Export failures -

We are exporting a 40 gig worth database and getting an error
ora-04063: package body "sys.dbms_aq_sys_exp_internal has errors
ora-06508 pl/sql: could not find program unit being called
It list these errors multiple times for different package body
sys.dbms_logrep_exp, sys.dbms_repcat_rgt_exp, dbms_logmnr_logrep_dict etc.
and continues to do the export of the tables and creates a dmp file.
We have about 4 dbs on this AIX box running oracle 9.2.0.7 and the errors comes on only one of the db, remaining exports are competing fine. I did some search and was asked to check exppkgact$ table but it returns the same rows for all of the db and couldnt identify any specific pattern for failure
Any input is greatly appreciated...
thanks

Check now list out owner and number of invalid objects.
SQL> select owner,count(*) from dba_objects where status='INVALID'
2 GROUP BY OWNER;
Well, run the utlrp.sql script to recompile all invalid objects
The default location of utlrp.sql is under.
ORACLE_HOME/rdbms/admin
Rem NOTES
Rem * This script must be run using SQL*PLUS.
Rem * You must be connected AS SYSDBA to run this script.
Rem * There should be no other DDL on the database while running the
Rem script. Not following this recommendation may lead to deadlocks.
Regards,
Sabdar Syed.

Similar Messages

  • Import Wizard: Unknown export failure

    Hi -
    We have about 30 universes in 3.1 SP2 and I am having probelm exporting 2 of them to a .biar file.  I get the Unknown export failure message in the Export View Log window.  I am able to export all of the other universes, including the corresponding Test universes that created the problem ones (copy through export in Designer) and direct copies of the problem ones (copied to new folder).
    The log files state:
    "Type","ID","New CUID","Title","Severity Code","Severity","Details"
    "CrystalEnterprise.Folder","3715","AYEywY5nSSNHoy1.hQm8NZ8","APPLICATION Universes","4","Error","Unknown export failure."
    "CrystalEnterprise.MetaData.DataConnection","4874","AStHrjF7ETVNvIIvq4xffXs","APPLICATION CONN","4","Error","Unknown export failure."
    "CrystalEnterprise.Universe","3600","AYtNIib.5cdHuy0oa7Mm3yA","APPLICATION UNIV48 Summary","4","Error","Unknown export failure."
    "CrystalEnterprise.Universe","3599","Aeih7_KjLvpEoKViEcsfxNc","APPLICATION UNIV48","4","Error","Unknown export failure."
    "CrystalEnterprise.CustomRole","6658","Aaw6myUxTcdCsXdSV0vIEyM","Admin_Access","4","Error","Unknown export failure."
    "CrystalEnterprise.CustomRole","193","AVog52Tl72ZGvIReeqKndUA","Full Control","4","Error","Unknown export failure."
    "CrystalEnterprise.CustomRole","6659","AXZTQBwYYptJttalHxxbYqQ","User_Access","4","Error","Unknown export failure."
    Source Type: BusinessObjects Enterprise XI 3.x
    System: DC38-SNR-WEB01
    User: Administrator
    Authentication: Enterprise
    Destination Type: Business Intelligence Archive Resource (BIAR) File
    BIAR file: C:\Users\joness\Desktop\test.biar
    Import universes
    Import custom access levels
    Import universe and connection objects that the selected documents use directly, as well as any other universe and connection objects they depend on.
    ID: 3715
    Title: APPLICATION Universes
    Details - Error: Unknown export failure.
    ID: 4874
    Title: APPLICATION CONN
    Details - Error: Unknown export failure.
    ID: 3600
    Title: APPLICATION UNIV48 Summary
    Details - Error: Unknown export failure.
    ID: 3599
    Title: APPLICATION UNIV48
    Details - Error: Unknown export failure.
    ID: 6658
    Title: Admin_Access
    Details - Error: Unknown export failure.
    ID: 193
    Title: Full Control
    Details - Error: Unknown export failure.
    ID: 6659
    Title: User_Access
    Details - Error: Unknown export failure.
    Error! Failed to write out object IDs map to ids file.
    Any idea?
    Thanks in advance....

    This thread is being moved from "BusinessObjects General" forum to "BusinessObjects Enterprise Administration" forum to be more in-line with the nature of the question.

