Export embedded audio Edit - bring back into Cp?

I have acquired another person's project that had recording
embedded in the project (all narration done in Capitvate). The
levels were all over the place, so I exported the audio files, did
post-processing, now I want to bring them back into Captivate and
overwrite the existing files. Any way to do this other than import
by slide (like some sort of import and file replace)?

Trevor,
The quickest solution I know is to import the audio into the
library (be sure to delete the old stuff first--just to be tidy).
Then drag the audio from the library to each slide.
Probably not the "import" you'd hoped for, but it's pretty
speedy.

Similar Messages

IMovie '11: how to move edited clips back into the event library?

I made a green screen video that is supposed to be the foreground, and edited out the ums and ahs. Now I need to add a green screen background, which apparently I cannot do after already inserting the green screen foreground footage. (I would LOVE to be able to do that, but apparently you cannot.) I have tried to drag the edited videos back into the event library, but they bounce back out, and I have checked all of the menus twice and there is no command to export to event library. Help! I need to insert a background and don't have another hour to re-edit from scratch.

Hi
No - there are no easy and straight forward way to do this - BUT
You must do as one does in iMoivie when there is a need to combine several functions.
Export out (the manipulated clip) as a full quality QuickTime movie (just this part)
Then import this as a new Event
Put this into a new project (if several effects is to be applied) or into Main movie if You only need to apply one more thing as a GreenScreen.
For several effects - one might need to Export/Import several times. Much easier in FinalCut Pro.
Yours Bengt W

Export - No audio after 1 minute into the film

Hi,
a few days ago I started working on a project in Final Cut Pro X (Trial).
The project is about 3 minutes long and contains audio throughout, which is perfectly audible within Final Cut Pro.
The problem comes with the export. After 1:10 minutes into the film, the complete audio fades out (1 sec. fade) and does not come back.
I have tried 5 different export settings already and it does not make any difference.
I have searched the whole timeline for a clue, but it looks absolutly normal. And as stated above, the music is audible throght the film in the preview.
I even tried to export a completly new project with another audio file. There was no problem there.
It seems to be a problem within my project. But I simply can not figure out whats wrong.
Some quick help would be greatly appreciated, as I am kind of in a hurry to export this movie...
Has anybody already had the same problem?

Well, I may have been a bit harsh with my statement. But on the other hand - This program is not completely new. It's actually one year old and has had something like 5 updates.
And there are many features that are definatly not professional. The whole timeline and the way it behaves is just totally irritating. And it's not like, I am the only one who is complaining. And to be called a professional programm, there are just too many uncountable features that are missing.
I mean, this was a really small and short project. But instead of being faster or as fast as in any other program, I was slower and was constantly trying to figure things out, that should have been super easy to find and understand. If I already encountered speed problems (on a very powerful Mac Pro by the way) , numerous bugs and export problems in a project this small, I don't wanna work on anything bigger with this "Pro" application.
@Tom Wolsky
I can post a screenshot as soon as I am back at our workplace. Probably tommorow.

Importing edited version back into iPhoto

I have certain photos that I keep in iPhoto. I was in Aperture and dragged a couple photos over for editing purposes. Now, when I want to bring the new version back into iPhoto it is not showing up in the Aperture library browser within iPhoto. I have Aperture 3.0.1 and iPhoto 09.
Thanks!

Please see- http://barbarabrundage.com/2010/11/29/using-photoshop-elements-9-with-iphoto/
Thanks
Andaleeb

Can you export a published iweb website back into iweb?

I have created my own iweb website which I uploaded to my own domain using transmit. Since creating the page, I had a had drive die on me that I can't access and don't have my site in iweb to edit as I have resorted to a back up made just before I made the site. So I want to know if I can access the site from Transmit and put it back into iweb for editing the site?
This is my first site I have made entirely on my own and have been learning as I go. If I can't access the site as I made it, I may try accessing the files from Transmit one by one to re-make the pages.
Any help on this will me very much appreciated.
This is my site for anyone who wants to see:
http://jemgirl.com
Powerbook Mac OS X (10.4.9)
Powerbook Mac OS X (10.4.9)

Sure, you could syncronize in the opposite direction to get your html files and images, etc back on your Mac. But you will have to drag and drop, copy and paste to get that content back into iWeb.
Your iWeb data is stored, not in your actual html files, but in a file called Domain.sites which is stored in your Home/Library/Application Support/iWeb folder. If you want to work on your site on another computer, copy this file to a thumb drive to move it around.
You should backup this file whenever you make big changes to your site, because if it gets lost or damaged, you will have to start all over. Sadly, many many people learn this the hard way. Unfortunately, looks like you have too.
I have an Automator app on my site that will help you backup your Domain file(s). Click here to download it or visit http://iweb.varkgirl.com for more info. The app will make a .zip file of your Home/Library/Application Support/iWeb folder and save it to a location of your choosing.
Then check out Mozy for an online place to store your backups - I just found this and it seems great. They just recently released a Mac friendly version of their app - it automates the upload and encryption. You select the files you want to backup and it does the rest. You can set it to upload automatically after so many minutes of inactivity or once a day. It does it all in the background so you don't have to worry about it! 2GB of storage are free - plenty of room for most people's iWeb Domain.sites backups!

