Export file disappears after exporting

Export file disappears after exporting
Tried dataexport(calc script), report script,need du=ynamic calc members too..
its urgent now....please help
But I have lots and lots of dynamic calc members...its huge...will take hours together to change...so I planned to make stored for only those members which are required in export file...but now...It seems that default calc is not getting executed... may be that happened because I changed few member properties...
Any thoguths why now dynamic calc is not working?
Thanks a lot for any help..its really urgent now...

Regardless of which limited export process you are using (dataexport calc script, report script, or MaxL/Esscmd export) I can't imagine the export file disappearing if it in fact gets written out at all.
As rinku wrote, if it's a true Esssbase export it's either in the app folder or where ever you wrote it with MaxL/Esscmd.
There are known issues with dynamic calc and dataexport. I've seen this myself and ultimately gave up on exporting the dynamic members. Yes, your changes could cause your exising aggregation scripts to give different results.
How about this:
1) Reduce scope of export process and remove dynamically calculated Accounts/Periods (a guess on my part, but likely right)
2) Export to known location (app folder under Essbase folder or some server-addressable folder). Btw, how are you doing the export? It wasn't clear from your post, but I guess it doesn't really matter.
3) See if that works, and if so, expand until failure. That will tell you what is and isn't going to work.
Regards,
Cameron Lackpour

Similar Messages

IMovie 11 - Export Using Quicktime - File Disappears after Export......

Hey everyone:
I've got a weird one here. I've made my first project using iMovie. I want to burn a DVD, so I clicked >>Share >> iDVD and it comes over fine. I then setup a menu and stuff and burned it. However, when I play it on my 52" plasma, it doesn't fit correctly. It fills the screen, but it's almost like it's zoomed in so it cuts off of ALL edges.
So I did some research and found this post and went to try it out. So within iMovie, I click "share using Quicktime" and change some of the various settings and export the movie as a Quicktime (.MOV) file to my "Movies" folder. The movie is about 55 minutes, it says it'll take about 35 minutes to export.
35 minutes later I come back and the export box has closed, iMovie is still open, just like it should be, and the file I just exported is nowhere to be found. It just disappears. The second and third time I tried, I open a Finder window and watch the file get created, then get larger, and larger. But once it's done, the file is gone.
So then I created a new project and made a movie that was only 10 minutes long. It exports fine and the file is there when it's done. In other words, I can't replicate the problem with a new project. However, I have a lot of time in editing this movie and don't want to start over for fear of finding the same result.
What should I do?
Thanks!

I have this same problem and there are several threads running about it. I have the paid-for version of iMovie, and cannot even get it to export a Quicktime movie. This makes it even more useless than I already find it to be. I spent the last two days working on a video, and for me to send it to my client, I would have to freight my computer to them so they could view it.
<Edited by Host>

Do my files disappear after the 30 trial of Acrobat Pro?

Do my files disappear after the 30 trial of Acrobat Pro?
Thank you,
Ed

No. You just can't use Acrobat on your computer anymore (unless you buy it,
of course).

InDesign CC: Text in editable text fields disappearing after exporting

Hi,
I'm having an issue of text disappearing from editable text fields after exporting the document as an interactive pdf. I've created the text that needs to be editable in acrobat with InDesign CC. So for example, I want to have an editable text field that already says "I'm Mary." I want users to have an ability to change "Mary" to "Tom" or "Ben" in Acrobat. So the pdf should have an editable text form saying "I'm Mary" sentence when users open the pdf in Acrobat. However, after exporting, the text fields remains but the text itself "I'm Mary." is gone. I don't understand why this happens because the text is there when previewed in SWF preview window in InDesign.
The below is the list of steps I took.
STEP 1: Create some texts (For example, m with the text frame tool in InDesign CC
STEP 2: Right click the frame, and click on "Interactive > Convert to Text Field"
OR
STEP 2: Select the text frame, open "Buttons and Forms" window and change the type as "Text Field"
STEP 3: Export the document as an interactive pdf. The setting is default.
Result: When I open the pdf in Acrobat, the text field is there, but it is blank.
Please help me to resolve this issue. I know this is possible because a person before me at my job did it.
Thank you!