  • Adobe Premiere Elements 10 cant export mov files to QT h.264: export failure

    Hello,
    I edited my project in Adobe Premiere Elements 10 and want to color correct it in Davinci Resolve Lite. I tried to export my mov files (shot on 60 D 1920x1080 25 fps) to QT h.264, so I can import them in Davinci. I have the same Problem when I want to export to uncompressed YUF 8bit.
    The pc says something like: Failure during creating the file. Cant open or create the export file.
    Is it a problem of the progamm? Is it impossible to export it in that codec ? Should I use another export codec ?
    Greets Stefan

    Hello,
    Sry I didnt find any Premiere Elements in my selection, next time I post it directly here.
    Im using a windows hp 7 64 bit, Adobe premiere elements 10, last version of Quick time and running an account with admin privilegs. I also opened the programm with admin power, just to see if anything happens, but still the same.
    My camera films in 1920 x 1080 25p, so I guess its proogressive. For the audio I dont care if its 5.1 or mono, because my microphone is a mono microphone.
    I made some pictures of my settings, sry all in german:
    [IMG]http://imageshack.us/a/img163/6105/rr3l.jpg[/IMG]
    [IMG]http://imageshack.us/a/img839/9284/nser.jpg[/IMG]
    [IMG]http://imageshack.us/a/img707/6420/0krg.jpg[/IMG]
    Greets Machun

  • Forum XML Export failure - user not found

    Hi,
    first, I know the export/import functionality is disabled by default in the jive forum version of SAP.
    But they don't provide any other mechanism to export forum content, so we have to use it.
    We want to export our forum content with the XML Export function.
    When I want to export the whole content, the error log shows following:
    2009.12.22 09:54:45 [error]
    com.jivesoftware.base.UserNotFoundException
    at com.sap.netweaver.coll.forums.ume.User$JiveUser.loadUserByIDFromDb(User.java:446)
    at com.sap.netweaver.coll.forums.ume.User$JiveUser.<init>(User.java:356)
    at com.sap.netweaver.coll.forums.ume.User.<init>(User.java:77)
    at com.sap.netweaver.coll.forums.ume.UserManager.lookupUser(UserManager.java:139)
    at com.jivesoftware.base.UserManagerAdapter.getUser(UserManagerAdapter.java:82)
    at com.jivesoftware.base.database.DbPoll.getUser(DbPoll.java:160)
    at com.jivesoftware.forum.proxy.PollProxy.getUser(PollProxy.java:47)
    at com.jivesoftware.forum.database.DbDataExport.exportPoll(DbDataExport.java:1643)
    at com.jivesoftware.forum.database.DbDataExport.exportPolls(DbDataExport.java:1624)
    at com.jivesoftware.forum.database.DbDataExport.exportForum(DbDataExport.java:1415)
    at com.jivesoftware.forum.database.DbDataExport.exportForums(DbDataExport.java:1330)
    at com.jivesoftware.forum.database.DbDataExport.exportForumCategory(DbDataExport.java:1305)
    at com.jivesoftware.forum.database.DbDataExport.exportForumCategories(DbDataExport.java:1112)
    at com.jivesoftware.forum.database.DbDataExport.exportForumCategories(DbDataExport.java:1101)
    at com.jivesoftware.forum.database.DbDataExport.doRun(DbDataExport.java:624)
    at com.jivesoftware.forum.util.DataExportServlet.service(DataExportServlet.java:120)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
    at com.jivesoftware.base.action.JiveAdminActionFilter.doFilter(JiveAdminActionFilter.java:37)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
    at com.opensymphony.webwork.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:189)
    at com.jivesoftware.base.action.util.JiveFilterDispatcher.doFilter(JiveFilterDispatcher.java:68)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
    at com.jivesoftware.base.util.webwork.JiveActionContextCleanUp.doFilter(JiveActionContextCleanUp.java:41)
    at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    But when I export the forums seperatly there are only a few which throws this exception.
    I looked up the usernames from the user who posted in this forums in the table JIVEUSER in the database. But they are all stored in it.
    Can I look up somewhere the username, that isn't found?
    Neither in the error log nor in the debug log I have found it.
    Best Regards,
    Manuel

    The error is caused to an authentication failure and is not an issue with authorization
    You need to look at your authentications policy (Policy->Authentications) and see which identity store was authenticated against
    In addition can do the Live Authentications page (Monitor->Authentications) and for the failing record click on the icon under details. This will give you the full details of the requets processing and you can see which rule was matched in the identity policy (Identity Policy Matched Rule) and "Selected Identity Stores".

