Export failed, where is the temp file?

I am on version 6 of Premiere.  A media export failed in the middle due to insufficient space.  Before the export the hard drive has about 1GB of free space.  After the failed export the drive is left with 10MB of free space.  I am suspecting there might be some temporary and intermediate files created during the export process.  I checked the output folder and removed the temp file there. But the space has not been reclaimed.  Does anyone where else I should check?

1 gig of space is bound to make the export faile.
You need adequate space, Your disk needs to be empty for at least 25%.
Empty your Media Cache in your prefereces/Media
Also clean the path mentioned at the top.

Similar Messages

  • Scratch Disc Full: Where are the temp files kept?

    Hi,
    I just tried to open a few of very large image files (9GB in total) and when I did I got the message "scratch discs full". Now I understand why that happened, but it seems to have eaten a whole load of disc space that wont come back. I've since closed photoshop, restarted my Mac, etc. but about 10 GB is still used up where it wasn't before. I can't locate any temp files anywhere (prefs only tells me the scratch disc is my Mac HD, not which folders it's in). Can anyone help me with this? Where are Ps temp files usually located on a Mac? I need those 10GB back!
    Mac OSX running Photoshop CS3
    Thank you!

    Hi again Chris (or anyone else who cares to contribute),
    My Mac's HD space continued to disappear and I have now, finally, located the cause (I think). I checked the system log (Stystem Profiler/Software/Logs/system.log) which was itself 4.5 GB in size (too large I think?). However, when I went to the file location (/var/log/system.log) I also noticed that the "asl" folder (in the same folder as the system log) was 20 GB in size!! Having read a few forum posts about similar issues, I took the risk of deleting both the system.log and the majority of files in the asl folder. This seems to have worked a treat (I now have 25GB returned to me).
    As I said in my original post, this all started happening when I opened a few very big Photoshop docs (ones with layers). Do you have any idea what caused / is causing this to happen? I haven't opened Photoshop since deleting the asl files, but new ones still seem to be appearing in the asl folder. They are tiny (100KB at most) but I'm a little concerned I haven't fixed the problem. Any suggestions?
    I can't see why new asl files would be appearing when I haven't even opened Photoshop.
    I'm running on OS 10.5.8
    Many thanks,
    Matt
    P.S. By the way, the size of the system.log seemed to be caused by a repeated message regarding RealPlayer, which I assume is unconnected, but I have included it below just in case (I've removed RealPlayer from my Mac to see if that helps, but the asl files still seem to be appearing):
    Jul 28 18:16:07 localhost RealPlayer Downloader[299]: Failed to create window context device
    Jul 28 18:16:09: --- last message repeated 1 time ---
    Jul 28 18:16:07 localhost RealPlayer Downloader[299]: _initWithWindowNumber: error creating graphics ctxt object for ctxt:0x1152b, window:0xffffffff
    Jul 28 18:16:07 localhost RealPlayer Downloader[299]: CGWindowContextCreate: failed to create context delegate.

  • Where are the temp files?

    My wife was working on a powerpoint presentation in the newest version of Microsoft Office and it just closed. Where would I find the temp file? She did not save it. Is it gone? What do I have to do to make myself her Superman in instances such as this?

    Hello skin:
    The Microsoft Office help has information about the autosave feature. I use Office, but have never had to recover. It appears that the process is automatic and that the temp file is deleted when you close the program. There is a note that this feature is not a substitute for periodically saving a 'work in progress.'
    Barry

  • The 2 year old fix for changing temp files is no longer valid, I need to change the temp file location in the latest firefox.

    In 3.6.3 I'm unable to find the parent cache to change where the temp files are located. I have an SSD drive, and I need to get the temp file off, and onto my platter drive. I have read the previous fix of about:config and changing the parent cache location, but it no longer seems to be there. I'm unable to locate anything relating to my SSD drive location in about:config.
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.70 Safari/533.4

    Unfortunately, it appears that what I wrote about not being able to find the location IN about:config of the cache to change it from my C: drive to a different location, was mildly misunderstood that I didn't know how to get into about:config.
    The location of browser.cache.disk.parent_directory does not currently exist in 3.6.3. I'm assuming it's under a different location. Also using the simple string of "cache" lists several options, but none of them appear to be where firefox is currently dumping the temp files onto my C:
    I merely need to know how to switch the temp file location from 1 drive, to another. Not downloads, the temp file.