Problems with image names when exporting - images that have come back into lightroom from photoshop

Can anyone help ? When I need to take an image from lightroom into photoshop then back into lightroom and then I export that image, the original file number disappears and is replaced by dashes. Does anyone know how to solve this ?
Thanks !

The appearance of dashes usually suggests some kind of pre-set e.g.
Wedding-20150106-0001.jpg
The only suggestion I can make is that you check to ensure you are using the correct parameters in the templates manager.
Photoshop Lightroom Reference Guide | Create Your Own Custom Filename Presets | Peachpit

Damage or non useable spares of equipment bring back into stores

Dear All,
I have created one b/d maintenance order for pump equipment. In this one bearing is damaged which is not useable. For this we will issue new bearing for order, so this spares cost will be booked on order.
But how I can bring damage bearing in stores which will be further going to be as scarp.
Can is it possible to bring back damage spares in stores with reference of b/d maintenance order which is already created. For this what will be cost effect on order.
Kindly give me the step by step procedure for this scenario.
Thanks & Regards,
Sandeep

Hi sandeep ,
you have define valutaion types for the material in Materails managemnt first
with same material code how you will identify the l,material whci is scrap or newly procured
Once valutaion exist for the material
Return the material to warehouse against same order number by movement type 262 then it will be automatically received in stock as valution type damaged
at mb11 by 262 system will ask you the material code
Regards
Pratap

After editing in photoshop how do I bring the edited photo back into lightroom next to the original photo instead of at the end of all the pictures?

After downloading Lightroom 5.5 my photos come back from Photoshop as the last picture instead of being next to the original. How do I correct this?

Most likely you need to change the Sort order of your images. In Library - Grid view there is a tool bar at the bottom of the grid window. If the tool bar isn't visible, hit [ T ] to activate it. Change the sort order to Filename or Capture Time. It is probably set to Added Order.

How 2 get edited photo from iphoto app back into iPhoto?

I have the new iPhoto app.
I can't seem to get my edit photos back into iPhoto on my imac.
I thought save to iTunes would do it but it doesn't seem to do anything.
Sure would like to just go back to my mac and find the photo updated.
I have the photo stream turned off and just sync with a cable.
Problem 2
The photos and albums seem to be in random order. This makes it almost impossible to find the photo I want to edit.
Can anybody please help?

<If you are using the cable: Connect your iPad > open iPhoto > select your iPad on the left under devices > Import <button top right of iPhoto (blue button).
<
<Do not import through iTunes.
Sorry - that was no help.
If I edit a photo in e iPhoto app then connect and bring up iPhoto on my mac the iPad device has no photos to import.
I have imported hundreds of photos from iPhones and iPads - I know how to import.
Even if there was a photo laying there to import - that is not what I want because...
Imagine if I had 100 photos then edited all 100 photos on my iPad.
Then if I imported them I would now have 200 photos in iPhoto on my mac.
I want the edited photo to update the original just as tho I edited it in iPhoto on my mac.
So I could "Revert to Original" if I needed to but probably never would.
So the question is when you share to iTunes where does it go?
Also the new album it creates "Edited" - What's the story on that?

Saving PSE10 edits back into Lightroom3

I'm working on a Mac, running 10.6.8. I recently upgraded from PSE9 to PSE10. No problem opening files in PSE10 from Lightoom, choosing TIFF format, 8-bit. However, when I try to save edited file back into Lightroom, Command-S brings up "SAVE AS" dialog box, which it shouldn't! It should save right back into Lightroom. I've checked prefences in PSE10 for maximize compatibility.
I've read Kelby book on Lightroom 3, page 258 says, "Now we're done editing in Photoshop and it's time to send this image back into Lightroom. There are two super-simple things you need to do to get this image back into Lightroom: press Comand -S to save the image, then simply close it." The book specifically says don't choose "SAVE AS," just SAVE and close.
Each time, it bring up the SAVE AS dialog box. AND it doesn't put the file back into Lighroom! What am I doing wrong, please???

I don't know about PSE10, because I only have PSE9 available. But in PSE9, there's a Preference where you can choose behaviour for Ctrl-S:
Sorry that this screen shot is in German, but I guess you can figure out what I'm showing (Preferences/Options for saving files).
But nevertheless, you should still be able to overwrite the TIFF when doing a "Save as", but keep the file name the same.
Beat

Saving photos edited in PS Elements back into iPhoto

I'm new to PS Elements and love it but am having trouble saving photos. I have set my preferences in iPhoto to open in PS elements for editing. So far that's great. My question is when I'm finished editing in PS Elements how do I save the edited photo back into iPhoto?? I'm sure there's an easy solution but beyond saving into PhotoLibrary in Finder then trying to find in within the many many folders and dragging into iPhoto - I'm at a loss. Any suggestions?

