Export from Mac for Windows Media Player - square pixel widescreen

Hello:
I'm working with a square pixel wide screen iPad animation video. I built comps in AE and am editing in Premiere. I'm having issues with playback in Windows Media Player. Keyframe interpolation and cross dissolves are causing glitches. My pixel ratio is 872x486 And I want to export from Premiere with better results in WMP.
Your help with export settings is greatly appreciated.
Regards

Hi:
Thanks so much for your response.
my sequence settings are
see attached
My export settings
see attached

Similar Messages

  • EXPORT LONG FILES IN 1080p for Windows Media Player

    Hello, need some help in exporting and encoding some large files from Premiere CS6.
    We have 4 Sequences, each totalling 45minutes in length and in 1080p (ProRes422).
    We need to export and encode for Windows Media Player as quickly as possible.
    Looks like each export is going to take over an hour from Premiere as "Match Sequence Settings"
    -keep in mind there is NO AUDIO.
    Once it's out of Premiere as an MPEG, I can transcode to any format. Ultimately WMV would be optimal,
    but we need to transcode the MPEG into a MOV file before 'Episode' will accept it, just to make the WMV files.
    Target files: (4) 1080p Windows Media Player compatible files
    Does anyone have a better workflow workaround? Midnight hour and need help!
    Thanks in advance,
    Dan

    Thanks Jim, I can't export to WMV out of Premiere or Media Encoder. I use Episode to make my WMV files, and since Episode doesn't take MPEG in from Premiere (sigh)
    I have to first make them in Quicktimes..
    But yes! Anything Windows Media Player can handle... should I just go with the 5GB MPG files? No way for me to test, I'm on a Mac and these are playing on a PC
    thanks for your help

  • Streaming Video for Windows Media Player?

    I have a website with steaming video that only opens in quicktime and I need the video to also open in Windows Media Player for people who only have access to a PC and do not want to deal with Quicktime downloads. Does anyone know how to do this on a MAC? I use FCP 5, Compressor, ect.
    G4, Dual 1.42 Ghz, 2 GB RAM   Mac OS X (10.4.5)  

    I have a website with steaming video that only opens
    in quicktime and I need the video to also open in
    Windows Media Player for people who only have access
    to a PC and do not want to deal with Quicktime
    downloads. Does anyone know how to do this on a MAC?
    I use FCP 5, Compressor, ect.
    You are going to need to have two versions of the video file. One for Mac Quicktime users and one for WIndows Media Player users.
    WMV Studio Pro looks like it could meet your needs.
    http://www.flip4mac.com/wmv.htm
    However you will need a Windows Media Server to stream the WMV file otherwise it will act as a download only.
    iFelix

  • Downloading plug-ins for windows media player

    i'm a brand new mac user -- bought a macbook less than 24 hours ago. i have not been able to trouble shoot installing plug-ins for windows media player. if anyone can advise, i would be most appreciative.

    Windows Media Player for Mac was discontinued more than a year ago by Microsoft. They recommend using the free Flip4Mac player <http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia >.
    A good addition to your arsenal of media players would also be the stand-alone VLC Media Player <http://www.videolan.org/vlc/>. It's a Swiss Army Knife of media players.
    Hope this helps!
    bill
      Mac OS X (10.4.10)   1 GHz Powerbook G4

  • Transferring from RealPlayer or Windows Media Player

    Can one transfer music directly from RealPlayer or Windows Media Player into iTunes? I downloaded some songs into RealPlayer then burned them onto a CD, then tried to import them into iTunes but iTunes would not recognize some of the songs, so I would like to transfer directly from these other player programs into iTunes (and have them go into iTunes in the correct format for transferring to an IPOD. I haven't bought an IPOD yet. I am just searching this all out to make sure it is going to work the way I hope.

    No way to know, though a RM or WM player would require Real and Microsoft to program one.
    There is a chance this will happen with the SDK coming in Feb.
    Those files can be converted to an iPhone format (ie Quicktime) providing you have a converter and there are no DRM restrictions in place in the file.

