Export datasource
thanq u for giving reply,
i couldnt get any <b>sap application component</b> in infosource. i am using flatfile extraction , i think that this could be the reason why i am not getting <b>sap application component</b>
Message was edited by: shanthi bhaskar
Message was edited by: shanthi bhaskar
Hi Bhaskar and welcome to the SDN,
not quite sure about your problem, but I guess you need to replicate the datasources of source system myself after generating export datasources. Additionally you need to switch on 'display generated objects'. You can do that in rsa1->infosources by selecting Settings->display generated objects from the top menu. Don't forget to refresh the display after doing that.
regards
Siggi
Similar Messages
-
Corrputed loaded text from an Export Datasource with Unicode
Hi Experts
I am new with BW and this forum helped me a lot in the past year.
I am loading texts to an InfoObject using a Master Data (texts) Export DataSource from another InfoObject. The system is NetWeaver 2004s (BW 3.5) with Unicode.
The InfoObject's Text MD is Language Dependent but users enter the system only with EN language.
For some reason the loaded texts are corrupted.
For example: The original InfoObject has Hebrew texts (that were loaded perfectly from the source system which is also Unicode), but the text in the PSA table and in the text table of the target InfoObject will be: ###########
Can anyone help?Hi Niraj
Thanks for your answers
Let me explain:
Currently, we load texts with Hebrew chars from the SAP ECC6 system and everything is good (we see Hebrew chars in SAPGUI/BEx/WAD etc.)
The problem occurs when we load these texts from one InfoObject to another, via Export DataSource.
To do that, We generated an Export DataSource for the original InfoObject and assigned it to the target InfoSource of the other InfoObject. After running an InfoPackage for this DataSource, the texts that were loaded to the PSA (and hence, to the target InfoObject texts table) were corrupted - which means that they appeared: ##########
Thanks,
Yaniv -
Error while generating export datasource in Test and Prod system
Hi experts,
I tried to generate export datasorce on a cube in teh testing system so that i can use this as a datasource for another cube. I did this so that i can transport all teh relevnt objects from D to T. But Iam gettin teh following erro msg
<b>System setting does not allow changes to be made to object ISTD 80CRM_PRI.</b>
while Prod system produces teh follwoing error msg
<b>Changes to Repository or cross-client Customizing are not permitted</b>
<b>Choose 'Display object' or 'Cancel'.</b>
After i have done this and when i go to the context menu of teh infocube i can see maintain export datasource option.
Also I couldn't see the infosource generated in Infosources ( FYI I have already done display generated objects under settings)
Can anyone tell me how to proceed further.
Thanks,
DVHi DV,
Generally export datasource are not included in the request from the test server. It gets generated automatically when (ODS,Cube) based on which the datasource s transported to production / quality .
I think solution should be try not to include export datasource, infosource ,transfer rules to request from dev server.
Hope that helps.
Regards
Mr Kapadia -
Hi All,
While activating an ODS object, I got the error The creation of the export datasource failed. I tried activating the entire source system and replicated it. But still I am facing this issue. I checked the ODS in RSRV also. There it gave me the error Number of rows for active program and temporary program are different". I am facing this issue for newly created ODS objects also.
Can someone throw some light on this?
Thanks in advance,
FebinaHi Febina Mohanan
Welcome to the board..
There are few considerations with your issue
1)Occured Because of Space issue Just check the space statistics in DB02 with the help of BASIS
2) Connectivity..
3) Just try in rsa1 Settings--->display Generated Objects >selct show generated objects->Continue..
4) Activate u r ds with the programe "RS_TRANSTRU_ACTIVATE_ALL"
Hope this will help...
Regards
R M K
Assining points is the only way of saying thanx in SDN *** -
Error while generate export datasource.
Hi Experts,
APO - 3.0A(BW-2.0A)
In APO while creating generate export datasource for a cube, I am getting the following error.
Creation of InfoSource 8XXX for target system BW 1.2 failed - Message no. RSBM 026
Diagnosis - Failed to create InfoSource &v1& for target system BW 1.2.
System Response -
The InfoCube cannot be used as a data mart for a BW 1.2 target system.
Any help is highly appreciated.
Thanks&Regards,
VJThanks Rebort,
Just now I completed it after searching for OSS note. Anyhow thanks for you help too.
Now I am facing a different problem. The generated DM infosource is not available under InfoSource - DM.
I have changed the ODS setting from Hide to Show
also InfoSources - RC - insert lost nodes..
no luck.. any suggestion
Regards,
VJ
Message was edited by: Vijay Kumar -
The Creation of Export DataSource Failed Error while transporting ODS Cube
Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
The creation of the export DataSource failed
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJHi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan -
Generate Export DataSource from InfoCube In Production System
Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PMHi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards -
DSO activation failed due to creation of the export datasource failed
hi experts,
i am activating DSO, but failed. Cause is "The creation of the export DataSource failed"
there are many threads in the forum saying restoring the BI myself source system can address it, I tried many times, but failed.
