Export Datasource Question

Task : To load the actuals into a planning cube.
After generating an export datasource on a cube infosource 8CUBE is created.
When I create an infopackage ..in the Datatargets tab how do I find the planning cube..?
What am I missing here ..?

Hi,
Assuming you have created update rules from the 8CUBE to the planning cube, right click > Switch Transactional Cube > Choose Can be Loaded.
This can also be done using FM (so that you can switch between the 2 states in a process chain and automate the process)
Hope this helps...

Similar Messages

Generation of export datasource - datasource does not appear

Hello Guys,
I hope you can help me. I searched half the day in the SAP system and also google but couldn't get any help for my issue.
Situation:
I have already generated, activated export datasources and loaded with them from a BW in USA to EUROPE some transactional Data and master data. No problem (sales data, materials, 0ustomer).
But!: When i try to generate a export datasource for 0SOLD_TO and 0Ship_To infoobjects i receive the usual message "Datasource succesfully generated", but i never receive the expected 80Sold_TOT/80Sold_TOM resp. 80ship_TOT/80Ship_TOM datasources entry in the datasources tree! They simply dont get created at all.
Of course i did the replication (first in the source BW and also in the Target BW) but they both never appear.
Interestingly i have only an entry for 0SOLD_TOH (for the Hierarchies). But as explained not for the texts or the attributes.
My thought was that it might has to do with the fact that 0Sold_to and 0Ship_to are referenced characterisicts to 0customers?! but this would be strange in my eyes because in that way i would not be able to extract the attributes which are only connected to Sold-to and Ship-to!
I hope my question is clear for you and someone can help me!
Thanks a lot!
Regards
Andreas

Ok, I did the test now and it confirms our theory: No, export datasource are generated for IO's which are based on referenc. chars.!
This brings me really to the question: What should i do now to extract the Z-Attributes which belong to the objects 0Sold_to and 0Ship_to? I am not allowed to change the reference char which is 0Customer.
I need the export data sources because we extract the data from a USA BW on 7.x to a EUROPEAN BW 7.x
For me there is no other way known than this to transfer master data and transactional data from the DSOs and Cubes. Right?

I want to Authorize on export datasources

Hi all,
I have a security issue on our BW system. Our BW system is also a source system to several global BW systems. We have restricted this access by using transaction SBIW - Limit Authorizations in the past. The downside of this approach is that you have to maintain this transaction for all datasources. Most systems that extract data from our system only need two or three dataflows.
We have upgraded to BI 7.0 and would like to use a normal authorization profile to get the same thing done. For transaction data, we can use autorization objects S_RS_ODSO and S_RS_ICUBE to restrict on export datasource. I am however unable to find a authorization object that gives the same autorhization for infoobjects.
I have two questions:
1 does anyone know an authorization object for 'export datasource' authorization on infoobjects?
2 Does anyone know an authorization object on export datasources in general? Ideally I would need one authorization object, to authorize on export datasources that can be used by a Remote user on our system.
Any help would be appreciated.
Regards,
Jaap

Try Here > http://support.apple.com/kb/TS1583
And See this Discussion...
https://discussions.apple.com/thread/4204776?start=0&tstart=0

What is GENERATE EXPORT DATASOURCE

Hello gurus,
When we right click on Master data infosource we have a option like GENERATE EXPORT DATASOURCE, so what is the significance of that and what actually happens when we press that.
I ll surely award points.
Thanks

Dear Khanna,
When u click on export data source option, system generates a infosource.
Actually this is required when u want to send data from one infoprovider to another infoprovider in same system or in external BIW system.
In practice some times need comes for sending data from one target to another target. In this situation this is required. Many times u first load data in to ODS and then u send it to cube, this is the typical case you need export data source.
Once you click this, system created infosource from the same. useing this infosource and creating update rule u can load data in to another target.
Hope this answers your question.
regards,
Mahendra Sane

Do we need generate export datasource in BI

Hi
We are loading 3 standard datasources to PSA and PSA to 3 DSOs and 3DSOs to one consolidated DSO and we have not generated export datasources we are able to load the data, my question is when we use generate export data source.
Thanks
Kore

Hi
As per the business requirement for a multiple BI connections we need DATAMART technology and for standalone BI we donu2019t need Datamart technology (generate export datasource)
check these thread .
What is GENERATE EXPORT DATASOURCE
https://forums.sdn.sap.com/click.jspa?searchID=10732071&messageID=4737568
Generate Export datasource BI 7
Regards
Padmanabha

Corrputed loaded text from an Export Datasource with Unicode

Hi Experts
I am new with BW and this forum helped me a lot in the past year.
I am loading texts to an InfoObject using a Master Data (texts) Export DataSource from another InfoObject. The system is NetWeaver 2004s (BW 3.5) with Unicode.
The InfoObject's Text MD is Language Dependent but users enter the system only with EN language.
For some reason the loaded texts are corrupted.
For example: The original InfoObject has Hebrew texts (that were loaded perfectly from the source system which is also Unicode), but the text in the PSA table and in the text table of the target InfoObject will be: ###########
Can anyone help?

