Export fonts used in PSD

I'm trying to concieve of a way to copy the fonts used in a psd file from the 'C:\WINDOWS\Fonts' folder to a 'Fonts' folder in the same location as the PSD.
Essentially, I want to be able to "package" a psd file like you would in InDesign (minus the links).
Can anybody think of a way this would be possible to make into a script/action? We share files around the office at which I work at and I often forget to copy font files I use into the working folder and, of course, the person who needs to open the psd doesn't have the font.
Any help greatly appreciated.
Thanks,
Matt

This thread may be of use..
http://forums.adobe.com/message/2191661#2191661

Similar Messages

Export fonts with PSD

I would like to know if there is any option in photoshop where you can save a PSD file and it automatically saves the fonts used in that PSD. I’ve seen such an option in Corel Draw where you prepare a document for print and it includes all the fonts with that document.
A.Zeb
http://www.argusvision.net

OK, I'm out of here. Just waiting for my forum abuse email from the moderators.
Seems if you're cited three times, you get <Humble Pie> Thiry days in the hole....</Humble Pie>
Couldn't resist:
Hello,
Though the content you posted below was reported for abuse, it has been approved by our moderators:
Subject: Re: Export fonts with PSD
"...and make up silly claims about abuse"
Hello,
Though the content you posted below was reported for abuse, it has been approved by our moderators:
Subject: Re: Suggestion needed about scanning newspapers.
Marian: time for HRT and valium.
Posted: 8/21/09 11:00 AM
Thank you for participating in the Adobe Online Forums.
Like I'm a kitten going for a ribbon, sloppy attempt at misdirection.
Posted: 9/2/09 11:14 AM
Thank you for participating in the Adobe Online Forums.

Getting Fonts Used in a PSD

I'm trying to script some font swapping in PSDs. It mostly works but I discovered a situation where it breaks. If multiples fonts are used on a single text layer, only the first font is listed. I don't know if there is a workaround for this. I've not found one thus far.
Here's the code I'm using, which I borrowed from a list archive somewhere:
tell application "Adobe Photoshop CS5"
     tell the current document
          set Used_Fonts to {}
          set Text_Layers to every art layer whose kind is text layer
          repeat with This_Layer in Text_Layers
               set This_Font to font of text object of This_Layer
               if This_Font is not in Used_Fonts then
                    set end of Used_Fonts to This_Font
              end if
          end repeat
     end tell
end tell
Used_Fonts
Thanks in advance for any insight into another method to get this info.
Stephan

Does it need to be an Applescript solution?
The only way I know to get a list of fonts used in a single text layer with multiple fonts is by using Action Manager to get the textItem's descriptor and search the textRanges. Applescript can not use Action Manager directly and I can not recall the way to pass the fonts from javascript to Applescript.
I can post a javascript/Action Manager function if it would help.

Why do I get scratchlike glitches when exporting from ai to psd files?

When I Export from ai to psd files, there are occasional horizontal dashes---one pixel high---of blank pixels. See an example:
I had no problem with CS 2; the problem only emerged when I upgraded to CS5.

Your example isn't showing up. Use the camera thingummy on the reply window.

How can I change the fonts used in Yosemite

It would appear that Apple have gone out of their way to make OS X as difficult to use as possible with the change of fonts colours. To make matters worse it would appear we all have to adhere to the Apple accessibility rules if we want to change anything ! Guys, the world is more complex.
I don't have any visual impairment as such other than I'm in my 50's so i'm in that vari-focal time of life, which is normal. That means a bit more definition on the font helps - so I'd like to change the font & maybe the font size across the entire system. I can do that in M$ Windows !
I'd like to change the colours of the fonts used in some applications e.g.. Mail where for some completely mad reason Apple are using a grey font, on a grey background, a mustard font on a white background. MAD. What idiot comes up with this stuff & who signs it off ??????? Once again all this is easy to change on every other OS I've worked with (Solaris, Linux, Windows).
Now you might think that I'm Apple bashing, I guess I am in a way but I've been an Apple user for more than 15 years, I have iMac, Macbook, Macbook Pro, Macbook Air, 3 iPads, iPhone. I like the products but things are not as configurable as they should be. Just allowing people to click a couple of radio buttons to switch to different modes on the display DOESN'T cut it.

