Export embedded quicktime movies to html slideshow?

I'm trying to make an html slideshow of a keynote presentation that has embedded quicktime movies. The movies just get saved as single png images. Is there a workaround or something obvious I am overlooking?
Since iPhoto lets you do this, I would assume it isn't impossible, but perhaps it just isn't implemented within keynote (which seems kind of backward).

Thanks. I was afraid that was the case, but a former apple VP suggested I ask since there are many apparently undocumented features (and iPhoto/iWeb can do this, so the api exists).
The relevent html code is actually a java script that loads an array of exported png files. Each element of the array is defined like this:
images[2] = "mrnahh.html_files/mrnahh.003.png";
so I tried just telling it to load a mov file instead, but it wasn't so easily fooled. It might be easier for me to make a slideshow of the png files and mov files within iWeb (which really makes messy html and javascripts that are next to impossible to hack.)
Anyway, many thanks. I'll leave this open for now in case someone else knows a simple secret.
The HTML export feature is great, and produces nice clean simple interfaces and web code. I hate to abandon it.

Similar Messages

  • Keynote does not support exporting with embedded Quicktime Movies

    I hope this helps a few of you out before you run into this problem.
    Keynote does not support export to Quicktime with any slides that contain a quicktime movie.
    Created a 27 page slide show with transitions, music, narrations and 6 Quicktime movies (Actually LiveType Text scrolls)
    When I attempted to export it never finishes the export cutting it short after about 20 pages.
    And the pages with the movies, don't start playing.
    It exports fine as a quicktime movie without the movies inserted though.
    Spoke with Apple Support and they confirmed that quicktime placed files within Keynote playback is only supported from the native Keynote Application.
    I read somewhere on this board that it was an issue with Quicktime version 7.5, not so as I tried the same test on a mac with Quicktime 7.42 and it had the same issue.
    So, beware.
    LJS

    Maybe I didn't understand well what you said but it is possible to export a Keynote file with embedded Quicktime movies to a quicktime movie. Actually, I'm doing it and I works. BUT, the issue I get is that I can't get my embedded videos to loop. Grrr...

  • Embedding quicktime movie???

    hi, i'm struggling to load a .swf with an embedded quicktime
    mov into my flash page using the preloader + loader components in
    flash mx 2004!
    i've followed the help: "To create an application with the
    ProgressBar component in event mode:..."
    the loader works but the sound in the embedded mov starts
    playing before the visuals - pls help!!!
    this is the code on the 1st frame of the original SWF to load
    the SWF with the embedded .mov:
    stop();
    loader.autoLoad = false;
    loader.contentPath = "graphics/sponsjan_clip.swf";
    pBar.source = loader;
    // loading does not start until load() is invoked
    loader.load();
    and here's the final page:
    http://www.thebornkreative.com/promo/SponsJanBlokBroekies.htm

    Thanks Daniel. Your suggestion was correct.
    In order to access the quicktime movie file I had to use the following path:
    /<portal-name>/portlets/<portlet-name>/<movie-name>.mov
    "Daniel Selman" <[email protected]> wrote:
    Khosro,
    Khosro,
    My guess would be that the path to "sample.mov" is different depending on
    whether you access
    the page directly or the portlet is included within the overall Portal
    page.
    As an experiment, try changing the URL to an absolute path, or copying the
    file into the same location as your other portal resources.
    Sincerely,
    Daniel Selman
    "Khosro Beechey" <[email protected]> wrote in message
    news:3cc96a76$[email protected]..
    "Khosro Beechey" <[email protected]> wrote:
    Has anyone successfully embedded some form of movie file within a
    portlet.
    I have
    tried embedding a quicktime movie file (in a jsp and html file) and when
    I view my
    portlet within the portal page I get the following error message "Thedata
    that the
    plugin requested, did not download successfully.". However, when Idirectly
    access
    the content file (.html or .jsp) the quicktime movie file displayscorrectly.
    Any
    suggestions?
    Here is a the code snippet that I used:
    <OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B"WIDTH="160"HEIGHT="144"
    CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab">
    <PARAM name="SRC" VALUE="sample.mov">
    <PARAM name="AUTOPLAY" VALUE="true">
    <PARAM name="CONTROLLER" VALUE="false">
    <EMBED SRC="sample.mov" WIDTH="320" HEIGHT="240" AUTOPLAY="true"CONTROLLER="false"
    PLUGINSPAGE="http://www.apple.com/quicktime/download/">
    </EMBED>
    </OBJECT>The string, WIDTH="160"HEIGHT="144" should read WIDTH="320"HEIGHT="240".... typo
    error.

  • File type for export as quicktime movie

    I thought I read here that "Export as Quicktime Movie" produces a .mov file (although without the extension). I'm using Brightcove to host our videos, and their publishpod says it accepts .mov files, but doesn't seem to work with the file from FCE. Is it really a .mov? Or do I need to export using Quicktime Conversion (and burn up lots more time in the process?)