  • I have LR 4 and now I cannot open the software because I get this warning: light room cannot start because it cannot create files in the temp file location.. C:/windows/temp. How do I fix this? I have removed and downloaded LR and even used by disc and st

    I have LR 4 and now I cannot open the software because I get this warning: "light room cannot start because it cannot create files in the temp file location. C:\windows\temp\". I think I need to have LR open in a different place but I have no idea how to do that. Any help is most appreciated.
    Alex

    Jim
    Thank you for your prompt reply. Unfortunately I am not that tech oriented and
    cannot easily find that folder. I did notice when I was booting up the LR software
    that I could accept the site where LR usually is set up or choose a place. I am
    thinking that the standard location for LR software is corrupted and that if I
    chose a different place it would work. I say this because whether I use my
    original disc or download from adobe I get the same warning. I have 100GB of
    memory on the hard drive and I have cleaned the computer with Mcaffee and free
    software. What should I do next? I can't use this software and I doubt LR 5
    would open up with my current problem.
    Alex

  • Stickies, where is the backup file?

    Stickies, where is the backup file?
    I saved some u/n and p/w data in stickies on my older bronze (which I now need) and reformatted the disk when attempting to install OSX (which failed time and time again), but I'm hoping that I saved the Stickies data somewhere on a cd backup? I can only hope, but ran out of places to look ... any suggestions? Where is stickies data stored? ..... and where and how does everyone else store passwords and usernames and such?

    Hi, Dennis -
    One way to handle spam is to use an email service provider which allows the generation of alias email addresses. One such is Apple's .Mac service - the email service provided as part of a .Mac account includes the option of creating as many aliases to the real account address as one wishes.
    An aliased email address can be given or posted where needed, and any mail sent to it ends up in the 'real' account. Once the alias address starts drawing excessive spam, the alias can be discarded.

  • Where is the image file size???

    Where is the image file size in LR3? I can't see it anywhere neither in the Library module, nor in the Develop module.

    As far as I know Lightroom does not display the file size. Keep in mind that LR never makes changes to the Original files that you import.
    When you export a file with LR edits the file size generated will depend on the edits applied and the size and quality settings you choose in the export dialog.

  • Where are the iPhoto files separate from the program?

    Hi.
    I am running iPhoto 8.1 in Leopard 10.5.6 on my early 2008 MacBook Pro 15".
    I want to "backup" my iPhoto files. How I used to do this before Leopard, was to go into Pictures and find my iPhoto folder and there, I would find all the folders of my imports from my camera, numbered and in order by years, also. I would them just drag and drop each folder into Toast, and when it reached a DVD volume, I would burn a disc.
    Now, in Leopard, I cannot find the iPhoto Files Folder. Every way I have tried to access it, I end up with iPhoto and when i click, it opens the program. SO what I have is the open program with the photos in the events.
    How do I find and Where is the iPhoto Files Folder.
    Thank you.
    Waiting for your replies!

    How I used to do this before Leopard, was to go into Pictures and find my iPhoto folder and there,
    This has nothing to do with Leopard or the Operating System.
    With iPhoto 7 (iLife 08) the old iPhoto Library Folder became a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    Want to look inside? Select the iPhoto Library and right click on it. From the resulting menu select 'Show package Contents'. A Finder window will open with the Library exposed.
    Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    I would find all the folders of my imports from my camera, numbered and in order by years, also. I would them just drag and drop each folder into Toast, and when it reached a DVD volume, I would burn a disc.
    Any time you access the iPhoto Library via the Finder or any other application you risk damaging the Library.
    If you want to burn a back up using Toast then use the Media Browser built in to Toast or any of the following:
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

  • Where is the temporary file while copying a pdf to the Clipboard?

    When one does a Ctrl+A/Ctrl+C with a very large pdf, the Clipboard does not get populated until the progress bar completes. Where are the bytes going during the interim?
    (Save As text is not an option)
    Thanks

    "Audio and video file that do download by way of Safari (progressive download) ...there are temp file, but the temp files themselves can't be open."
    Thanks for your answer. Sorry for using the wrong term (streaming v. progressive), but my basic question still remains: WHERE then is the progressive temp file stored on my Mac (even if it can't be opened)?

