Export datasource on a cube

I have a export datasource for a custom cube. It is returning with zero records whenever we do extraction. I have regenerated it but it has not helped.
It gives no records even in RSA3. Although data is present in Cube.
Thanks in advance for your help.

Hi,
When you extract data from the cube, the view of the fact table is important because if you have compressed the data in the source, then data needs to come from the F and the E table, hence the view is needed. If this is corrupt for some reason, the extraction does not happen. Running this program will recreate the fact table views for all the cubes. Should not take too long...
Hope this helps...

Similar Messages

Error while generate export datasource.

Hi Experts,
APO - 3.0A(BW-2.0A)
In APO while creating generate export datasource for a cube, I am getting the following error.
Creation of InfoSource 8XXX for target system BW 1.2 failed - Message no. RSBM 026
Diagnosis - Failed to create InfoSource &v1& for target system BW 1.2.
System Response -
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Any help is highly appreciated.
Thanks&Regards,
VJ

Thanks Rebort,
Just now I completed it after searching for OSS note. Anyhow thanks for you help too.
Now I am facing a different problem. The generated DM infosource is not available under InfoSource - DM.
I have changed the ODS setting from Hide to Show
also InfoSources - RC - insert lost nodes..
no luck.. any suggestion
Regards,
VJ
Message was edited by: Vijay Kumar

Are Export DataSources always 3.x format? Can they be migrated to 7.0 DTP?

Hi,
I am extracting for a BW Export DataSource into a cube. It seems that when you generate an Export DataSource, the DataSource in 3.x format.
I first created the ETL using the 3.x scenario.
i.e Export DataSource->Transfer Rules->InfoSource->Update Rules->Cube
I then wanted to move the DTP for improved efficiency and so created a new 7.0 InfoSource and built the 7.0 scenario
i.e Export DataSource->Transformation->7.0 InfoSource->Transformation->Cube and all works well.
I'm now trying to remove the 3.x scenario, but it causing problems because the Export DataSource remains 3.x.
If I try to delete the 3.x DataSource, it wants to remove dependent objects (which are both 3.x & 7.0 scenarios).
If try and migrate the 3.x DataSource to 7.0 (Rightclick: Migrate), it gives me an Error Message no. RSDS163 - Export DataSource 8AUEQUIPMTM(CBW230ALE) in myself system: Object type RSDS not possible
I can't find anything on OSS, but I suspect Export DataSources are not supported in the 7.0 format as yet.
As such, I am required to leave 3.x scenario intact to process the 7.0 scenario.
This isn't a great problem, but it is a little messy and confusing for the person administering the loads.
Can anyone tell me if it possible to make an Export DataSource into 7.0 DataSource?
Many thanks
Adrian

Hi,
when needed, you can indeed convert datasources from v3.5 to V7, and back, using transaction RSDS. Choose "with export". This "saves" the "other" version, and so it can be "restored" afterwards via RSDS again.
This is also true after DS replication from a sourcesystem, when the system asks whether you want the new replicated DS to be 3.X or V7. Either you choose, you can convert afterwards if needed.
Regards
hugo vandenabeele
senior BW consultant

Export DataSource doesn't work.

Hi, experts!
I've generated export DataSource for the cube 0FIAP_C03 in BW 3.5. Cube 0FIAP_C03 contains lots of data, but when I run test rsa3 - 80FIAP_C03, I don't get any data. I have the same result in the target system BW 7.0.
I've done the same export DataSource for the cube 0FIAR_C03 and it works fine! Why I have troubles with 0FIAP_C03?
Thanks for all advices.

Problem's solved.

Program to generate export datasource

Hi All
Is there a program to generate 3.x export datasource on a cube with out creating a transport request in BI7
Thanks for the help

Have you tried RSA1old transaction with $tmp package? later you can delete this.

Export Datasource Question

Task : To load the actuals into a planning cube.
After generating an export datasource on a cube infosource 8CUBE is created.
When I create an infopackage ..in the Datatargets tab how do I find the planning cube..?
What am I missing here ..?

Hi,
Assuming you have created update rules from the 8CUBE to the planning cube, right click > Switch Transactional Cube > Choose Can be Loaded.
This can also be done using FM (so that you can switch between the 2 states in a process chain and automate the process)
Hope this helps...

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

Export datasource from Cube - PSA shows no data

Hi All,
I need to create an export Datasource from cube.
I right clicked on the cube-> Additional functions-> Export DS and the DS was created.
But when I check the PSA, I see no requests.
But in case of a DSO, we can see all the requests in DSO as requests in the corresponding export Datasource PSA as well.
What am I missing out in case of a cube. Why is there no data in the PSA?
Please advice.
Thanks,
Shyam

Hi,
But when you make the cube as data source for APO target, PSA won't be exist. PSA is only at first level, it holds source data , i.e ECC Data.
after making export data source, you make connections/transfer rules whatver related APD terms, make it and try to load and see the data is coming right formate or not.
Thanks

CUBE Export DataSource - No Records Returned

Hey guys,
    I`m having a strange problem in the system.
    (1) I Righ-Click on the InfoCube and Generate Export DataSource
     (2) I am able to find the 8DataSource in the InfoSource area
     (3) When I RSA3 on this DataSource it returns NO data at all.
    I have repeatedly tried this for many Cubes in my system but same issue remains.
    However, when I do the same for DSO, I don`t have any problems as in the Export DataSource for DSO's returns data in RSA3.
    Please help

