Export Data - Error: 1005000 Ascii Backup

I'm attempting to export data from a Dbase to a folder on my C: Drive, have tried both MAXL and EAS but am receiving following message "Error: 1005000 ASCII Backup: Failed to open [C:\PlanningUploads\ExportFile\ExportRes.txt]." Never done this before, so would appreciate advice. Many Tanks David

You should export to a folder on the Essbase server. You can then copy to a folder on your C drive if you wish.

Similar Messages

Essbase EAS export data error

Hello,
I am trying to Export data from Essbase Administration Services console (right click on the DataBase/Export), and i have this error: Export data <date> Failed
Error: 1042013 Network error [10038]: Cannot Receive Data.
I don't think it is really a network connection error... do you know another possible cause?
thanks!!

In reality, that message almost always means that the Essbase app has crashed. Take a look at the application log.
Evidently the Arbor development team decided that the obvious explanation for an application's failure to respond was network interruption, with the possibility of a crash too remote even to mention. If you didn't laugh, you'd cry...

Error in posting billing document ( Export Data Missing)

Hi Gurus,
I am facing a unique problem. When I am posting a domestic invoice with reference to service order material Group is LEIS( service withought delivery ) is LEIS, the system is displaying a message Document & has been saved (foreign trade data incomplete)
. When I run the similar transaction in a replication of above system there is no error displayed.
Also the customer is not permitting me to maintain the foreign trade data, as he says when we are not executing
Export transaction, why should we maintain this data???
We have replicated the masters in the parallel system & taken the same parameters to excute the transaction,
Please advice as to where this difference in behaviour is???
Also how do I overcome the export data error for domestic transactions.
Edited by: mukesh kumar on Jul 24, 2009 2:23 PM

Hi
This is because of the Foreign Trade: Export Data view selected for the material.
Check your material master whether the Foreign Trade: Export Data has been selected. If it is selected you will encounter the issue during the invoice creation.
Regards
Rajkumar K

DCOM error "1260" on Windows 2008 R2 terminal server when SAP exports data into Office 2007 (Excel or Word)

Hi all,
We are experiencing an issue which happens at random whenever a user tries to export data from SAP into Excel or Word. Excel or Word is started but remain empty. We then see the below errors in the event log. And the problem is very random
as sometimes all they have to do is wait 10 minutes and the next try will be successful. Not even log off/on. Could someone tell me what the error "1260" is saying?     thanks for your help.
Pete
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          7/23/2013 4:07:36 PM
Event ID:      10000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Servername.domain.com
Description:
Unable to start a DCOM Server: {00020906-0000-0000-C000-000000000046}. The error:
"1260"
Happened while starting this command:
"C:\Program Files (x86)\Microsoft Office\Office12\WINWORD.EXE" -Embedding
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          7/23/2013 3:54:34 PM
Event ID:      10000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Servername.domain.com
Description:
Unable to start a DCOM Server: {00024500-0000-0000-C000-000000000046}. The error:
"1260"
Happened while starting this command:
"C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE" /automation -Embedding

Hi,
Based on my research, please try the following:
Click Start, click Run, type regedit in the Open box, and then click OK.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\termsrv
Under this subkey, add the following registry entries:
Name
Type
Value data
Logoff
REG_SZ
TSEventLogoff
Logon
REG_SZ
TSEventLogon
Restart the Terminal Server computer.
Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry
before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, please refer to
How to back up and restore the registry in Windows.
Hope this helps.
Best Regards
Jeremy Wu

Error while exporting data from 9i

When we try to export data from 9i db getting below error.
Db version : Oracle 9i Enterprise Edition Release 9.2.0.5.0-64 bit
cmd : exp user/pwd@db file=test_dmp.dmp tables=state
Export utility: Release 11.1.0.6.0
Error:
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully

Hi,
You must export with the 9i version of exp, and import in the 11g database (if that's what you want) with 11g imp.
Regards,
Mario Alcaide

Error while exporting data from sql server to excel

Hi,
I am trying to export data from sql server to excel.
The query that I used is s follows
INSERT INTO OPENROWSET( 'Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\Folder1\abc.xls','select * from [Sheet1$A1:IV65000]')
select
column1,column2.... from Table1
I get the following error message while doing so..
String or binary data would be truncated.
The statement has been terminated.
One of the column's holds data more than 225 characters.
What is the way to correct this, i want the whole data of the colum in the excel sheet.

I haven't had great luck with the INSERT INTO OPENROWSET method. Can you try one of the many samples from one of these 3 links?
http://www.excel-sql-server.com/excel-sql-server-import-export-using-vba.htm#Excel%20Data%20Export%20to%20SQL%20Server%20Test%20Code
http://www.mssqltips.com/sqlservertip/1540/insert-update-or-delete-data-in-sql-server-from-excel/
https://www.simple-talk.com/sql/database-administration/getting-data-between-excel-and-sql-server-using-odbc--/
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Error while exporting data

i get the following error while exporting data evn after running catexp.sql
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
can anyone help me on this

copy past from the notes referred above -
Symptom(s)
~~~~~~~~~~
You are performing a database export against your 9.2 database. The database
export abnormally ends with the following errors:
EXP-00056: ORACLE error 31600 encountered
ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function
SET_TRANSFORM_PARAM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
ORA-06512: at "SYS.DBMS_METADATA", line 836
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
Change(s)
~~~~~~~~~~
One of the known causes for the error above is that a patchset was recently
applied to the database but one or more of the patchset steps were not
performed.
Cause
~~~~~~~
View the readme notes for the patchset recently installed. You will see a step
that should have been performed that directs you to run the script named
catpatch.sql. Very likely this step was never performed.
Fix
~~~~
As the sysdba user run the catpatch.sql script found in the directory named
$ORACLE_HOME/rdbms/admin. Before you submit this script, view it's contents.
You may see that this script places the database in restricted mode.
rgds

HT3275 My time machine does not back up and giving me this error message: The backup disk image "/Volumes/Data-1/Amiel's MacBook Pro.sparsebundle" is already in use. Pls help.

