Export from FCP to edit in Adobe Premiere

I need to export 3 hours of HDV footage for a client who plans to edit it in Premiere. I know when I capture it and give it to him it doesn't work. What is the best way to export all the footage to give him to edit? I looked into uncompressed 8 bit but it said it'd be about 400 gigs per hour and I can't have that large of files and since it's already HDV I know it is compressed, whats the best way to do this? Thanks

If that codec is too big, then you need to look at third party solutions. SHEER by Bitjazz is cross platform.
Otherwise, like stated, output to tape and get that to the Premiere guy.
Shane

Similar Messages

Export from FCP directly into DVD studio pro?

Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
Here's a tutorial:
http://www.youtube.com/watch?v=wFgJpd7DEWw
Message was edited by: Eric Pautsch1

Exporting from FCP to DVD

Hey
Just wondering if I can get some advise. I need to export my project from final cut pro to DVD but just wondering what the best way to do this would be to get the best quality DVD. (This is for a company to take out to potential clients to sell what the company does - so it needs to look good!)
My project is no longer than 5 mins
1920 x 1080 - 1080i (16:9)
Field Dominance: None
frame rate 25
I have Final Cut Studio latest version.
I'm trying out a few options at the moment using compressor - best quality - so we'll see what these look like, but I'm not sure what all the settings should be set at.
Any advise on what you think will be best would be great.
Thanks

Wouldn't use Quicktime conversion - no need. Just export from FCP as Quicktime Movie at current settings.
In my experience, changing the field dominance from interlaced to progressive can cause stuttering particularly in motion graphics - this might not be an issue if you're laying to tape for broadcast but when you convert back to interlaced for SD DVD it can look very ugly.
In any case, at the very least, you need to be using a Kona card or IOHD to do this type of conversion properly - and really, if you want progressive you should shoot progressive.
Message was edited by: Dynamicworm
Message was edited by: Dynamicworm

What format to export from FCP for iDVD?

I am having trouble coming from FCP to iDVD. Material was shot HDV on a Sony Z5 and I downconverted to DV to edit on FCP. I make a Quick Time Movie of the edit (as DV PAL) but the pans are all juddery. How should I export from FCP to stop the juddering on pans?

http://www.sjoki.uta.fi/~shmhav/SVCDon_a_Macintosh.html#edit_convertMPEG
BTW, this is the mother of all FAQs here Sadly the FAQ section of the forum decribes just the problem, not any solutions. And searching the forums doesn't always work either.
ObSig: I don't benefit from the link.

Does FCP perform better than adobe premiere elements on a MacBook Pro?

does FCP perform better than adobe premiere elements on a MacBook Pro?
Background:
* just trying to decide what to go for re video editing app with more features than iMovie
* last time I'd tried Adobe Premiere Elements on my MacBook (but it was before I had an SSD) the performance was not good - it was sluggish to the point I really didn't want to use it
* so this question is just about whether in general FCP X performs better on a Mac (you'd think it would no, as it's made/optimized for a Mac)
My MacBook:
Processor 2.66 GHz Intel Core i7
Memory 4 GB 1067 MHz DDR3

Elements is essentially an amateur app and Premiere a professional one similar to the discontinued Final Cut Pro 7.
FCP X is a radical new approach to editing which like Marmite, you either love or hate.
It is probably between the 2 in capabitlity but much closer to Premiere.
Some might say it was better than Premiere, whilst other long standing broadcast editors would disagree.
It all depends on your standpoint and I am trying to give an unbiased appraisal.
Some of the techniques it uses are way ahead of all other apps and this is what worries people who have an established way of working, though as I mentioned in another post, there are a few omissions which have upset those editors.
Some might say (echoes of Jeremy Clarkson) that FCP X is the most advanced editing app on the planet albeit with a few teething troubles.

Best settings to Export from FCP to iWeb?

