Export edited audio track in Final Cut Express

Does anyone know how to export an edited audio track as a mp3 without it being a video file using FCE?

Use Export>QuickTime Movie and change the export function to audio only. Take that to iTunes and use it to convert to MP3.

Similar Messages

How to add audio track to Final Cut Express

Does anyone know how to add a audio track to Final Cut Express? My default is four available tracks. What if I want to have 6? How can I add a additional two to the timeline?

Move your cursor into the gray area below the A4 audio track, then control click and select Add Track.

Joining and moving tracks in Final Cut Express

Hi,
I have a project where I am using up to four videos/photo images on the screen at one time. Obviously much of the problem is in the alignment of images as they do differ in size.
The biggest problem is that I have cut the main piece of the video into clips with gaps.
When I use garageband for podcasting there is an option to join clips together to form one track. Even if there are gaps inbetween clips. Does anyone know if this is possible in Final Cut Express? Also as I have problems in aligning overlays. Does anyone know how you can move a track in its above another in terms of it’s priority on the screen. ie. move v5 above v4 become v3. If I could do the former then this would merely be a case of copying and pasting but all my clips are separated in the tracks so it would help to be able to move the tracks.
This may be staring me in the face but I guess these things are always easy when you know them.

Thankyou both for the reply. I’l be honest and say that I was an imovie user who has picked up FCE over the last fortnight to do this project. If I did it again I’d prepare it totally different. I have nine tracks and each of them contains clips, separated by gaps and linked to audio. As there are overlays the gaps are important as I have the canvas screen split into four (each showing a different video or image. It’s all a bit tricky now but I really thought I’d be able to join up the clips as you can in imovie and garageband. I also expected to be able to move a track above another track as you can rearrange tracks in garageband even though it solves no real purpose. As track v1 shows above track v2 in the canvas it means I have a lot of fine editing to align the footage. If I did it all again I would prioritise what tracks will be most important before starting the project.
It’s been a fun but time consuming learning curve. If you know the limitations of software you can work around them whilst planning but now it would be a case of doing much of it again.

Audio transitions in Final Cut Express--Not Allowing

I'm trying to drag and drop an audio transition (specifically, Cross Fade 0dB) in between two mp3s that I imported into Final Cut Express and which currently reside on the A1 and A2 audio tracks. When I attempt to do so, I get an "X" telling me that I can't. I have rendered everything that needs to be rendered, video and audio. What else do I need to do? All honest help appreciated. Screen shot available upon request.

Okay, done...this FCE is a picky b*&ch. Hope it's worth the trouble. It's my first day playing with it, but man, what a friggin' learning curve. Not to brag, but I consider myself gifted when it comes to computers...and this thing is giving me a headache...
While I have your attention, if you don't mind me throwing in an unrelated question, my iTunes has suddenly been experiencing slowdowns. I don't mean 0.5- to 1.0-second slowdowns. I mean 5-second slowdowns where the spinning carousel keeps me from doing anything. How can I research to see if I have inadvertently installed some software that is doing this BS? It is rather irritating!!

Audio problems in Final Cut Express

I have edited 4 sequences successfully within a project. Everything was working fine audio and video. All material is saved to my external scratch disk. I left the project to take a break (saving it first of course). When I came back the audio is not working. I have not changed any settings and have tried to obvious like checking the volume on the computer. I know the audio is still there because the levels are moving and correct. I just can't hear it. This is the second or third time this is happened?
At one point I needed to capture some material and following capture it seemed to work again. Then I lost it again. I thought I would try capturing more material to see if I would have the same luck but not this time.
I am fairly new to editing and to Final Cut Express. Any help would be greatly appreciated.
Thanks

http://www.fcpbook.com/Audio2.html

Editing graphic loops in Final Cut express HD ?

Hello guys
I'm planning to purchase final cut express.
Besides the fact that I want to use FCE HD for "hobby style" video editing and also take an advantage of soundtrack pro - main reason for purchasing it is that I want to use it for editing graphic and backgrounds loops for the web .
Basically I would like to import graphic loops ( mostly from companies like "MOTION LOOPS" or DIGITAL JUICE" ) then edit them, add some titles with live type , music and then convert them to flash and post it on the web.
So my main my question is ? Does anybody has experience with editing graphic loops or backgrounds in Final cut express or should I rather get some other application for that?
I would appreciate any answers .
Thanks for your time.
Milan

One point, FCE does not come with Soundtrack Pro. Only with the original Soundtrack, now in v1.5.
In what edit them, they're movie loops, if you edit the content they won't be loops any more. If you mean edit them in size for banner ads, then FCE is can do that on export but you're going from a heavily compressed PAL(?) format to something very different. The results may not be as good as you expect. You cannot crop the size of the image in FCE because it is a fixed resolution application. You can't for instance make a 60x800 pixel shape to make a banner ad into Flash. You need a resolution independent application to do that like Final Cut Studio.

Poor quality when exporting HD project directly from Final cut Express

I am doing some HD projects in Final Cut Express HD. I filmed with the Sony HRD-HC1 in 1080i. I import into FCE using the 1080i 60 preset from Easy setup. I completed the project and it looks great from FCE full screen. I export as Quicktime (not Using Quicktime conversion), and I get a perfect looking output file using the Apple intermediate codec, 1440x1080. The problem is that the client needs to play back the video on windows machine using Quicktime. The windows Quicktime does not support the AIC apple intermediate codec, so I have to export to another format. I tried everything exporting from FCE, MP2, H.264, DivX, everyone option. They all look terrible. Blurry, especially parts that have quick motion. Really terrible. I called Apple support, no love. I then tried taking the AIC version of the file and used compressor. It took forever, but came up with am OK MP2 HD file. It still doesn't look that great, but it is way better. So, is their something broken with the FCE exports using Quicktime conversion? Anyone have similar experiences or workarounds? I don't want to use compressor as I don't have it on my Mac Book pro, I had to move it to another machine to do that.

