Export from Indeisgn to flash, missing elements and animation!

Hi, I have a problem whit exporting files from Indesign cc 2014 -> Flash pro cc.
When i open a exported document in flash im missing elements and the animations.
I get some images and text but never vecorbased rectangles or anything graphical made in indesign.
Is the fla export function broken?  I looked at several tutroials and guides but i can't find anything about this problem.
Is the workflow from indesign these days -> eps->ai->flash-animation->save?
Thanks,
Emil E

Hi all,
Use Adobe - Feature Request/Bug Report Form to submit your issue for investigation.
Thanks,
Preran

Similar Messages

  • Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

    Why remove .flv export from Premiere Pro CC 2014? And what's a good workaround?

    OK, so you want to put it on your own web page. That's fine as long as you know how to create a web page.
    The next thing you have to decide is how big do you want the video to appear on the web page. Many people just post on YouTube and then embed the video into their web page. That way, the video can take advantage of all of the various sizes that YouTube provides.
    In any case, I suggest that you use H.264. But the data rate depends on the size of the file. If you are going to display it in HD, then you probably want to start at about 20Mb/s and go up or down from there. The required data rate depends on what you find acceptable, and that depends on the amount of movement in the video. For example, a talking head next to a white board explaining something requires a lot less bits to represent the image because less changes are taking place from frame to frame. If you use 10Mb/s for that, you might find 20Mb/s or more is required to make you happy if you shot a football game from the sidelines.
    I generally use settings that look like this image. If you have any questions as to why I choose these settings, feel free to ask.

  • Export from Quicktime to Flash

    Hello, I have several Quicktime trailers (1 minute and 8
    minutes long) that I want to encode in Flash so that I can place on
    my website. I can either export from Final Cut Pro using the FLV
    codec or use my Flash 8 encoder. These are my questions:
    1. Does one way produce better quality than another? I have
    also heard that Sorenson Squeeze produces better quality
    compression than either of these two methods. Is this true?
    2. I imported the QT movie (.mov) into the Flash 8 encoder
    and saved using Flash 8 medium quality. I then placed the FLV file
    on my site. However, when the link to the Flash file is clicked,
    the flash movie does not play; it asks you if you want to download
    the file. When I download the file, it will not open. What am I
    doing wrong? Shouldn't the flash file stream open?
    3. Are there any tutorials available on QT to Flash that can
    help me?
    Thank you for any advice you can offer me.

    Hello,
    I think you posted this in the wrong forum, here is the Adobe Captivate forum. 
    Lilybiri

  • Are 'Archived' projects in ver. 12 openable in ver. 13? ie. from Adobe Premiere bundled as Elements and Premiere.

    Subject: Are 'Archived' projects in ver. 12 openable in ver. 13? ie. from Adobe Premiere as bundled in  Elements and Premiere, their mid-level product.
    Can version 13 open up a version 12 archived project?
    How about vice versa? Have to be in a couple cities and have different version installations in different locations.
    Any insight? Support's closed and I'm heading out of town today, will need to use the 'other' version.
    Thank you.

    The ability to work natively with AVCHD files was not added until version 10, Michiel. So you'll still have to render while you work in version 8.

  • Exporting from PPro CS3 -- lots of trial and error - and Cineform?

    Rather than showing up on this forum out of nowhere and asking, "what is the best codec for exporting HDV edited material from PPro CS3 when the desired presentation is standard definition DVD" I thought I would do my homework first, and post my results. Then, if anyone has any suggestions on how to improve or if their mileage has varied from my results, I hope to learn from your comments.
    My camera is a canon HV20, filming in 1080/60i and capturing using HDVSplit (due to premiere's inability to keep my audio and video in synch). I am operating in Windows XP Pro w/SP2 with a dual core AMD 6000+, 2GB dual channel DDR2 800 RAM. Seems powerful enough for me.
    My finalists in terms of visual quality when burned to DVD using Encore CS3, 7MB 2 pass VBR, came down to these:
    1) H.264 max bit depth
    2) QT Animation Sorenson
    3) QT Animation Sorenson3
    The H.264 takes a little longer to encode, but the visual quality wins out.
    So, after doing this and reading posts on here about using Cineform AspectHD I thought I would download a trial and see what it does for me. The strange thing is, I don't seem to understand what advantage it offers, but surely it must be something since it costs $500!
    After trying the Cineform trial for a couple of days, I'm not sure I understand what good it is doing. The CFHD files have to be rendered upon placing on the timeline, and they have longer render times when applying standard effects such as the Premiere color correction and time-remapping effects. No apparent difference in visual quality, but much larger file sizes to store. So why is it that folks use Aspect HD???
    Hoping if you read this far you will share your preferred HDV-->SD export codecs and settings so I and others can learn from your efforts.
    Oh yeah - and eventually, I will be purchasing a blu-ray burner so I want to export these same projects from Premiere into blu-ray format. But for now, it is standard def in 16:9 format.
    Thanks for any comments or suggestions.
    MS

