Export each chapter as one H.264 file
Hi friends
I´ve made a project in Adobe Premiere Pro CS5.5 (using Windows 7 Ultimate 64 bits). The length of the project is about 2 hours.
I´ve already divided the timeline into 20 chapters (in order to use in Encore when creating the DVD or Blu-Ray).
Now I´d like to publish a copy of this project to Youtube. But 2 hours is too length for one video. I thought I could separate the project into it´s 20 chapters. So I upload to youtube 20 files...the chapters.
My question is: Is there any way to order Adobe Premiere to export each chapter as one H.264 file suitable for Youtube (using the Youtube Widescreen HD preset)?
What´s the best way to do it?
Thank you for the help
Best Regards
Gustavo.
Gustavo,
There are three ways that a Reply gets the Correct, and Helpful answers, and two are almost the same.
The OP can make those assignments, so long as they had originally marked their post as a question. This can be done at any time, and is greatly encouraged, as it help the Adobe Forum Team. See this article: http://forums.adobe.com/thread/1058744?tstart=30 Also, there is the often overlooked "Was this helpful? Yes No," that helps in gathering data. I do not think that those contribute to a poster's "points," but do help the Adobe Forum Team determine how well the forums are working. Anyone can mark those, and I encourage anyone, coming to a thread, to take a moment, and do that, especially if a Reply helped them too. Those can be marked, regardless of the Correct, or Helpful marks, and go into a slightly different database.
A MOD, with MOD privileges in that particular Forum, can mark Replies. Also, one might have MOD privileges in one Forum, but not others.
An Adobe Administrator, with full privileges can mark Replies.
Usually a MOD will not do that marking, while a thread is active, but perhaps with the push to get data for the Adobe Forum Team, a MOD, knowing that the answers were correct, did the marking? That is but a guess.
Good luck,
Hunt
Similar Messages
-
[Forum FAQ] How do I export each group data to separated Excel files in Reporting Services?
Introduction
There is a scenario that a report grouped by one field for some reasons, then the users want to export each group data to separated Excel files. By default, we can directly export only one file at a time on report server. Is there a way that we can split
the report based on the group, then export each report to Excel file?
Solution
To achieve this requirement, we can add a parameter with the group values to filter the report based on the group, then create a data-driven subscription for the report which get File name and parameter from the group values.
In the report, create a parameter named Name which use the Name field as Available Values (supposing the group grouped on Name field).
Add a filter as below in the corresponding tablix:
Expression: [Name]
Operator: =
Value: [@Name]
Deploy the report. Then create a data-driven subscription with Windows File Share delivery extension for the report in Report Manager.
During the data-driven subscription, in the step 3, specify a query that returns the Name field with the values as the group in the report.
In the step 4 (Specify delivery extension settings for Report Server FileShare), below “File name”option, select “Get the value from the database”, then select Name field.
Below ‘Render Format’ option, select Excel as the static value.
In the step 5, we can configure parameter Name “Get the value from the database”, then select Name field.
Then specify the subscription execute only one time.
References:
Create a Data-Driven Subscription
Windows File Share Delivery in Reporting Services
Applies to
Reporting Services 2005
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh -
Can I convert each playlist into one single mp3 file
I have had great success creating and burning a playlist to a CD however I'd really prefer to save an ENTIRE playlist of about 20 songs as a SINGLE MP3 file. I can then I burn each file (composed of songs in a playlist) to a CD and have a nice set of organized music set/PLAYLISTS to listen to. I stated my question in this manner because I've seen many similar questions but they are not what I am asking. I am using WIndows 7
What I have tried:
1.) ...selecting the group of songs within the playlist and exporting as an MU3. My results: It created an MU3 file that played for less than 1 second when played in anything other than itunes. In itunes it opened as the same playist I began with
2.) ...consolidating the files (the goal was to consolidate into one MP3 file) but once I selected the consolidate option I could not find that file under itunes Media which is the location where itunes says it would be stored.
3.) ..converting to MP3 Result: It just converted each individual file to MP3 format and NOT the entire list as a SINGLE MP3 file.
Does anyone know if there is a way to accomplish this?
Thanks in advance
DSorry to disappoint you, Chris... but I don't "take their product". Someone WHO WORKS FOR THEM "gives it to me". There's a MAJOR DIFFERENCE between someone handing you something that's theirs to hand you... and stealing it.