  • Plugin for Windows Media Player is not working with Firefox 4 on Windows 7

    I updated my Firefox to the latest version 4 yesterday, but since this time seems plugin for Windows Media Player not working anymore. When I visit some website with embedded video - like [http://www.ta3.com/sk/live this] - the window with WMP is not displayed and no video is playing. The website reports: You don´t have any plugin for playing of this video.
    I reinstalled the plugin for WMP several times - with no success. This problem is on all webpages with embedded video for WMP. The installation of WMP plugin is successfully finished, but no video is playing. I checked the “plugins“ folder in the installation directory of Firefox and everything seems to be OK. Where is also the problem? Please, help me with solving of this problem...
    My operating system: Windows 7 (64-bit)

    I just saw this posted to the mozilla.support.firefox newsgroup in the topic,<br>
    [http://groups.google.com/group/mozilla.support.firefox/browse_thread/thread/f381fb349c4d109d/69bef0011240e600?hl=en&ie=UTF-8&oe=utf-8 Windows Media Player will not install in Firefox 4] <br>
    ''Just for the record, the extension that conflicted with Windows Media Player is named: Real Player Browser Record Plug-In 14.0.2''
    <br>..... so try [[Troubleshooting extensions and themes]] to see if a Firefox extension is conflicting with the WMP Firefox plugin.

  • Is there a plugin for windows media player for my android phone

    is there a plugin for windows media player for my android phone

    There is no Windows Media player plugin for any browser on Android. If you are lucky download the file and see if any of media players on the system can play the file.

  • DRM for Windows Media Player on the ipod

    My ipod is worthless, if it can't play files with DRM for Windows Media Player. My library, that offers this files for download says, it would cost 50.000 dollars to provide also ipod-compatible files. Because they can't spend this money, I will need a new mp3-player!

    The specs for the iPod (box, website) are pretty clear about what formats it supports. Unfortunately, protected WMA files are not supported.
    If the rights you have for those files includes burning them to an audio CD, you might want to do that.

  • Best settings for exporting to play in Windows Media Player on Powerpoint

    I'm trying to export from FCP X by sending clips to Compressor 4.04 however the online lessons on lynda.com - my go-to source - and in Compressor manuals don't appear up-to-date with the actual latest revisions and I'm confused about whether to use QuickTime Export Components to get video that will play instantly in Windows Powerpoint either if its running on a Sony PC or being projected on a big screen (not HD).
    Also lynda.com says 10,000 bit rate is best but the version used in the lesson limited one to 10,000 while the update goes past 30K. Which setting will work best for my purpose?
    Some help on these settings for this novice Compressor user sure would help me make my deadline. My deliverable to a client is a collection of clips that play in the Windows Media Player.  thanks
    Compressor

    Are you referring to a Lynda.com Compressor tutorial or one of their many PPT tutorials.
    I agree that 10 Mbs is a nice general quality level – depending on your footage, of course – the content, the lighting, etc. WMV is probably the safest – although MP4 should be good as well,
    Hard to be more specific except to say, Test. A preset that works well for one movie may look not-so-great applied to another.
    Take a short, representative section and encode. Project the output file and see what you think.
    Good luck.
    Russ

  • How can I watch streaming images that are made for Windows Media PLayer on my Mac Mini?

    I'm having problems watching live images from a certain website that uses Windows Media Player. Earlier I used Flip 4 MAC and had no problems, but all of a sudden i can't watch the pictures anymore.Updating Flip4Mac didn't help! Who can help me??

    Hi arnienelly,
    Welcome to the HP Support Forums.   I gather that you are getting the HP Rewards pop-up on your computer.
    Did you follow the instructions that Ciara_B gave in her post directly above yours?  If so, what was the result?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Export for Windows media player

    What is the safest codec to export a video to be shown on a PC with Windows Media Player?  I have Compressor and Adobe's Media Encoder s well as Mpeg Streamclip on my Mac.
    Thanks.

    pcalvin wrote:
    I have AME, but it doesn't list a WMV codec. 
    Sorry, my mistake .... WMV through AME is Windows only. You will need Flip4Mac to output WMV.

  • Exporting for Windows Media Player/MPEG (help in translating mixed message)

    So a client of mine had an unusual request today. He's been asked by some tech folk who are doing 'commercials' in the theater lobby to provide them with clips with these specifications (and I use that term loosely):
    MPEG files that are non-compressed and play in Windows Media Player (no Quicktime allowed) and are Audio Enhanced. Needs to be burned on a CD not a DVD.
    Yeah, sounds like folk who have no clue as to what they want and are trying to pretend they do to me too
    So...any ideas on what they really want? And is it best to export via Compressor or invest in that Flip4Mac?
    I'm probably going to get a phone call from the tech folk on Monday and want to be a bit forearmed w/some idea of what the heck they REALLY mean!

    Yup, that's why I'm so perplexed by their specs. Kinda like asking me to make a Photoshop picture that's bright and and can be printed big
    Since I don't ever deal w/WMP (shudder) was wondering if their gobbledeegook actually made sense in another realm (glad to hear it doesn't seem to).