Too old to care now.

Is it possible to replace fonts used in a PDF?

Hi. I have a PDF that was created by a third party. I contains a couple of fonts that are not available on my system, and for some reason they won't swap for other fonts. When I open the PDF I get the message "Cannot find or create the font 'WP-MultinationalBCourier'. Some characters may not display or print correctly."
Although the PDF looks OK to me, it won't print on the printer down in the print shop. (That printer is very fussy and will not print PDFs unless the font situation is perfect.)
I can't even tell where this font is used. It's over 500 pages, so I can't check every paragraph. I do not have access to the source files, and going back to the third-party (who created the PDF) is not really an option.
My question: Is there a way that I can force Acrobat to swap out the 'WP-MultinationalBCourier' font and replace it with some regular font? As in, on a permanent basis, so the print shop printer won't ever know that odd font was used?
Thanks
e
d

Hi Ed
I used to spend hours working out the same problems. There's good news and bad news. First though -- what version AA are you using.
Bad news is, unless you can get hold of the exact fonts used to create the pdf -- and then put them on your system -- there will not be much you can do, unless AA has vastly changed their procedures.
Even if you get the exact font and add it to your system, I am still not sure AA will "see" it, depending upon if the font was originally embedded into the pdf or not, when it was made. Logically, it would appear that if not embedded the program would recognize it on the system. But, unfortunately, this has not always worked for me and I do not know why myself.
Unless your required font is something like Hebrew or Chinese, the program will automatically replace your courier to the next likely (internally programmed) selection, so you will not notice any problems. (my experiences & problems were always with foreign languages)
You can replace a font or make a correction by blocking the sentence or word, then using your right-click context menu, then selecting Font, and making the replacement.
Perhaps the best way would be so save the file as another .doc file and start all over again, but with the font your printer will accept?
Is that an option?
let me know.
BarryG

Can we use Data Pump to export data, using a SQL query, doing a join

Folks,
I have a quick question.
Using Oracle 10g R2 on Solaris 10.
Can Data Pump be used to export data, using a SQL query which is doing a join between 3 tables ?
Thanks,
Ashish

Hello,
No , this is from expdp help=Y
QUERY Predicate clause used to export a subset of a table.
Regards

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4 I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their

I have a MacBook Pro , Model Identifier MacBook Pro8,2 , MAC OX S 10.7.4
I noticed that if I open Final Cut Projects created on other/older models MacBook Pro Laptops or MacPro Desktops, the fonts used in the previously created FCP projects, change their font spacing! which distorts the look of the Text that was written, by oevrlapping on other things that were put & present on the screen.. Another similar probelm is that the Vector shaped used for example to highlight certain words or shapes, also change their position on the screen so that they no longer highlight exact things that we once used these vectors to highlight or outline... Anyone knows how to solve this problem please?? I made sure that the same fonts are available in the Library in both old and newer computers...
thanks in advance..

You might want to take your question to the FCP forum - if you copied all fonts to your Library>Fonts folder and restarted they should be recognized by all applications. I know that this works for Adobe products, anyway.
Clinton

Is there a way to locate file path of a font used in text layer?

I delivered a file to a client and there is a missing text layer dependency.
I thought I delivered the correct font for the text layer but there is an issue somewhere...perhaps multiple versions of the font on my system..or slight
difference in the font name. The project loads without the error on my system.
Is there a method within After Effects to obtain a file path for the font I am using? ..or at least a way to get more detailed information
about the font itself?...I mean beyond what is available in the font selection window.
I need to locate the exact font in the exact folder After Effects is pulling it from.

even better..I did a search within Fontbook for comparable file name..as I don't add and remove fonts constantly
and discovered the font and also discovered why there was confusion in AEFX..the font had been generated in
Fontographer and it's file name did not match error prompt or collected file report
that was better than suffering through the 100's of possible results I was getting in Finder. And Fontbook also provided the path to the exact font used...
..feeling a bit silly...but I think this will work.

