Export from FCE to iDVD, results in black border around movie

Here is the problem....
I have edited a movie in FCE where all of the footage is 1440 x 1080
I export it using: File -> Export... QuickTime movie
I choose "self contained" movie and "audio/video", plus "chapter markers" in the pop up menu.
I then take this into iDVD amd all looks ok in the preview, but once burnt to DVD, there is a large black border around the entire movie. It is almost like it is a smaller movie which does not fill the screen correctly.
Any idea why this happens and how to overcome this. When I lok at the exported movie from FCE- it is 720-x576 and not the full size- is this the problem?
Thanks for any tips.

Hi
Is it widescreen ?
Did You in Your browser window set sequence and material to anamorphous. To me it was a revelation that the Browser window was exstendably to the right with lot's of columns - and one of them was Anamorphous.
Did you start a WideScreen project in iDVD - First window that opens after You clicked Start a New iDVD project (top button). At bottom this new window You set 4:3 (SD format) or 16:9 for WideScreen.
In iDVD You also need to go up to Project and down to Projectinfo
then set 16:9 here TOOO !
Proportion - Change it to 16:9
When I go from FinalCut to iDVD - I do
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used ( Important as cheap brands DO NOT WORK )
• I use Verbatim
• I use DVD-R
Burn speed set (IMPORTANT)
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this e.g. .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Problems - then Trash iDVD pref. file and run Repair Permissions - and have a re-try.
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

Similar Messages

Exporting From FCE to IDVD With Chapters How long

Exporting From FCE to IDVD With Chapters How long will the DVD hold??? if i have an hour and 40 minutes of HD footage all cut together with FCE and has been saved as a movie file, how many hours will IDVD let me burn to it?
if i run over the allowed amount will it say i need to drop quality, i am editing loads at the moment and dont want to get to the end and it come up with an error message. also will idvd include the chapter markers if i export with them?

Sure, no problem.
1. Go to Project > Project Info in iDVD.
2. Make sure "DVD Type" is set to a single-layer DVD.
3. Under "Encoding," choose "Best Performance." Is the arrow solidly in the green portion of the quality bar? If so, go ahead and burn your disc.
4. If not, choose "High Quality." Again, go ahead and burn your disc if the arrow is solidly in the green.
3. If the arrow still isn't in the green, select Professional Quality. If the arrow's in the green, burn your disc. If not, you'll have to delete some of the menus (scene selection, etc.) or menu content and check again. You should be able to burn up to 2 hours if you don't have a lot of other menu content.

Exporting from FCE to iDVD

No matter what I do iDVD 09 quits with a "iDVD unexpectedly quit . . " message after exporting from FCE.
The movie has 12 chapters and includes chapter markers.
I have tried to rename file, repair permissions, delete plist prefs, save as disk image, have plenty of hard disk space but all with same result.
Any suggestions?
Doug

Hi Michel,
Here is what I did (and settings)
FCE 4.0.1
Mac OS X 10.5.8
QuickTime Player 7.6.2 (518)
Format: .mov
No Itunes purchased. Just converted one or 2 mp3s to .aiff format
Export settings from FCE:
Export: as Quicktime Movie
Include: Audio and Video
Markers: Chapter Markers
Make Movie self-contained: unchecked
Thanks!
Doug
All media stored on external hard drive but when I burn DVD I bring .mov file
onto my desktop.
Using standard DVD R disks from Staples

Black Border around movie in HD

I'm a newbie so apologies if this is a really dumb/basic question.
I recently edited a movie that I shot in HD (1080i). I edited it in Final Cut Express but there is a thick black-border around the whole thing, which is the say the footage doesn't fill the screen, and this isn't letter-boxing, it's a square around everything. How do a remove this? When I export it to quicktime it distorts the picture.
Here is what I'm talking about:
http://www.youtube.com/watch?v=UZ5il5ZfZ1c

It looks as if its been captured incorrectly? Are you sure you shot HD 1080i? If yes, it looks as if the camera downconverted on export and you used a DV setting. Make sure you use the correct HDV setting to capture. Make sure the sequence you're working in is also set to the correct HD format. Make sure the camera is outputting HD and not outputting DV.

Interlacing? Exporting from FCE to iDVD

I have spent the last 2 months and many many hours working on this project for a banquet. I finally finished it late last night, and now I have spent the last 8 hours trying to make a DVD out of it.
I tried "export>quicktime movie" as well as "export>using quicktime" conversion. I import it into iDVD and burn the DVD and I get a headache trying to watch it on my TV or on my mac. anything with motion flickers and seems to have ghosts. from what I have been reading, this is interlacing?
Does anyone know how I can fix it? I have tried so many different things, (since this has come up before) and 5 wasted DVDs late, I still can't seem to fix it.
The Camcorder I used is a JVC EVERIO GZ-MG630RU. I imported all of my clips into imovie, exported as an XML file for FCE and Imported the iMovie XML into FCE.
If anyone knows how I can get rid of this problem please help me. I don't want to give 400+ people a headache for an hour!