I used program RSDG_ODSO_ACTIVATE to activate an already activated DSO, it returned same error and the original activated DSO turned into inactivated. So I guess there must be something wrong with the setting.
please advise, thanks!
attach error info:
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
The delta process ODS does not exist
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object ZFIM_D09Hi,
As I read the system RESTORE option should resolve your issue. From RSA1 try to restore your source system and try to active your DSO again.
Regards,
Durgesh. -
Transport Error-The creation of the export DataSource failed
Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSo i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
the request conatins just the DSO and not the Export datsource.i have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Has any one come across this kind of an issue.
Thanks in advance!!!!!
Regards,
Umesh.No it didnt seem to work still got the same password error..
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0BBP_BID
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon)
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0BBP_QUO
/ The creation of the export DataSource failed
User not authorized. Session terminated
User not authorized. Session terminated
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0PUR_DS03
/ The creation of the export DataSource failed
Name or password is incorrect (repeat lo gon)
Name or password is incorrect (repeat lo gon) -
The creation of the export DataSource failed 0FIGL_O06, 0FIGL_O02
Hello Expert,
I have an issue with the export data source creation,
This is the detail,
Thank you very much in advance for your kind help,
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The creation of the DataSource &v1& was unsuccessful.
System Response
Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
Procedure
Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).Niurka,
Is this datasource for a hierarchy? See if note - 403092 is relevant.
Viren -
Creation of export datasource failed
Hi All.
i copied a bussiness content data source object (DSO) and tried to activate it. it is giving error that
"The creation of the export DataSource failed"
Why ??? where m i going wrong.
Thanks & Regards,
MoHello,
This is the problem becos the system is unable to create DATAMART for DSO object. The following reasons might be hindering the creation of DSO. Please check whether
1) You have proper authorization to create Datasource/Datamarts.
2) If so then, check whether DATAMART for the BW Self Source System is properly Installed from Business Content. (I hope you are working on the version 3.5 or later.. here we need to manually install Aplication Component related to Datamart from Business Content so that Datamart creation never fails after that)
3) Also check BW Self Source System is properly functioning.
Thanks
Kishore Kusupati
Edited by: Kishore Kumar K on Jul 28, 2008 5:35 AM -
BW Myself source system in ECC 5.0 while Export DataSource!!
Hello BW Experts,
When we do Export DataSource for a DataMart eg:ODS, we have to again select our Myself BW source system and replicate our datasource to see it visible in the infosource tree with our DataMart name starting with 8*.
Plz clarify these Qs:
1. Can we perform "Generate Export dataSource " for customer generated DataMarts and replicate them in Myself BW source (Other than Business Content DataMarts??)??
2. Which is the Myself BW system in the ECC 5.0 version as everything is integrated and used being the source system as T90CLNT800 with the client 800and with a single userID and password.
Note:I could not find my generated Datasource for my customer generated DataMart to replicate the same using T90CLNT800 context menu.
Plz throw some light on this!!
regards,
Sapster...Points will be awarded.Hi,
You dont need to replicate the datasource after the generate export datasource. You can find your 8* datamart in the infosource by using any of these 2 methods:
1. Goto the top most of the info-source i.e. "Infosources" -> right click -> Insert lost nodes. You should be able to find your datamart.
2. Goto settings (menu) -> Display generated objects -> show generated objects.
Hope this helps.
Bye
Dinesh -
Are Export DataSources always 3.x format? Can they be migrated to 7.0 DTP?
Hi,
I am extracting for a BW Export DataSource into a cube. It seems that when you generate an Export DataSource, the DataSource in 3.x format.
I first created the ETL using the 3.x scenario.
i.e Export DataSource->Transfer Rules->InfoSource->Update Rules->Cube
I then wanted to move the DTP for improved efficiency and so created a new 7.0 InfoSource and built the 7.0 scenario
i.e Export DataSource->Transformation->7.0 InfoSource->Transformation->Cube and all works well.
I'm now trying to remove the 3.x scenario, but it causing problems because the Export DataSource remains 3.x.
If I try to delete the 3.x DataSource, it wants to remove dependent objects (which are both 3.x & 7.0 scenarios).
If try and migrate the 3.x DataSource to 7.0 (Rightclick: Migrate), it gives me an Error Message no. RSDS163 - Export DataSource 8AUEQUIPMTM(CBW230ALE) in myself system: Object type RSDS not possible
I can't find anything on OSS, but I suspect Export DataSources are not supported in the 7.0 format as yet.
As such, I am required to leave 3.x scenario intact to process the 7.0 scenario.
This isn't a great problem, but it is a little messy and confusing for the person administering the loads.