Fonts used in some text layers not available...

I've been gettting the following message lately when opening Photoshop files at work: "Fonts used in some text layers are not available for activation. You will need to replace these fonts before the layers can be used for vector based output".
But when I check my text layers, there are no indications that any fonts are missing. I double click on every text layer to see what font is being used and double check Suitcase Fusion to make sure it is activated.
I'm using OSX Maverick 10.9.2. I'm using Suitcase Fusion 5 version 16.2.0. And I'm using Photoshop CC 14.2.1. It's more of an annoyance than anything, but would like to know why it keeps telling me fonts are not available when they are currently activated in Suitcase. Not sure if it's an Adobe issue or a Suitcase Fusion issue.
Anyone have any ideas on this?
Thanks!
Steve

DrStrik9, I opened up the file, clicked on each text layer and selected all to make sure there wasn't any character using a different font. There wasn't. I clicked on the font being used, tried changing it to a different font, then back to the font that was being used. I saved and closed the file, then reopened it, and that seemed to cure it for that file. Not an efficient way to go about it though.
I then tried another file that was giving me the same error, clicked on each text layer, changed the font to a different one, then back to what was being used, saved, closed and reopened it, and still got the same message. So it didn't work for that one. I then tried changing the font to a system font, Times Bold true type, saved, closed, reopened, and got the message again. So not sure what is going on. The fonts used in the first file were DIN and DINEngschrift postscript font, which were loaded and active in Font Fusion.
The 2nd file I tried was using Gotham Bold postscript font, which also was active in Font Fusion. I've run Font Doctor on the fonts and found no issues.
Even though I'm getting the error message when I'm opening these files, none of the text layers have that Exclamation point indicating there is an issue with the layer, so it would seem the text layers are fine. Just really annoying to get that error every time I open the file.
Another thing I tried is I created a new Photoshop file and just made some text layers using Gotham Bold. Saved, closed and reopened the file and did not get the message. So, I don't know why I would get it with one file and not another. Very confusing/frustrating. Any other ideas?
Thanks in advance,
Steve

Can't export .MOV in AE cc render queue, But I can Export .MOV using Media Encoder cc

I get “[file path and name].mov”. An output module failed. The file may be damaged or corrupted. (-1610153464) when trying to export .mov using AE cc render queue but works fine in media Encoder cc. My problem is that i need to export animation with alpfa channel for a client and cannot find an alpha channel option in media encoder.
Please help

To export with an alpha channel in Adobe Media Encoder, choose "32 bit" from the Depth menu under the Video tab in the export settings. (That refers to 32 bits per pixel: 8 each for R, G, B, and A.) Of course, that option is only available if the codec can include an alpha channel, such as with the Animation codec in a QuickTime container.
To deal with QuickTime problems with After Effects CC (12.0), start here:
http://bit.ly/QT_AE_CC_12

How to install new fonts using code in java?

Hi,
How to install font in a system using java, provided i know the font file's address. Is there any specific class/method available for this purpose? Copying the file to windows/font directory will work for windows, but I think it wont be generic to all operating system. So is there anyway to install a font using code?
I also want to know how to make the font available only until my application window is open, It must be available to all other external applications like photoshop, word etc., When I close my window it must un-install automatically or be made not available to other applications. Any suggestions? Please do help! Thanks in advance...

I have already tried the above, But the font created using input stream is available only to my application* and is not viewable in photoshop.*. I realize this. Like I said, I know of no method that will register/deregister the font with the system. You'll have to create your own method that takes the operating system into account.
String os = System.getPropery("os.name");
if(os.equals("Windows Vista")) {
}else if(os.equals("Windows XP")) {
}else if(os.equals("Windows NT")) {
}else if(os.equals("Solaris")) {
AIX
Digital Unix
FreeBSD
HP UX
Irix
Linux
Mac OS
Mac OS X
MPE/iX
Netware 4.11
OS/2
Solaris
Windows 2000
Windows 95
Windows 98
Windows NT
Windows Vista
Windows XPYou'll need the standard font directory for each system. I think all the window ones are C:\Windows\Font\ . Each OS probably has its own little quark (like having several font directories or throwing different security exceptions). Undoubtly it's going to require some research and a bit of trial and error. You can probably work some magic with Runtime.exec(...) as well.
The alternative would be to google for some libraries that offer similar functionality, or promt the user for the system's font directory and save the location of the directory in a file somewhere for future use (so the user dosen't have to specify the font directory everytime he/she starts up the application).

