Export from Quicktime...and...no sound. Why?

I have a 16.9 meg movie file and when I export it from Quicktime there's no sound. Why is this, and is there any way around this? I've tried using MPeg streamclip to export it, and it will, but the file ends up being bigger than I'd like. I'd like to shrink it down to about 4 or 5 megs.

You cannot export the sound from a muxed file like an mpg file, as this article from Apple states:
QT Mpeg Limitations
Fortunately there is a workaround this limitation, in the form of this freeware that will export both the video and sound from mpegs:
Mpeg StreamClip

Similar Messages

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

Recently upgraded from Snow Leopard to Lion then Mavericks. I have Final Cut Express and when I export to Quicktime, and open to play the movie, Quicktime starts to "convert" it? What is this about????

My existing movies are all the following types straight from FinalCut
Apple Intermediate Codec, 1920 × 1080, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
This particular movie is 6.66 Gb
The new Quicktime player in OS Mavericks converts these to the following format:
Apple ProRes 422, 1920 x 1080
Linear PCM, 16 bit little-endian signed integer, 2 channels, 48000 Hz
And a movie size of 6.48 Gb
Please, please can someone tell me why?

Exporting from Quicktime for optimal editing in FinalCut Express

I've read that it is recommended to export H.264 for best quality in Quicktime, but Final Cut Express doesn't play H.264 in real time. It forces you to render if you want to edit in the timeline. What is the best format to export from Quicktime in to enable real time editing in FCE?

To convert the file so that FCE doesn't need rendering you need QuickTime Pro and do the following:
- open the file
- menu File > Export...: then select +Export: Movie to QuickTime Movie+ and click Options.
- In the +Video > Settings+ dialog select:
- Compression Type: DV/DVCPRO-NTSC (or DV-PAL) and make sure that:
- Frame Rate: 29.97 (or 25), Quality is Best, Scan Mode: Interlaced, Aspect Ratio: 4:3 (or 16:9 if anamorphic)
- In the +Sound > Settings+ dialog select:
- Format: Linear PCM, Channels: Stereo (L R), Rate: 48000, Quality: Normal, Sample size: 16 bits
The result is a .mov file (not .dv) that doesn't need rendering when imported to FCE to a sequence with setup DV-NTSC (or PAL).
Piero

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

I'mtrying to upload my photos to shutterfly I've gone to file and export then the window gives me the option of file export webpage quicktime and slideshow . on my macmini I have shutterfly on there also how do I get this on my new mac

I go to file and export then a window appears with file export, webpage,quicktime and slideshow. On my mini I have shutterfly as an option and don't remember how to do it. What do I do to input this info so that shutterfly becomes an option

Hi Barbara
Are your photos in iPhoto or are you using some other Photo Software?
The latest version of iPhoto is a lot different than iPhoto 6 for example. In iPhoto 06 you could burn the Originals from your User Picture Folder using Finder, while in iPhoto 11 it is best to burn them from within the iPhoto Application.
Open iPhoto and select the Event(s) that you want to burn onto the CD, then select Share on the menu bar and click Burn in the drop down.
http://www.apple.com/support/iphoto/
Then again, maybe you got a bad batch of blank CD's and need to try another?
Dennis

Exporting from FCP and using Compressor at the same time?

Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

Only in FCP 7.

Exporting from Quicktime to reduce file size

I'd like to export from quicktime to a smaller file size. That is, I have a 16.9 meg file I want to optimize for my website. When I try exporting it using the share function, there's no audio on the exported file. I've tried the Export function as well, using Movie to Quicktime movie settings, and the default H.264 compression. Same result...no audio. What settings should I use that will retain audio and shrink the file size so it'll load faster? Thanks.

QuickTime Pro can't extract audio from MPEG-1 files (muxed) so only the video is converted.
MPEG Streamclip (free) can export to QuickTime formats and include the audio track.

Firewall nags every time I start an export from quicktime!?

Every time I start exporting from quicktime the firewall asks me to allow incoming network connections and to enter my admin user name and password.
I've checked the firewall in system preferences and quicktime is on the application list and set to allow incoming connections.
I've also tried reinstalling quicktime but to no avail.
Any ideas on what might be causing this?

Go to "/Library/StartupItems/LexSleeper.app” and delete the file. You'll likely need to use an admin password and be prompted to enter your password before the app will be Trashed. Reoboot and the message should be gone and you should be able to empty the trash.
Clinton

Error while Export from 10g and import to 11g

Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu

Jibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).

