Export from LR5.3 Unable to export

Hi at All,
i have a big Problem with my LR5.3, i´m not able to export any Pictures.
Maybe someone can help me
An internal error has occurred: Win32 API error 2 ("The system can not find the file specified.") When calling from ShellExecuteExW AgWorkspace.shellExecute
Some Information of my System:
i7 4820 3.7GHz; 16GB Ram; Win7 Pro SP1 64Bit
Thanks in advance for your help

This most likely means that the photo has been either moved or renamed outside of Lightroom, and so now Lightroom cannot find the photo.
You should see an exclamation point icon in the rectangle around the photo. Click on that icon, and locate the photo on your hard disk, and then everything should be fine.
Hint: don't move or rename your photos outside of Lightroom

Similar Messages

Error when trying to export images from LR5 to Photoshop CC

When I try to export an image without LR adjustments (original or copy) from LR5 to Photoshop CC, I get this message: "Adobe Photoshop CC cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop CC works with this version of OS X..."
I'm running 10.8.5 on an iMac and have the latest updates of Photoshop CC and LR 5 installed.

Moving to Lightroom forum.

EXPORTING FILES FROM LR5

Using Win7 64-bit O/S. My ususal procedure from LR4 after editing is to export to Elements 9 catalog using the Cntl-Shift-E commmand. I rename the file as it suits me then export to my hard drive location by pressing "Export". I then go to PSE and get the message "New files have been found. Do you want to import?" Clicking yes adds the file to my Library. After installing LR5, I can't import edited files from LR5 OR Photohop (CS5). Similar experiences? Work arounds?

I can't import edited files from LR5 OR Photohop (CS5).
Why not? What happens when you try? Is there an error message?
In my opinion there there is a work around as designed by Adobe:
Use LR5 as your "Organizer" (not PSE), and use PSE as an auxiliary editor. The process is much smoother than what you describe, and your problem goes away. Adobe designed Lightroom to work smoothly with the PSE Editor; but there is no design to allow Lightroom to work smoothly with the PSE Organizer.

Lightroom 6 doesn't migrate Export User Presets from LR5

Tonight I upgraded from LR5 to LR6 (standalone, not CC). My catalog migrated successfully and generally the library and develop modules seem to work fine. But when I go to export, all my User Presets are gone. Any advice on how I can recover my export user presets so that I don't have to manually recreate them all? I'm on a Late 2012 Mac Mini, 2.6/i7/16GB, OS X 10.9.5.

Thank you, that was the problem. They were checked as stored with catalog in LR5, but not in LR6. Once I clicked the checkbox in LR6, I found all my export user presets. Now I assume that if I subsequently uncheck that box, LR6 will create a unique file to house those presets? Does it matter if they are or are not in the catalog? I've got a decent grasp of LR's functionality, but wasn't aware of this and don't know if there are pluses or minuses with either approach...

After upgrading to CC, I can't open a file in photoshop from LR5 interface.

Pre CC I could 'edit in' from LR5, but now, when I attempt to 'Edit in -> Photoshop CC' nothing comes across to Photoshop CC.
Any ideas?

Hi, I need -
OS 9's Finder uses File Type and Creator codes embedded in files to determine how the file should be handled - what program to use to open it, and how that program should process the file.
OSX uses filename extensions rather than File Type and Creator codes.
As a result, it is not uncommon for a file created in an OSX environment to be displayed as a generic unknown-type document when the machine is booted to OS 9; and for Finder to not know how to handle it when it is double-clicked.
If you know that a certain program in OS 9 should be able to open a file, try dropping that file onto the icon for that program (or on an alias to that program) - some programs are capable of trying to open a file done that way; others won't even try.
In most cases, a file created by an OSX app will not be openable by an OS 9 app - this is understandable, given that newer programs often use more advanced formats than older ones, even versions of the same program.
If you know that you will be transporting a file from OSX to OS 9, try saving it in a form accessible by OS 9 - many programs will offer a list of alternate file formats when you do a Save As of the file, or (in some cases) an Export of it.
Question: does the Internet connection (Internet Explorer vs. Safari play any role ?)
It certainly can. If Safari saves a file in a proprietary format, then IE will probably not be able to open it. However, a file saved in plain html should be openable by most any browser.
You might experiment with the settings in OS 9's File Exchange control panel, particularly the ones listed under PC Exchange. Adjusting some of these, or creating new linkages, may allow OS 9 to handle files which are openable by your OS 9 programs, but which are not identifiable by Finder.

Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but

Running Lightroom 6 on Windows machine (after having upgraded from LR5... While attempting to add or change music in the Slideshow module, LR unexpectedly quits. After several attempts at this, LR6 won't even launch properly...shows the splash screen but that's it. The program is buggy...need an update/revision quickly!!