  • Cant find right media player on Mac for Windows Media Mpeg-4 files

    o Must transfer WMP mpeg 4 files via bluetooth to mac
    o Have tried DivX converter = "unknown error (-2041)
    DivX player = nothing, just blinking pause button
    Flip 4mac (WMV) = won't read (won't even make itself available as option for file)
    VLC = picture but no sound (yay)
    Windows Media Player = won't read (won't even make itself available as option for file)
    Quick time = "invalid sample description found in movie"
    MPlayer 0SX2 = picture but no sound (yay, and yes volume is turned up on all devices)
    It's only a few files stuck on broken Sprint PPC 6700 which I am exchanging for new one but want to preserve a few short home movies. Can't hook up w/ windows pc because that's the part that's broken (cable jack) and must use blue tooth, my windows pc has no blue tooth. Files transfer and play but at best it's just video and no audio.
    Am off to store for blank cd to see if I can burn files to disc on mac and a memory card (for phone) for temp back up. But don't know if that will solve problem, just band-aids.
    thx

    Hi Tanner,
    My guess is that 10.4 does not recognize the .sitx format that previously worked on my 10.3
    Mac OS X 10.4 no longers comes with StuffIt Expander. You'll need to install that to be able to use .sitx files.
    http://www.apple.com/downloads/macosx/systemdiskutilities/stuffitexpander.html

  • Encoding iMovie files for Windows Media Player

    iMovie 11 / 9.0
    Mac OS 10.6.8
    I edit audio/video in iMovie (currently the only program I have) and need to output for streaming on the internet. Most of our subscribers are using older versions of Windows Media Player and as I understand won't be able to play MP4. I couldn't play the MP4 using Windows Media Player 9.0, "invalid format" error.
    What software could I use to convert MP4 to a format for streaming on the internet that our subscribers play using WMP? Should I save the file out of iMovie in a different format to convert?
    I have Adobe Media Encoder 4.2.0.006 but my options are h.264 or flash, got error messages when I tried to "Edit Export Settings".
    Thanks

    The easiest way is to upload video to YouTube and embed videos on your site from there. This way you don't have to worry about which version of Windows, which version of Internet Exlorere, etc.
    Another way, ask your users to install QuickTime For Windows. Then export normally,
    Another way, get one of the paid versions of Flip4Mac, and you can convert files to wmv using QuickTime Pro or MPEG Streamclip or Compressor.

  • Converting QuickTime to format for Windows Media Player

    I have some QT movie clips on my Mac that I need to play on a PC which does not have QuickTime installed. The computers I need to use these movies cannot have QT installed on them because my employer does not support QT, only using Windows Media Player.
    So, how do I convert the QT clips I have on my Mac in to something that will play on a PC Windows Media Player ? Is it possible? I'd like to convert them, put them on a CD or DVD and then play them on the PC using Windows Media Player either from the CD/DVD.

    You could use Flip4Mac with iMovie. Which you probably have. It's easiest with QuicktimePro though.
    Flip4Mac PlayerPro converts WMV to mov ($49)
    Flip4Mac Studio converts MOV to WMV ($99) and includes PlayerPro too.
    Flip4Mac Studio Pro adds 2 pass encoding (more control over data rate) and WMV HD (HiDef) ($179)
    The Flip4Mac series are all plugins that work in other programs QuickTime based programs.
    You'd open your MOV file in iMovie for example and use the Share export feature Advanced and save as WMV. It'll ask you for settings which depends on what you're actually using the WMV for (broadband, dial up, play from a PCs hard drive).

Maybe you are looking for

  • Maintain Subscreen for Coding Block

    Dear Guys I have a requirement to create a subscreen for a FI transaction. I know that this can be done using OXK1. I have already created a subscreen. But I want to know that how can I link that subscreen with a particular Transaction. e.g I have ma

  • Syncing MP4 files with iPad

    I have some HD videos I took with a GoPro camera in a MP4 format.  When I try to sync them with the iPad, I get an error that the video format is not supported by the iPad.  I tried a free converter (online) but the quality of the conversion made the

  • Auth. obj. controlling options Create - Change of Table Entry for SE11

    Hello, Could someone please guide me to the authorization object/s which controls the options : Create - Change reached by trans. code SE11, Change, Contents (Ctrl + Shift + F10) , Execute (F8), Table Entry, Create - Change. Thank you in advance for

  • Installing Coldfusion problem

    A while back, I successfully installed the developer's edition of ColdfusionMX on my Windows 2000 PC. I uninstalled Coldfusion due to various reasons but I now need to re-install the app. I attempted the install and the following occurred on the inst

  • HT201304 I just can't figure this out . how can I do a restriction on my ipad help me please

    And I cannot get rid of games the once that being downloaded help please