    My computer is similar to Mystroh and Esc in KC. I am not as picky and I want to work in standard definition, I've been making movies in Premiere since version 5.5. In Premiere Pro version 2 I have been making movies using 3 different Sony videocams, usually about 30 minutes long, and exporting to tape and DVD.
    So, I splurged for CS3 Production Premium and installed it. No problem.
    I composed my first movie called 'Swindle Part 1'and exported it to Encore, (direct to DVD - no authoring) and it bombed near the end of the transcoding phase with the following message:
    PGC "Swindle Part 1" has an error at 00;29;46;09. Internal software error: %0, line Swindle Part 1, ref = Bpgc, time = 00;29;46;09
    The referenced timecode is one second from the end of the sequence.
    I tried again with different clips in a different project and got the same error message.
    I can successfully export this movie to tape and to a movie.
    Any ideas?

  • Exporting from Lightroom 4 to Photoshop Elements (Both trial version)

    I have downloaded both the trial versions of the software and wanted to experience how they interact with each other.
    I cant seem to be able to export my file from lightroom to photoshop though
    Is this possible with the trial versions?

    Trial version should make no difference.
    One does not "Export to Photoshop" - Export is for one-way output.
    Photoshop, or Elements, or other editor is called in as a partner program via "Edit In..." and the options for this are set up in LR Preferences / External Editing tab.
    If Elements is not automatically appearing there, and you don't want to re-install anything in order to resolve that, you can instead manually set that up in the "additional editor" section below. Choose the Elements editor program file, a filetype and colourspace and bitdepth, and name this setup as an external editing preset. This preset then appears in the Edit In.. section of the context menu when you right-click on a photo in LR. A new file is made on disk according to your specifications, in the same folder, reflecting your LR adjustments to date, and Elements is started with this file open for editing. Save and close when finished (not save as). LR now shows a new image version, next to the original you started with, reflecting your external edits. These edits (any layers etc) remain available for further work thereafter via the "edit original" option.
    So you can go back and forward as required between the two programs, always remembering that these two KINDS of adjustment / editing, are physically independent.

  • Making a .mov into .flv  (or exporting from FCP as flash)

    I'm trying to get some short movies I made in fcp into captivate. Captivate requires the video to be flash. I have fcp 5, Adobe CS2 (no flash, I dont think), and compressor.
    I tried changing the extension file name; it played on my qt player, but once I imported into captivate, it wouldn't play.
    Anybody have inexpensive ways to convert h264 or any mov file from fcp into an fla?
    I have this sneaking suspicion that I have the tools on my computer, but just can't find them.
    Do I have to buy CS4 and learn flash? I'm going to do a lot of this- and while I'd prefer to find a free way right now, I only want to purchase once if possible.
    What's the best way?
    thanks!

    You can try encoding with MPEG Streamclip!
    It´s easy... and most of all... IT´S FREE!
    Google it "MPEG Streamclip" download the Mac version... voilá!
    There are other online solutions... try www.mediaconverter.org... but if you need to control a few parameters streamclip it!
    HBars
    p.s. it´s not directly from FCP... export a reference clip and do it!

  • How to export from FCP to Flash .FLV ?