If you're on Windows, check out a free program called Audacity--it's fantastic. With Audacity the process of converting a 48.000 kHz to 44.100 kHz is as simply as opening, changing the sample rate, and then exporting again, as an MP3.

Importing from LR5 to Premier Elements 13

Sorry, I did not see a forum for Premier 13, so I posted here. I figure if you know Premier Pro, you probably can answer this question.
When I import a still from LR5 with edits, it seems to be imported without the edits. How do I get the photo imported with edits?
Also, must I resize the photo for best quality in Premier Elements 13 before I import it???

StevenNG wrote:
Hi Bill,
Thanks for your reply.
I understand that edited data in LR5 is stored as a set of directions maintained in the catalog. Is this the "sidecar" you speak of?
All of my edited photos, whether edited with LR5, Photoshop, or any of my other plug in programs, look great. So, presumably the data is being properly stored in the catalog.
OK. So, you say that PrE won't see this data. I understand, although it makes no sense as these are Adobe products, and should work seamlessly. Be that as it may, I need to get edited photos into PrE.
When I right click on the photo and choose export, there is no option to "Export to PrE". I'm not even sure you are saying I should EXPORT photos to PrE. I thought I IMPORT photos via the Organizer, which is what I am doing. And, as you said, PrE is not "seeing" my edits.
Also, still getting the black bars on right and left side. I will look over what ATR sent, and see if that resolves any issues.
Thanks.
Steven
"Is this the "sidecar" you speak of?"
No. Lightroom normally saves all the work you do in what Adobe calls a "catalog" file. On a PC it ends in ".lrcat". The work pattern for photographers that do not use Lightroom, use Photoshop instead and elect to use RAW formats end up processing their files through Adobe Camera Raw or "ACR". In that case, the adjustments are not saved in the original file, but a "sidecar" file of the same filename, but with the extension of ".xmp". For some, like a pro that is sending a RAW image file through the internet to a client, the pro's work will go with it in the .xmp file. To make it work a little better for some, Lightroom can make use of the .xmp file.
"All of my edited photos, whether edited with LR5, Photoshop, or any of my other plug in programs, look great. So, presumably the data is being properly stored in the catalog."
Of course they look good. In Photoshop, you can make your changes, including plug-in changes, and they will disappear if you don't do a "Save" or "Save as..." If you start in Lightroom and want to edit in Photoshop (with plug-ins) you have choices in the "Edit in" dialog for working on copies or originals. Most don't like altering their originals so usually pick "Edit copy with Lightroom adjustments".   When you end the Photoshop and Lightroom work, if set up right, it comes back to Lightroom when you Save and exit in Photoshop. It should be the third iteration: Orginial, copy to Photoshop and image back from Photoshop.
"Be that as it may, I need to get edited photos into PrE."
I won't defend or explain Adobe's ideas of how things should work, but there is no "Export to.." or "Edit in.." process for directly going to any video editor, including PrE. The logic is different for video editing. But there are several ways getting still photos to PrE. Once you do all your work in Photoshop, plug-ins and Lightroom, the finished product is saved somewhere where you put it. If the image has extra Lightroom work, you have to "Export" a final/finished product. There is no "Save" in Lightroom.   Skip Organizer and go direct to PrE and follow the "Add Media > From Files or Folders" sequence. I do it in batches with copies for speed and convenience. I can explain that more if you want.
"Also, still getting the black bars on right and left side"
That is a function of mismatch between what cameras, TVs and video project think make the perfect rectangle. Our expectation now is that TV's are widescreen in a ratio of 1920x1080 or 16x9. To get your your stills to match, it has to be cropped to that ratio. Re-sizing is a different process where an image of a few thousand pixels up and down can be reduced to fewer pixels. It can be used in ways to re-size to a ratio that fits, but it is not the same as having control in cropping.   I find it better to do the cropping with the Crop tool in the Lightroom Develop module and I ignore re-sizing.   I often go a step further and make sure my camera is set to take photos at 16x9.
I'm going to be away from this until much later, maybe tomorrow. If you want to continue with the Lightroom to PrE flow, it is what I do all the time for both photos and videos. I use Photshop Elements, Topaz and Nik plug-ins. It is a delightful system. My usual output is for Vimeo and I can show you some examples. I've worked out a pattern where everything starts in Lightroom and works through PrE.
The next step for me would be to understand what you intend to deliver your project to. A TV, YouTube, DVD, iPad or what? Then perhaps we can get a project set up that will accommodate that, fill it with photos and get something done.
If you're serious, I would be looking at tutorials here:
Learn Premiere Elements | Adobe TV
And here:
Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

Best file format to send from LR5 to PSE10

What is the best file format to send from LR5 to PSE10 - PSD, TIFF or JPEG? I want to be able to post the picture on Flickr after editing.

