Export for old QT Players

Is it possible to export a movie so that older version will be able to view it? I have the newest QT Pro and when we went to test the movie on our work computers, we had to update all of their players in order to view it.
Thanks y'all!

Just thought I'd expand on the few CODECs already posted:
H.264 Video codec requires QuickTime 7 to view.
Use MPEG-4 Video codec for version 6 and higher.
And...
Sorenson 3 for QuickTime 4
Sorenson for QuickTime 3
Cinepak for QuickTime 2.5
The above is a quick snapshot of "low bandwidth" CODEC history for QuickTime delivery. With almost every new release of QuickTime, a new CODEC has been introduced that offers better image quality at lower data rates. The trade off? The file has to be played on a system with the corrsponding version of QuickTime or newer.
Cinepak by Radius was arguably the best choice in the early days of CD-ROM production for QuickTime content; however, the image quality was always low for moving picture - excellent for static images (like slide shows), but the image degraded immediately with motion.
Sorenson marked the start of CODECs that offered low data rates with excellent image quality, improving greatly with Sorenson 3.
Sorenson 3 is a pretty safe CODEC to use for both Mac and Windows users. Millions of users downloaded the "Star Wars: Episode 1" QuickTime trailer which used Sorenson 3.
If low bandwidth isn't a requirement and you're just looking for a file that will open with any version of QuickTime (Mac or Windows), use Animation. File size will be about half of what an uncompressed (or "None" compressed) file would be based on the corresponding image size, color depth and frame rate.
Another post in this thread touched on whether or not the CODEC choice affects being able to add hinted streaming to a QuickTime movie. These are separate settings (the CODEC being under "Video" options and the hinted streaming being under "Fast Start" options), so there's no direct relationship. However, it's important to match "Fast Start" options with CODECs that allow for effective use of this feature.
-Warren
Message was edited by: Warren Heaton

Similar Messages

Please let the old Kiss players be free!

Hello!
I am asking for a favor from Cisco! Please either:
a) release complete sources for old KiSS players (DP-600, DP-1600 etc.) so one could create own firmwares
or
b) release new firmware updates with telnet/ssh/ftp enabled
These old devices are great for learning embedded Linux and personally I wouldn't want to trash perfectly good working electronics. For example I have a DP-600 so my son can watch his own programs in his own room without having to worry if the device breaks as the replacement players are very cheap and there seems to be a lot of them available.
Thanks!
Teemu

Two things that might help the sluggishness. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps.

Export for production company

With old Ultiboard versions it's possible to make a EDF or GenCAD export. We use this export for programming (Tecnomatix/Unicam) our SMT Pick&Place equipments. In the latest Ultiboard versions it's only possible to export a centroid file. This means a lot manual programming. Is there any possibility for an better export than centroid??

Everybody is talking about cost reduction. Therefore it’s necessary to reduce as much as possible the manual programming. With programs like Unicam or Aegis is better to use an edf, gencad or ODB++ export. In these kinds of export information about traces is also included. For SMT we use these information for our SMT stencil design. The use of these kinds of export instead of centroid means less manual programming (costs).
Now days the interfacing between software must better than in the past.
Why has Ultiboard skipped this option?? Why not an ODB++ export possibility?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. Any suggestions?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility. Any suggestions?

Is the computer in you equipment line:
Dual Core Intel Xenon
(which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
If a Mac Pro, their forums are here:
Mac Pro
and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
If you really have a pre-2005 PowerMac, read on.
If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
Get a powered USB hub (has its own power brick
Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
The second gets power from two USB ports on the computer and often that's enough.
Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

Problem with Exporter for MS Access 3.2 in SQL Developer

Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?

Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas.

Edit Color Sync for Exports for Web Sites

Hi,
Perhaps this has been covered, but I've not found the thread. Most of the export color sync questions seem to revolve around printing or displaying on one's own monitor. Neither is an issue for me. However, I note that my RAW images exported from Aperture 2.0 as jpg's and then uploaded to web sites such as Jalbum and Orkut are washed out. Some forums have suggested this is due to those websites being optimized for sRGB. I understand that Aperture uses a proprietary color sync profile; however, my default EXIF - Expanded shows "Color Model" as simply "RGB", and "Profile Name" is Adobe RGB (1998) (my Canon 50D is set to sRGB). Again, I have seen suggestions on this forum that one can change these settings, but the process appears to be only for printers and monitors. Where/how can I change the export for uploading jpg's to the web.
Thanks,
Nick