    Thanks...
    I did search the forum and nothing addressed my specific issue. Sorry if I didn't phrase my question clearly.
    Anyway, I suspect the problem is that the Brightcove software does not work well with the Apple Intermediate Codec. I had no problem with a .mov exported with H.264 compression. This adds extra time to my workflow, but I suspect it will be a necessary evil.

  • I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.

    I have FCE 4.0.1 and running OS x 10.7.5  when i burn my movie the audio from my movie clips don't come through .  My Sound effects and music can be heard.  First I export to Quicktime movie, make it self contained then open IDVD for an intro and burn it.  everything sounds great in preview but then ( once again)I lose my audio from my movie clips.

    Try Mixing Down the audio before export.
    This info may help;
    https://discussions.apple.com/message/1060680?messageID=1060680&amp%3b#1060680
    Also serch this forum for Mix Down you should find lots of info.
    Al

  • I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

    I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black.  I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

  • Export To Quicktime Movie (Reference or Self Contained) - GENERAL ERROR

    Hi -
    I recently had to re-install FCS2 due to problems with OSX.
    Now, for some reason, when I want to export from FCP to get a QT reference movie, I get a general error message. All other options from FCP export seem to work, but NOT export to Quicktime Movie.
    Any suggestions?
    Thanks.
    Chris

    how so?
    we can all do with a dummy's cheat sheet e.g. when making a master monitor the record device, not the computer.
    So come on, what'd you do?

  • Export to Quicktime Movie rerendering. Why?

    Hi
    I have a DV project edited in FCP 5.11 which is all completely rendered. It's actually made up of a number of sequences joined end to end each of which is rendered before rendering the final 'top' sequence. There are some heavily rendered motion still sections in there, so I don't really want to render them again.
    However when I Export to Quicktime Movie, using the current settings, ie not making a self-contained movie, it takes hours to render and looks like it is rerendering everything I painstakingly made sure was rendered to full quality already. Is there anything I can do to stop it doing this? (I am doing this to make things much easier for Compressor, rendering the whole project as a referenced movie.)
    Thanks for your attention.
    Regards
    Jeff Cole
    PowerMac G5 Dual 2Ghz   Mac OS X (10.4.6)  

    Just checking that you are, in fact, leaving the menu as Current Settings... and not changing it to match the settings of your timeline...
    Also, you say you are not making a self contained movie - you've left that unchecked? Are you sure you don't have any gray realtime bars over the top of your clips - resize, dissolve, etc don't require rendering until export. You need to check the Render All menu (opt-r) under Sequence has everything checked...
    Patrick

  • Export to Quicktime/Movie to MPEG-4 Quality Much Worse with Snow Leopard?

    I just tried exporting an HD movie from iMovie using Export to Quicktime - Movie to MPEG-4 for the first time since upgrading to Snow Leopard and besides taking forever to export, the quality at the same settings I've used before is terrible. There's terrible macroblocking even on relatively slow moving scenes. I've exported several movies using the same workflow previously to upgrading and the video was perfect.
    I use mpeg-4, H.264 encoding, 4096 bit rate, 1920x1080 HD resolution, key frame every 15 frames. It's definitely a change in the encoder as just sharing to the Media Browser results in expected quality.
    As a test, I tried upping the bitrate to 5120 but it didn't help with the macroblocking.
    Anyone with similar problems and/or a solution?

    I've actually started noticing more artifacts using the Share to Media Browser quicktime presets. The movies that are created don't seem to be as high quality as ones I've created before. It's almost like quicktime is missing keyframes or something and then artifacting. It's not consistent. I've got one mobile formatted movie where it artifacts badly in the first minute and then not at all afterwards. It's kind of frustrating.

  • Export to Quicktime movie continued crashes. HELP

    I have sequence, it renders no problem. Whenever I go to export to Quicktime movie it crashes. I have gone and deleted all files associated with it and redone the sequence from scratch, and I keep getting the same results. Crash while exporting. I am working in DV, so all I do at export is export to Quicktime movie, which means it should be exporting as a DV movie. I am not sure what is wrong please help.
    As always thanks in advance for reading and replying to my Post,
    Sebastian

    I did try burning the 18.05GB file on i-DVD but even with the auto compression of i-DVD it only managed to compress it down to 5.4GB - too large for my 4.7GB DVD.
    The only reason I need to burn it so my friend can author it is that he's a little too fussy and wants to author it on Adobe Encore.
    I managed to get a firewire drive - but the blooming PC didnt accept it as it was Mac formated!
    I just exported the original file as a QT movie, reducing sound quality, frame rate etc but it still comes out at 17.5GB - still to large for i-DVD (and thats with i-DVD's compression, which comes in at approx 5GB!)
    I really really blame myself for this as I never really looked into anything more than the creative aspect of FCP. But I've started now.