    Hello All;
    Could someone explain how I export a Final Cut Studio project to .FLV ? I read many places that it can be done but I do not have any such option (That I can find) on the FCP File menu or File Export menu.
    Currently, I'm exporting to Quicktime and then using the Flash Video Encoder that came bundled with Flash but I am not getting very good quality and I'm wasting a lot of time trying it over and over again.
    Thanks.
    Tim

    wtd wrote:
    Currently, I'm exporting to Quicktime and then using the Flash Video Encoder that came bundled with >Flash...
    Then theoretically access to this FLV export option should be visible in other areas where you would perform a QuickTime Export.
    In FCP, for example, you could go to the menu: File > Export > Using QuickTime Conversion:
    Once clicked, an additional panel is going to appear. At the bottom of said panel will be a toggle that says "Format". By clicking this button you will reveal the other options available to you. With the Flash component installed you should have access to an option: "Flash Video (FLV)":
    Once you've selected this you can then click the "Options" button and this will open a final panel where you can adjust all the parameters of the exported movie. Should look like this:
    That is one way to do it.
    Another way to do all this would be to build a Compressor preset. All the above export options, if available in FCP, are going to be available to Compressor as well. You could set up a preset and save it in Compressor, or even save it out as a droplet that you can drop exported movies onto. Simply dropping onto a droplet triggers the FLV encode.
    One final "workaround" would be to export to H.264 and then change the resulting movies extension from .mov to .flv. This will cause it to open in Flash, usually. Flash Player 9 Update 3, released on December 3, 2007 allowed for the playback of H.264 with Flash. So as long as the end-user has this version of Flash, or newer, on their end—then playback should not be an issue.
    Hope that helps.

  • From which table check 'cost element' and its corresponding GL account?

    Hi,
    May i know from which could i check the cost element field and its corresponding GL account field??
    Questions:
    "the getting cost element should check the corresponding GL account, but I canu2019t find the
    corresponding table which include these two fields. So, if you know the table in which cost element can check the corresponding GL account, please tell me ."
    Is below way correct:
    From table CSKA, i could get the chart of accounts related with the cost elements.
    Then from table SKA1, i could get the GL account according to chart of accounts field.
    Then i got an relation between Cost element with GL account??
    Thanks!!

    Hi
    Could not locate the table, but could find that, if you come to transaction KA02, click on Environment - Display General Ledger account - In Chart of Account/ In Company Code option, then you can display the GL account for individual cost elements.
    regards
    Parag Bhargava

  • Exports from Keynote to Flash doesn't work

    I am trying to create an automatic slide show and export it as an .swf (or anything) to run on a web site and it doesn't work. For documentation of my tests go to: http://www.equalivote.com/abKeynoteExportTESTS.pdf

    Another thought: If you need it to be flash, could you export the slideshow to quicktime, then put the quicktime movie into a flash project? I'm not too familiar with flash but it seems like that would be worth a try.

  • Exporting from Keynote to Flash (.swf) to use in iWeb

    I'm working on an animation in Keynote to show it in my iWeb page. I know it is possible but I'm having some problems during the export. I know about the transitions, but is not that. Is the object itself. There are 6 objects: business logo and 5 characters created in Illustrator and Photoshop together. It's all nice during the Keynote presentation but when I export that for Flash, 3 of 6 objects don't show correctly.
    All objects are in .psd
    You can see before and after clicking in that link:
    http://web.me.com/e_vanbellen/SLvanBellen/Home.html
    And one more thing, the music is not playing.
    Thanks very much

    Im using Keynote 09 and I have tried to export through the share option in the menu bar. I have also tried to save as a powerpoint and they both give me errors that are unknown.
    Thanks for the help

  • Not booting from DVD drive | Flashing Question mark and face folder SOS!

    Hey there! I am hoping one of you folks can help.
    I noticed my iMac running really slow.
    I could not find my OS disks, so I bought OS X Leopard
    When I tried to boot from DVD it would flash the question/face folder for about 30 seconds then reboot normal. (I was able to install the OS. Just can't boot from the disk in order to run disk utility)
    Time got away from me and now my system is REALLY slow...
    I went and bought Disk Warrior
    Same issue, only my drive spits out that disk. (I can run and burn other disks)
    I won't discuss my failed attempts at getting help from the Apple store and by having the geniuses (not) call me. I would rather not pay an arm and a leg to have an approved repair center run the disk utility for me. I've already spent $169 on the OS and $100 on Disk Warrior... PLEASE HELP