In 2006 I saw Sara Evans "perform" in Tucson. She flew on her congressional (then) husband's private plane from Portland to Orange County, refueled and flew to Tucson, where she got into a limo, and rode to the show. She got out of the limo, went straight backstage, I saw someone hand her a Dr. Pepper, which she opened, took a sip out of, and then went out on the stage as the headline act for the evening. She sang six (6) songs in twenty-three (23) minutes, walked offstage, did no encore, and got back in the limo, which whisked her back to the waiting jet to fly home.
The station manager of the radio station that sponsored the concert, later told me that she was paid $125,000 for that twenty-three minutes. Even he felt like the station didn't get their money's worth. The promoter paid for the jet fuel and her pilots' salaries.
In 2009, I went out to Phil Vassar's "motor coach" after a show, which is basically a house on wheels. He showed two friends and I the "studio" in the middle of this converted bus, where he can record new tracks and send them straight to the record company via satelite, for their final editing. The front has a full kitchen & living room and a 50" flat screen TV with a massive audio system. HE owns the whole thing, and when he doesn't feel like riding, he has a private plane of his own that will pick him up wherever they can land and fly him to the next show. His promo guy gave each of us a copy of every CD he's ever released before we left.
I have no problem with people making money for their work. But I've seen just how much is given away in the music industry, and I'm not going to refuse things offered to me because someone with a private jet and limo, getting $6000 a minute, or with a half million dollar "rolling house" isn't getting paid for the things their own people are handing out in bulk. -
Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.
Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara -
Exporting multiple clips from one sequence as separate files.
Hello fellow editors!
I have about 100+ video files that I want to cut into shorter clips, edit a bit and then export in a Final Cut friendly format (currently they are AVCHD mts files) to send it to my friend, who is putting the whole movie together.
I dont want to use Final Cut for this ( I cannot, I have a windows machine) and I was hoping to work with premier CC and media encoder CC.
There is a way of putting all clips in one sequence and then nesting each one, then you can send them to Encoder CC and it will render them as separate files - thats is just not very productive, nesting clips one by one and it takes forever for Encoder to import sequences.
I was wondering if there is a better workflow? I heard that Final Cut has shortcuts to do this very easily, you just click on all those clips in sequence and "batch export" them, which puts them in some place as separate, already cut files.?
Anything? I love premier, let my feelings be justified!)Kevin Monahan ...
Lucid George is right ... select one trimmed clip, File->Export->Media, you can choose whether in-out or entire clip.
Select MORE than one clip, you get a completely different export box ...
These two selections were "exported" from that bin created by dragging the trimmed clips from the timeline to a new bin ... I don't know what else one is supposed to do. You can't even select multiples clips and batch sub-clipping, which would at least cut the steps down.
Neil -
I have 45:59 mins lecture and one picture, can't export to QT with one file
I have a lecture of a duration of 45:59 mins. and one slide (picture). I have created a slide show in Keynote (v. 5) and wanted to export to QT for YouTube uploading. I end up having two files! and when I upload to YouTube, it fails for not being the right kind of file, while it (they) is .mov!!! Any suggestions?
thanks,
WindsorProHello Gary:
I was hoping you would answer, I wanted to reply to your earlier comment on how to create something similar to mine. You said, "Start a new presentation to remove the previous sound recording, Keynote is holding onto the other sound files. Add the graphic items to each slide and one sound file to each slide for the voice over 1 - In Inspector > Transitions; use start transitions automatically and set each transitions delay to the duration of the individual sound file. 2 - In QT export, set Fixed Timing and delete the value in the duration box, QT will then use the custom timings for each individual slide. This procedure does work exactly as needed, Iv used this for nearly 6 years using 4 different versions of Keynote."
I tried the above and didn't work, because there are two duration boxes and Keynote won't let me delete the value!
Also, I tried your new suggestion, send to > YouTube, and still, failed. I think because Keynote is creating two files, both with .mov suffixes. But the one that has the slide on it (when it is not activated) is empty! with 00:00 duration (when I press cmd-i) and the other has a movie strip logo, and it is the audio file, however, without the slide! And YouTube rejects them as not being one of its acceptable formats! (Even though both have .mov at the end).
Finally, I bumped into a YouTube presentation, and found out how easy it was, you wouldn't believe it!!!
