Export delimiters: ~R - is this just a straight 2 character delimiter?

Group,
We are doing exports from Oracle to other platforms and having delimiter problems - users inserted pipes, backslashes, whatever in the varchar fields.
I am wondering if the ~R is a 2 character delimiter as it appears, or does it represent an escape sequence like \n (newline) or \t (tab) in Unix/Linux?
Our Oracle team says ~R is literal, but I suspect it may not be.
Thanks,
Vince

Group,
Queston answered.
I looked at an extract using the ~R and it is a literal character. Got a developer to send me a file (like pulling teeth) and looked at it with a hex editor - sure enough, 2 chars, a tilde and an R.
Thanks anyway,
Vince

Similar Messages

TS3276 I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone

I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?

Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated!

I have AVI files that I need to be MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I have AVI files that I need to convert to MOV files so that I can edit them in Final Cut Pro. I am going to use Quick Time Pro for this....When I have the files open in QT Pro do I have to 'export' it or can I just 'save as', or is there even a difference? Thanks in advance for your help!

I strongly recommend you use compressor to do the conversion (if it will open the files - since quicktime will open them, it will more than likely do it.
Compressor allows you to customize presets and save them and apply them to multiple files. Although the interface may seem daunting, it's actually pretty simple.
Even if you can edit the avi in fcp, it's not a good idea. Liable to cause problems down the road.

Fcp wont let me export to the compresser 4 all of a sudden it taking me too compresser 3 this just started happen what do i do

let me export to the compresser 4 all of a sudden it taking me too compresser 3 this just started happen what do i do

I don't know why this just started to happen unless v3.0 were somehow moved from its location.
I once had FCP7 get confused between Motion 4 and Motion 5 when I failed to follow Apple's installation recommendations but never a problem with FCPX going to the wrong app. (But I don't use the Send to Compressor workflow.)
When you have the legacy apps already installed on your system, the new pro app download moves the old ones into a folder, named Final Cut Studio. That's what I was getting at when I suggested you create a new folder for C3.
Russ

Trying to export as a JPEG 2000 but very jumpy when I view it in quicktime. Is this just because the player doesn't support JPEG2000?

Trying to export as a JPEG 2000 but very jumpy when I view it in quicktime. Is this just because the player doesn't support JPEG2000?

JPEG2000 for a digital projector? The option you see in Compressor, or the QT export is NOT the format they need. You can only make that with special software. I had that asked of me to deliver, I tried using Compressor and the JPEG2000 codec...and it wasn't right. Ended up sending it out of house.
FYI

When I click on a link to a file, (for instance a Filesonic link) I used to get asked if I wanted to run or download the file. Now it just goes straight to download. How can I stop it doing this? Thank you.

When I click on a link to a file, (for instance a Filesonic link) I used to get asked if I wanted to run or download the file. Now it just goes straight to download. How can I stop it doing this? Thank you.

Go to Tools -> Options -> Applications -> Search for your file format, .zip,for instance,
Select ''' Always ask''' from drop down menu.

Hello again, I'm still learning about my imac so here I go with latest question- I've installed word 2011 and would like to know how to email the document I have just written straight to a recipient but can't seem to find how to do this. Please advise

Hello again, I'm still learning about my imac so here I go with latest question- I've installed word 2011 and would like to know how to email the document I have just written straight to a recipient but can't seem to find how to do this. Please advise in simple terms
Also how do I save to a file.
Thank you clever world!!

To save you file click the disc icon in the tool bar or file save as:
To email the Word document to someone compose a new message and click the paper clip to attach the Document.

How do I get photos onto my laptop. it just goes straight to sync, I have windows 7

I have tried to get my phone to allow me to import photos to the laptop from the Iphone. All to no avail.
Can anyone help.?

Thanks Randers, but I have already been there.
The problem is I don't know how to make the computer recognize the Iphone, so as to have the menu appear that asks, "do I wish to view files, etc". This menu is clearly the key, but I can't get it.
It just goes straight to Synchronisation.
I"ve checked the sttings in the control panel - Autoplay and set it to "Ask me everytime".
Is it significant that when I plug the Iphone into the computer, it doesn't show up on the file manager like everything else?