  • MP3 Export Failure

    I am having some problems exporting from QuickTime Pro aiff to mp3. It gives me a failure: Failed (-50)
    I created the audio in Soundtrack Pro (which oddly did not give me the option to export mp3) and now I'm running into this. What can I do to fix this issue as I believe that I've exported just fine to mp3 before.
    Also, kind of on the same note, I'm getting QuickTime crashes when I try to export aiff. Hoping to figure out a way to repair these various issues very quickly as I'm behind on some work.

    Do you have Toast installed? There is some tool, can't remember which one, that includes an MP3 codec for QuickTime, but it only works from within the tool (licensing restrictions as the MP3 format is not freely available to compress).
    All that to say that with a normal plain install of QuickTime, MP3 is not an option for export.

  • Export failure in Keynote into QT–No Accuracy for timings–Software options?

    Hi There,
    I'm having a horrible time trying to export a presentation made in Keynote 2 into Quicktime. This presentation has audio embedded in the presentaion (not as an object on the slide) and also has quicktime movies (screen movies made with snapzpro) on the slides. (do these qwuicktimes have to be converted to MPEGS?)
    No matter which setting I use, it always gives me an error at the end of the export that either my disk is full or there is an error in the file. I have another presentation that has audio on each slide with no quicktimes on slides and the export function works fine (though through the export process the build timings are changed) . If I upgraded will this problem be fixed, it doesn't seem that these issues were addressed in the current version? Is the problem the audio embedded in the presentation itself or the use of quicktime files, should I change the movie format of those files?
    The other major roadblock I am having is the inability to accurately set timings. The builds and transition pre-sets can change easily (i.e. if you are plugged into an external monitor or LCD). The QT exports are even more unreliable. It seems that evertime I need to show the presentation I need to reset all timings in the room I am presenting in and based if I'll be plugged in, and even still no guarantees. If I could get it to export properly or at all in QT, I could just present throught there, but I can't.
    Am I just using the wrong piece of software for what I want to accomplish? Is there even a presentation software out there with this kind of functionality or do you have to move to apps like Final Cut? I am will be willing to make the investment if I know it will be succesfull.
    I'm really at a loss. Any suggestions would be much appreciated.
    Thanks.

    I'm having that same error! Have you found an answer for that yet
    it always gives me an error at the end of the export that either my disk is full or there is an error in the file.

  • Final Cut Pro DVD export failure?

    What does this mean?(com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
    Have had no previous problems exporting via FCP , sharing to DVD. To youtube ....... trying hard not to hate.

    OS X 10.9.5 3.5GHz Intel Core i7, 16 GB 1333MHz DDR3
    FCP 10.1.2
    Have burned 3.5minute DVD no drama, earlier did 1hour plus DVD, no problem also.
    Thanks

  • Export failure in Premiere CS5

    Jello,
    I am trying to export a large project (Full HD video of 134 minutes) and Premiere crashes when I am trying to export. If I try to export much smaller clips, I don't have problem.
    Would you happen to know what might be wrong?
    Thanks

    Sounds like an underpowered computer, if it is to pro tape just re transcode & re transcode and join up ?
    I liked the Russian, hope the translation is OK .
    Ie., Say small sequences  of maybe 30 minutes or smaller, we had a problem on a Pentium 4 3.2 Ghz hyper-threaded computer running premier Pro 1.5.1 ? In the end the production in HD looked very professional. With a XEON Quad Core 64 bit using a Nvidia Quadro FX 3800, even without hyper-threading we have not encounted  that issue .

  • IPhoto Export Failure - Crash

    I updated my iPhoto '11 this evening to version 9.4
    Opened iPhoto
    Clicked on an event
    Selected a few photos out of the event
    Clicked File
    Clicked Export
    And then my iPhoto window disappeared
    And a dialog box appeared that said
    "iPhoto quit unexpectedly while using the HPPhotoExportPlug-In"
    HELP!  I just want to be able to export some photos. 
    This just started with this new update