    I think you are going in a totally wrong direction. Your profile indicates you have Leopard (10.5.X) however I don't believe that what you recently purchased. I think you purchased Snow Leopard (10.6.X), these are two totally different OS's! Unless you got extremely lucky and found someone selling 10.5.x then naturally you would have the problem you did trying to boot from it. My advice is:
    1. Look to see what version of OS X you are running (click the Apple in the upper left of this screen and then choose About this Mac) then cross check what version of the OS you recently purchased.
    2. If you are running 10.5.x then you will need to call Apple and purchase replacement discs for a nominal charge. Once received you should be able to boot from that disc and run Disk Utility from it.
    3. If you are running 10.6.x then re post (with an updated profile) so we can determine what the next step is.
    It seems like you don't know what you are doing and in an effort to save money you are probably going to spend more than taking your machine to an Apple Authorized Service Provider.
    Regards,
    Roger

  • Not booting from DVD drive | Flashing Question mark and face folder S

    Hey there! I am hoping one of you folks can help.
    I noticed my iMac running really slow.
    I could not find my OS disks, so I bought OS X Leopard
    When I tried to boot from DVD it would flash the question/face folder for about 30 seconds then reboot normal. (I was able to install the OS. Just can't boot from the disk in order to run disk utility)
    Time got away from me and now my system is REALLY slow...
    I went and bought Disk Warrior
    Same issue, only my drive spits out that disk. (I can run and burn other disks)
    I won't discuss my failed attempts at getting help from the Apple store and by having the geniuses (not) call me. I would rather not pay an arm and a leg to have an approved repair center run the disk utility for me. I've already spent $169 on the OS and $100 on Disk Warrior... PLEASE HELP

    Hey,
    No, I'm not running Snow Leopard. Running Leopard. 10.5.8
    I'm guessing the problem is either with my computer itself, or perhaps the DVD drive. Hard to tell. Maybe even something corrupt in my software?
    My problem is:
    I desperately need to run a disk utility of some sort, however am not able to make my computer use my OS disk or Disk warrior as a startup disk (either by holding down C, or by assigning it in System Utilities.)
    I was hoping someone might have a tip, or trick to get my machine to use one of these disks as the startup disk.
    Thanks!

  • Exporting from Media Encoder using Vimeo Preset and getting pixelated footage in a specific location

    I am exporting a video using Vimeo preset 1080p 23.976 H.264.  Everytime I export the entire video approx 5 minutes long I get pixelated footage at a very specific point every time.  I've tried multiple workarounds, relinking the media, exporting to different location (willing to try anything at this point).
    When I just export the specific problem area the problem is non existent. 
    Any advice/help is greatly appreciated.

    I am using the CC version, so I should be up to date from my understanding.
    Magically, that worked!  I'm just curious why I had that problem in the first place?  Any insight?
    Thanks again! You're quick response is much appreciated!

  • Iterate through XML find the missing element and prepare report

    Hi',
    I am reading a XML and if the ID is missing in that XML, then I have to make a report which can be send by mail
    by telling that these are the name for which ID is not present.
    I am able to iterate through the records and check if the ID is not present and pick the names for that,
    What I am not getting is how to put these names in a proper format.
    Like if I copy then each time the variable will be overwritten, if I use a append then a full new XML gets created.
    Please tell me how I can make a proper report.
    Thanks
    Yatan
    <Records>
    <Employee>
    <name>Yatan</name>
    <ID></ID>
    <Age>28</Age>
    </Employee>
    <Employee>
    <name>Yagya</name>
    <ID>101</ID>
    <Age>27</Age>
    </Employee><Employee>
    <name>Yugansh</name>
    <ID></ID>
    <Age>24</Age>
    </Employee>
    </Records>

    What about you do a XSLT transformation to get the email content in HTML format... That would avoid you to iterate through your XML...
    The template would be like this:
    <xsl:template match="/">
            <h2>These are the employees without ID</h2>
            <xsl:for-each select="/Records/Employee[ID = '']">
                <xsl:value-of select="name"/>
                <BR/>
            </xsl:for-each>
    </xsl:template>This is just a sample, syntax was not verified, but I think you'll get the idea...
    Please let me know if this was helpful...
    Cheers,
    Vlad

Maybe you are looking for