In the past I have exported from FCP to a QT that I import into iMovie and then export from iMovie to iWeb...
is there a simpler way to get video to iWeb?
I prefer not to edit in iMovie, so what FCP settings are best for iWeb? I'll ask this on the FCP board as well.
Thanks

In the past I have exported from FCP to a QT that I import into iMovie and then export from iMovie to iWeb...
is there a simpler way to get video to iWeb?
I prefer not to edit in iMovie, so what FCP settings are best for iWeb? I'll ask this on the FCP board as well.
Thanks

Quicktime export from FCP quality bad on Windows Quicktime

Hey all,
I believe this question has been brought up in a previous post (http://discussions.apple.com/thread.jspa?messageID=2932763&#2932763 "Quicktime export from FCP quality bad on PCs"), but it was never answered. So I captured video using final cut pro using the following capture preset:
Sequence Preset - DV NTSC 48 kHz
DVR-TRV900 using NTSC
29.97 fps
DV - NTSC at Best Quality
24 bits per pixel
720 by 480
When I view the video under quicktime for mac, it looks good. However, when I view the content under quicktime for windows, the quality is noticeably degraded. For instance, when I looked at the video clip in mac, there was a text overlay that displayed the time and date. When I look at it in Windows quicktime, the quality has degraded to an extent that the numbers are no longer readable. Besides the overall quality difference in playback between mac and pc quicktime, there are no other noticeable artifacts. Also, I tried viewing the video in VLC (video lan client) on windows, and it looks perfectly fine.
Ray

seems like this is a PC Quicktime issue rather than an FCP issue, you may have more success in resolving the problem if you post your question on the Quicktime for Windows forum
that said, you might want to check the Quicktime Player preferences on your PC (Edit > Preferences > Player Preferences)
make sure you have checked the "Use high quality video setting when available" checkbox
good luck
Andy

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Everytime I export from FCP using comressor I am lose my audio, any ideas as to why this is happening. Or do I have somthing turned off and I am just missing it? Dual 2.7 Ghz PowerPC G5 1.5 GB DDR SDRAM, Mac OS X (10.4.6)

Exporting via Compressor may be recommended but it is slow and doesn't fully support all available filters, etc.
Try exporting the timeline as a QT Movie (the "normal" export) using Current Settings and them submit the resultant clip to Compression. Works for me...

Export from Aperture to edit in Windows Live Photo Gallery

Hi.
I'm hoping to work collaboratively with a colleague, in a scenario where I take & edit photos, then pass them over for a possible final touch up before being forwarded to clients.
I use Mac OSX 10.6 and Aperture. He uses Windows Vista and Windows Live Photo Gallery.
The problem we've come up against is this: he is unable to edit the image I've exported from Aperture. I'm exporting as .JPG, and he's able to read them ok - i.e. load it into Windows Live Photo Gallery, but not alter the image.
Does anyone have a similar workflow, exporting from Aperture, then editing in Windows Live Photo Gallery?
Thanks in advance,
PB

Hi Frank.
Thanks for the response.
Agreed, the pertinent question is why can't my colleague edit the JPG exported by Aperture. It's probably also worth pointing out, the same problem occurs with JPGs exported from iPhoto.
The Windows software usually plays nicely with JPGs by all acounts, just not the ones I send - which I do via eMail or my public space on Mobile Me incidently.
So, another key question is: all settings being equal (color profile, quality, etc.) are the JPGs as produced by iPhoto and Aperture indistinguishable from those produced by other apps on other platforms - i.e. does the use of JPG enforce a common standard?
If that is the case, I suspect ours might be a permissions issue.
According to the Microsoft support page on editing in Windows Live Photo Gallery, the inability to edit a picture is commonly caused by unsupported file type, or read-only attribute set on the file.
Unfortunately, he and I are not in the same place, and he's not particularly au-fait with this type of problem solving. Hence, before involving him, I'd like to know:
1. it's possible (i.e. someone else does it), and,
2. what's involved (at my end and/or his).
Thanks again,
PB

PAL files exported from FCP don't display

This is a strange one... SD PAL uncompressed files exported from FCP 6.03 won't display, you just see black. HD files are fine, as are SD PAL files exported a while ago - prior to a recent pro apps or QT update possibly? As a workaround, if they exported via compressor instead of by 'export quicktime' in FCP, they work fine. Shake is 4.0 since 4.1 doesn't want to display via a decklink.
Any ideas? This seems to be a new one.