Hi,
Make sure Source cube has data,
is it Active the target cube/source cube.
log off and login in to the system so that system will get refreash,
try to delete req without data and repeat the load.
i think one of the above should work in any case....
are you using BW 3.5, if so check it in one of the root in datamart...you should find the EDS....
Kiran

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

Migration 3.x data source to BI 7 run into problem - Export Datasource

Dear Expert,
I have got a problem with the data source replicated from BW 3.5 into BI 7.
The details are as below:
- I replicated the BI 7 for a data source 8ZRAC_DSO from BW 3.5
- after replication, the version of data source remain as Modified
- I am not able to activate
- In order to activate it, I try to perform the migration with the option of 'with export'
- I got stuck with the error message as below:
'Export DataSource 8ZRA_DSO (BIPCLNT100) in myslef system object type RSDS not possible'
Do you have any suggestion to resolve this problem?
Is it a right way to get the data source activated?
Thanks and appreciated.
Arthur

With 7.0 export datasources are obsolete. And the system doesnt allow you to do the migration. Instead you would need to create a transformation between the Original DS/Infosource to the Target.
Example -
Updating data from ODS to Cube
Right click on Data store object-> create transformation ->give the target cube name->give the load option either full or delta-> activate the transformation and load data from ods to cube by clicking execute in third tab
DTP required between DSO and Infocube to handle DELTAS.
Edited by: sam hennry on Mar 21, 2008 3:25 PM

Generation of export datasource - datasource does not appear

Hello Guys,
I hope you can help me. I searched half the day in the SAP system and also google but couldn't get any help for my issue.
Situation:
I have already generated, activated export datasources and loaded with them from a BW in USA to EUROPE some transactional Data and master data. No problem (sales data, materials, 0ustomer).
But!: When i try to generate a export datasource for 0SOLD_TO and 0Ship_To infoobjects i receive the usual message "Datasource succesfully generated", but i never receive the expected 80Sold_TOT/80Sold_TOM resp. 80ship_TOT/80Ship_TOM datasources entry in the datasources tree! They simply dont get created at all.
Of course i did the replication (first in the source BW and also in the Target BW) but they both never appear.
Interestingly i have only an entry for 0SOLD_TOH (for the Hierarchies). But as explained not for the texts or the attributes.
My thought was that it might has to do with the fact that 0Sold_to and 0Ship_to are referenced characterisicts to 0customers?! but this would be strange in my eyes because in that way i would not be able to extract the attributes which are only connected to Sold-to and Ship-to!
I hope my question is clear for you and someone can help me!
Thanks a lot!
Regards
Andreas

Ok, I did the test now and it confirms our theory: No, export datasource are generated for IO's which are based on referenc. chars.!
This brings me really to the question: What should i do now to extract the Z-Attributes which belong to the objects 0Sold_to and 0Ship_to? I am not allowed to change the reference char which is 0Customer.
I need the export data sources because we extract the data from a USA BW on 7.x to a EUROPEAN BW 7.x
For me there is no other way known than this to transfer master data and transactional data from the DSOs and Cubes. Right?

Can you include navigational attribute in export datasource

Can you include a navigational attribute in an export datasource? If so, how.
Thanks.
Sandy

hi sandy,
i don't think so. navigational attributes are not available. you need to understand that in case of an ODS object the export data source is generated out of the change log table, so if any field missing in the change log table it will not be part of the export data source.
In case of cubes the characteristics and key figures reflects in the export data source.
but why do you need navigational attributes in export data source ? it conflicts the nature of nav attributes as you will be storing the history statically with reference to the data when it was loaded. if you really want the same nav attributes in your subsequent data targets then include the characteristic which has the desired nav attributes in your target cube and map it from the export data source of the source info-provider. Switch on the nav attributes in the target info-providers.
hope it helps
thanks
soumya

Cant find Export Datasource ..

Hi
   I need to copy Cube content(0SD_C04) to (ZSD_C04) Cube.So generated Export Datasource from (0SD_C04) .I can view them (80sd_c04) under Myself   So urce system - Datasource Overview.But i cannot view them in INFOSOURCES..Under which Appl.Comp it gets placed??
thanks

Hi Obuli,
   Check settings to display export datasources from Menu: Settings --> Display export Datasources --> Show generated ODS objects.
   Still not available ... then goto RSA1 --> Infosource --> From context menu(Right click) of Infosouce --> Choose "Insert Lost Nodes".
Refresh and check.
Hope it Helps
Srini

How to: Deleting a Exported Datasource

Hi Guys,
Does anyone know how I can delete an export datasource in BWdev. I have deleted the source system (BW system) and the trans rule, comms structures and infosource for exported data source. However the original source cube still shows the green 'maintain export datasource' icon next to it. How can this be reomoved?
Thanks
Depesh

Hi Depesh,
go to transaktion SBIW and delete the datasource.
Postprocessing of DataSources -> Edit DataSources and Application Compponent Hierarchy -> BW -> DM -> Find your datasource.
hope that helps,
Michael
Message was edited by: Michael S

Export datasource on a cube

Similar Messages

Maybe you are looking for