Export dialog only for use with teleprompter?

I tried the official Story Plus teleprompter and didn't care for it (plus it has the same problem I'm having now).
HOW do you export dialog only from Story Plus for use with a teleprompter?
I've exported a TXT document and it included everything.  Additionally, it kept the formatting, so I have to go into a text editor and remove all the spaces.  Otherwise my dialog is a mess in the prompter.
Any thoughts on how to get this working?
Thanks,
Paul

If you want to export just the dialogs from the story, you can try out Breakdown Reports (Authoring view : Production - > Breakdown Reports). You can try "Character..." or "Custom Report..." to see if it serves your purpose. It will generate csv file for you.
Thanks

Similar Messages

  • Exporting from FCP for use with PC

    Hey all,
    Trying to deliver a high-med quality 8 minute video from FCP for use with a PC. I've tried exporting both a .mov and .avi using DVCPro50, but neither are readable through the PC. Best I can get is sometimes audio will show up. Does anyone have a good solution for exporting from FCP for use with a PC?
    Thanks again for your help!

    I don't think DVCpro50 codec is available on a PC. I think panasonic has a special license with apple only, so you need to try a different codec for the avi.

  • Bluetooth Microphone Only, for use with wired headphones - possible?

    Hi all,
    Is there such a device as a bluetooth microphone, and could i connect it to the iphone for voice, with the audio being routed through my wired headphones?
    I would like to continue using my audiophile headphones, but want to avoid a wired iphone mic adaptor, as the extra cabling would be annoying to say the least.
    Cheers
    J

    I had an iphone 1G adapter for audio that when connected it only served audio to the headphones and the inside iphone microphone was still working and receiving my voice without the need for an externatl microphone.
    The adapter broke so I bought a new one and I updated to firmware 2.0 (from 1.1.4) the same time. The new adapter did not do the same thing, but I cannot decide if this is because of the firmware upgrade or the different new adapter.
    Hope it helps.
    I also want to plug headphones and use the in-built mic.
    If anybody knows the way please tell.

  • Is the component uiscrollbar for use with text fields only

    Is the component uiscrollbar for use with text fields only?

    Yeah, it isn't in the library, you need to call it up using code.  It is documented in the help files though, so that should help you get it into use.

  • How do I export v-card formatted files for use with either Numbers or Excel?

    How do I export v-card formatted files for use with either Numbers or Excel?

    Did you open Automator and just look around?
    Actions are listed in the left pane.
    You drag them into the workflow on the right in the order you need to process the items that you want.
    If this is a on-off requirement, just make a Workflow. If you plan to use it often, make it an Application.
    If you want to select the contacts you want to export, use a get Selected action. You'd then select the contacts in Contacts App before running the workflow.
    I'm not on a Mac to take screenshots, so you'll have to look at Automator's help or google for more info.

  • Saving Settings for use with Export using Quicktime Conversion

    Dear All,
    Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
    All the best, Sean

    Well, you can create a droplet from Compressor that would do what you'd like...
    Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
    Jerry

  • I am traveling to Italy from U.S. and bought American Tourister Worldwide Adaptor Plug for my iPhone 5 andiPad 2. The instructions saying is not for use with grounded plugs and can only be connected with non-grounding circuits. Will this adaptor work?

    I am traveling to Italy and bought an American Tourister Worldwide Adaptor a plug for my iPhone 5 and iPad 2. The instructions say it is not for grounding use and not for use with grounded plugs. Will this work?

    That adaptor should work.

  • How tune flash player 9 for use with proxy

    I use me browser with proxy. But flash player, when i show
    yourtube etc, use direct connection and not use proxy server. How
    tune flash player (last fersion, 9) for use with proxy. I want what
    all traffic go over proxy

    Will alienate? They've already alienated users a long time
    ago. That isn't the point, though, because it doesn't matter if
    users are alienated, it only matters if the users need flash.
    The only thing that could make flash player better is open
    source. I don't see why they don't do it. They make money on the
    authoring tool, not the player. All of my Linux machines are ppc
    and x86_64, no flash there. I also don't have flash on my PDA, a
    Palm T|X. If the player was open sourced, people would stop
    complaining about how much flash sucks -- because, right now, there
    are very serious, legitimate, complaints against it.
    Anyway, for now I'm hoping that SVG matures quickly.
    Although, I"m sure that once Adobe sees that train coming, they
    will extend Flash (dev.) to export SVG movies containing embedded
    binary data that can only play with their binary plugin.