As far as I know, to have a pre-populated text form [I'm Mary] appear in the text field, you will need to set the Default Value of the text field in Acrobat. You can do that by selecting the property of the field > Options > Default Value

EA2 export data disappears after error

The export data menu item in the result set context menu disappears after you created an error. E.g. after sending the following statement:
select dummy|| dummy|| dummy|| dummy|| dummy|| dummy from dual;
The call of "export data" raises an error message that the identifier for the column is too long. After that, the menu item "export data" is gone.
Regards,
Sven

Skutz,
Thanks for the response.
Yes, the problem with the export menu option disappearing is fixed with EA3.
As to when the error with the long column names not being able to be exported was previously fixed, I saw the problem (ORA-00972 with the example query given) from versions 1422 through 2579, but not in the subsequent version (2998?) where it was fixed to not cause the error.
On not wanting to rewrite my original base query - SQL Developer is already rewriting it, which is what is causing this problem. I assume the rewrite you are doing simplifies the case where only some of the columns are exported.
My query is, for example:
select dummy|| dummy|| dummy|| dummy|| dummy|| dummy from dual
This runs fine and produces the expected result. SQL Developer's query for exporting is (from what you have said), in that example:
select "DUMMY||DUMMY||DUMMY||DUMMY||DUMMY||DUMMY" from
(select dummy|| dummy|| dummy|| dummy|| dummy|| dummy from dual)
This fails with the "ORA-00972" error, preventing me from using the export functionality for a query that I can run successfully.
I know that the work around is to provide an alias for the column, but the fact that I can apply a work around to my query doesn't change my opinion that it is SQL Developer code that is doing the wrong thing with my query (a bug to me) that is preventing me from being able to us the export functionality for that query.
It is a relatively minor thing, but another example of something that you would expect to work (it certainly does in TOAD) which takes some of the shine off a basically good product.
theFurryOne

File type after exporting film to itunes (windows pc)

Hi, after export a film to itunes (Windows PC) i can not open this file with the suffix .iMovieMobile. What is this for a type? How can i open it? I want to bun it on video dvd. Could i convert it? kind regards, lotropp

You are incorrectly exporting it.
You have exported the project; there is an export project option and this is what you have done.
You need to export to camera roll, then import as you would photos from the camera app.

Does adobe captivate subscrition exported file expire after the subscription expired?

I already used Captivate trial version and planning to purchase the monthly subscrition verion. The .cp files expired after the trial time ended.
What happens, if I purchase Captive subscription for two month, export and deliver projects for my clients and do not renew my subscription, cause there is no project at all for half a year?
Does these deliverd .cp files expire and not usable for my customers?

I already used Captivate trial version and planning to purchase the monthly subscrition verion. The .cp files expired after the trial time ended.
What happens, if I purchase Captive subscription for two month, export and deliver projects for my clients and do not renew my subscription, cause there is no project at all for half a year?
Does these deliverd .cp files expire and not usable for my customers?

Media Disappears After Exporting to Soundtrack Pro

I have an HD project I'm working on that was shot on the HVX200. The files have been converted and imported into FCPS2 and the edit went fine. Then I tried to export the sequence to Soundtrack Pro for audio editing and clips started disappearing from the drive. The only solution I have found is to re-convert and import the files.
This has happened twice now and all the same files. What's happening? Does anyone know of a way to prevent this?
Message was edited by: Marc Buhmann

Reports of this strange file disappearing behavior surface every few months and almost always involve having both apps (STP and FCP) open at the same time. Speculation has been that somewhere in the round trip, FCP gets confused and believes the original files are renders and are deleted. And when FCP deletes something, it is gone.
The work around has been to make sure that both apps are not running at the same time - i.e. export your file from FCP then close FCP. Launch STP, make changes then export back and close STP. Launch FCP, import edited file back in and continue on your merry way.
This is a pain for certain. The other way is make sure you always have a set of the media stored offline (which you would anyway with P2 sourced files) and simply do an offline/online reconnect when the files go missing.
Good luck.
x

QuickTime mov file disapears after exporting !