Jodeth,
That's great. Yup, it's those little things!
You can always do a "save as" and save to the desktop. This will not change the image within iPhoto which is sometimes a way to go if you don't want the image changed within iPhoto but want to use the edited image for something else.
Lori

Get edited data ou of grid back into internal tabel

Hi dear all,
after the help of so brilliant tutors i now can edit my ALV Grid, but I dont't know how i can get the content of the edited rows back into the internal table (it_outtab). I studied several methods, but for example the method SAVE_DATA is private, so I can't use it out of my program.
Many many thanks in advance for th friendly colleague who knows the answer.
Dorothea.

Hello Dorothea
If you just want that your itab contents reflects the data on the editable ALV grid then the simplest solution is to call the appropriate method at PAI:
" Your dynpro flow logic may look like this:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CALL METHOD go_grid->check_changed_data( ). " retrieves changes from editable ALV grid
" and updates itab, e.g. gt_outtab
" NOTE: If you do not need to validate the changed data there is no need
" to define an event handler method.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
You may want to have a look at ALV GRID Problem with reading contents and my dicussion with David Halitsky in Where/how would you add the actual DB update to BCALV_EDIT_03?.
Regards
Uwe

How do I export detached audio files as separate files, for Pro Tools processing?

My project is a live band performance. I have every song as a separate Event with associated audio. I have detachd all the audio from all the video Events. I now want to Export the audio files to Pro Tools for editing, then Import the edited audio back into FCP X and snap the edited audio to the associated video Events.
My problem is this: FCP X keeps exporting the audio as a single large WAV file, rather than as separate WAV files. In fact, the video events are separate, and so the audio associated with the video Events are separate.
I first renamed the Role of every audio file as "Music", then did a Share --> Export Media of all "Music" audio Roles. After exporting, I found it was one large WAV file, rather than separate files of different sizes.
As a 2nd try, I created Sub-Roles for each audio clip, and named each one with a distinct Sub-Role name. I then Exported all these Sub-Roles (yes, tedious). The result was that every exported WAV file was the same size, the same as the file size in my first try. The only audio that could be heard in each file was the audio in that particular song, but FCP X still created the very large file with silence in all the rest of the file. Since the file lengths don't match the original audio fil lengths, there will be a problem when I Import the edited files back into FCP X and want to Snap them into place.
Question:
How can I export the individual detached audio clips as separate files, the length of each file equaling the length of the original audio file in FCP X?
Do I need to separate the detached audio into separate Layers visually in the Project Timeline, so they are not touching? Or does this matter?
Help!!

Michael Holmes1 wrote:
I have to record all the color changes I make in one Project, so I can repeat them in the other 17 projects, etc.
No.
You need to explore Compound Clips. This workflow may or may not be of help.
Select an Event with clips in it and press Option+G to make a (blank) compound clip.
Select the Event Browser, create a new Event and call it 'Effects'.
Drag the Compound Clip into this Event.
Right-click the clip and select 'Open in Timeline'.
Select the timeline and press Option+W. This will add a Gap Clip to the timeline.
Select the gap clip and press Ctrl+D then type in the duration you want the clip to be.
Now open a project and select and copy one of the clips with effects etc.
Open the Compound Clip in the Timeline again, select the gap clip and press Option+Cmd+V to paste the effects into your Compound Clip.
This clip is now saved in your Browser and will remain there for you to copy and then paste the effects into any clip in any project.
It's a bit clunky, but it works - and once you learn about Compound Clips, you can work wonders with them. As an example, if you want to add more effects without overwriting the effects in the Compound Clip, simply make the Compound Clip into a Compound Clip (again) and add the effects. They will be added to the original effects.
Andy.

From Premiere to AE, then Back into Premiere

I have edited some footage in Premiere and applied a bunch of effects to it by importing the sequence to AE. I now wish to export the resulting AE comp BACK into Premiere, but while it appears in the bin, it's not allowing me to drag it onto the timeline? Is there any way around this?

You can't reimport AE composition with dynamically linked sequence back into PrPro. Similarly you can't replace a group of clips in PrPro timeline or a sequence, which already contains dynamically linked composition, with dynamically linked composition once again, 'cos that creates an infinite loop.
If you want to bring your dynamically linked sequence back to PrPro, export digital intermediate out of AE and import it into PrPro.

After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
"Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
to reimport edited photos back into my iPhoto library? Ideas?

Launch PSE Expert Mode and go to:
Photoshop Elements Editor >> Preferences >> Saving Files (tab)
Set the drop-down dialog
On First Save : Save Over Current File
Click OK.
When you have finished editing in PSE use Cmd+S to save (not Save As)

Export embedded audio Edit - bring back into Cp?

Similar Messages

Maybe you are looking for