Export from final cut 4.5 to soundtrack pro
I cannot seem to get my audio to export correctly to soundtrack pro 1.0.1 from final cut 4.5.HD. It is bounced out as a stereo file.
when i export to STP it mixes the audio.
can some one share a work flow for getting audio tracks into STP from FCP 4.5 and keep the tracks seperate?
TIA - Jeremy
maybe i am doing something wrong. i went to the sequence. i cntrl-click the seq and select export aif(s). i did not choose stereo mix.. it still made only one track of audio and left the other 3 alone. maybe it was a mix of all, but i did not test since i only saw one file in the folder. i am new to this concept. i have only mixed music (not sound for video). i saw in the manual for final cut 4 that there is a section in the sequence settings that you could change the numbers of outputs for the sequence. so i set to 1-2, 3-4 since i have a delta 44 (not the best i know). i did the export the same as before. i now have blah1_2.aif and blah3_4.aif. blah1_2.aif has sound (do not know if it is stereo mix or just the audio 1 and audio 2 of the dv file, but blah3_4.aif has nothing. it is a blank file. i am totally confused.
Similar Messages
-
Still Frames Exported from Final Cut Jitter in DVD Studio Pro
I'm on a Titanium Powerbook G4. I use Final Cut 3.0 and DVD Studio Pro 1.5. Within my film I have several 15 second clips that are each a compilation of a single frame repeated many times so as to get the look of a still picture on the screen. I exported my film as a F.C.P. movie and when I watch it in Quicktime everything appears fine (as it does when I play it from within F.C.P.). However, when I author the DVD with Studio Pro (tried it w/ iDVD also and received the same unwanted result)those clips "jitter" or shake back and forth so I get a blurry image instead of a still, clear image like in F.C.P.
I burn the DVD w/ the internal combo drive on my Powerbook. I have never had an issue w/ any DVD that I have editied, authored or burned on this computer or w/ these programs.
Any ideas?
Thanks, Ryan
Powerbook G4 Mac OS X (10.2.x) F.C.P. 3.0; DVD Studio Pro 1.5Your answer is here:
http://discussions.apple.com/thread.jspa?threadID=675876&tstart=0 -
Best video format to export from final cut pro to encore
hi, i'm using final cut pro and no matter what format i export my video in, be it quicktime, mpeg2 or avi, there's still a slight degradation of picture quality when i import it into encore. mpeg2 by far suffers the least. but is there a best video format i can export from final cut to adobe so dat there's minimal loss in quality?
Sure, export it as an uncompressed AVI or QT file.
-
Can files be exported from Final Cut Pro X trial?
Can files be exported from Final Cut Pro X trial?
It doesn't seem to work on mine, when I go to command: the export button is in grey, whereas all the others (import; customize) are black and can be actionned. Is this a restriction in the trial version or is there a way to activate export?
Thanks -
Hi I have shot a show that ran for 2 hours. I have edited and now just need to know how I should export it and what format so it can fit on a dvd. I will be using iDVD 5 for the menus, and I am under the impression iDVD 5 doesnt support mpeg 2 files. So i need another way to export from Final Cut and then put it in iDVD 5 then onto a dvd.
I'm afraid I've mis-stated some information, and I apologize.
First, you would need to select 'best QUALITY' for anything over 60 minutes.
Generally iDVD5 should successfully create a 90 minute DVD. It is supposed to be able to create up to 2hours of content, but that would include all media creation items, including movie file(s), motion menus, drop zones, music...etc.
I had come across a link that discussed creating longer DVDs in iDVD, but it works with iMovie and is not totally relevant to this forum.
Again I apologize, but if it interests you, here is the link...
http://lonestar.utsa.edu/llee/idvd.html
K
EDIT - I might add that The Capt. and Mr. Hofmann would certainly be the words of wisdom I'd choose to go with if I were you. -
Audio out of synch after I export from Final Cut
I have a video on a Final Cut timeline. If I play in FC, audio is in synch. If I play the file in QuickTime player from my captures folder, the audio is in synch. If I export from final cut, or from quicktime pro, the audio of the resulting file is off by about 1 second. I was trying to make a h.264 file, but it does the same thing if I export to other formats as well.
This only seems to be happening with this particular video. I have a number of project loaded right now, and do not have this same problem with the other projects.
Weird....any help would be greatly appreciated.You didn't include any of your specifications for the sequences or exported movies but a problem that only exists on a single item is directly associated with that item and can be identified but they're usually subtle.
My first guess is that the audio on the original media is set to a slight different sampling rate. Could be off a thousandth of a decimal. The reason it works in the timeline is it's being conformed to the sequence settings in realtime. The export would reference the original.
I can't tell from the post where you're getting this loss of sync. Can you try exporting a self-contained movie and then use that to go to h.264?
bogiesan -
Export FROM Final Cut w/ alpha?
Is there a way to export from Final Cut and sustain the 'alpha'. For example, I'm exporting the video layer from an infomercial offer screen and will bring it into AE.
I don't think there's a way but I just wanted to throw it out there in case there's a new trick someone knows.
Thanks...and don't give me any AE tips...just wanted to know the alpha thing,
Tomyou can also use any of the Avid QT codec's as an intermediate (their codecs are freely available available for download from their website and they all support alpha ... even AvidDV)
or there is BitJazz's Sheer codec (commercial) ... or if you can wait then there's Red Giant's Microcosm codec (soon to be a free release)
also check this list here:
http://www.digitalrebellion.com/blog/posts/listof_video_formats_supporting_alphachannels.html -
Is there a way to export from final cut X to XDCam discs?
Hello,
I need to export from Final Cut Pro X to a XDCam disc.
Does anyone knows how this can be done?
Thamks
MiguelJust forgot to mention that I would like to do this with a camcorder (Sony PDW-530P) connected by firewire.