Just drag the sound file onto the one slide in Keynote ( I have just one picture in this project ) and then export to QuickTime! It's real-time conversion, so, it took 45:59 mins. to finish it, of course I went to bed and in the morning it was done. Once it was done, I uploaded it to YouTube by just dragging the file onto the designated area. It took another 81 mins.! -
All my paragraph styles seem to jive, and no matter what I do, most of my chapters seem to miss their page breaks. I've heard of others having this issue with older versions of Indesign, but I'm on CC2014, and I thought that should be fixed by now. I really don't want to have to learn HTML code and go break open the epub doc to fix it manually, because that doesn't always work across all devices either. I know others have to of run into this problem before. What am I doing wrong?
Make sure the paragraph style applied to the chapter title (if that's the first line of each chapter) is tagged. Open the paragraph style and go to Export Tagging and check Split Document (epub only). Then when you export (assuming you are using reflowable) under General>Split Document check Based on Paragraph Style Export Tags. Try it and let us know if this helps.
-
I have been searching high and low for this one. I have a vbscript that can successfully perform the function if one file is listed. It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
that way. However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder. At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
was executed and folder was scanned. So I am going back to the drawing board and starting from the beginning.
I also have a txt file that contains the list of string text entries I would like it to search for. Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back. The current script
I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand. It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
let it search. There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for. It is a search (read) only function, going thru the entire contents of the folder and
when done, performs the loop function and onto the next file to repeat the process until all files are searched. When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
of the overall script. Saving yet another step for me to do.
My current script is set to append to the same results file and will echo [name of file I am searching]: No errors found. Otherwise, the
output shows the filename and the string text that matched. Because the results append to it, I can only run the script against each file separately or create individual output names. I would rather not do that if I could include it all in one.
This would also free me from babysitting it and running each file script separately upon the other's completion. I can continue with my job and come back later and view the completed report all in one. So
if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence). I don't want the entire line to be listed
where the error was, just the match itself.
Example: (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line. It somehow posted the example jumbled when I listed it)
File1.txt Line 54
Job terminated unexpectedly
File1.txt Line 58 Process not completed
File1.txt
Line 101 User input not provided
File1.txt
Line 105 Process not completed
File2.txt
No errors found
File3.txt
Line 35 No tape media found
File3.txt
Line 156 Bad surface media
File3.txt Line 188
Process terminated
Those are just random fake examples for this post.
This allows me to perform analysis on a set of files for various projects I am doing. Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on. Therefore, the
line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using. Very useful.
If you know how I can successfully achieve this in one script, please share. I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
Thanks for helping.I'm sorry. I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing help with. I did have one created, but I came across one that seemed more organized than what I originally created. Later
on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly. Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
However, I could still use help on it. I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error. If I end with End, then it still gives same
results.
So to give credit where I located this:
http://vbscriptwmi.uw.hu/ch12lev1sec7.html
I then adjusted it for what I was doing.
What this does does is it searches thru log files in a directory you specify when prompted. It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file: errors.log
Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched. That way, I can go directly
to each instance for particular events if further analysis is needed later on.
So I could use help on what statement should I be closing this with. What event, events or error did I overlook that I keep getting prompted for that. Any help would be appreciated.
Option Explicit
'Prompt user for the log file they want to search
Dim varLogPath
varLogPath = InputBox("Enter the complete path of the logs folder.")
'Create filesystem object
Dim oFSO
Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
'Creates the output file that will contain errors found during search
Dim oTSOut
Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
'Loop through each file in the folder
Dim oFile, varFoundNone
VarFoundNone = True
For Each oFile In oFSO.GetFolder(varLogPath).Files
'Verifies files scanned are log files
If LCase(Right(oFile.Name,3)) = "log" Then
'Open the log file
Dim oTS
oTS = oFSO.OpenTextFile(oFile.Path)
'Sets the file log that contains error list to look for
Dim oFile2
Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
'Begin reading each line of the textstream
Dim varLine
Do Until oTS.AtEndOfStream
varLine = oTS.ReadLine
Set objRegEx = CreateObject("VBScript.RegExp")
objRegEx.Global = True
Dim colMatches, strName, strText
Do Until oErrors.AtEndOfStream
strName = oFile2.ReadLine
objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
Set colMatches = objRegEx.Execute(varLine)
If colMatches.Count > 0 Then
For Each strMatch in colMatches
strText = strText & strMatch.Value
WScript.Echo "Errors found."
oTSOut.WriteLine oFile.Name, varLine.Line, varLine
VarFoundNone = False
Next
End If
Loop
oTS.Close
oFile2.Close
oTSOut.Close
Exit Do
If VarFoundNone = True Then
WScript.Echo "No errors found."