Being that the dimentions you suggested should be widescreen, I re-ran the conversion to your parameters, this time un-checking "Preserve aspsect ratio.. as letterbox" and this time it is widescreen. Not sure why, but it was putting the black bars on the left and right, not the top and bottom, scrunching to 4:3ish with that box checked. Strange.
Anyway, the quality is the best H.264 I have seen exporting directly from FCE. It still blurs quite a bit on the fast moving video parts, my MP2 version from compressor still looks lots better. Seems like there is some problem with exporting HD from FCE. It just is not coming out sharp, like the Apple intermediate codec version you get with Export - -> Quicktime movie or if you wait for compressor to do the work rather than FCE. Does compressor use a different engine, or does it use the same QT and just take more time to do a better job in the export? Something just isn't right.

Best export method of footage from Final Cut Express to DVD?

I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

Hello
I'm not sure if this is relevant:
I've been using the Quicktime Conversion settings;
http://www.locationstudio.net/Settings.jpg
29.97 Frame Rate
Highest Quality
NTSC/PRO
I was under the impression that this was usually best - haven't had any problems with iDVD
Mike

Best export for dvd quality using final cut express hd?

hey guys
i have final cut express hd...what would be the best export settings to get nice highquality dvd?
i am going to put about 25, short 5 minute clips in the dvd..will it be able to fit and all be a nice quality?
any suggestions?
thankyou!

Yes, provided you use dual layer DVD-R and your burner supports this newer media.
Otherwise the most you can burn to DVD-R SL media is 120 mins. (but keep in mind menus, titles, photos, etc all consume space as well thereby reducing the available amount of run time / QT Playback.

Exporting from a quicktime from Final Cut Express HD

Can anyone tell me the best settings to export a Quicktime from Final Cut Express HD maintaining the best quality but getting the file size as small as possible?

It depends on what you want to export to/for. iDVD, streaming web ... what's your target use?

Exporting Animated Map Graphics To Final Cut Express HD

Is it possible to create an animated map graphic in IMovie, export it as a quicktime file, then import it into a final cut express HD project and insert it into the timeline?
Thanks,
Jim

I don't have any experience with FCex, but I should think that the simplest solution would be to export the song to iTunes and then import the AIFF file that GB created into FCex.

Exporting a slide shoe to Final Cute Express HD

Is there a way to take a finished slide show and export it to Final Cut Express HD?

See if these pages help you
http://www.fcpbook.com/Photoshop1.html

Need help with editing AVCHD files in Final Cut Express 4

The AVCHD files were recorded on a Canon HG10 before I bought a Mac Pro OS X 15.1.
I transfered them to a file on my desktop, like the instructions tell me to do, but when I get to the part of "mount the media files in the log and transfer", I get stuck.
The file is named AVCHD and when I try to upload it into the Log and Transfer window through the little plus sign on the left hand top corner, I get the following message:
"AVCHD" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
It does not allow me to import the files individually. I tried dragging the files to where it says "Drag media here" and nothing happens. If I try to drag the file to the area in the top left corner of log and transfer, I get the same message as above.
What do I need to do?

I have a different camcorder, but my experience might be of help to you.
I have a Sony HDR-UX1 AVCHD camcorder that records to 8cm DVDs.
I tried using Apple Final Cut Express 4's FILE > LOG AND TRANSFER command to capture directly from the 8cm DVD, which resided in an external Sony DVD drive... and I was not successful.
Then, I remembered my experience on Windows XP where I used Corel's Ulead VideoStudio 11 Plus.
With Ulead VideoStudio 11 Plus, I found I had to drag the contents of removable media discs and disks to my Windows desktop, which then allowed me to use the software video capture tools successfully.
So I tried the same thing with Apple Final Cut Express 4.
I dragged the BDMV FOLDER on my 8cm AVCHD disc to my Mac's desktop.
I then used the FILE > LOG AND TRANSFER command and simply browsed to the folder on the desktop and -- Voila! -- the contents of the folder appeared as video thumbnails in the LOG AND TRANSFER WINDOW and everything worked.
Hope this helps,
Private Idaho

Audio Problems with Final Cut Express

I exported a video to wmv format and when I play it back I have a problem with the audio at the end. At the end the sound seems to go into a loop and the the last words are repeated 3 times with a static sound. It plays fine on my MAC the problem only happens on a PC. The audio file was imported as a wma.

FCE does not export WMV without third party support. You should contact whoever produced the WMV export module.

Audio tracks in final cut X

I'm considering buying the new FCP X to our company, but I'm curious about the new changes, for instance, what happend to the patch panel? Can I record audio in one track (i.e. track 1) and assign it to another one (i.e. track 2)?

pedromvieira wrote:
True! But if they ever do, is there any place in the software that allows me to place lets's say, voice in channel 1 and ambience on 2?
Thanks for your help and patience!
Pedro
Hey Pedro
Yes of course. You can use the Pan controls to create the track separation you need. Just go to Audio tab (in the Inspector window) and set the clip's Pan Mode to Stereo ... then you can use the pan control to pan your VO to left and your ambience to right.
Cheers
Andy

Export edited audio track in Final Cut Express

Similar Messages

Maybe you are looking for