Export Error Lightroom 3

Help!
I keep getting error message as follows, when I attempt a bulk export in lightroom 3 from RAW to JPEG:
The first 2 times it worked perfectly and when I tried to export the third batch it said:
An internal error has occured ?:0: attempt to index field '_dataChanges' (a nil value)
Can't find a field titled dataChanges anywhere

Hi Rob,
I rebooted and haven't had a problem since!
No idea what happened or why. Should have followed the age old IT solve all
Cheers
Date: Mon, 19 Nov 2012 16:17:55 -0700
From: [email protected]
To: [email protected]
Subject: Export Error Lightroom 3
    Re: Export Error Lightroom 3
    created by Rob Cole in Photoshop Lightroom - View the full discussion
Hi Chantelle - you're welcome, although I haven't been much help at this point. Which export service, which settings... - if you give me / us more to work with it may be possible some idea is triggered. Is it repeatable? Does it depend on which files are bing exported? OS version, Lr version... Even if still no ideas, Adobe would need such info in the bug report. Rob
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4860029#4860029
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4860029#4860029
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4860029#4860029. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
  For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

  • Exporting error: Lightroom has encountered an error and must close

    In LR 1.0 (Trial), every time I attempt to export my images, I get "Lightroom has encountered an error and must close." Details of the error point to first discburning.dll and then ntdll.dll as the culprits. I am only able to export using the "Export Presets."
    Prior to using LR 1.0 (trial), I used Beta 3, then 4.0, then 4.1. Prior to the first install of LR 1.0, I was warned by a friend to uninstall any older versions of LR. I did, the install was successful. After encountering this error, I uninstalled LR, followed by deleting the LightRoom Program Files folders, the backups, the databases, the settings, and registry entries. After reinstallation, the problem still exists.
    I've seen discussion (without definite resolution) of this issue in the beta forum, thanks to Google.
    Any ideas?

    So how do I disable nView. I've accessed the nView Desktop Manager from the Control Panel and discovered that the "nView Desktop Manager" only had the Enable button and that only 2 of the 11 tabs (Profiles was the only other active tab) were grayed out. I can only assume that nView is disabled and has been while I've been having this ptoblem. Just the same, I went so far as to uninstall the drivers altogether, reboot, launch LightRoom again. Upon trying to export, I get the same exact error. Please help. I really loved LR in Beta, expecially 4.1, but this problem really makes it difficult to work with.

  • Lightroom - Export error from Admin account

    Lion 10.7.4 MacPro  -  I cannot export from Lightroom 4 in my main Admin account. Lightroom gives me an error message - When I create a new admin account I can export from LR4. It also works on my two laptops. Spent much time with Adobe and it was determined that it was an Apple issue. Can anyone help?
    Thanks,
    JT

    There's one thing you could try that might or might not have an effect. If it doesn't, I have no other suggestions.
    Repairing the permissions of a home folder in Lion is a complicated procedure. I don’t know of a simpler one that always works.
    Back up all data now. Before proceeding, you must be sure you can restore your system to its present state
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    chmod -R -N ~
    The command will take a noticeable amount of time to run. When a new line ending in a dollar sign ($) appears below what you entered, it’s done. You may see a few error messages about an “invalid argument” while the command is running. You can ignore those. If you get an error message with the words “Permission denied,” enter this:
    sudo !!
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
    Next, boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens. You’re not going to reset the password.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Lightroom 1.1 Export Error

    I just upgraded to Lightroom 1.1. Now I can't export. I get an export error message pop up.
    I have tried to exporting from a file (left menu) and from collections (left menu). Both render an export error message.
    When trying to export 16 photos, here is the message I get:
    "An error occurred while exporting. 16 folders failed to export."
    Am I missing something here? It worked really well in V1.0.

    I am also having problems with 1.1 and exporting. I attempted to batch about 3,000 RAW files to JPG the other day. I selected the folder and chose my export settings. Then it began to churn through them as normal. The goofy thing is that when they finished about 3hrs later only 250 of the 3000 were on the disk. LR gave me an error, "Unable to export 25xx pictures" with no other information. I have about 300gb free on the disk and am using a Inspiron 1705 with 2.2ghz core 2 duo and 2gb of ram. I don't understand why it would continue to act like its exporting when it really wasn't? Oh! not to mention I have been getting the OUT OF MEMORY upside down in red with 1.1 as well!

  • Export from Lightroom: folder not found.