Else
WScript.Echo "Errors found. Check logfile for more info."
End If
End if -
I also have a .csv file with the name of a jpeg in one column and a text description of each jpeg in a second column. Is there a way to automatically insert one jpeg (photo) and its corresponding text, each pair on one page, into a Indesign document?
I would also recommend to write the description into the meta data. This would allow to place a text frame above the image and it is possible to add meta information and file name automatically together with the image, when you place it or even in a prepared template.
Meta data information can be written easily in Bridge in the Meta File Workspace. -
I have a huge file which is in GB and I want to split the video into clip and export each clip individually. Can you please help me how to split and export the videos to computer? It will be of great help!!
video
What version of Premiere Elements do you have and on what computer operating system is it running?
Please review the following workflow.
ATR Premiere Elements Troubleshooting: PE11: Project Assets Organization for Scene and Highlight Grabs from Collection o…
But please also determine if your project goal is supported by
a. format of your source
and
b. computer resources
More later based on details that you will post.
ATR -
Illustrated book exported as epub shows the number "4" (1 each chapter) for 56 pages
I'm using ID 5.0 and have an illustrated children's book with each page consisting of a jpg file. I've converted it to epub (to eventually also convert to MOBI) and everything looks great except for a pesky problem.
When I proof the book in Adobe Digital Editions, everything looks great - I see the chapter names on the left side of the ADE browser (yay), and can scroll through each page fine, but only see at the top the number 4, (next to the printer icon on the top of the ADE page). I have 4 chapters, yes, but I have something like 56 pages total within all of these chapters. Since this is a kid's book that's somewhat educational, I think it might prove to be confusing that there are only 4 pages acknowledged.
I don't need to see page numbers on the actual document (did that already in Photoshop and it's part of the overall jpg file) but is there a way to change the top number that ADE sees so that it acknowledges that there are 56 pages? Or even 5 pages in chapter 1, 22 pages in chapter 2, and so on?
Thanks in advance.ADE is hardly the app to be doing this with but if you are, make sure you’re using 1.8 preview and not the release version.
Bob -
When ever I try to export to Perfect Effects 8 a DNG Photo this is the Error message "Unable to complete the export. One or more files could not be found" Any one know how to fix this?@
Adobe web chat come up with a solution.
Open the PP project.
Export your sequence or project as a Final Cut Pro XML file.
Set up a new PP project.
Import the Final Cut Pro XML file.
This will get you back up an running.
Since getting back to editing this project I have found that some things will be lost or change in using XML:
You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
You will keep cut points, crop fx.
Not perfect but only took a couple of hours to save 3 days work. -
FLV import Problem / .264 files slow
Hey,
for my work I have to use hours of .flv files daily. These are VODs from Twitch which I have to edit. Being stream related content these files often get "corrupted" because of internet connection/Twitch problems. In the .flv files this is not really a problem - most of the time you see a brief stutter but everything else is fine. Now I obviously can not import .flv files into Premiere Pro CC so I used FLV Extract to export a .aac and .264 file from the FLV container. These files import just fine into Premiere Pro but the main problem here is that when working with a .264 file the previews render VERY slow and often red frames appear. Also when exporting a file it takes MUCH time and barely uses my CPU at all (tested with other files and formats and they worked just fine).
It is also interesting to note that the .aac and .264 files have different lengths and thus get out of sync. How much depends on the source .flv file (most likely how much it got corrupted due to various reasons?)
My PC specs are 32 GB RAM, GeForce GTX760 Video Card, I7-4790 CPU & 3 7200 RPM HDDs
Media Info
Original .flv file
General
Complete name : E:\Projects\0.flv
Format : Flash Video
File size : 237 MiB
Duration : 30mn 1s
Overall bit rate : 1 101 Kbps
Tagged date : UTC 2014-06-10 20:38:05
Tagging application : flvmeta 1.1-r213
Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : 7
Duration : 30mn 1s
Bit rate : 941 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.015
Stream size : 208 MiB (88%)
Audio
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 10
Duration : 30mn 1s
Bit rate : 125 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Delay relative to video : 24ms
Stream size : 28.4 MiB (12%)
.264 file
General
Complete name : E:\Projects\0.264
Format : AVC
Format/Info : Advanced Video Codec
File size : 207 MiB
Video
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Now my first question would be: why has Premiere Pro such difficulties when working with these .264 files? Do I lack any codecs? Are some settings in Premiere Pro wrong? Is there any workaround or solution? As long as Premiere Pro works fine with these files I wouldn't mind them being out of sync since I can fix that manually.
