way that the catalogue can be used on another computer? / so you can see what has been edited etc. /

Yes, but external disks will always be slower than internal drives.
Look into file synchronization software. As long as folder structure is identical inside the two master folders, and drive letters the same, you can keep the two machines fully synchronized very easily, going both ways. The one I use cost about $50 or so.
Use a large capacity 2,5" portable (goes in your pocket) for transport. You need the entire master folder there, but once set up only new or modified files are copied.
The Lightroom catalog can be synchronized with the rest, so that you are working with the same catalog on both machines. This overwrites the catalog with a new copy every time, so a regular backup schedule in addition is a must. OTOH you will have three copies of every file, one always off-site. That's sound backup practice.
Tip: exclude the Lr Previews folder from the synchronization. They are written to disk in such a way that they take an insanely long time to copy. New previews will be built on the receiving machine.

The internet connection is currently in use by another computer

I am trying to replace my old linksys router with Airport Express. I can get it connected and and I can access the internet on my MacBook but when I try to use WiFi on my iPad, I get the message "The Internet connection is currently in use by another computer (172.16.1.11)" from Earthlink, my ISP.
I have a Netopia modem from Earthlink. My MacBookPro is running OSX 10.9.4.
I understand that I need to have the AirPort Express look like the only device attached to the Netopia modern, and then the AirPort Express will handle multiple devices' connections correctly (MacBook Pro, iPad, iPhone). I just can't figure out how to set this up.

There is nothing you can do.. if you want more than one device connected then you must double NAT. This is common practice with Satellite providers.. I am not sure why they cannot afford to buy a block of public IP.. maybe it is deliberate to prevent people using servers.
Just select ignore in the airport utility.. for the double NAT problem.. this is the equivalent to sticking your head in the ground and therefore your problems don't exist. (your opponents cannot see you if you have a bird brain!!) Of course when the opportunity comes up.. move. Go to fibre or 3g/4g with a reliable ISP who hands out public IP. Until then tighten your belt.. short commons are the order of the day.

Phonegap to export an App for iOS required mac computer... I have creative cloud cs 6 Dreamweaver...

phonegap to export an App for iOS required mac computer... I have creative cloud cs 6 Dreamweaver....windows...

I am having a very similar problem. I can export it from itunes to my desktop, but when i go to import the project through imovie on my Mac it says that it can not import movies that were created on an IOS app 1.4 or earlier, all though the app i used to create the project is the current. 2.0 is this the same problem you are having?

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Is my Droid Razr Maxx xt912 locked for use with another carrier's SIM - either in the U.S. or globally?

Is the Verizon Droid Razr Maxx XT912 locked to prevent using another carrier's SIM in the U.S.? Is it blocked to prevent use of another carrier's SIM outside the U.S.?
Thanks

Hi MattFlash, that is a great questions and I would be happy to help! The good news is that all of our 4G devices would be unlocked and ready for use with another carrier, so the Maxx is ready to go. If you would like to use another carriers service you may need their SIM card and would then need to follow their activation procedures. Hope this helps!
AdamG_VZW
Follow us on Twitter @VZWSupport

Exporting from FCP for use with PC

Hey all,
Trying to deliver a high-med quality 8 minute video from FCP for use with a PC. I've tried exporting both a .mov and .avi using DVCPro50, but neither are readable through the PC. Best I can get is sometimes audio will show up. Does anyone have a good solution for exporting from FCP for use with a PC?
Thanks again for your help!

I don't think DVCpro50 codec is available on a PC. I think panasonic has a special license with apple only, so you need to try a different codec for the avi.

Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn)

Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.

Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
If this is your "modem".......
http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
Does this device appear to be your "modem"?

Adobe-ID already been used on another computer

I own an eBookreader 'Kobo glo' and installed Adobe digital editions on my computer.
With this I am able to borrow e-books from our library.
My computer failed and got a new hard drive and I upgraded to Windows7.
Now my password is no longer accepted by Adobe digital editions ("has already been used on another computer").
What should I do? Response please to [email protected]

Odd, I have mine registered on a couple of computers and a couple of devices. I thought it started complaining after 6 total.
It might be worth completely unregistering (ctrl-shift-D) and restarting ADE to see if that helps; I don't think it will but it might.
You might need to ask Adobe to reset the activations on that account.
http://helpx.adobe.com/digital-editions/kb/digital-editions-requests-authorization-launch. html

Exporting IMovie to Flash Drive vie IDVD for Burning on Another Computer

I have made a slide show in IMovie and since my computer can't burn a DVD, I would now like to export the IMovie to IDVD and then onto a flash drive so that I am able to burn on another computer (probably a PC). Which is the best format to put the movie in for export via flash drive and how can I create the appropriate file after transfering the IMovie to IDVD. There didn't seem to be an export or share option for me on IDVD. If someone could help with the steps after sending the IMovie to IDVD. Thank you.

to finish editting it onto another computer*

Export custom title for use on another computer

Similar Messages

Maybe you are looking for