Many thanks
Miguel -
Hi Folks,
I've been reading and reading and just want to know what is
the right way to go about exporting video from a third party
application like Final Cut Pro. Yes, the easy way is to
Export>quicktime conversion and go from there. If this is the
best way then great, But i'm wondering if exporting as a lossless
quicktime codec such as the Video codec or the Anitmation codec
would be a better choice then go to the flash video encoder with
the lossless file. I heard that exporting straight out of FCP could
be bad as the video needs to be deinterlaced before the flv stage.
If this is the case, what are the best settings when
exporting a lossless quicktime file? There are about 6 setting s
that need to be set and I haven't a clue what would be the right
settings.
If exporting from final cut straight to flv, are you folks
dropping the frame rate to 15 fps(cutting your frames in half). Is
this working better for you?
Well thanks for all your help, I keep on testing short clips
and can't seem to find a any certain configuration that i really
like.
hanks so much for all your help.
toddTodd ..
We do quite a bit of video / flv work.
Our editing software is VEGAS so unfortunately we can't
render directly to flv .. but avi->flv via Sorenson Squeeze.
If Final Cut allows rendering directly to flv, my
recommedation would be to use that functionallity. Caveats .. if
the encoder can 1. deinterlace i.e. progressive scan. 2. reduce
your framerate from 29. to 15. 3. gives you the ability to control
# of key frames.
The logic being .. use the fewest number of encoding methods
to get from source to output to maintain best quality. -
Exporting From Final Cut for Dropbox
I have a 2GB Dropbox account that I would like to utilize as a way for my clients to view their projects. Specifically I have a 30:00 program that I need to export from Final Cut to Dropbox. Could someone suggest the best export settings to create a less than 2GB file? Every setting I try always produces a file greater than 2GB. If you could please be specific as possible; do I export using Quicktime or Quicktime conversion? What compression do I use? Etc. Thank you so much.
I don't know...i'd go with the H.264 for iPod video and iPhone preset in Compressor. Oughta squish it down pretty good and still look nice.
-
Color differences when exporting from Final Cut
I have a big problem when exporting from Final cut to any file format. The colors and contrast looks fine in Final cut and on my external monitor but when exporting to, for example, H.264 I get a file that is "washed out". Colors are bleak and the over all feel is not what I expect. The funny thing is that if I import the exported file into Final cut it looks fine. What am I doing wrong? Can anyone help me out with this?
QT brightens the image. Dunno why...perhaps so that it ensures that every monitor can see it?
Here is an example:
But I don't know why that is.
Shane -
How can I tell if the quicktime movie I export from Final Cut Express through Quicktime to IDVD is anamorphic
Find the Seuence icon in the Browser that corresponds to the Timeline.
Right click the Sequence icon in the Browser.
Select Item Properties.
All info is revealed.
Al -
How to play an HD movie exported from Final Cut Pro?
How to play an HD movie exported from Final Cut Pro? on a mac???
thanksHow to play an HD movie exported from Final Cut Pro? on a mac?
Most FCP users export them in a high-effeciency distribution/delivery compression format (e,g,, H.264/AAC) targeted for a particular application and/or device. For example, you could export using H.264/AAC at full display resolution for playback in the QT Player at an appropriate data rate if your platform and display can handle the output. TV would limid the video to 960x540 at 30/29.97 fps and normal AAC audio to 160 kbps at 48.0 KHz. Files exported for display an the Internet would be restricted by the bandwidth being targeted. Etc, etc, etc. Unless the file will only be played on your own platform, what you do not want to do is use an FCP only compression format which would limit viewers to those recipients have the same FCP codecs installed. -
16:9 movie exported from Final Cut Pro X showing up as 4:3 movie in iDVD
I have exported a movie from Final Cut Pro X in 16:9 and when I open it in iDVD (also in 16:9 mode) it shows up as a 4:3 video.
SD video?
http://www.fcpbook.com/Video9.html -
Problem exporting from final cut pro to compressor
Hi,
I'm trying to export to compressor from Final cut pro, but every time i do so, I keep getting the same error message 'Selection contains no media' but it does. It will export to Quicktime fine. I'm only trying to export to compressor so I can save it as an mp2 file.
I'm using FCP V5.0.4
Compressor V2.0.1
Mac OS X V10.4.8
Also on previous versions of FC I could output to Mp2 and it would include the chaper markers, my last sucessfull project, it did not.
Any help would be greatfully recieved.
G5 Single Processor 1.8 Mac OS X (10.4.8)Philip:
Check this old thread:
http://discussions.apple.com/thread.jspa?messageID=1106846􎎞
Alberto
Maybe you are looking for
-
How can I play my ipad through my dvd player
How an I play my ipad music through my dvd player or hi fi?
-
Hi All:) I am running journal import using submit request procedure and I am getting error: Running in Debug Mode gllsob() 19-11-2010 12:04:02<x gllsob() 19-11-2010 12:04:02 Error in: gllsob Function return status: 0 Function Err Message: no set of b
-
Multiple maintenance items load in maintenance plan
Hello Gurus, I want to load multiple maintenance item into a single plan. is it possible by LSMW ? if yes, then we need to creat the first plan and use change mode with same plan to load other maintenance items ? Pls advice Mahee
-
The dreaded Airport Card not Installed error
I'm getting this error now, along with problems with my ethernet port. It was working fine on Sunday, I closed it and put it in its bag, then when I took it out later, no wireless and ethernet wasn't working. I rebooted and then got the "Air Port car
-
Power Saving option After Upgrading from Anna to B...
can any one tell me where i can find Power Saving option on Nokia E6 after upgrade from Anna to Belle , coz without power saving enable its giving me one whole day. waiting for any help