Does the computer your using to view this video have Final Cut Pro installed?

Can't open quicktime movie that I exported from FCP 5. Help!

Can't open quicktime movie that I exported from FCP 5. Help!

What arrow?
Have you tried opening the file in FCP?
If there is no error message and it will not play in QT7, it is quite possible the file is corrupted. You will need to go back to the original project and re-export the file.
x

Best way to export from FCP for website

I've been reading around about this and am not getting a clear idea of what to do...
I have some short sequences in FCP (longest is 2 minutes) that I want to post individually on my new website (that I'm just learning about).
I want to export them in a way that is a small file but that looks and sounds good, and also that can be played by most or all computers.
So I guess that is two questions: settings for export from FCP, and how to control how it will be viewed.
Thanks so much, anyone with ideas or experience!

We don't know what format you are dealing with, ratio etc.
However, some short answers for you.
For best quality at a considerable small file size the choice is, yet again, H.264 (Require QT7 or higher. For universal compatibility you may need flash conversion).
FCP main menu>File>Export>QT Conversion>Options> the higher the bit rate the better the quality but the bigger becomes the file size. Size : i.e 320x240 if 4:3; 480x270 if 16x9). Choose AAC (Not PCM) as sound format (192 target bit rate).

Exporting from FCP and using Compressor at the same time?

Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

Only in FCP 7.

What should I use to export from FCP to DVDSP?

I'm sorry if this question is too basic, but I've searched past discussions and read the manual, and can't seem to find the answer. I am trying to put a nearly hour-long movie I made onto a DVD, in order to have hundreds of duplicates made. I'm using DVD SP, and I had been exporting my movie from FCP to a Quicktime movie file, then importing the Quicktime file into DVD SP. Then recently I came across something online that said you should actually be exporting from FCP to Compressor, then to DVD SP. I've never used Compressor before, so I have no idea what to do, or if I even should be doing it. The video was fine when I exported to Quicktime, but I of course want to have the best video quality possible.. so if there's a way to keep the video at the highest quality possible (higher than when using Quicktime), please let me know (and if it could be explained as simple as possible, I would appreciate that).

Hi Ryan,
I'm relatively new to this too but you're on the right track. I would export to Compressor.
There are various settings i.e. mpeg2 fast encode, high quality 60min, 120min, widescreen, 4:3 etc and all dependant upon what you want your end result to be.
You'll need to choose your format - I suggest mpeg2 - 60min High Quality Encode > your destination for both the video and audio > 'submit'.
You should end up with a file that resembles *My Movie.m2v*
Then import that file into DVDSP into the assets pane and you're away.
Good luck!
-Chuck

Problem exporting from FCP using compressor

Out of the blue - I'm getting batch failures trying to export from FCP for use in a DVD. Immediately after selecting compressor for export, I get an error reading "That file already exists", and a new tab appears in the media browser with a lengthy character string. Compressor opens fine, and I select Best Quality 4:3 encoding for video and aiff48 for audio. When the batch is submitted - it promptly fails and blames FCP for generating an error.
Did all kinds of restarts and work arounds to no avail. The promising news is that this error seems to occur only when exporting from FCP through Compressor.
My work-around is to export a QT movie of the piece, quit FCP, launch Compressor, and then import the QT for batching.
Hope this helps anyone else in similar situations
Martin
G5 PPC Mac OS X (10.4.8) FCP 512 post production

Hi:
How long is your movie?
The best workflow is FCP > Compressor > DVDSP.
You can encode your timeline directly to get MPEG2 video and Dolby 2 (AC3) audio files. Then import those in DVDSP and author your DVD.
Using Compressor you control the full encoding process. You can test with small parts of your movie (those where you got problems with iDVD) and find the best encoding options fopr your footage.
Of course the DVDSP learning curve is longer than iDVD but once you learned ir you probably never go back. Like iMovie and FCP.
To give you detailed info about what encoding settings to use you must post some info about your FCP project.
Hope that helps !
Alberto

Export from FCP to edit in Adobe Premiere

Similar Messages

Maybe you are looking for