I also tried using FFMPEG to change the container from .flv to .mp4 which worked and resulted in me being able to import the files into Premiere Pro but even though the video and audio track had the same length this time - they were still out of sync and much more difficult to re-sync them if at all possible so this didn't help much. I also tried video converter programs to convert to other file formats but the out of sync problem still carried over.
So as an alternative question: is there any way to convert the original .flv files properly so I am able to import and work with them? Meaning they are still in sync and keep the original quality.
The solutions should be as efficient as possible (quick) since I have to go through hours of content every day.
I am very grateful to anyone trying to help. It is VERY much appreciated. Thanks.
(for a test file you can download a flv file using www.twitchtools.com with the video link http://www.twitch.tv/trumpsc/b/537543702 - a corrupted part that ALWAYS speeds up is in the first few minutes (if you download part 7) when he opens the arena rewards when the key comes down)I very much appreciate the help. Sorry for any lack of clarity or apparent density on my part. Up late last night.
I have a single internal drive formatted "Mac OS Extended (journaled)". It is a 160GB drive with 20GB free.
I have two maxtor FW 400 160GB drives. Each with about 80GB free. One plugged into the back of the computer, one into the front. Not daisy chained.
I have a P2 Store which connects via USB 2, and the HVX which I connect to the FW 800 port on the back of the computer.
Like I said, I've tried every conceivable combination of these devices. I've imported directly from the camera via FW to the internal drive using FCP. I've gone from the camera directly to both of the FW drives using FCP. I've also transferred from the camera, to the internal drive, then imported using FCP from the internal to the FW drive set as my scratch disc. And so forth.
But no matter what the permutation, I get the same result. And again, it doesn't seem to be an issue of moving these blocks of data around. That seems to happen just fine as far as I can tell. If I start the import, then watch the clips being created in the capture folder, they agregate just fine. It's only once they've reached their full data size (in ref'c to the original mxf files) that the import process hangs. The larger the clips, the longer the hangs (though fewer in number, obviously).
I deleted the FCP preferences and repaired permissions on my internal HDD with no alteration of the problem.
The only other observation I've had, is that when the hangups happen, and the little ball starts spinning, I also hear a high pitched whining from inside the computer case. It does not sound like usual HDD work.
Hope that I've given a better sense of the situation. Thanks for bearing with me
GPL
PowerMac G5 Dual 2Ghz Mac OS X (10.3.9) 2.5 GB RAM -
Large H.264 files causing freeze when placed on Timeline
This is in reference to Encore CS5.1 that came in my CS5.5 production suite.
I have BD project that I am using x264 output files for. I have three timelines. One is 1 minute long (some credits), another is about 5.5 minutes long and the main timeline is about 94 minutes long. I use the same settings for all three .264 files. When I open and import the files into Encore it takes notable time to index the files, but does read them all in. I can play each .264 file in the preview window above the asset tray. I have timelines working and playing for the 1 minute piece and also the 5.5 minute piece. When I create a timeline for the long piece, I place my AC3 file on it, no problem. When I try to place the large .264 asset into it, I get a cycle of CPU and RAM usage that seems to run about 20-30 seconds with one thread of the CPU very active and the RAM usage climbs about 1.5GB. So, I am not sure how to finish this project up. I have been at it for a few days trying to get this to place into a timeline.
Details:
Machine : Win7 with all updates, i& 3960X Hexacore (12-thread capable), 64GB RAM, Video workspace drive 8TB RAID10 G-Speed esPro via ATTO R680 miniSAS raid controller. Matrox MX02 LE external via PCIe card (not really used in this contect) Machine is dedicated to video/audio work. Primarily have Adobe CS5.5 Creative - Production Premium on it. I also have TMPGENc Video Mastering Works 5.
File details: Using THMGENc VMW5, I have access to CUDA supported encoding as VBR 1-pass, or they implement the x264 engine with BluRay certified wrapper settings. I have tried using VBR 1-pass output via CUDA encode, x264 output set as 2-pass VBR and also CBR. The encode rate is set to 23000 with a max at 29500 for the VBR modes. The files are coming about about 16.5GB-17GB. The GOP is set to 30, and I have tried both open and closed GOP. The material is 1080i 29.97fps NTSC.