  • Where is the temporary file located for streaming audio or video?

    I've noticed that when listening to streaming radio that Safari (v. 4.0.2, MacBook, Leopard 10.5.8) is apparently storing the feed temporarily someplace on my computer, as one is able to go forward and back on the content, if one has paused the feed for awhile. Where is this temporary file located, i.e., what is the path on my computer for it (assuming that is where it is), please?

    "Audio and video file that do download by way of Safari (progressive download) ...there are temp file, but the temp files themselves can't be open."
    Thanks for your answer. Sorry for using the wrong term (streaming v. progressive), but my basic question still remains: WHERE then is the progressive temp file stored on my Mac (even if it can't be opened)?

  • I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

    I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
    Failed to verify the preflight file. It is not signed by Apple.
    How to I get past this?  I cannot find anything referencing preflight file.  Who can identify this?

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ Certificates
    There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to  CRL. Log out, log back in, and test.

  • Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.

    I have received the follwoing error when I depoly the custom masterpage with css, images, javascript files:
    Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.
    Any help will soon is appreciated.

    Hi Bagalur,
    Thanks for your sharing. It will help others who stuck will the same issue.
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

  • Creation of Recovery Disks - 'Failed to open the following file" Error

    Greetings All,
    I am in the process of trying to create a Recovery Disk Set for a Client's *Satellite L300 - PSLB8A-07U004*.
    While the application opens and begins the creation of the disk set, it has, three times now, failed at with the error message of *"Failed to open the following file. D:\!V5_01_07.VRP (Error Code: 020123-F1-00000000)".*
    I did attempt this process the first time while the all the client's data was still loaded.
    I have now done a 'Restore to 'Out of the box experience' because I thought one of those files might be the cause but, alas, the error was repeated.
    Obviously this is irritating (to say the least).
    I have NOT made any change to the layout or sizing of partitions.'
    Any thoughts?
    rampant_rhino

    Thank you both for your responses.
    You were on the right track.
    I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
    On changing over to TDK disks, the problem did NOT repeat.
    Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
    Again, thanks to you both.

  • 'failed to open the PDF file' error - Indesign CS3 on Mac

    Hi,
    Whenever I place PDFs that were created by any other app besides indesign or Illustrator I get a 'failed to open the PDF file' error, previously these PDFs were fine to place but all of a sudden they're not... Help?
    I'm not too keen on opening in Illustrator and resaving for the rest of the foreseeable future either...
    Jared

    Thanks for the reminder, Scott.
    http://indesignsecrets.com/failed-to-open-pdf-error-show-options-to-fix-it.php
    Bob

  • After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

    After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

    You should install Camera Raw 4.6.
    Visit this page and follow the instructions carefully:
    PC:    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
    Mac:  http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
    -Noel

Maybe you are looking for

  • (ABAP) Code in Transformation--Modification

    Hi Experts, As i am new(Learner) to BW Please advise me on how can i achieve this and update me with Releavent Start Routine and Field Routine....please My Requirment is Employee is Compounded on Location. On Weekly or Monthly basis (dependending on

  • Problem in positioning of the Overall Result Row when using a hierarchy

    Hello All, i've built a query on a hierarchy and i want the 'Overall Result' to be displayed at the bottom. I've made the following setting in the Query Designer <b>Query Properties -> Display -> Results Position -> Bottom/Right</b> but still, the 'O

  • Itunes constantly maximizes

    Hi there, Since I ran an update this morning (to Vista plus a few drivers) iTunes has started to constantly maximize / focus itself every few seconds. as I've been writing this it's done it a few times already. It's driving me freaking bananas! I'm o

  • Number was used up in this sequence

    Hi Expert, When i am opening any document like "AP Invoice" or "Outgoing Payments" it's give me the error "Number was used up in this sequence" Thanks & Regards, Tushar Nathwani

  • Print spooler won't start in 8.1

    I recently updated my Toshiba Satellite c55 to Windows 8.1 and now every time I try to it says Print spooler is out of service. when I go to services and try to start my print spooler manually it says the same thing. Ever since I updated I can't prin