    New Problem with export from Lightroom. I always have to select the folder where to save to, even if it was selected before. This means I have to click on an already activated folder at every export.  Why? This problem wasn't there before.
    I always use the option "choose folder later on" at the export dialog box.
    Error message: "Es wurde kein Zielordner für diesen Vorgang angegeben."
    Thanks for help folks!
    Best
    Bernd

    Normally when Lightroom says "not enough memory", that's exactly what the problem is, you don't have enough memory.
    A partial solution would be to make sure no other applications are running when you do this export.
    The real solution is to make sure your computer has both 8GB RAM (or more) and a 64 bit operating system. One of these by itself without the other will not improve the situation.

  • Trouble exporting from Lightroom 4

    While trying to export from Lightroom 4, I was getting the error message "An internal error has occurred:WIN32 API error 2, etc.   Others have asked about this and the solution offered was to check "Do Nothing" in the post processing box, which I have done.  Now I can export, but the image is severely downsized from being a full sized jpeg.  How do I get it to export at full size?   All was working fine with exporting until today

    Thanks...the quality slider was at 60 - moved to 100 and it solved the problem.  Simple - Thank you for suggesting - I was getting a headache trying to solve my issues today!

  • Book Module: exporting from Lightroom as a 2 page spread

    Hello Lightroom people,
    I have begun to create my albums in the lightroom book module, and I am about 85% happy with it. I have one major complaint, and I'm wondering if it can be corrected:
    My album company wants me to submit my album pages as two page jepg spreads. For example, if I am making a 10" x 10" book, rather then submitting pages 1 and 2 as two 10" x 10" jpegs, they require a single, 10" x 20" jpeg that is then printed as pages 1 and 2.
    When I export from lightroom, it exports instead as single pages (to use the example from about, two 10" x 10" jpegs for pages 1 and 2). I've noticed that if I design a 2 page spread--then it will export that the way I want it, but obviously no album can have all  2 page spreads.
    My work around for this is to import the jpegs in photoshop and lay the pages together the way my album company likes, but this is somewhat time consuming.
    Is there a setting in the book module I am missing that could correct this?
    Thanks,
    Ellen

    JimHess wrote:
    The book module is designed specifically to work with Blurb.
    Which was the biggest error in decision making Adobe made in going forward with the book module ... it should have never been tied to ANY single vendor ...
    JimHess wrote:
    I just export copies of my images and use the software provided by the book company to create my books.
    Yes, there is always a workaround, though Lr was supposed to simplify the process, not create more work ... though if we were discussing having to export images ... THEN ... send them to a printer instead of printing them directly in Lr ... there would be much more discussion about the problems the Book module poses for many users ...
    If I must export images and use outside software to finish the job (InDesign or otherwise) I may as well give up Lightroom as a "workflow solution" ... I could get the same job done working with Bridge/ACR/Ps workflow ... however ... I bought into the paradigm of Lr being the answer for RAW processing to output workflow ... though Adobe seems to pick and choose which features they really care about ... If Adobe is going to include a Book module, and expect me to financially support the effort ... they could at least offer a module that is functional without being tied to a single vendor ...

  • Corrupted EXIF data in photos exported from Lightroom CC

    After upgrading to Lightroom CC EXIF can't be read by some apps. "Re-saving" a file in Photoshop fixes the problem. I'm using Mac OSX 10.9.5. Are there any plans to update and fix the EXIF data generated when exported from Lightroom CC?
    Also, this command fixes the issue with Create Date part of EXIF.
    #!/bin/sh
    exiftool -AllDates="$(exiftool ${1} | grep 'Create Date' | awk '{print $(NF-1), $NF }')" -overwrite_original ${1}
    The reason I'm asking is because we run a site where "Create Date" read from JPG's EXIF is crucial and it's a matter of letting users upload the pic or deny uploading.
    So again, any plans on the fix?
    Regards,
    Pawel Kadysz

    I confirmed that the Exiftool command line:
    exiftool -m -all= -tagsfromfile @ -all:all -unsafe file.jpg
    removes the ICC Profile, which could account for significant color differences, considering that the profile is Adobe RGB.  I think this may be a bug in Exiftool, so I filed a bug report.  (But it might be that Exiftool just can't handle the non-standard layout of LR's JPEGs.)  The author is typically very responsive.
    I tried some alternate Exiftool command lines that touch as little metadata as possible, and this one seems to address both of LR 6's JPEG problems:
    exiftool -m '-exif:datetimeoriginal<exif:datetimeoriginal' -xmp-crs:all= file.jpg
    The -m option ignores minor errors and issues, in particular, when there are more than 1000 entries in the XMP metadata.
    The '-exif:datetimeoriginal<exif:datetimeoriginal'  option sets the EXIF Date Time Original Field with its current value; this tricks Exiftool into rewriting just the EXIF metadata without touching the other metadata segments (e.g. the ICC profile), addressing the first JPEG problem.   (You could use any EXIF field that's present -- I picked DateTimeOriginal since every camera adds that.)
    The -xmp-crs:all= option option deletes all of LR's develop settings from the XMP metadata, addressing the second JPEG problem.That metadata is not ready by any programs other than LR, as far as I know. 
    I've tested this new command line on a couple of pics, including the example you provided above, and it appears to work correctly.  But given that we're dealing with buggy output from LR that doesn't conform to the de facto and de jure standards, it's hard to have high confidence without testing on dozens if not hundreds of pics.