I understand that Aperture uses a proprietary color sync profile
If the profile were proprietary, it would be an illegal profile under the ICC Specification.
However, I note that my RAW images exported from Aperture 2.0 as jpg's and then uploaded to web sites such as Jalbum and Orkut are washed out.
If you did not disable embedding of an ICC source colour space in Aperture, if you did not use a non-ICC enabled browser, the OS X system level services will set up a ColorWorld and convert the pixels in your JPEGs matching from the ICC source colour space to the ICC destination colour space of your display. Thus you will get what you uploaded in the first place.
I have seen suggestions on this forum that one can change these settings, but the process appears to be only for printers and monitors.
The idea is that each and every colour device is calibrated and that calibration is captured in a colourimetric colour characterisation from which an ICC colour device profile is computed. Colourants that form certain colours one one colour device at one calibration will form other colours in the same colour device at another calibration and in other colour devices at yet other calibrations. By means of device profiles, the COLOURS can be kept constant while the COLOURANTS are recomputed to compel the device to paint the closest possible match it is capable of.
Some forums have suggested this is due to those websites being optimized for sRGB.
The issue is whether people who post pictures do or do not embed ICC source colour spaces into their pictures and whether they pick browsers that are ICC-enabled or pick colour blind browsers.
To determine if there is an embedded ICC source colour space in a picture, download the picture to disk, open iApple Preview and select Tools > Get Info > Summary.
Colour Model: This defines the format or model of the colourants, e.g. three component RGB, four component CMYK.
ColorSync Profile: This defines the ICC source colour space. If there is none in the image file, the system level service assigns the Generic RGB Profile for model RGB, the Generic CMYK Profile for model CMYK and so forth. Therefore, any ICC source colour space than a Generic Profile source colour space is embedded in the image file itself.
In technical terms, the rule is that to construct a ColourWorld that does a colour space conversion through the PCS Profile Connection Space, you have to have an ICC source colour space and an ICC destination colour space (typically your display profile). It follows that the system level service ASSIGNS an ICC source colour space automatically where is none embedded. The ICC source colour space that is assigned when there is none embedded is the Generic RGB Profile for colourant model RGB, as explained.
/hh

Mail export for OS 10.8.5

Mail export for OS 10.8.5 (OS Mountain Lion):
How to export your mailbox?
Press Option button (keyboard) AND select "Go" folder using your mouse at the top of the window in Finder.
Look for "Library" on the menu bar. After you select the Library, you will see Mail folder.
Open that Mail folder.
There is only one folder that shows you "V2." I do not know why it is created. Go look inside that folder.
Now, you see your created mail folder such as Mailboxes, MailData, POP- ... folders, and RSS. Please becareful.
Please go back two times (arrow left) where you found Mail folder.
Finally, you drag that specific folder manually - Mail folder into your external hard disk drive. That's what you wanted for your backup.
Hope that help!

Mail export for OS 10.8.5 (OS Mountain Lion):
How to export your mailbox?
Press Option button (keyboard) AND select "Go" folder using your mouse at the top of the window in Finder.
Look for "Library" on the menu bar. After you select the Library, you will see Mail folder.
Open that Mail folder.
There is only one folder that shows you "V2." I do not know why it is created. Go look inside that folder.
Now, you see your created mail folder such as Mailboxes, MailData, POP- ... folders, and RSS. Please becareful.
Please go back two times (arrow left) where you found Mail folder.
Finally, you drag that specific folder manually - Mail folder into your external hard disk drive. That's what you wanted for your backup.
Hope that help!

I want to update iCloud account with new apple id but don't know password for old apple id. Plus can no longer receive email at old apple id. How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

I want to update iCloud account with new apple id but don't know password for old apple id. Plus can no longer receive email at old apple id. How can I delete the current iCloud account on my iPhone if the previously stated conditions exist?

If the old ID is yours, and if it is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers

Sold my wifi iPad and reset b4 selling but new owner can't log into apple keeps asking for old( mine) Apple id

Sold my wifi iPad and reset b4 selling
New owner can't sign into his Apple ID keeps asking for old (mine) Apple ID
Thought would have erased with resetting iPad

Hello, your iPad is 'Activation Locked' as a part of 'Find My iPad'.
Log onto www.icloud.com, go to 'Find My iPhone'. Then select 'All Devices', your old iPad will probably show here, select 'Remove from Account'.
If there is no option to 'Remove from Account' ask the current owner to switch iPad off for a while, and remove from account should show in 5 minutes or so.

I have a Vin, iMac 20 inch early 2008 . Can anyone tell me the now equivalent of this model? We had a housefire and I need to replace it new for old. I have a serial no. but cant find out which one would be the same model to replace it now.

I am trying to find out how to find the specs because the machine is my daughters and it is no longer useable but if I know where I can find its details from the serial no I can get it replaced new for old on the house insurance. Where can I find these details?

I lost equipment due to lightening strike several years ago, which also had old equipment and was not available. I gave insurance images and provided original receipts (my purchases were made on Apple.com), and Apple provided electronic copies of the receipts. You may want to contact Apple and check, if they can provide a copy. Insurance may depreciate the original value. I was offered residual value which i used to buy newer replacements, and provided the receipts for replacements back to insurance.