    Yes, I have a backup. I have restored 9.3.2 and the old library.
    iPhoto 9.4 chrashed (the window disappeared and the program closed) without any message.
    This is what I have found in the console logs - I actually have more crashes, this is the last one before restoring
    Exactly 50 lines ;-) Thank you for helping
    20/9/12 12:03:13.730 PM ReportCrash[1109]: com.apple.message.domain: com.apple.crashreporter.writereport.crash
    com.apple.message.signature: iPhoto
    com.apple.message.signature2: com.apple.iPhoto ||| 9.4 (9.4)
    com.apple.message.signature3: 45C4C7B947652434F1871A561C657D42
    com.apple.message.result: NO
    com.apple.message.summarize: YES
    Process:         iPhoto [1092]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         9.4 (9.4)
    Build Info:      iPhotoProject-701064000000000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [226]
    User ID:         502
    PlugIn Path:       /Library/Application Support/iPhoto/*/HPPhotoExport
    PlugIn Identifier: com.hp.imagezone.tab
    PlugIn Version:    2.3.7 (2.3.7)
    Date/Time:       2012-09-20 12:03:12.104 +0200
    OS Version:      Mac OS X 10.8.2 (12C54)
    Report Version:  10
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    *** CFRetain() called with NULL ***
    Performing @selector(showExporter:) from sender NSMenuItem 0x7a6d9b20
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.CoreFoundation                0x90e785ec CFRetain + 44
    1   com.apple.CoreFoundation                0x90f9752e __CFURLCopyFormattingDescription + 94
    2   com.apple.CoreFoundation                0x90e7df1a __CFStringAppendFormatCore + 16346
    3   com.apple.CoreFoundation                0x90eca74c _CFStringCreateWithFormatAndArgumentsAux + 108
    4   com.apple.CoreFoundation                0x90f3fa96 _CFLogvEx + 118
    5   com.apple.CoreFoundation                0x90f4117a CFLog + 58
    6   com.apple.CoreFoundation                0x90ec8270 CFURLCopyResourcePropertyForKey + 64
    7   com.apple.CoreFoundation                0x90ec6cbe -[NSURL getResourceValue:forKey:error:] + 78
    8   com.apple.Foundation                    0x99ae935e -[NSFileManager displayNameAtPath:] + 109
    9   com.hp.imagezone.tab                    0x1628cfce -[iZTask getTargetName] + 64
    10  com.hp.imagezone.tab                    0x1628c7e4 -[iZTask initWithDict:fromBundle:] + 357
    11  com.hp.imagezone.tab                    0x1628c4d5 -[iZServices addTasksFromBundle:] + 275
    12  com.hp.imagezone.tab                    0x1628c273 -[HPPhotoExport discoverServices] + 213
    13  com.hp.imagezone.tab                    0x1628bc38 -[HPPhotoExport initWithExportImageObj:] + 75
    14  com.apple.iPhoto                        0x00265f39 0x9000 + 2477881
    15  com.apple.iPhoto                        0x002609d7 0x9000 + 2456023
    16  com.apple.iPhoto                        0x00260b6c 0x9000 + 2456428
    17  com.apple.iPhoto                        0x0025daf5 0x9000 + 2444021
    18  com.apple.AppKit                        0x96b57058 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1251
    19  com.apple.AppKit                        0x96b35572 loadNib + 373
    20  com.apple.AppKit                        0x96b34b94 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 819
    21  com.apple.AppKit                        0x96d73afa -[NSBundle(NSNibLoading) loadNibFile:externalNameTable:withZone:] + 171
    22  com.apple.iPhoto                        0x0025e1e7 0x9000 + 2445799

  • PDF export failure

    I exported a three page pdf document, but the third page of the word document was blank; why?

    The PDF document was converted from a three (3) page .sch file (P-CAD 2004 schematic drawing) using Adobe PDF.  I am not aware of any hidden information.  The drawing was flat, that is no hidden links, etc.  Opening the created PDF using Adobe Acrobat Pro, the Word document was created using the following procedure: File -> Export -> Word Document.  It was saved to the local desktop.  The first two pages converted fine, but the third page had one three character text string.  I am not sure if the string was from the second or third page.

  • Export failure due to column length in DRM 11.1.2.1

    Hi All,
    We have migrated recently from 11.1.1.43 to 11.1.2.1 and the issue is with one of the exports
    In the earlier version you have the option of manipulating the column length inspite of the actual length set in the table column. This can be edited in the column options when the table is selected at the last option of export.
    Now the issue is i could see the length of the column in the 11.1.2.1 export option but i was unable to edit that length and reduce it to the required
    Viz., i have the column length of 80 set in the table and in the export it is restricted to 50 in the old version. Now i'm unable to edit this in 11.1.2.1
    Could anyone help me on this? I believe i may be missing some basics here
    Thanks

    In the earlier versions by default every property length is treated as 50 Characters while we export the data from DRM,
    Now in the new version we need to alter the table before we export based on the property length,
    Thanks,
    Murali