  • "Export as Quicktime Movie" -- won't play on other computers

    When I use the "Export as Quicktime Movie" option and try to play it back on a Mac without FCP installed, it is missing components and won't play back in Quicktime Player. Of course, I can export with various compressions and then it's fine, but sometimes I want that big "original" file. Any thoughts? Thanks!
    Message was edited by: elisenew

    You do need the codec you are exporting to installed in the other machine if you wish to play the exported file. A variety of codecs are available only with FCP installed.
    A couple of possible solutions are a very high res H.264 or Download [ProRes decoder|http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac] to share a prores file between machines.

  • FCP export to "QuickTime Movie" distorts aspect ratio of all text, displays video correctly.

    Hi you all,
    My name is Alexander, I'm from Belgium.
    I'm working on Final Cut Pro 6.0.6, on a MacBook Pro with a 2.53 GHz Intel Core 2 Duo Processor, running version 10.7.2 of Mac OS X (Lion).
    I'm editing a 'making of' of a Flemish feature film. I shot this 35 minute documentary short with my own Canon HDV-camcorder (XH-A1). The Final Cut Pro-project is stored on an external hard drive (1 TB LaCie Minimus).
    I've been doing exports to "QuickTime Movie" for years now, without any problems, but since a week or two, FCP started messing up the titles over the video - and the titles only. Their aspect ratio is messed up once exported, but they look just fine in the FCP Timeline (in Viewer, I can verify that the aspect ratio of the titles is always "0"). I'm trying to export this to "HDV - 720p25".
    Here's a comparison between the two:
    As you can see: the MOV has the titles' aspect ratio all weird, the upper one partly covering the lower one. All titles and text in the docu come out like this, but the video (and audio) is exported correctly.
    Any ideas on how to solve this very annoying problem?
    Many thanks!!
    Alexander

    Hi Studio X,
    Thank you for your quick reply.
    The producers of the film want to upload this making of-documentary on YouTube. Therefore, I need to give them a high-quality-mov with the least possible Megabites. My film has a 35 minute running time.
    So I figured: Let's start with the 'smallest' high-quality FCP-export to begin with (HDV-720p25), and throw that one in Compressor, in order to end up with a 'small' but good looking H.264-MOV for YouTube.
    But for some reason, those "HDV-720p25"-exports mess up the titles. And I can't figure out why.
    Alexander

  • "General Error" when I export to quicktime movie .mov

    I have no idea why all of a sudden FCE4 says "General Error" when I export using quicktime movie... If i use another option like mpeg4 or other it works fine. What could be a problem?
    I have lots of memory.

    I made the movie self contained and it started but then stops at 10%. This isnt anything complex just a few clips edited together w/ music. I just want to upload to youtube. I have no idea what the deal is!

  • How to export a Quicktime movie from IDVD ?

    How to export a Quicktime movie from IDVD ?

    Do you have a DVD that you want to get the video from?  Is it a commercial DVD or one that you created yourself?
    OT

  • Final cut pro problem when exporting with quicktime movie

    Hello!
    I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
    keyfram 10
    bitrate 6000
    faster encode
    size 1920x1080 HD 16:9
    its not a problem the movie works fine all the way.
    But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
    If you have an e-mail i can send you just the part where this happening.
    Please help me!
    Thanks Gabriel

    I am also expriencing the same error. Tried every solution listed so far:
    1. Switch off background rendering. Trash render files. Don't render. Export.
    2. copying the project within Final Cut Pro into another project
    3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
    Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
    What's going on?

Maybe you are looking for

  • XCode and recent versions of Subversion

    Hi everyone. I'm having problems using XCode 3.1's SCM integration with my hosting company's SVN version 1.5.2. I've heard people say that XCode won't work with SVN 1.4+, but I'm not sure if that's actually true. After filling out the SCM section of

  • What happened to the Author field in Pages 5?

    In Pages '09 (4.1) you could View the Author field of a document in Inspector, Info. Those 'Info' fields appear to be gone in Pages 5.0.1. Are they located somewhere else now?

  • New MBPro and iTunes does not work along with certain websites on Chrome and Safari

    I just bought my Macbook Pro 13" about two weeks ago. Everything worked fine when I was at school and at my friends house. The day I came home, I was not able to go to many websites such as Facebook.com or even my Gmail on Chrome or Safari. Also, the

  • Call of a submit in an RFC FM

    Hi Friends, Iam using a submit command in an RFC function module to create a spool(means cretaing the spool using SAP script). This RFC FM is being called from a third party system(Java platform) using a COMMUNICATION user. If I execute RFC from SM37

  • Zfd7-agent and nw-client 3.40 / win98

    I'm using zfd7 agent on win98 machines with nw-client 3.40 Update B . After installing zfd7 agent everything worked fine. But after some time the users see the zfd7-agent console to log in instead of the nw-client console if they start the win98 mach