Can anyone tell me if it possible to make an Export DataSource into 7.0 DataSource?
Many thanks
AdrianHi,
when needed, you can indeed convert datasources from v3.5 to V7, and back, using transaction RSDS. Choose "with export". This "saves" the "other" version, and so it can be "restored" afterwards via RSDS again.
This is also true after DS replication from a sourcesystem, when the system asks whether you want the new replicated DS to be 3.X or V7. Either you choose, you can convert afterwards if needed.
Regards
hugo vandenabeele
senior BW consultant -
Export DataSource doesn't work.
Hi, experts!
I've generated export DataSource for the cube 0FIAP_C03 in BW 3.5. Cube 0FIAP_C03 contains lots of data, but when I run test rsa3 - 80FIAP_C03, I don't get any data. I have the same result in the target system BW 7.0.
I've done the same export DataSource for the cube 0FIAR_C03 and it works fine! Why I have troubles with 0FIAP_C03?
Thanks for all advices.Problem's solved.
-
MD export datasource not shown in MySelf (BW3.5) datasources
A user-defined (simple) InfoObject (NUMC-7), characteristic, has selected 'With Master Data', but NO texts.
It also does not have any attributes, compound characteristics or hierarchies.
So, it is a simple 'table of codes' without any text.
The object is defined as an InfoProvider and the InfoArea is set (and exists). We can see it there.
Also, the 'Characterist. is export datasource' is selected.
The M- and P-tables are generated, the object is activated successfully.
After (several) replication of datasources with the 'MySelf' system and activating the structures (ABAP program RS_TRANSTRU_ACTIVATE_ALL which we always use after replication), we can not see the generated export datasource (default: "8<objectname>M") in the list when executing RSA3.
Who can help us with this problem?
Did we do something wrong? Or is it not possible because there are no attributes (other objects that have real attributes and no texts are visible in RSA3)?
We need to distribute the values of this object to other BW-systems (which therefore require this export datasource...).
Thanks,
Theo van Amstel
[email protected]Hi Dinesh,
Yes I did, but as described in the initial description: the InfoObject is visible within the InfoArea defined in the InfoObject (so not in the Unassigned), that is not the problem. Activating an object that is defined as 'export datasource' should, according to my knowledge, be visisble in the RSA3-list.
But thanks anyway... -
Problem while generating an Export DataSource in our Productive BW system
Hi all
We are trying to generate an export data source in our productive system and for any infocube and we are getting the error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'." please see the following steps to reproduce the error, for ODS's everything it's working just fine
In the attached document, you will see he error
Best Regards,
BW Team
Steps to Reproduce the error
Please follow the next steps in order to reproduce the error:
1. Logon into BW production system
2. Go to TX RSA1
3. Find infocube "XXXX"
4. Right bottom on your mouse, go to "Additional Functions" and then select "Generate Export Data Source"
5. You will get the following error "SAP System has status 'not modifiable', Choose 'Display Object' or 'Cancel'."
The error is only happening with infocubes, for ODS's everything it's working just fine.
We already check several notes and in RSA1 the "Transport Connection" --> "Object Changeability" and everything seems to be OK, we used to do it but "something happened" and we cannot do it anymore
a"Hi Ramanjaneyulu
Thanks for your soon response, we are trying to do this in order to copy data from our productive system to our quality system for testing purposes
We have a SAP 730 and SP08 so the note does not apply because we already have it
The problem it's only happening with infocubes and no loads had been executed in the system during this process; for ODS's we can generate the export datasource without any problem
thanks
Carlos Deciga
Maybe you are looking for
-
Is it possible to trap the user's COMMIT and do something?
I need to do some actions when a user (actually a program that I can't access) performs COMMIT and close the session. My functionality is activated from triggers. I keep many variable in package. Before a session ends I need to do some final steps us
-
Pacman doesn't seem to connect
I am trying Arch 0.6 since it now has proxy support. I've run into a big problem here, though. I added the following lines to pacman.conf: ProxyServer = proxy.gcc.edu ProxyPort = 8080 When I try "pacman -Sy" I get a few lines that look like cur
-
Map Widget - Works on Mac but not in Author
OK, I'm a nube when it comes to Dashcode just so that's out there. I managed to build a custom map widget with Google Maps. The widget works perfectly on my Macs but not in Author. In Author the default place holder remains empty. If I click "edit HT
-
Please help: Extra Line Space after bolded word
I am in the process of editing a book manuscript in MS Word 2010, and there is an annoying problem that I cannot solve. I have tampered with all the line spacing options, but I'm at a loss. When I bold a word, it introduces an extra little line space
-
May I use my five Business catalyst websites to host . . .
As a creative cloud subscriber, may I use my five free Business catalyst websites to host my own site with my own domain name or are these five sites only for testing?