  • Adobe media encoder export error  "writer not found"

    When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
    Thanks

    I registered the WMEncoderHelper.exe file with regserv, but I still get
    the "writer not found error". I wish I knew what codec it is trying to find and use.

  • Quicktime Export Error: "An output module stopped responding."

    I'm experiencing an odd export error whenever I use any Quicktime codecs:
    "After Effects error: An output module stopped responding. The file may be damaged or corrupted. You may need to restart After Effects."
    Similarly, Adobe Media Encoder hangs when outputting to Quicktime codecs. Neither program makes any progress at all before the hang occurs. At that point, I have to manually "end task" to exit. Also, it doesn't seem to matter what I try to export. In AME, for example, I can simply try to convert one video format to another and have it hang, so I don't think the problem is due to a problem with the source settings or effects. Also, I'm not attempting any multiprocessing since I don't really have enough RAM for that. Other output modules work, so I'm just exporting image sequences for the time being.
    System specs:
    Windows 7 64-bit
    Intel i7-2600k processor
    8 GB RAM
    GTX 580 GPU
    Software:
    Adobe CS6
    AE Plugins include Tracode Suite 12 and Optical Flares
    Quicktime 7.7.3
    Any thoughts on this? I've seen very few references to this error in other places, and not really found a solution that seems to apply to my situation. Thanks in advance for your help.
    Josh

    Thanks for setting me in the right direction. Clicking through to the 25 :: 101 error page (http://myleniumerrors.com/2013/01/06/25-101-4/) led me to a reference about other software, such as remote access software, using the same ports that AE needs for communication with its various processes. In my case, LogMeIn was the culprit. I had no idea that AE even used TCP for these types of operations, so that's very helpful to know.
    *EDIT*
    That worked temporarily, and now it doesn't work. I ran into a similar effect when I first disabled the Windows Firewall. But of course, as I type this and piddle around, it works again. It SEEMS like if I open AME and click into the output settings and scrub through the video preview, it makes everything work when I go to actually export. That's exactly the type of thing I would say is completely unrelated under normal circumstances, but at the moment all I know is that it is currently working and I don't want to test anything else until I finish the rendering I need to accomplish today. I'll work on it more later and post an update at that time.
    Thanks,
    Josh

  • How do I export from Lightroom 3 to an Ipad 2 for the purpose of showing pictures?

    I want to use my Ipad 2 to show people pictures that I have taken.  I am not certain as to the best workflow for doing this.  I store all my pictures on external hard drives and am hoping to avoid bringing processed photos onto my computer hard drive.  I have done a search on the forum and have not seen a recommended work flow.  I would greatly appreciate some advice on this.

    Have a look at this Russell Brown video tutorial that go into a fair amount of detail of how to go about exporting images for iPad
    http://tv.adobe.com/watch/the-russell-brown-show/exporting-adobe-lightroom-3-images-to-an- apple-ipad-portfolio-/

  • PE 7 memory and export errors

    In Premiere Elements ver 7, I have put together a 4 1/2 minute video made up of mpeg4 HD 720p mixed with regular avi digital footage. I am having memory errors and export errors when trying to render into a wmv or mpeg file.  When working on previous videos with non-HD footage, I didn't have these issues. I also recently put together a 1 minute mpeg4 HD 720p video rendered into HD 720p wmv file without any issues.
    1) memory errors - I got these when I was putting the video together and when rendering. After a lot of restarting the PC and reworking the video, I was able to finally complete in pre-render format.  It includes music soundtrack and transitions/effects.
    Here are my PC's specs:
    Dell Inspiron 530 with Intel Quad Core CPU 2.66Ghz processor
    4 GB RAM
    32 bit OS
    Windows Vista SP1
    When rendering, I get the "caution - low memory, save your work" message. I have since set the virtual memory paging file size per Technote kb404939.  This seems to have helped a little bit but still getting the message even though it continues to render....but then I get the export error message....
    2) Export errors - I first tried to render into a wmv HD 720p 30fps file. In the first 1 of 2 rendering phase, I got the "Export Error - failed to return a frame - cancelling operation" message. I checked for gaps in the timeline and there are none. Even though I do have some black space/dip to black sequences, I can "page down" through the entire movie without any pauses or hiccups with the CTI (Current Time Indicator).
    I then tried to render into a smaller wmv LAN speed file, and it went through the first 1 of 2 phases rendering (with the low memory message but it kept on going). Just after it started into the 2 of 2 rendering phase, I got an error message saying "Export Error - Unknown Error".
    What to do? I'm very frustrated at this point after a great deal of time invested in this video and troubleshooting the issues. Please help. Thanks.

