Export Data Sources DEV Transport to Acceptance

Hi Friends I am having a Export Data Source 80VELEXT created in Development System. When I transport that Datasource to Acceptance. It is not getting activated. I checked in RSLOGSYSMAP Table. I do not see the DB4CLNT120 --AB4CLNT110 Check mark. Is it required to be ticked to activate this. But when I consulted MY SAP Basis team they told it is not required to be checked. They told only D53CLNT120 -- A53CLNT120 ECC - ECC is only required. Please help me how to activate this Export Datasource in Acceptance.
Thanks
Soniya Kapoor

Hi Ravi, Please tell me exact step where you want me to change the source system to your Acceptance system Is it in the table RSLOGSYSMAP. OR where. I just created these datasources IN BI and nothing else is required no dtp no trans nothing. Just the Datasource and I need to transport this.
Please help
Thanks
Soniya

Similar Messages

BW export data source DEV- QAS transport

Dear Gurus
There are
two problems with trancport DSO 0cfm_o01 to Quality System.
Export datasource 80CFM_O01 has been transported to QAS without DSO,
and I can't
delete it from QAS(changes possible) via RSA1, RSA6
(Mapping
between 80CFM_O01 BWQCLNT001 80CFM_O01 is inconsistent).
Please,
help with transport DSO with nessesary object and generating datasource
80CFM_O01
Best Regards,

Have you tried to transport DSO from Dev to Qua?
if not then please transport your DSO from Dev to Qua.
While collecting DSO into transport from RSA1-->transport connection, use grouping option as only necessary objects.
Cross check, your DSO need to be stored in custom package instead $tmp.
Cross check your transport request have any inconsistencies or not thru program - RSO_TLOGO_CHECK_REQUEST .

Error While Transporting export Data Source

Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin Motgi

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

Export Data Source Transport Problem

Hi All,
I have IO FI Super Number - did export data source for that and generated 8zfssupno for myself BW system in Dev system.
Used that export DS for another MD Account and created transfer rule.
Now when i try to transport the Request to QA env. the export DS request shows status succesfull but cannt find 8zfssupno DS into QA system and my transfer rule request has been failed to transport.
i collected DS twice but both requests are also not identical.
One has Object Directory Entry -->R3TRISFS8ZFSSUPNOT
and the other one dont.
i can see my export DS in t-code RSA6 also.
Do i need to transport the main IO FI Super Number before transporting export DS ?
can someone pl. give me the solution ?

the error log:
Extract structure /BIC/CE8ZFSSUPNO is not active
The extract structure /BIC/CE8ZFSSUPNO of the DataSource 8ZFSSUPNOT is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
<b>Thats means DEV BIW should have conversion mapping with QA BIW as the source system conversion.</b> ---> How to do that ? understood that its for myself BW system so it should be covert to QA from Dev.
Yes, finally i did it manually. but as u said it should work i can try to transport it to other env. please advise.
Message was edited by:
        Keral Smith

*** Transporting Generated Export Data Source *** urgent issue

Hi All,
I have generated export data source from info object Company Code,
And trying to transport the Export data source, i.e. 8Company_code to QA system.
Its showing the log that, imported sucessfully, but, i can't see the object in QA.
Iam currently working on BW 3.5 system.
Please help.
Thanks,
Nisha

Hi Luis,
Thanks for this.
Yes, i went into Transport connector >> choosen the object >> Data flow before >>
Ticked the Data sources >> changed the Package from $TMP to ZXXX >> Generated Transport request >> Released it >> Transported it.
But, still can't see....
Cheers,
Nisha

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Problem with delta update on customised export data source.

Hi all BW gurus,
I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
Does anybody have some idea on this?
I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
And how do others do for executing delta update of the customised data source?
Thanks a lot!!
The utility program of <Z_CHANGE_DELTA_PROCESS>:
=================================================
report z_change_delta_process .
*P_DATAS DataSource
*P_DELTAP Delta Process for DataSource
parameters:
p_datas type roosource-oltpsource,
p_deltap type roosource-delta.
tables:
roosource.
data:
ls_roosource type roosource.
if p_datas(2) ne 'Z_'.
   message 'The DataSource needs to begin with ''Z_''.' type 'E'.
endif.
select single * from roosource into ls_roosource
       where oltpsource = p_datas
       and objvers = 'A'.
if sy-subrc eq 0.
   ls_roosource-delta = p_deltap.
   update roosource from ls_roosource.
message 'The DataSource has been updated successfully.' type 'I'.
else.
   message 'The DataSource entered is not valid, try again.' type 'E'.
endif.

Doesn't anyone have any idea on this topic?
Appreciate for all the help. Thanks.

Mass collection of data sources in Transport request.

Hi All,
I want to capture the data sources which are available in RSA5. It is already activated and captured in Transport Request. But the Transport request was deleted by somebody.
I want to re-capture the activation of data sources which are there in RSA5. I want to collect 90 data sources in one Transport request.
Can you please guide me a easy way to capture all the data sources in transport request.
Thanks.

Hi,
you might be able to create a new Transport request and add the datasources manually.
check out the table roosource for the sources. you can find your's by filtering on tstpnm.
add the sources with object 'R3TR' and subobject 'OSOA'.
regards
Siggi

How to find Info Source for Export Data source in Data Marts node

Hi
I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
Thanks
Padma

In the infosource tab in RSA1 - use settings --> display generated objects
you will be able to see the datamart infosources..

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

Regarding Export Data Source !!!!!

Hi Gurus,
i have a requirement to create a export data source in production system for master data infoobject.then i have to replicate it into Development system. The doubt is once this export data source is created in the production system where i can find this? RSA5...or there is some other transaction? and before replicating these export datasource to Developmentsystem, do i need to activate it?( I know there is prefix of 8 in export data source).
Immediate reply will be appreciated.
Thanks in advance.
Regards.
Agupta

Hi,
You can create it> master data InfoObject>rt click>additional function>export data source.Now you can find it in the datasources in the Source System. Go to Source systems and go to Datasource overview for your BW system. You should find the datasource 8****** under BW Datasources-> Business Info Warehouse -> Data Marts -> Data Marts Master Data.
Regards
CSM Reddy

Help with Enhancing Export Data Source

Folks,
I have a scenario where the infocube is used an export data source
In the data source I realize that the 0customer is not available
I changed the extract structure of the datasource to include 0customer but I have still not got the 0customer as part of the datasource
Would appreciate help on how the datasource can be enhanced to include 0customer; pls note that the infocube does have 0customer
thanks for your time
regards

Hi,
Can you tell me which datasource you are using to extract the value for 0customer from R/3?
You check the data source for data ( For 0customer) by using the extract checker tcode rsa3.
You can also check for the datasources in r/3 by uising the tcode rsa6.
Hope this helps.
Regards,
K.Manikandan.

Export Data Sources DEV Transport to Acceptance

Similar Messages

Maybe you are looking for