  • Custom Resources - FIM MA Export failure

    Hi,
    I have some custom resources imported into MV and now, when running FIM-MA Export, those resources are not created.
    In the sync service console (operations tab) I can see in the "export errors", this: "...No policy grants the Requestor permission to complete all changes..."
    I opened the request in the portal and saw that it has no MPRs in "Applied Policy" Tab.
    Although the requests created in the portal UI are succeeded (they have an
    admin account and an applied MPR).
    What should I do to have the "Built-In syncronization account" be able to create those custom resources?
    Please note I'm a developer, not the administrator who created the resources, so walkthrough docs/articles are welcome.
    Many thanks,
    DD

    You should create two things:
    1. Set (criteria based) of all resources of your new type.
    2. Management Policy Rule in FIM Portal that would grant "Built-In synchronization account" rights to manage all attributes of members of Set created in point 1.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • Lightroom 3.2 catalog export failure "Photo previews could not be found"

    I just attempted to use  File > Export as Catalog... on my notebook. After the export completed a message was generated that reported Photo previews could not be found. (997) and listed all of the missing previews. I reviewed a random sample of the listed file names and the previews clearly exist. The LR catalog on the notebook contains 1596 photos in 17 folders.
    I would really like to move these photos to my desktop's LR catalog without having to recreating the previews.
    Can anyone help me with this issue?
    Bain Lothian

    Lr occasionally does this when it determines that there is an issue with the original previews. Typically, this would be were the previews had been created in a version prior to Lr3.
    Have you tried opening the exported catalog? If not, do so as the previews may well have exported. If if they haven't it may be best to recreate them from scratch. If nothing else it will give you some reassurance that there's been no corruption.

  • Premiere Pro CC 2014 RAM issues, audio dropouts and export failures

    So I've upgraded to PP CC 2014, it worked fine for a while. Then I've noticed that while editing audio starts to dropout (I'm getting PP system message in the low right corner). I tried to dig up some info on the subject, but the only explanation I see that after couple of hours of editing PP eats up nearly all of my RAM.
    Any solutions?
    My specs:
    i7-2600K 3.4 GHz
    Quadro 2000
    32 GB RAM

    Take a look at your GPU usage with something like GPU-Z to see if both Premiere versions are using the same amount of MPE GPU hardware acceleration.  Actually with CC 2014 it might work faster because Adobe added in more 4k effects/features for GPU acceleration.
    You might want to download our Premiere Pro BenchMark (PPBM) and run it on both versions.  The H.264 very complex timeline has 4K material in it and usually shows Premiere Pro 8.xxx take about only half the time that Premiere Pro CS6 take to export that same timeline.

  • Export Failure

    I am having trouble exporting image versions from some of my projects. Some projects allow me to export as I normally would while others give me an error message: "Export Versions Complete with Errors . . . The export operation failed to create an image file for the version identified below." In the projects that won't allow me to export, I am also unable to open the images for editing in PS.
    A few days ago I accidentally removed a hard drive without properly ejecting it. Could this be the problem and if so what is the remedy? Restore library?
    Any help is greatly appreciated.
    Thanks,
    Ryan

    Problem solved. The problem must have occurred when I improperly removed a drive. Aperture and this drive were not communicating so I am reconnecting the referenced images to their masters. Time consuming and tedious, but a solution.

Maybe you are looking for

  • Migration from BW 3.x to BI v7.0 Analysis Authorizations

    Hi All! We are converting our security from BW 3.x Reporting Authorizations to BI v7.0 Analysis Authorizations. My questions are as follows: We you make the IMG change in BI v7.0 in IMG transaction RSCUSTV23, does your old BW Reporting security disap

  • Restore to 6.1.3 from 6.0.1 error?

    I have an iPad 2 Wifi (A1395) with version 6.0.1 installed and I want to restore it to version 6.1.3. I downloaded the 6.1.3 iOS and selected that version through iTunes to restore to but I keep getting the error iOS: Restore error 3194 or 'This devi

  • Usability of Connection Managers and Packages across different development users

    Hi All, I am new to SSIS. Currently we are doing the development in SSIS 2012 using the SQL Server Data Tools and there are two different Windows users who login to the server to work on SQL Server Data Tools. We have created one SSIS project and und

  • WLSE redundancy errors

    I have enabled redundancy between two WLSE Express 1030 version 2.13.1, but it fails to copy the database and the config files. I have the errors: - Failed to backup database - Failed to backup config files Connectivity between them seem to be ok, be

  • Cover image disappears completely

    Trying to preview my book, I find that the cover image a jpg disappears when the pdf is produced. I can see it in the application but not in the pdf. Any ideas? Makes it very hard to know if and when to publish.