After having done this successfuly a number of times, when I try to export a FCP4 project using QuickTime conversion, the sequence renders all the way untill 100%, but the box does not close and the file just disapears... however it's space is used in the hard drives... Can someone please help ?
Powerbook G4 Mac OS X (10.3.9) Power Mac G4 450Mhz 0S 9.2.2

Hi Brian
thank you so much for your help !
I still don't fully understand waht really happned...
But I think the problem was solved...thanks to you.
I firstly tried to do exactly what you suggested: Exported the project as QT, then quited FCP, dragged the file into Compressor's Batch window, told the compressor to make a MPEG2 frm it... and here it stoped working...Submit ws subdued and I could not make it work...Then I took a look at the file QT had exported...it was a 303Mb FCP movie, not a QT.mov file, and the sequence was about 4.5 Gb !
Here I tried something else:
First, from FCP, Printed the sequence to video. Then captured it to FCP again to a new project, through Log and Capture, this time it did not need rendering and in the Capture Scratch folder after saving the new project was a QT.movie file; Dragged it to Compressor and made a MPEG2 file...
On the phone with the project's author I heard for the first time the original QT.mov files he gave me were in fact exported from iTunes under MacOS 9.2...I don't know if this can mean anything, since I have worked before with QT files exported from iTunes with no problem...
Can you please give me your insight about all this ?

No DMP file created after Export

Hi All
I am trying to export MyDB schema on OMS as a dmp file. After completing the Export Wizard, the message says "The job has been successfully submitted. You can view the status of the job in the Active Jobs pane of the Enterprise Console Manager". I am using Oracle 9i. I don't get any ORA errors or what so ever when I run the Export Wizard.
Then when I look in the c:\oracle\oracledata\MyDB there is no DMP file there.
Am I missing any steps here in order to create the dmp file besides running the Export Wizard.
Any help deeply appreciated. Thank you in advance.
Sincerely Solongo
Message was edited by:
Solongo

Dear All
I have sorted the problem.
I had assign "Logon as Batch Job" policy on Local Security Policy to a Windows User "Solongo" that I am currently logged in as, and logon to OMS and set the Preffered Credential as "Solongo" and ran the Export Wizard. Guess what, now I have export.dmp file residing on c:\oracle\oracledata\MyDB.
Thank you all

Formatted fields disappear after exporting to Infoview

Hi Experts,
In my CR2008 report file, I have date fields which are disappeared after opening in Infoview.
Here is an example of the formatted date field:
{@StatementDate} =
if {@Timezone}="EST"
then cstr(dateadd("n",(5+{?Offset})*60,),{?DateFormat})
else if {@Timezone}="EDT"
then cstr(dateadd("n",(4+{?Offset})*60,),{?DateFormat})
{@Timezone} : This formula field checks if the PrintTimeZone falls in Daylight Savings or not and returns either EST or EDT
Similary, another formula field uses CurrentDateTime and returns the report run date in user timezone based on the {?Offset} value.
When {@StatementDate} is used in the report in CR2008, there is no issue. Everything comes up correctly. When the same report is opened through Infoview, the {@StatementDate} field is showing blank.
Please suggest at the earliest .Thanks in advance.
Regards,
Naresh

HI Jamie,
I've tried your suggestion. When using the Timezone formula to display in Infoview, it's returning 'E' instead of 'EST', where actually the formula is failing.
Timezone formula is based on PrintTimeZone function of CR2008 to extract the abbreviated form of the User Timezone who logs in and runs a report. So, it checks for daylight savings and returns the abbreviated form like EST or EDT or IST so on.....
In Timezone formula there is a loop which tried to extract the first character of the PrintTimeZone function and returns the abbreviated formula. If PrintTimeZone is Eastern Standard Time, -300, Daylight Saving, -60, 03.0.0 2:00,11.1.0 1:00, it first checks whether the current month and date falls in Daylight Savings or not and returns True if Daylight Savings, Then, it returns EST or EDT. This works for all the TimeZone across the globe
So, in Infoview, it returns 'E' and failing to extract the rest of the characters to form EST or EDT. Any clue as why this could happen? For now, I've hard coded the formula to return EST or EDT depending on the Daylight savings true or false.
Thanks
Naresh

Quicktime X file disappear after convert it.