PDF quality problems exporting from InDesign and Photoshop

Hi There.
I'm having big problems exporting my InDesign files to PDFs and retaining the res. And it's not just the images (I understand about the dpi) it's the type on there too.
I have been exporting as the preset High Quality Print - is this wrong. Are there other settings to ensure the PDF I export retains the high-res quality and clarity?
At the moment it comes out high-res when I export it as a jpeg or eps but not PDF.
I have also noticed the same problem when I export to a PDF from Photoshop.
I really need to create interactive and high quality print PDFs from my InDesign files.
Please can you advise.
Thanks
Karen

I am also having problems with pdfs exported from Illustrator and Indesign recently. I didn't have these problems before, so I don't kno if something has changed in my settings that I am unaware of.
When I use the 'japanese dots' border in Indesign, it shows on the pdf as a kind of dotted line. I'm exporting as 'High Quality Print'. I switched to Illustrator and drew a line with the pen tool, and converted it to a dotted line; it looked just how I wanted in in Illustrator, but as soon as I exported it, the same thing happened.
I have used the 'japanese dots' border in the past, exporting as 'High Quality Print', and not had this problem.
Does anyone have any suggestions?

I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
http://support.apple.com/kb/HT4890

HT4489 Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

Hi all, I have .vcf contact file exported from yahoo and need to import it to cloud. When I try to import it I get an eror "53 contacts not imported, eror reading vCards". Pls help ty

1 - Select the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option. This will take you to the folder containing the original file with that file selected by the Finder.
You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also. Made sure what is found is the large, original version and note were it's located. Search all of your drives with FAF just in case.
If you don't fine the full sized version then the only recourse is to use a file recovery application like SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered. If you find enough files to make the purchase of the software worthwhile buy it and recover the files. However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
2 - book projects are just entries in the library databases and can't be exported to another library.

Is exporting from 8i and importing in 11gR2 is supported?

is exporting from 8i and importing in 11gR2 is supported?
the 8i is on win 2000 and the 11gr2 is on linux5
Thanks
Edited by: user9145417 on 07-Sep-2010 16:53

I experience same problem in Windows. Exp terminated without error. But I assume that's windows fault (isn't it always the case?). It works in Solaris though.
dwdb201:/d1/usr/oracle >exp file=/d1/usr/oracle/ssss.dmp owner=delayuser
Export: Release 9.2.0.7.0 - Production on Wed Sep 8 11:35:56 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/*****@QWDB203_WEB as sysdba
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P15 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user DELAYUSER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user DELAYUSER
About to export DELAYUSER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export DELAYUSER's tables via Conventional Path ...
. . exporting table ADDRESS 806571 rows exported
.

Export from 11g and import to 9i

I have run exp from machine runing oracle 9i to export tables from
another machine running oracle 11g .Export is working fine but while
importing in Oracle 9i it is giving the following errors.
import done in US7ASCII character set and AL16UTF16 NCHAR character
set
import server uses WE8ISO8859P1 character set (possible charset
conversion)
IMP-00003: ORACLE error 96 encountered
ORA-00096: invalid value for parameter plsql_compiler_flags, must be
from among NON_DEBUG, DEBUG, INTERPRETED, NATIVE
IMP-00000: Import terminated unsuccessfully
Can anybody suggest how to do this.
Thanks for your valuable time.

Duplicate post
export from 11g and import to 9i
Srini

Which Mac is best for music purposes? I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in. I'm looking at MacBook Pros; any tips? 13" or 15"?

Which Mac is best for music purposes? I want to mix music recorded from MIDI and live sound, and also want to use Sibelius to play music in. I'm looking at MacBook Pros; any tips? 13" or 15"?

I would think a 15" with the i7 CPU. You can get a 13" with the i7 CPU but the 15" has a dedicated graphic chip along with the intergrated one.
You will also need to upgrade the hard drive to a faster 7200RPM model instead of the standard 5400RPM model that comes with all MBPs. The Sibelius website recommends the 7200RPM or a SSD. You will also be better off installing 8GBs of RAM.
Both of those upgrades can be made after you buy a MBP for much less then Apple charges for the same upgrades and you get to keep the original RAM and hard drive.

Export from Quicktime...and...no sound. Why?

Similar Messages

Maybe you are looking for