I always find PSD to be the most versatile for preserving layers but others choose the much larger tiff files. PSD produces a good master file from which any number of jpegs can be ex[ported in future.
You need to start the round trip from LR as follows and use the save command (Ctrl+S) not save as:
1) Ctrl+E in the Library to export selected image with develop settings (I choose PSD)
2) Edit in Photoshop; then Ctrl+S to replace (overwrite) Lightroom export copy
3) Ctrl+W to close in Photoshop and update Lightroom thumbnail.

Please Help! How to save exact edits from LR5

Good Afternoon All,
I have been doing many edits in LR5 and I am losing something along the way...this is what I have been doing....
The image is edited in LR5 (exposure,blacks,whites etc)
The image is edited in Photoshop (spot heal)...(copy with lightroom edits)
Edits made in Photoshop are saved back to lightroom (not sure saving method here?)
Final product is exported from LR5 to email (sRGB /JPEG)
The blacks in the image look VERY different once emailed from the Mac Computer. When viewing on the IPAD, Laptop, Mobile devices these images dont look exactly the same prior to being sent via email.
Any help much appreciated!

Hey sorry, I am coming back to the post and saying that it didn't work. I was exporting as sRGB...and now when I upload it to facebook or my website it is not uploading the same...
I thought that it worked because it was cropped small but when I enlarged it the picture looks distorted as if changes were made and the background looks faded. I used a black background for my pictures and you are able to see several creases in the background. I would like the background of the picture to be black as well as any types of changes that I make within ANY picture I want to be able to export it as well as be able to change it to any size
this is becoming frustrated...

Don't know to transfer photos from LR5 to iMac.

I was wondering if someone could tell me how to transfer Photos from LR5 through my iMac to my iPhone5.

Lightroom Help | Export files to disk or CD
http://tv.adobe.com/watch/learn-lightroom-5/exporting-saving-your-photos-as-jpegs/

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe-Unable to locate component - "this application has failed to start because CoreFoundation .dll was not found," Reinstalling did not fix problem.

Everytime I turn on my computer running on Windows XP, a message appears from AppleSynchNotifier.exe - Unable to Locate Component -
"This application has failed to start because CoreFoundation.dll was not found. Re-installing the application may fix this problem.
I uninstalled and re-installed itunes and the message still appears.
How do I fix this??
Thank you

With that one, first try uninstalling and reinstalling your MobileMe Control Panel for Windows, robin. Does that make the error go away?

Can't access any photos in Lr after upgrade from Lr5 to Lr5.3.

Just upgraded from Lr5 to Lr5.3. Now can't access any photos in Lr. I suspect a catalogue issue. Any suggestions?

"can't access" ??
By what method are you trying to access these photos? What module of Lightroom are you in when you try this? What exact steps in Lightroom are you using ... please use the Lightroom name of the steps, as technically there is no step called "access", so I honestly have no idea what the step is that you are trying. What happens when you try to "access" the photos? Is there an error message?

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?

Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
       try {
            Class.forName("org.gjt.mm.mysql.Driver").newInstance();
            Connection c = DriverManager.getConnection(
                                                       "jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
            Statement Stmt = c.createStatement();
            int count = Stmt.executeUpdate(cmd);
            if(count>0) {
                 System.out.println("count: " + count);
        } catch (Exception e) {
            e.printStackTrace();
    }That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful.

Price in Euro for an update from LR5.6 educational version to LR6 educational version?

Does somebody knows the price in Euro for an update from LR5.6 educational version to LR6 educational version? Thanks and Regards

All right. I've managed to get my iPad running again with IOS 7 now.
As an additional tip for anyone who might need the intel : I had to click on "restore" in iTunes 3 times to get it done. First time to launch the process, then a second time after a 75 min download, and a third time after whatever task iTunes/iPad had just finished doing... All this without any prompt. I mean iTunes did not give me any clue what to do next. It just stopped doing anything each time.
Thanks again Ralp for the password tip : I have skipped everything as advised.
Let's hope using this new OS won't be as painfull as installing it.
Take-away:
It is not possible to upgrade an iPad 2 from IOS 5.1.1 to IOS 6.x. All the web is chatting about the impossibility to downgrade to IOS 6, yeah, yeah... It's impossible to upgrade too.
Attempting to do such an upgrade from iTunes, using shift+restore with a genuine ipsw file downloaded from Apple servers will make your iPad unusable (locked in "recovery mode"), with no other choice but to upgrade to IOS 7.
There's no early warning from iTunes about all that. It starts the upgrade process then aborts it, leaving the iPad gets locked into "recovery mode". Period.

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

I have CS5 and LR5. they will not talk anymore. Everything was working 5 days ago. I can no longer access CS5 from LR5 edit, then drop it back into LR5. Need support

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop ("CS5" won't do for instance; we would need CS5 vers 12.0.2 or whatever) and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Export from LR5.3 Unable to export

Similar Messages

Maybe you are looking for