Also,I took a few clips and edited the frames in corel painter 11 then exported them as .mov files. These clips all look fine. I guessing the way I imported the rest of the video into FCE is the problem but I don't have enough time to redo the whole movie so i'm looking for a way to fix it.

Quality problem exporting from FCE

Hi,
i have a quality problem exporting from FCE. I have finalized a 30 minute movie and want to send it to friends on DVD or CD-ROM. when i use "export as quicktime movie" the file has 6.5 GB and won't fit on a DVD-ROM. when i use "export with quicktime conversion" and choose quicktime movie with H.264 compression and highest quality the movie goes down to 4.2GB. Now it would fit on a DVD-ROM, but the quality is not good. The picture looks blurred and i see some type of interlace-effect.
which type of export format do i have to choose to avoid the interlace and blurred pictures? is there a magic format that does not cost that much quality and reduces the movie by 30-40%? or would a video DVD work better? how do i create a DVD? with iDVD?
thanks for your help!

or would a video DVD work better? how do i create a DVD? with iDVD?
That's what Id do.
Export as QuickTime Movie (reference file is OK) and drop the export to iDVD.
You will get 1 hour of FCE Timeline on a single sided disc using Best Performance (iDVD setting).
Two hours using Best Quality (iDVD setting)
Al

Aspect ratio issues in iDVD with mov files exported from FCE

Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
PROBLEM STATEMENT:
My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
(Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
I am looking for a workaround:
1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
5) Other?????
I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

In the Preview window > top frame > middle button
do you have correct for pixel aspect ratio checked or not?
!http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

Best settings for export from FCE to Web

I'm trying to get a 20-minute project (audio and video) exported from FCE to iWeb in reasonably high quality. I've consulted the manual, and have tried various compression settings and consulted some online tutorials, to no avail - more often than not, if it "publishes" to iWeb, the resulting file looks like it will take the better part of forever to buffer. Any recommendations?

Well, not sure about what you mean “in reasonably high quality”...?
What export-settings did you use...? size and codec...?
A twenty minutes project for the web in reasonably quality...?
Did you start with your project in FCE with the best and highest uncompressed resolution ?
Did you export (compress) from this resolution once to your desired web format ?
Doing file compression properly, I guess, one needs years of experience...
There are far to many variables one has to consider...
t’s rather an art-form than exact science...
Anyway...
If you like, here are one of my settings:
Compression H.264 / Frame Rate Current / Key Frame Automatic / Quality Medium /
Data Rate Automatic (higher rate - higher file size) / Encoding Best Quality /
Size 480 x 270 (16:9) / Sound AAC Stereo 44.1 kHz (Mono and lower Rate reduces size).
Regards
Nolan

Quick Question (re:exporting from iMovie into iDVD)

Hello everyone!
I just have a quick question for you all... (I want to see if this is normal - I'm on a deadline and this is kind of freaking me out)
So, we have a 20 minute or so video in iDVD. It plays fine, etc etc. The goal is to burn it to a DVD.
I used the "Export -> to iDVD" function in iMovie, which launched iDVD.
But here is the weird thing: nothing comes up in iDVD. It doesn't make a new file, doesn't give me anything... it is just open, waiting for me to create a new project to work with.
YET, if I look in the Activity Monitor, I do see that EncoderServer (using 123% CPU) and ThumbnailServer (both iDVD processes) are running.... but shouldn't iDVD have told me it is working or that it is dealing with data?
This is very un-"apple". I totally would have expected a progress bar of some sort in iDVD telling me it is working or something.... or is something wrong and I should try to export it in a different way?
(I guess the underlying question is: when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)

Hi Matt!
when you export from iMovie to iDVD, does iDVD normally give you any 'heads-up' that it is working? how long does it normally take to open the project in iDVD?)
Yes, and it's instant.
What you should see is iDVD opening and asking you to create a new project, It will suggest naming it the same as the iMovie project.
There are reports that exporting from Imovie to iDVD can produce problems. What I do is save the iMovie project and close iMovie. Open iDVD, create the new DVD project, then go the File menu in iDVD, scroll down to Import, and in the side menu select Video. This open your Movie Folder, wherein resides your iMovie project. Select it and it imports into iDVD in a flash.
Remember: iMovie projects go in the Movies Folder, iDVD projects go in the Documents folder. Change that, and they get very confused and unhappy.