  • This driver is locked for use with embedded applications - SQL Server

    Hello guys,
    Background:
    I developed an application using JSC2 with MS SQL Server 2000 as the database and Sun Application Server PE 8 as App Server. During development, I am able to deploy and test it. But as soon as I've installed Sun Application Server PE 8 on our Production Server, exported my app there and tried to execute it, I get the error
    "This driver is locked for use with embedded applications".
    I just wanna ask, though I've seen other threads saying that the only solution is to buy the EE or SE of Sun App Server, isn't there really any work-around with this?
    Thanks very much for your help.

    OK, that is the same setup we have (Creator built application running with MS SQL Server).
    I wrote a tutorial talking about integrating Creator with Spring. In it you will find out how to use SQL Server with a Creator built app running on the Platform Edition. That tutorial can be found here: http://swforum.sun.com/jive/thread.jspa?threadID=52657&tstart=15
    In short, look to jTds.
    Hope this helps.

  • Does an upgrade to ilife 11 contain idvd for use with mountain lion (10.8.5)?

    Does an upgrade to ilife 11 contain iDVD for use with mountain lion (10.8.5)?  I received an advertisement about upgrading to iLife 11 and it discusses sharing via iDVD, which was disabled when I upgraded to Mountain Lion OS 10.8.5.  Would purchasing the iLife 11 download restore the functionality of iDVD, or is this just another way to get the sheep to upgrade iMovie with no way to export to iDVD or equivalent.  Why is there no Apple warning that Mountain Lion disables and does not support iDVD?  I used to think Microsoft was a trickster, but I'm of the opinion that Apple meets or exceeds their slippery machinations.  Am I just stuck with purchasing a 3rd party software to replace iDVD?

    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailier like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    I am using an expense tracker and when I export the file for use it says it is in location /var/mobile/applications/666E-4BC6-8FF1-50CAD35FA541/documents/MyExpenses.csv where do I find this? Assistance greatly appreciated

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows.  The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

    I cannot make these directions work
    I downloaded media on Overdrive MEdia on my PC
    I have the overdrive media ap on my I pod touch 4g
    this media is suppossed to be compatible w/I pd touch
    Notes on Transferring OverDrive MP3 Audiobooks…
    Most MP3 capable devices should play OverDrive MP3 Audiobooks.
    If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
    iTunes® v9.0.2 (or newer) is required.
    The Apple device must be formatted for use with Microsoft® Windows®.
    The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
    Connect the iPod® to your computer.
    If it does not launch automatically, open iTunes v9.0.2 (or newer).
    In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
    The 'Summary' screen is displayed. 
    Place a checkmark next to 'Manually manage music…'.
    Click the 'Apply' button.
    The iTunes 'Summary' screen refreshes, and the changes are saved.
    If desired, close iTunes.
    Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    Also you said " I want to add them to my iCloud, and also back to my computer.   " Note that unless  subscribe to iTunes match, only iTunes purchases are stored in iCloud.
    Also,
    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • GroupLayout can only be used with one Container at a time

    Dear all,
    I am a beginner so please don't throw rocks at me...
    I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
    Here is the code of the button from the main frame to start the second one:
    private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {                                                
            // TODO add your handling code here:
            CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
            custGUI1.setVisible(true);
    }When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
    How should I handle this?
    What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
    Thank you
    With respect,
    Don
    Edited by: don1983p on Dec 16, 2008 2:21 AM

    AndrewThompson64 wrote:
    There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

  • Can i buy an iPhone at a pawn shop and get it unlocked for use with Straight Talk wireless?

    Just wondering if I can buy a used iphone at a pawn shop or on ebay and get it unlocked for use with the prepaid Straight Talk wireless service? If so, how much would it cost to get it unlocked?

    PHones can only be unlocked from the carrier; if you're looking for an unlocked device I'd recommand buying it directly from Apple as that is the only way to promise it is, if you buy it second hand you may find it is locked to a carrier who doesn't support unlocking, or worst yet activation lock

  • Best drum loops for use with Logic? Ease of use, usability, etc.

    Hi,
    I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
    I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
    Thanks

    try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

Maybe you are looking for