    What are the sources of your video? What types of camcorders did this video come from?
    Premiere Elements supports AVCHD video, but does not work well with video from Flip and webbie camcorders, which use proprietary codecs. They can also use non-standard frame rates. Conversion is usually necessary before the files can be edited in Premiere Elements.
    And does your DV footage come from a miniDV camcorder captured over FireWire? And what project settings are you using in Premiere Elements.
    I would also not recommend mixing HD and DV footage in the same project. This could also be contributing to your problems.
    I also recommend you visit Windows Update and manually download any (even non-critical) updates. Vista should be at least on SP2. You may also want to download the latest version of Quicktime.

  • FIM MA Export errors. There is an error executing a web service object creation.

    While checking for the permission, we have figured that the Built-In Synchronization account is being deleted by an Expiration Workflow.
    FIM MA Export errors. There is an error executing a web service object creation.
    While checking for the permission, we have figured that the Built-in Synchronization account was deleted by an Expiration Workflow
    Is there a way to restore. Thanks.

    I would re-run FIM setup - I think it can re-create this account
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • Export error adobe premiere elements 12

    im trying to save a video as AVCHD with the YouTube HD presetting. ive done it before but this past time ive tried it, it gave me a message saying export error an unknown error has occured.
    Please help
    Thanks,
    Noah Ogan

    Noah Ogan
    Thanks for the reply. It is late where I am so I will just give a few comments now and more in the morning.
    1. If you have not already, open a new project and try the export
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 - H.264 1920 x 1080p30 (assuming a NTSC setup)
    2. What is the video compression for your file with the .avi file extension? The file property appears to include
    a. file size 101 GB and file extension .avi.
    b. duration 25 minutes and 7 seconds
    But, when you get to export as cited above, what is the estimated file size and duration? The duration should
    remain 25 minutes and 7 seconds, but what does it show for estimated file size.
    3. Is your computer optimized - no pile ups of preview files, conformed audio, or conformed video files? Where are
    the Scratch Disks pointed to and how much free hard drive space is there?
    4. Do you have any older source files that worked before for export that you could try in the present situation to compare with this current source?
    More later.
    ATR

  • Export errors after patch Database9i 9.2.0.1 to 9.2.0.5

    Dear OTN,
    I have problems with exports after appliying the patch 9.2.0.5 to 9.2.0.1. The database was created new under the new release.
    Solaris 8
    For example:
    $ exp seguridad/seguridad@silim owner=seguridad file=prueba2.dmp
    Export: Release 9.2.0.5.0 - Production on Wed Aug 11 14:17:16 2004
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.5.0 - Production
    Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
    About to export specified users ...
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user SEGURIDAD
    . exporting PUBLIC type synonyms
    . exporting private type synonyms
    . exporting object type definitions for user SEGURIDAD
    About to export SEGURIDAD's objects ...
    . exporting database links
    . exporting sequence numbers
    . exporting cluster definitions
    EXP-00056: ORACLE error 31600 encountered
    ORA-31600: invalid input value EMIT_SCHEMA for parameter NAME in function SET_TRANSFORM_PARAM
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 3926
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 4050
    ORA-06512: at "SYS.DBMS_METADATA", line 836
    ORA-06512: at line 1
    EXP-00000: Export terminated unsuccessfully
    If I execute a full the error terminate with:
    . exporting system procedural objects and actions
    . exporting pre-schema procedural objects and actions
    EXP-00008: ORACLE error 3113 encountered
    ORA-03113: end-of-file on communication channel
    EXP-00008: ORACLE error 1041 encountered
    ORA-01041: internal error. hostdef extension doesn't exist
    EXP-00000: Export terminated unsuccessfully
    But if I execute table by table the export work fine!!!
    Please any help with this are welcome!!
    Best regards,
    Alfredo.

    Normally the export error on EMIT_SCHEMA can happen if the catpatch.sql script was not run successfully after a patchset install.
    See Note:232120.1 on MetaLink
    Login as SYSDBA and run catpatch.sql (without other users logged in).

Maybe you are looking for