Export for Apple TV with Date?

I have over 70 home movies dating back to 1952 in the latest version of Final Cut Studio that I want to export to Apple TV and I need the title and date (year) to be displayed. I cannot get the date to show up in Apple TV reliably.
I export from Final Cut Studio using Share and then Send to Compressor where I use a custom Apple TV setting which just exports in SD without any audio. The resulting m4v file is imported into iTunes and viewable with Apple TV. On Apple TV the title shows up for each movie but no date (release date?) is listed. Since these movies date back to 1952 I want to have the date displayed (I don't want to include it in the title text).
I have set the year in iTunes, can't find out how to set the date in Compressor, set the date with MetaX, Lostify, etc., but the date never shows up on Apple TV.
I have searched these forums and the internet but have not found a solution that works. Can anybody offer any suggestion on how to reliably set the date?

Hey Jeff, I realized that you've marked this thread Answered but, in case it matters, the issue with retagging files already imported into iTunes is a known issue (For whatever reason, the iTunes Library Database file doesn't update the metadata when a file is retagged externally.)
What many of us (iTunes nerds) do is delete the file from our iTunes library, retag externally, then Add to Library in iTunes.
That's the most foolproof way, though sometimes after retagging externally (and not having removed beforehand) a simple Get Info in iTunes does the trick. But that fails a lot for me personally.

Similar Messages

  • FCE and Export for Apple TV

    I want to be able to use FCE to edit my HD footage from my Sony HD7 camcorder then display results through Apple TV. I know I will lose resolution, but am having one particular problem. After importing clips to FCE I exported to Quicktime movie, then opened the file in Quicktime and exported to Apple TV. The resulting video seems "jerky" at least to my eyes. Almost like every other frame was cut out. Do I need to export from FCE at a different resolution or frame rate to get the export to Apple TV looking better?
    Thanks all for the help.

    Thanks Tom. Could be just my eyes seeing the difference in the results, but here are the details.
    Original File from Sony HDR-HC7
    Video Tracks:
    Apple Intermediate Codec, 1440 x 1080, 29.97 fps, 98.77 Mbps
    Audio Tracks:
    16-bit Big Endian stereo, 48 kHz, 1.54 Mbps
    Export direct as QuickTime movie and conversion to Apple TV seems to show some jagged sharp motion to my eyes, so I tried the steps below and got a more fluid result.
    The exported from FCE to 1280 x 720 with these settings:
    Compression: H.264
    Quality: High
    Key Frame Rate: 24
    Frame Rendering: Yes
    Encoding Mode” multi-pass
    Dimensions: 1280 x 720
    Results of export from Final Cut
    H.264, 1280 x 720, 29.97 fps, 17.48 Mbps
    16-bit Big Endian stereo, 48 kHz, 1.54 Mbps
    Then converting that to Apple TV file (opened in QuickTime and used export for Apple TV):
    Video Tracks:
    H.264, 960 x 540, 29.97 fps, 3.81 Mbps
    Could be that Export to QuickTime Movie makes an Apple Intermediate Codec file and the export using QT conversion made an H264 codec. Perhaps there is a difference in the way the QT function "export to Apple TV" handles those two codecs???

  • How export one table along with data from one location to other location

    Hi All,
    I'm new in export/import practice.
    Can anyone plz tell the steps along with commands to do the following:
    1. I want to export a table with data from one location(computer) to other(computer) that are in same network.
    2.Also from one user to another user.
    I'm using oracle 10g.
    regards
    Sonia
    Edited by: 983040 on Feb 19, 2013 11:35 PM

    First of all read documentation
    Oracle Export/Import : http://docs.oracle.com/cd/B19306_01/server.102/b14215/exp_imp.htm
    Datapump Export/Import : http://docs.oracle.com/cd/B19306_01/server.102/b14215/dp_overview.htm
    If you are using Datapump or Traditional Export/import you need to follow following steps
    *1) Take User dump via EXPDP on Computer A .*
    For EXP
    exp username/password owner=Test file=D:\test.dmp log=D:\test.log
    For EXPDP
    expdp username/password schemas=TEST directory=TEST_DIR dumpfile=TEST.dmp logfile=TEST.log*2) Copy that to Computer B*
    *3) Import dumpfile.*
    For IMPDP  Use remap_schema optionhttp://www.acehints.com/2012/05/data-pump-impdp-remapschema-parameter.html
    For IMP use fromuser and touser option
    one user to another user imp

  • IMovie 6 Chapter Export for Apple TV

    Ok, this is driving me crazy. All I want to do is export my iMovie 6 edit in a reasonably high quality export (for archive and Apple TV) WITH my chapter points preserved. I've already made a DVD so I just want the video file, but with basic interactivity, i.e. 11 chapter points over a hour of edited footage. Is there a workaround for this, for example exporting to FCP and then Compressor. TIA, chris

    All I want to do is export my iMovie 6 edit in a reasonably high quality export (for archive and Apple TV) WITH my chapter points preserved... Is there a workaround for this, for example exporting to FCP and then Compressor.
    If the Compressor application is a resonably current version, simply drop the chaptered iMovie HD v6 timeline (i.e., the "Shared > iDVD" file) to Compressor, select the appropriate device preset, and Compressor will do the rest.