I could try the Mainconcept based AME compression, but I have never wanted to wait THAT long. The x264 runs about 4 hours on my machine, and the CUDA based compression runs about 30 minutes (faster than my Matrox MXO2 !!).
I have used this same setup (both VBR 1-pass with CUDA and also VBR 2-pass with x264) on numerous projects, but they all seem to be no larger than about 30 minutes per piece.
This long piece is a graduation ceremony and there really isn't a very good place to cut the timeline into sections. I would prefer to figure out what the problem is and fix it rather than dance around it.
Is this a known issue with Encore CS5.1? Is there any workaround or changes I can make to get this done in one piece? Or should I just give in and make it multiple 30 minute pieces?I found a work around that I am surprised worked. In place of my normally used pre-encoded H.264 file, I imported the 850GB 10-bit AVI file and used that on the timeline with the pre-encoded AC3 file. It was much snappier and I was able to place proper chapter marks as such. When I was ready to build the output folder, I selected the AVI asset and right clicked to "Locate Transcoded File". I selected my original 2-pass VBR x264 derived file that I had been trying to import and use. Encore went off and looked the .264 file over and came back as happy. So, I built the output folder and it did not attempt to transcode anything and the resulting BluRay works just fine on my standalone player.
I really think this is not a "solution", but rather a work around. What seemed to be happening in the process viewer was Encore (obviously a 32-bit application) was settled with a memory charge at about 1GB. As it was doing it's thing, about every 20-seconds, for about 20-seconds, the memory charge would climb from 1GB up to about 3.1GB or 3.2GB and then the NT Kernel would pop up as active and then the memory charge for Encore would be back to 1GB again and no CPU activity for a 20-second cycle. It would just keep doing this. I watched this happen for a few hours before killing it. The CPU loading each time it was active was a full 1-threads worth. So, perhaps there is something in my Win7 x64 environment causing a problem, but I have tons of RAM and hard drive space and my processor is no slouch.
Just why Encore was happier with the massive uncompressed file than the compressed on is beyond me. I mean, placing 850GB on the timeline took just a handful of seconds. -
Adding H.264 Files into DVD-ROM Folder
So here is the problem:
I have 10 hours of footage and I want it all on one DL-DVD that will only be used in Dell/IBM laptops with QT installed.
Here is where I am at:
I converted footage into 10 one hour H.264 files, and I plan to use DVDSP4 to create a DVD-ROM folder.
Here is the question:
Is there any way to create a menu that will allow me to create chapter markers to open each file when clicked? I read about DVD@ccess, but this does not seem the way to go for PC users. And if there is no way to do it, should I just use Toast and make a data DVD? (not sure if DVDSP4 will do this). Seems silly to make a Menu to Just tell everyone to go back to the DVD drive and look in the folder for the chapter files.
Thanks for any insight,
DonBut i guess that's not exactly a topic for this forum. < </div>
It's not the topic is inappropriate, it's just not a direct function of DVDSP and, as you might guess, folks like me have neither experience nor patience with PC applications. That it can be done at all without using something like HTML amazes me. Thanks for the heads up on this technique, Chris, hopefully the OP will research it on his own.
bogiesan
Maybe you are looking for
-
We have deployed our ADF application in production. We developed using JDeveloper Version 11.1.2.1.0. In a page fragment, there is a inputComboboxListOfValues which is binded to a list of values binding. This list of values binding is mapped to an at
-
Issues with flickering iPod Touch and latest update (5.0)?
I recently updated my iPod Touch 3G to 5.0. Since updating, the iPod will shut off at will, sometimes flickering, sometimes going straight to the "slide to shut down" screen. Sometimes it will shut down in the middle of an app, I'll start it back u
-
Hello,guys: I am a green hand in EJB.and Now I'm using elipse+lomboz developing the project ,and the server is JBoss.today I got an Exception in delpoying a cmp.the information is below: org.jboss.deployment.DeploymentException: Error while creating
-
Hi Adobe people, Since I updated to Windows 8.1 can not open any videos in my AOL browser. (9.6 Desktop) Everything works fine, except anything that has to do with videos. They work fine in my XP computer. They worked fine in Windows 8. I copied a v
-
XMP Sidecar problems with remove and copy
Perhaps it should be documented that File.remove() does not delete the corresponding .xmp file. I think it can be argued that removing the xmp is more correct than leaving the sidecar there.<br /><br />This leads to problems when subsequently renami