Export from FCE is different then the timeline

hi there, when I try to export from FCE the output file is different from the video in my timeline.
It concerns a screengrab recorded with QT10. That QT file is converted to a Apple intermediate codec - as I normally do with QT files.
I edit it & then export it to a h.264 QT HD file. There's clearly a difference between the final QT and the video in the timeline.
Shots mysteriously appear where they can't be seen in the timeline, cuts are not exact where I've put them.
I've tried a different output codec, re-did my AIC encoding but nothing helps..
Can't find any logical reason why this happens. It's the first time I've had this happen.
Thx for feedback
WS

I've tried several things but the problem remains.
I made a new AIC file @15fps and exported again to h.264 @ 15fps but I still see shots that are not in the timeline.
I have the impression that the exported files add about 10 frames ahead of the cut that I make in the timeline...
Any helpfull insights are welcome
Thx

Exporting From FCE 4 to Quicktime in HD

Whenever I try and export my finshed HD project from FCE 4 to Quicktime, it exports fine but is no longer in HD. Its quality degrades by quite a bit.
How can I export from FCE 4 to Quicktime and keep its HD quality?
thanks, will

Hi(Bonjour)!
What is your sequence format?
Do you export a +quicktime movie self contained+ or export +with quicktime conversion+?
What settings (video codec, frame size, bit rate) do you use in the second option?
How do you monitor your exported movie (on your mac, SD TV set, HD TV set, apple TV, DVD, blur-ray, SD DVD)?
Michel Boissonneault

Audio drops when movie exported from iMovie into iDVD

Hi there,
I am a problem which I can't seem to fix.
I have created a 7 minute long slideshow in imovie with MP3 files from iTtunes embedded. The video and audio are fine when exported as a MOV file (and within iMovie itself). But when exported into iDVD for burning, the audio drops out completely after 3 and a half minutes.
I've tried updating iMovie, iDVD etc., deleting encoded assets as it says to do here: http://support.apple.com/kb/TA24043?viewlocale=en_US
to no avail.
Does anyone have any tips? My friend's wedding is on Saturday!
Thanks so much.
RR

Hi
A. I do not use "Share to iDVD" - BUT "Share to Media Browser" and as Large (not HD or other res.) - Works much better.
B. When did it hang ?
a. On Export from iMovie to iDVD
b. When DVD is played on DVD-Player
If last one - then
• What brand of DVD did You use (Yes it matters)
• What type of DVD
• Free Space on Start-Up hard disk - How much
• Burn speed - did You set down this - I do to x2 or x4
Yours Bengt W

Best codec for export from FCE?

Heya, I'm sort of a newbie, so please be patient with me
I'm trying to export a video from FCE using QT conversion. I'm going to be putting it on Youtube. What is the best codec for export? I've always heard that H.264 is the 'best', but my videos have always been pale and washed out. I tried exporting using MPEG-4 video, and it's not washed out. Is H.264 better and I should just deal with the paleness, or does it not matter too much?
Thanks

All the Web video sites re-compress your videos. So it's generally best to upload high quality files – typically determined by bit rate.
My suggestion would be to export as a Quick Time movie at current settings. (Guessing that you edited an AIC sequence,)
If you don;t have MPEG Streamclip, do a search and download it. In Streamclip, open the file you exported from FCE. Export to Quick Time. For Compression, choose H.264 from the drop down menu. Don't change Frame Size. If your movie is interlaced, check De-interlace. Check the Limit Data Rate box and type in 12,000 if the size of your movie is1080; 6,000 if your movie is 720; 3,000 if your movie is 480.
Use the YT uploader and you should be good to go.
Russ

How can I print with black border around edge of image?

I'd like to add a black border around the edge of certain images I'm printing. I know it's fairly trivial in Lightroom, but I can't see where this option is in Aperture. Is this lacking in Aperture, or am I just missing it? Many thanks.
PS -- I'm aware there are some plug-ins that claim to do this, so if Aperture can't do this, please feel free to chime in with comments on the best plug-in for this task.

Rich Hayhurst wrote:
Here's what you need:
http://www.apple.com/downloads/macosx/aperture/apertureborderfx.html
Aperture BorderFX 1.1
Thanks, Rich. That's a good plug-in, and does cover what I need (with lots of other features, too). The problem, though, is it requires an export of the image, which I then have to either print from another application, or reimport to Aperture to print. I was hoping to find something that will either just apply the border to the print job, or that would serve as more of an Edit With . . . type of plug-in than an Export plug-in, so I can keep everything in one place. Thanks again.
Message was edited by: jeffd55

How to get rid of the black border around the artboard

Hopefully my last question for tonight.
I need to get rid of the black border around the artboard. The two images show my drawing lined up with the art board and then inside the artboard. The dark gray is not the artboard.
As you see, the artboard has a black border. I need to get rid of it. It shows up in my project when my color key is green. The black won't go to transparent.
So how-to get rid of the border? Thanks
***Update***
I figured it out. View > Hide Artboards. Maybe this will help someone. Doesn't change the fact my spider looks like a tick:)

Doesn't change the fact my spider looks like a tick:)
Try to get hold of a real spider and take a look at its anatomy, specially where the legs sprout from :-)

Export from FCE to iDVD, results in black border around movie

Similar Messages

Maybe you are looking for