My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.

Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category.

HT201514 When I try to back up ,I get the error message:The backup disk image "/Volumes/Data/ iMac.sparsebundle" could not be accessed (error -1).

When I try to backup I get the error message.The backup disk image"/Volumes/Data/iMac.sparsebundle" could not be accessed(error-1) Any Ideas? it was working fine and i can't think of any changes I made to the system to affect this?

Start with the best resource available..... Time Machine --- Troubleshooting from Pondini, the wizard of all things Time Machine.
" . . . sparse bundle could not be accessed (error -1)"

HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use. Time machine could not complete backup. Can anyone help me?

My Time Machine is not backing up and gives me this error report:
The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
Time Machine could not complete backup
Can anyone help me?

Look at the discussion on the following forum:
https://discussions.apple.com/thread/3882138?start=0&tstart=0
The responses given there may help.

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Error: Export data missing

while Invoice-Release to accounting I got error as "Export data missing"
when I check I found that Foreign trade data is incomplete as per system. Also I have seen foreign trade no also in invoice foreign trade/customes view.
I dont know why this error is coming. system is asking to complete foreign trade for which no customizations available.
So I want to know what triggers to generate foreign trade no means why it has become essentials to provide these data?
which master data are important to trigger foreign trade? I have not maintained anything in foreign tarde view in material master.
Also let me know how can I resolve this problem?
Vijay

Hi Vijay,
The note 173411 described that there are hard-coded checks for the
listed in the note. If you choose for business reasons not to use the
incompletion procedure, then it can be de-activated. For this, kindly
refer to note 118573.
Please complete the following steps:
- create a new customer project via CMOD.
- assign the enhancement V50EPROP (which contains the userexits) to
the customer project.
- place source code inside the include found in exit_saplv50e_005
& _006, for example,
INCLUDE ZXV50U06
       if ( i_exp_imp_flag eq 'E' ).
         clear: c_complete.
         c_complete = 'X'.
       endif.
- generate the two new objects (exit_saplv50e_005 & _006) via
SE37.
- activate the project via CMOD.
========================================================================
If foreign trade functionalities are to be used, the corresponding
customizations must be maintained using transaction VI29 and VI49.
note 354222    Foreign trade data incomplete for domestic business
may also be helpful.
Thanks,
Alex

Error in importing data from multiple ASCii files, Concatenate

I am trying to use the "Importing Data From Multiple ASCII FIles.VBS" and the "Concatenate Groups.VBS" scripts downloaded from here, http://zone.ni.com/devzone/cda/epd/p/id/3870. When I run the importing data script and test it by highlighting the example data that comes with the download I get an error. "Error in <Importing Data From Multiple ASCII Files.VBS> (Line:60, Column: 11): Variabls is undefined: 'AscIIAssocSet' "
The offending line of code is " Call AsciiAssocSet(FilePaths(i), StpFilePath) ' assign STP file "
Screenshots of the error are attached.
Can anyone tell me what this error is? Am I just doing something wrong? Getting quite frustrated.
Thanks in advance.
Attachments:
concactenate1.png ‏261 KB
concactenate2.png ‏243 KB

Please have a look at the DIAdem Example to concanate channels. Its delivered with DIAdem.
Examples > Creating Scripts > Scripts > Appending Channels to Each Other
Please use a dataplugin (File -> Text DataPlugin Wizard...) or the csv plugin to load your data.
Greetings
Andreas
P.S.: The one you have downloaded needs the old Ascii Wizard that is not activated by default in newer DIAdem versions.
If you want to use it anyway:
Settings -> Options -> Extensions -> GPI Extensions ...
Add gfsasci.dll

EA2 export data disappears after error

The export data menu item in the result set context menu disappears after you created an error. E.g. after sending the following statement:
select dummy|| dummy|| dummy|| dummy|| dummy|| dummy from dual;
The call of "export data" raises an error message that the identifier for the column is too long. After that, the menu item "export data" is gone.
Regards,
Sven

Skutz,
Thanks for the response.
Yes, the problem with the export menu option disappearing is fixed with EA3.
As to when the error with the long column names not being able to be exported was previously fixed, I saw the problem (ORA-00972 with the example query given) from versions 1422 through 2579, but not in the subsequent version (2998?) where it was fixed to not cause the error.
On not wanting to rewrite my original base query - SQL Developer is already rewriting it, which is what is causing this problem. I assume the rewrite you are doing simplifies the case where only some of the columns are exported.
My query is, for example:
select dummy|| dummy|| dummy|| dummy|| dummy|| dummy from dual
This runs fine and produces the expected result. SQL Developer's query for exporting is (from what you have said), in that example:
select "DUMMY||DUMMY||DUMMY||DUMMY||DUMMY||DUMMY" from
(select dummy|| dummy|| dummy|| dummy|| dummy|| dummy from dual)
This fails with the "ORA-00972" error, preventing me from using the export functionality for a query that I can run successfully.
I know that the work around is to provide an alias for the column, but the fact that I can apply a work around to my query doesn't change my opinion that it is SQL Developer code that is doing the wrong thing with my query (a bug to me) that is preventing me from being able to us the export functionality for that query.
It is a relatively minor thing, but another example of something that you would expect to work (it certainly does in TOAD) which takes some of the shine off a basically good product.
theFurryOne

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

Export Data - Error: 1005000 Ascii Backup

Similar Messages

Maybe you are looking for