Dante font used in manuscript - when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

Dante font used in manuscript … when I try to save as a pdf document in Microsoft Word whole pages change their look, with wide gaps forming between certain paragraphs or sections. This does not happen with other fonts.

OK, we've got it!
What is happening is that when you use Microsoft's save as PDF in Word, the font isn't embedded even though the font is tagged to allow embedding. Furthermore, Microsoft doesn't properly put the font name into the PDF file such that Acrobat or Reader can readily find the font installed on your system such that the text can be properly displayed and/or printed. Acrobat and Reader attempt to display and/or print the text using a “substitution font” and of course, as they say, YMMV (“your mileage may vary”)!
I personally submitted the report of this problem (both the embedding and the font name problem) to Microsoft. They acknowledge the bug, tried a fix and provided me a build with it, but it wasn't right. Maybe they will ultimately fix it, maybe they won't. We don't know yet. We do know that if it is fixed, it will be fixed only for Office 2013 (problem occurs with all Office applications since they use the same PDF generation code) and thus such a fix won't help you.
Adobe Acrobat Standard and Acrobat Pro both provide an Adobe PDFMaker plug-in to Office applications (including full support for Office 2010) that adds an Acrobat Toolbar as well as a Save as Adobe PDF menu item. The resultant PDF file fully supports embedding of OpenType CFF, TrueType, and Type 1 fonts and in many other ways produces much superior PDF with a full range of PDF generation options not available with the Microsoft PDF. (Note that beginning with Office 2013, Microsoft does not support Type 1 fonts in Office documents at all, even for existing documents!) The Acrobat Office functions are widely used and respected in the end user community and whatever “issues” there are (all software has “issues” of some type - it is a matter of how many and how severe), you should be in much better shape for PDF production that with what you currently are using.
Good luck and let us know if this resolves your problems. (Note that you can download and install a free fully-functional 30 trial of Acrobat Pro to assure that it meets your needs! You can then buy a license and activate what you already have installed.)
- Dov

CS2- How to get the fonts used in a document ?

Hi,
Can anyone tell how to find the the fonts used in the document directly without iterating through the text art used in the document.BCOZ if i iterate through each text frame or character my plugin works very slowly.I want to speed up the process of finding & replacing the fonts like wat we do manually in the "Type-> Find Font" menu thru my code.
Please post ur comments on this .If there is no direct option to find &replace the fonts used in the document ,pls let me know the simplest logic of finding & replacing all occurances of a font in a doc so that my process of doing this should be faster.
Thanks in advance.
myRiaz

As far as I know, there's no way to get a list of fonts in use in a document without iterating over the document and compiling a list by asking every piece of art.
If you want to trigger 'Type > Find Font' there might be a way to invoke that using Actions (AIActionManager.h). I'm not sure if that would help or not though.
This probably isn't very helpful depending on what you're doing, but I think this is meant to be handled by using character styles. That way you can change a style and update any related text instantly. Not much help though if you're just trying to write a S&R font plugin.

Programmatically list the fonts used in a PDF

Hello.
I want to make a list of all the fonts used in a PDF. After reading (again) the ISO-32000 standard, I tend to think that the only way is to cycle through the pages and list the fonts used in each one.
Is there any other (and faster) way to do this?

Nope - that's the only way.
And don't forget, that you can NOT just look at the Page's Resource dict. You need to do a full recursive walk down the content stream finding all graphic objects that themselves have resources. Oh, and don't forget Annotations!

Export fonts used in PSD

Similar Messages

Maybe you are looking for