  • Export for Apple TV

    I've edited footage in FCE4 in separate projects from both AVCHD (Sony HDR-CX7) and HDV (Sony HVR-Z1U). In both cases footage is in a 16x9 format. When I export and set it for Apple Tv I get a squeezed picture that plays fine on Apple TV in both cases. I've tried exporting at various settings that result in a 16x9 movie but they won't sync with Apple TV. Help would be appreciated. (I've had great results with iMovie and recently moved up to FCE4)

    Try exporting as a quicktime movie then convert to Apple TV with Quicktime.
    BTW you should setup your forum profile to show your hardware and software versions.

  • Help on export sybase iq tables with data and import in another database ?

    Help on export Sybase iq 16 tables with data and import into another database ?

    Hi Nilesh,
    If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
    Extract/ Load table
    Insert location method : require IQ servers to be entered in interfaces file
    Backup/Restore : copy entire database content
    If you have not the DDLs, you can generate them using IQ cockpit or SCC.
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
    http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
    Regards,
    Tayeb.

  • Configuration Profile for Apple Devices with ISE

    Hi,
    is there any possibility to put configuration profiles on apple device with the ise? I need to disable the dataroaming function in forgein countries for ipads.
    Best regards
    Felix

    Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
    So when I try to get them as substring i get multiple copies of same mac address.
    But looks like this will work as solution to this problem.
    So far I was doing it this way (And i am sure there is clearer way to do it.)
    SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
                FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM  v_GS_NETWORK_ADAPTER) t2
                WHERE t2.ResourceID = ResourceID
                ORDER BY t2.ResourceID, t2.MACAddress0
                FOR XML PATH ('')
            ), 2, 100) [MACAddresses]

  • HT2589 App updates asking for apple id with wrong apple id

    My husband is trying to update an app on his ipad and it is not only asking for apple I'd password, but it brings up my apple Id. We checked in setting and t shows his apple id. How can he update without signing in especially with my id.

    You should be prompted for the password for the account that originally bought/downloaded the app. Have you tried typing in your account's password when trying to download the update - you shouldn't need to go into Settings and log out of his account and in with yours.
    If it was definitely bought/downloaded with his account, then depending upon what the app is and whether it has any content in, then you could try deleting it and re-downloading it from his account.

  • Implement check for File Names with data into TRG table

    hi,
    I am trying to load the Multiple files names & Autonumber to oracle table T1 which is further loaded the auto-number with data to target table TRG. My problem is when the same name file comes again due to size then load it again. & also don't insert Target (TRG) table rows with same data while insert the only those records/rows which are not in Target Table(TRG) .. Is this standard approach. becoz in this way I thing loading Performance speed will b down??
    Any other or best recommended approach???/
    Thanks
    Regards,
    AMSIII
    Edited by: AMSI on Dec 11, 2012 9:54 PM

    Hey Jason,
    Create a validation of type exists. in expression 1 put:
    SELECT 1
    FROM DUAL
    WHERE UPPER(:P9_FILE) LIKE '%TEST.HTML';
    {code}
    change P9_FILE to your file browse item name and change '%TEST.HTML' to '%YOUR_FILE_NAME'
    Hope this helps,
    Tyson                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • HT3180 I followed instructions above for  Apple TV with aluminum remote.   Still no response.  Screen is black.  Apple icon appeared briefly then went back to black screen.

    I cannot access Apple TV.  I restarted using the instructions to press menu and down together.   The apple icon appeared briefly and then the screen went black.   What can I do to restore Apple tV?

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • Commands for apple earbuds with mic

    Hi, I have a pair of apple earbuds with a mic that came with my iphone and since you can press the mic i don't know all the commands. Can someone tell me all the commands?
    Thanks in advance,
    aznD

    Refer page 24
    http://manuals.info.apple.com/en/iphoneuserguide.pdf

  • Problem creating cache group for a table with data type varchar2(1800 CHAR)

    Hi,
    I am using TimesTen 7.0 with Oracle 10.2.0.4 server. While creating Cache Group for one of my table I'm getting the following error.
    5121: Non-standard type mapping for column TICKET.DESCRIPTION, cache operations are restricted
    5168: Restricted cache groups are deprecated
    5126: A system managed cache group cannot contain non-standard column type mapping
    The command failed.
    One of my filed type in oracle table is Varchar2(1800 CHAR). If I change the filed size to <=1000 it (E.g. Varchar2(1000 CHAR)) then the Create Cache command works fine.
    MyDatabase Character Set is UTF8.
    Is it possible to solve without changing the filed size in the Oracle Table?
    Request your help on this.
    Thanks,
    Sunil