I had downloaded a app and i hit a inapp purchase that i did not want to buy but it had purchased it and had charged me it did not ask me for my username or password or even to buy it had just gone straight through

hello im new to this community and ive done in app purchases before however this inapp purchase was wrong and had charged me 109.99$
it did not prompt me or ask for my username and password, it also never asked me if i wanted to cancel or buy the **** thing it had just gone straight through
my question is how am i to get my money back please someone help me

All purchases are considered final, but you can try contacting iTunes support and explain what happened and see if they will refund or credit you : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
To try and stop it happening again, you should be able to turn off in-app purchases on your device via Settings > General > Restrictions > In-App Purchases 'off', and (depending upon what iOS version that you have on the device) you might also be able to set 'Require Password' to 'Immediately' on the Restrictions (the default is a 15 minute period during which it doesn't need to be re-entered)

MY computer crashed and I had to reload the operating system. I had purchased the export PDF. However, I had not back up since my purchase. The export no longer works, it just keeps circling and the message acts like it is doing it but it circles and

MY computer crashed and I had to reload the operating system. I had purchased the export PDF. However, I had not back up since my purchase and it is my understanding that this software is not stored on my computer. The export no longer works, it just keeps circling and the message acts like it is doing it but it circles and never completes. Msg says "uploading file to adobe exportPDF online"

Hi lisa99vano,
I'm sorry that your computer crashed. That's the worst. But, it shouldn't have affected ExportPDF, since that is an online service (provided you're using a supported web browser, and there's no firewall or proxy preventing ExportPDF from uploading). First, please make sure that you're using a supported web browser: http://www.adobe.com/acom/systemreqs/
Next, I think we should consider the file that you're trying to convert. How big is it? Had you tried converting it before the crash? Does it contain both text and graphics? Do other files convert without issue?
I look forward to hearing back from you with some specifics about the file.
Best,
Sara

Downloading a file would bring up an option to open the file or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else?

Downloading a file would normally bring up an option to open the file with the appropriate program or save it - for some reason now it just downloads straight to the download folder. Why? Problem with Firefox or something else? It's very frustrating - sometimes you want the file opened first so it can be discarded or saved to a different location.

Hey. that's great! Thanks for posting back with the outcome.

This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune

This just started happening.. I open Itunes and the little round rainbow loading indicator just goes on and doesnt stop.. My itunes wont function.. It gets stuck. Then i have to force quit.. I tried to shut down and restart. also reloaded the latest itune 11.1.3 and it still gets stuck.
i use an external HD and thats fine.. all files are in there. But I have no idea why my itunes app is getting stuck.
Am I the only person this is happening to? What can I do to correct this problem?

Hi marlonbnyc!
This article will help provide some basic troubleshooting steps that will serve as a guide for you to resolve this issue:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

When I load Safari on my IPAD2, the web page comes up, but I can't scroll down the page. No matter what web page I go to the content stays darker than the navigation bar. This just started today. All other applications work fine.

When I bring up Safari on my IPAD2, the web page comes up, but I can't scroll down the page. This just started today. No matter what web site I go to, the content is darker than the navigation pane.

If it's happening on all sites, then assuming that it's Safari that you're using, have you tried clearing it's cache : Settings > Safari > Clear Cache (other browsers should have similar options, possibly within the actual app instead of within Settings). You could also try closing the app completely : from the home screen double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app (or whichever browser you're using) to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If it's only happening on a particular site then there may be content on that site that isn't supported on the iPad e.g. flash, java, silverlight

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows). The key behaves the same for the laptop keyboard and for an external Apple keyboard? This just started in last week after 6 months of use

My left shift key on Macbook Pro Retina (15") is behaving like the F11 key (show/hide open windows).
The left shift key behaves the same on the laptop keyboard and on an external Apple keyboard.
This just started in last week after 6 months of use. The right shift key and other keys on the keyboard all appear to work correctly.
Suggestions greatly appreciated.

I have a solution to this issue now after a discussion with Apple Support. Some where in the last few weeks, there was a change in the key that would do a Show Desktop under the Mission Control settings in the System Preferences. Even though the key sequence that was shown for the Show Desktop setting did not include the Left SHift key, by changing this first to having no key sequence and applying that and then changing it back to the F11 key, the Left SHift key issue that I was having has cleared up.
A second issue that was uncovered was that the SSD had some issues (uncovered when I ran Disk Utility using the Repair Disk key). I had to restart and use the Disk Utility through the Command R sequence to get to the stand alone Disk Utility. The SSD appears to be running better as a result as well.
Hope that this is of use to someone else in the future.

Osx 10.7.4 safari 6.0 when I add a new bookmark to the "bookmarks menu" it is added somewhere in the middle instead of at the end of the list. this just started a few days ago after an update. Has anyone else noticed this?.

osx 10.7.4 safari 6.0 When I add a new bookmark to the "bookmarks menu" it is added somewhere in the middle instead of at the end of the list. This just started a few days ago after an update. Has anyone else noticed this?.

Just for those who are interested, this is what cleared the "bookmark menu" trbl I had.
Open System Preferences > iCloud
Deselect the box next to Bookmarks, then reselect it.
Quit and relaunch Safari. Try a bookmark again.

Export delimiters: ~R - is this just a straight 2 character delimiter?

Similar Messages

Maybe you are looking for