I have a video on .mp4 format, open it on Quicktime X then use the "save as" option to convert this file to an iPod format. Usually takes about 30 minutes. The weird thing is that if I leave the computer running the process and get back later, the file disappears.
When the conversion starts generate an icon on the desire destination. But apparently if you don't manipulate the file right after the conversion is done the file just disappear.
Does anyone had the same problem before? Any Idea how to solve it?
The thing is that I don't want to sit in front of my computer to wait until the conversion is done, just upload several video and used them once they are all ready.

Hi Brian
thank you so much for your help !
I still don't fully understand waht really happned...
But I think the problem was solved...thanks to you.
I firstly tried to do exactly what you suggested: Exported the project as QT, then quited FCP, dragged the file into Compressor's Batch window, told the compressor to make a MPEG2 frm it... and here it stoped working...Submit ws subdued and I could not make it work...Then I took a look at the file QT had exported...it was a 303Mb FCP movie, not a QT.mov file, and the sequence was about 4.5 Gb !
Here I tried something else:
First, from FCP, Printed the sequence to video. Then captured it to FCP again to a new project, through Log and Capture, this time it did not need rendering and in the Capture Scratch folder after saving the new project was a QT.movie file; Dragged it to Compressor and made a MPEG2 file...
On the phone with the project's author I heard for the first time the original QT.mov files he gave me were in fact exported from iTunes under MacOS 9.2...I don't know if this can mean anything, since I have worked before with QT files exported from iTunes with no problem...
Can you please give me your insight about all this ?

Downloaded files disappear after download finishes

I downloaded a file from several locations. Mozzila backup, evernote and other downloads
The download finishes, but the file disapears afterwards from my system and can't be found back.
The download should be on the location as requested.

I have this problem too, I have selected the downloads folder, when the download is finished it disappears, I have done a search of the files, and they simply are no longer on my computer. How do I fix this. I looked at the above articles and all that was suggested was to change the strings, but didn't say what to change the strings too. I have already deleted firefox and then redownloaded it and reinstalled it. How do you fix this?
I have reset everything to default, I have eliminated cleared the database, cleaned the registry, reinstalled and the files still disappear after they are downloaded
I have done the steps here: http://kb.mozillazine.org/about:config
and this one and still nothing: http://kb.mozillazine.org/Unable_to_save_or_download_files

.Exe file disappearing after use Windows 7

So I have a .exe in a folder that after opening the .exe and closing it again, (It's a Ren'Py game), the file disappears.
If I try to extract the game again (It's in 3 zips) into the same folder I get Access Denied from the .exe. It is not a virus, my antivirus hasn't reported doing ANYTHING to a file or folder (I even manually scanned it and it said it was fine). I've set the
permissions to full access, and I'm the owner.
I have no idea why it is doing this. Anyone have any suggestions?

Can you try a different product and check ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

PDF files disappeared after upgrade to Win7

Copied folder with XLS, DOC, PPT and PDF files to a shared server. Upgraded workstation to Win7. Copied folder to new Win7 workstation. All the Office files are there, but none of the PDF files. Help! Tried to ReIndex, no change. Why would just the PDF files disappear?

yes, but hopefully you deactivated your previously installed adobe programs.
if so, you can install your upgrade programs using your original serial numbers and activate your programs.
if you cannot activate your new installs (becaues you failed to deactivate your previously installed programs), you'll need to contact support.
i've found the help via chat is easy-to-use and quick.

Export file disappears after exporting

Similar Messages

Maybe you are looking for