Export for web doesn't work (X and 7).

I use the export for web feature a lot. I find that I have to bounce back and forth between Quicktime 7 and X because sometime this feature will work and sometimes it doesn't. There's no consistent reason I can figure out why the applications will or will not work properly. On some occasions I get some small 8Kb file. On other occasions, I only get the audio.
Any ideas?

Uhh, the system requirements for Photoshop CC state you need 2 GB RAM, 8 GB recommended. This is likely your problem.
Benjamin

Strokes on appearance is getting cut off when exporting for web & Devices

I'm a screen print artist using Adobe Illustrator CS5 in windows 7(blah!) to export images of our customers' artwork into a huge folder of images on a server. The images are then loaded into a program so that they can be viewed company-wide and by the customer.
Occasionally, when there is an appearance applied to text it seems to cut off the tops and/or bottoms of the outermost stroke.This seems to be only happening to text, and happens randomly and is very annoying. See the image attached.
it does this with both JPEG and PNG images, and whats more, changes when you adjust the image size. it either gets better or worse. I have to change the image size on every export so that they are all within our size requirements.
I have found that if you put the art into an envelope with all the settings at 0 and then export for web it prevents this from happening. However, that isn't very efficient as i need to be moving a ton of artwork a day, and I am not the only person who may be working on the Illustrator file.
Is there any setting either in illustrator or windows that may be causing this anomaly?

Try adding:
Effect >> Path >> Outline Object
So your type will still be editable
If that does not work you may want to:
Type: Create Outline
I only had this problem once before, on some snickerdoodle cookies package, and that was a script font. Might be related to the font you use.

FCP 7 exporting for DVD, Image problems

Hey,
New here so sorry if I'm a little slow with everything. We shot some concert footage using 4 cameras, 3 cameras shot in 1440X1080 HDV 1080i60 and the other camera shot in AVCHD but was imported as 1440X1080 ProRes 422. I edited the video in a sequence with settings of 1440X1080, field dominance of Upper (odd), and compressor HDV 1080i60. I was trying to find a way to export for SD DVD in the best quality I could and found Ken Stone's site,
http://www.kenstone.net/fcp_homepage/hdv_timeline_to_sd_dvd.html
It's worked for me on other projects. This project is a 2 1/2 hour DVD, so I tested that method on a minute of the footage and it didn't come out well just for one camera. I followed Ken Stone's page and took the sequence and changed the settings to field dominance None, and compressor to ProRes 422. Then I exported using quicktime conversion with settings of ProRes 422 HQ. Once that file is exported I've been taking it to Compressor and using either DVD Best 90 Minutes or 120 Minutes. On the max bitrate I don't go above 7.9 and on the average I'm usually around 6.7 for Best 90 minutes and 5.2 for Best 120 minutes. Whenever I put the footage in DVD Studio Pro, the footage from the 3 cameras shot in 1080i60 look great but the footage originally shot in AVCHD has all sorts of lines and distortion on movement. I'm just trying to find out if there is a better way for me to take my footage from final cut to SD DVD and still get good looking footage out of the original AVCHD footage. I don't really understand why the footage from the AVCDD footage is coming out like that since it was imported as ProRes 422. Any ideas on how to fix this?
Thanks,
Matt

Thanks a lot, this did the trick.
Yeah I'm doing a dual layer dvd, but I'm sending it off for replication so from what I've read it sounds like I have to build and format the dvd, then burn each Layer to it's own dvd. Do you have any experience with this? The break point is kind of confusing me right now because it sounds like just a lot of trial and error.
Thanks again
Matt

Using Quicktime's "Export for Web" feature in iWeb?

Greetings,
Does anyone know if this is possible within iWeb, that is, to use movies created using Quicktime's "Export to Web" feature, which really seems to deliver superior movie quality?
Much appreciated,
DaveB

Thanks, good stuff, though I'm still having a small problem with this. I'm getting a gray line around the top and left of my movie and the right side of the player is getting cut off. When I try to make the width larger, it just moves the gray line further to the left.
Any ideas?
http://www.brianderr.com/brianderr/copythis3.html
*This is the script that I added to the html snippet in iWeb.* I changed the height to 505px because it was cutting off the bottom of the player at 496.
<iframe src="http://idisk.me.com/brianderr/Public/KANYE%20PT%201/kanye1.html"
style="width:720px; height:505px";
scrolling="no">
</iframe>
*This is the script from my read me file that I kept:*
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
<head>
<title>QuickTime Pro - Export for Web - KANYE PT 1</title>
<script src="http://www.apple.com/library/quicktime/scripts/ac_quicktime.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/scripts/qtp_library.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/stylesheets/qtp_library.css" rel="StyleSheet" type="text/css" />
</head>
<body><script type="text/javascript">
</script>
<noscript></body>
</html>

Export for old QT Players

Similar Messages

Maybe you are looking for