Hi Niraj
Thanks for your answers
Let me explain:
Currently, we load texts with Hebrew chars from the SAP ECC6 system and everything is good (we see Hebrew chars in SAPGUI/BEx/WAD etc.)
The problem occurs when we load these texts from one InfoObject to another, via Export DataSource.
To do that, We generated an Export DataSource for the original InfoObject and assigned it to the target InfoSource of the other InfoObject. After running an InfoPackage for this DataSource, the texts that were loaded to the PSA (and hence, to the target InfoObject texts table) were corrupted - which means that they appeared: ##########
Thanks,
Yaniv

Error while generating export datasource in Test and Prod system

Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
System setting does not allow changes to be made to object ISTD 80CRM_PRI.
while Prod system produces teh follwoing error msg
Changes to Repository or cross-client Customizing are not permitted
Choose 'Display object' or 'Cancel'.
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DV

Hi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia

Generate Export Datasource

Hi All,
While activating an ODS object, I got the error The creation of the export datasource failed. I tried activating the entire source system and replicated it. But still I am facing this issue. I checked the ODS in RSRV also. There it gave me the error Number of rows for active program and temporary program are different". I am facing this issue for newly created ODS objects also.
Can someone throw some light on this?
Thanks in advance,
Febina

Hi Febina Mohanan
Welcome to the board..
There are few considerations with your issue
1)Occured Because of Space issue Just check the space statistics in DB02 with the help of BASIS
2) Connectivity..
3) Just try in rsa1 Settings--->display Generated Objects >selct show generated objects->Continue..
4) Activate u r ds with the programe "RS_TRANSTRU_ACTIVATE_ALL"
Hope this will help...
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

Error while generate export datasource.

Hi Experts,
APO - 3.0A(BW-2.0A)
In APO while creating generate export datasource for a cube, I am getting the following error.
Creation of InfoSource 8XXX for target system BW 1.2 failed - Message no. RSBM 026
Diagnosis - Failed to create InfoSource &v1& for target system BW 1.2.
System Response -
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Any help is highly appreciated.
Thanks&Regards,
VJ

Thanks Rebort,
Just now I completed it after searching for OSS note. Anyhow thanks for you help too.
Now I am facing a different problem. The generated DM infosource is not available under InfoSource - DM.
I have changed the ODS setting from Hide to Show
also InfoSources - RC - insert lost nodes..
no luck.. any suggestion
Regards,
VJ
Message was edited by: Vijay Kumar

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

Generate Export DataSource from InfoCube In Production System

Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

DSO activation failed due to creation of the export datasource failed

hi experts,
i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
please advise, thanks!
attach error info:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
The delta process ODS does not exist
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZFIM_D09

Hi,
As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
Regards,
Durgesh.

Transport Error-The creation of the export DataSource failed

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.

No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_BID
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0BBP_QUO
/     The creation of the export DataSource failed
      User not authorized. Session terminated
      User not authorized. Session terminated
      Error when creating the export DataSource and dependent Objects
      Error when activating DataStore Object 0PUR_DS03
/     The creation of the export DataSource failed
      Name or password is incorrect (repeat lo gon)
      Name or password is incorrect (repeat lo gon)

The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02

Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).

Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren

Creation of export datasource failed

Hi All.
i copied a bussiness content data source object (DSO) and tried to activate it. it is giving error that
"The creation of the export DataSource failed"
Why ??? where m i going wrong.
Thanks & Regards,
Mo

Hello,
This is the problem becos the system is unable to create DATAMART for DSO object. The following reasons might be hindering the creation of DSO. Please check whether
1) You have proper authorization to create Datasource/Datamarts.
2) If so then, check whether DATAMART for the BW Self Source System is properly Installed from Business Content. (I hope you are working on the version 3.5 or later.. here we need to manually install Aplication Component related to Datamart from Business Content so that Datamart creation never fails after that)
3) Also check BW Self Source System is properly functioning.
Thanks
Kishore Kusupati
Edited by: Kishore Kumar K on Jul 28, 2008 5:35 AM

Export Datasource Question

Similar Messages

Maybe you are looking for