    Hi Chris.
    The TimesTen server and the Oracle Client is installed on a 32-bit system.
    1. ttVersion
    TimesTen Release 7.0.5.0.0 (32 bit Linux/x86) (timesten122:17000) 2008-04-04T00:09:04Z
    Instance admin: root
    Instance home directory: /appl/TimesTen/timesten122
    Daemon home directory: /var/TimesTen/timesten122
    Access control enabled.
    2. Oracle DB details
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    CORE 10.2.0.3.0 Production
    TNS for Linux: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    Oracle Client - Oracle Client 10.2.0.4 running in a 32 bit Linux/x86
    3. ODBC Details
    Driver=/appl/TimesTen/timesten122/lib/libtten.so
    DataStore=/var/TimesTen/data
    PermSize=1700
    TempSize=244
    PassThrough=2
    UID=testuser
    OracleId=oraclenetservice
    OraclePwd=testpwd
    DatabaseCharacterSet=UTF8
    Thanks,
    Sunil

  • Reports for Apple devices with SCCM client - Mac Addresses and IP information.

    Greetings.
    I've been having an interesting problem.
    I am currently running SCCM 2012R2 with PKI and have clients installed on windows, linux (ubuntu mostly) and apple computers successfully.
    I have created custom report proving me with hardware information for windows and linux machines (Serial numbers, manufacturer, Mac Addresses and IP addresses) successfully.
    So far I wasn't able to create any report or even find what table information about Apple computers MAC and IP addresses is stored.
    If i go to Apple computer in SCCM using resource explorer under hardware I can see network devices, so that information is definitely gathered by SCCM in some way.
    Can anyone help me out with this and maybe I am doing this in a wrong way?

    Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
    So when I try to get them as substring i get multiple copies of same mac address.
    But looks like this will work as solution to this problem.
    So far I was doing it this way (And i am sure there is clearer way to do it.)
    SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
                FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM  v_GS_NETWORK_ADAPTER) t2
                WHERE t2.ResourceID = ResourceID
                ORDER BY t2.ResourceID, t2.MACAddress0
                FOR XML PATH ('')
            ), 2, 100) [MACAddresses]

  • Calender Sync for Iphone 3G with data from 2 seperate pc's

    Current situation:
    1 IPhone 3G where personal calender and personal contacts are synced via Itunes to my personal PC at home.
    Phone is working on my personal SIM card and is only for personal use...
    'Dream'-situation:
    As I now have 2 phones (1 personal Iphone and 1 Work mobile (nokia) this is what I want to do (but struggeling to get it to work...)
         1. I would switch the SIM cards and use the 'work' SIM card in my iphone (as my work would pay for the phone calls) and I can close the SIM account that i'm paying for - you know, crisis
         2. I would then like to add my 'work' calender from my 'work' pc via Itunes
         3. Then I would also like to add my 'work' contacts
    Now for my questions:
    I know for the calender you can have 2 'calenders'  - but can you also have 2 Contact-groups (similar to the calender accounts?
    Can I then sync the same Iphone with Itunes on my work pc (and only syncing the 'work' calender and/or contacts)?
    Can I then still sync the same iphone with Itunes on, my Home pc (and only sync the 'personal' calender and/or contacts?
    So in both situation, I would connect the Iphone via cable to the PC's (work or personal); but only want to synchronize specific calenders and/or contacts.
    Can I do this with the same apple ID
    And who can help me to set this up - as first trials, just erase everything 'personal' when syncing on the work pc...
    Thanks

    iTunes is not seeing device when connected. It simply freezes (Not Responding) for minutes then fails to see device.
    I have previously uninstalled and re-installed latest from Apple 10.2.2. The only way I got that to work was uninstall AMDS and install version 10.0.1 this worked beautifully for ONE Night only. I am now with 10.2.2 that takes 2-4 minutes to start (non responding half of that time the first half just not shown by task manager) and cannot see device. I tried starting iTunes with devices plugged in and same issues. Windows (Vista 32) does see iPhone.

  • Share/export for Apple TV

    Is my only option to pick the Share to iTunes with Large (960x540)? I have HD (1080) projects I'd like to have available thru ATV.
    Quicktime, using 'Movie to Apple TV' has only Default settings - non-changeable.
    My TV is 720p via HDMI. Shouldn't I be able to get some larger output?
    Thanks,
    Rick

    Is my only option to pick the Share to iTunes with Large (960x540)? I have HD (1080) projects I'd like to have available thru ATV.
    No but there are specific file playback limitations. Playback of files having frame rates of 29.97/30 fps is limited to 960x540 resolution while files having 23.976/24/25 fps are limited to 1280x720.
    Quicktime, using 'Movie to Apple TV' has only Default settings - non-changeable.
    You can, in fact, create files at any dimension you wish using the "Export Using QuickTime" H.264 or MPEG-4 export options but whether or not they will play in the TV media player is something else.
    My TV is 720p via HDMI. Shouldn't I be able to get some larger output?
    TV itself will output 1080i and 1080p scaling of your playing files if your TV will accept it.

Maybe you are looking for