Export from Thunderbird and import into OS X Mail

Hi guys,
I'm growing tired of Thunderbird and I want to go back to OS X MAIL.
Problem is : it doesn't import properly.
Here's what I've done :
In OS X MAIL, I select IMPORT and then THUNDERBIRD and finally select the THUNDERBIRD PROFILE FOLDER in my LIBRARY.
It does work and import emails... but not all of them.
In fact, it does not import several local mail folders I have in Thunderbird.
So that's quite a big problem since i need those folders and the emails within them.
I've looked in Thunderbird for a way to export a clean file, but it doesn't seem like there's even an export feature ?
Anyway can give me a helping hand ?
Thanks !

So that's what I did.
I took the files in Library/Thunderbird / ... under my profile
I dumped the .MSF files, and renames the other files to .MBOX
Then I used the IMPORT function in OS X MAIL
It seemed to work and I was quite satisfied !
Until I double check... and realised that a LOT of emails had not been imported, for reasons that I do not quite understand...
So if you know why, please help !!!!!

Similar Messages

Error while Export from 10g and import to 11g

Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu

Jibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
//         which is too wide for the width of the destination column.
//         The name of the column is given, along with the actual width
//         of the value, and the maximum allowed width of the column.
//         Note that widths are reported in characters if character length
//         semantics are in effect for the column, otherwise widths are
//         reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
//          and destination column data types.
//          Either make the destination column wider, or use a subset
//          of the source column (i.e. use substring).

Is exporting from 8i and importing in 11gR2 is supported?

is exporting from 8i and importing in 11gR2 is supported?
the 8i is on win 2000 and the 11gr2 is on linux5
Thanks
Edited by: user9145417 on 07-Sep-2010 16:53

I experience same problem in Windows. Exp terminated without error. But I assume that's windows fault (isn't it always the case?). It works in Solaris though.
dwdb201:/d1/usr/oracle >exp file=/d1/usr/oracle/ssss.dmp owner=delayuser
Export: Release 9.2.0.7.0 - Production on Wed Sep 8 11:35:56 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/*****@QWDB203_WEB as sysdba
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Automatic Storage Management and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P15 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user DELAYUSER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user DELAYUSER
About to export DELAYUSER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export DELAYUSER's tables via Conventional Path ...
. . exporting table ADDRESS 806571 rows exported
.

Export from 11g and import to 9i

I have run exp from machine runing oracle 9i to export tables from
another machine running oracle 11g .Export is working fine but while
importing in Oracle 9i it is giving the following errors.
import done in US7ASCII character set and AL16UTF16 NCHAR character
set
import server uses WE8ISO8859P1 character set (possible charset
conversion)
IMP-00003: ORACLE error 96 encountered
ORA-00096: invalid value for parameter plsql_compiler_flags, must be
from among NON_DEBUG, DEBUG, INTERPRETED, NATIVE
IMP-00000: Import terminated unsuccessfully
Can anybody suggest how to do this.
Thanks for your valuable time.

Duplicate post
export from 11g and import to 9i
Srini

Workflow for exporting xml from Excel and importing into table in InDesign

Hello,
I have worked out how to get data from a .xlsx into a table in InDesign. However, the workflow is still a little clunky and I am looking for way to automate the process further. My current workflow is as follows (files can be download here: http://visual360.co.uk/xml.zip)
xml is exported from .xlsx by mapping the schema (see what_I_get.xml)
assign tags to table and individual cells in InDesign
This is the clunky bit: edit the what_I_get.xml to:
remove the indentation (this seems necessary as otherwise when I get to stage 4, all the imported text is also indented)
add tag for table in InDesign (p10_table)
add tags for individual cells (p10_c11 etc.)
import the produced what_I_want.xml in the structure panel of InDesign.
Can anyone point me in the direction of how to automate step 3 above?
Thanks in advance,
Nick

Hi Mike,
Thanks very much for the reply. I am not at all familiar with XSL/XSLT. I have given it a quick google and it seems like it could be quite a steep learning curve to master. Maybe if I explain the whole context here, it may allow you to point me in the direction of a tutorial that provides a step by step approach to achieve my final goal. Alternatively, you may be able to suggest a whole new workflow.
I am in the process of updating this document: http://www.ncl.ac.uk/students/insessional/assets/documents/IS_Brochure_2014-15.pdf
The tables on pages 10-21 contain lots and lots of repeated information. We want the layout to in this format so that each group of students has all the information relevant to them on a single double spread. However, the challenge of using this approach is that it is very high maintenance to ensure the duplicated information is kept in sync - even using a copy / paste approach.
I was hoping to overcome this by using a single source of data (eg. a spreadsheet) which would then feed into the InDesign. This workflow seems to be overcomplicated by the apparent need to use xml as the "middle-man".
Ideally, I would like to press the export button in Excel and get this information into the the correct cells in the tables on pages 10-21 without a significant amount of manual labour - after all, my reasons for investigating an automated approach in the first place was to avoid the manual entering of data ie. the scope for error...
An alternative approach maybe to skip Excel altogether and just use .xml. However, I am not sure that this is possible as Indesign only seems to allow you to import each element once. Maybe you could correct me here...
I am happy to invest a certain amount of time in developing this approach as once it is in place, it will save a huge of proof-reading time year after year, especially as inconsistencies still persist despite our best efforts to weed them out.
If you could let me know your thoughts on this and maybe identify a tutorial that would help me, I would be extremely grateful.
Thanks again!
Nick

Export from PO desktop / import into Outlook ... HOW?

PalmOne Centro
Windows Vista Home Premium
Outlook 2010
iTunes (latest vestions)
iPhone 3gs
We’ve been trying to export PalmOne desktop info (contacts; calendar; memo) over into our iPhone.
We are not in possession of the Centro phone any more; but we have all the info on a computer.
After multiple efforts and attempts, (including going out and buying our own authorized copy of Outlook, expressly for this purpose) we took the computer and everything into the AT&T store Saturday, being told they could probably assist with the export/import; but after giving it a try, they decided they were unable to help, and suggested we take the operation to the nearby Apple store; we did; a technician there spent a good deal of time working on it.
He concluded that the only option we could use to export PalmOne desktop data into Outlook is to choose “Export to Vcard”; but when doing this, he was only able to transfer one contact at a time. He was unable to find a way to export a batch .. or do a global command .. or select all …etc., etc.
How do we export our contact list [altogether] from PalmOne Desktop into Outlook?
I understand it must go into Outlook first, then into ITunes, and then finally, it can be imported into the iPhone which is already synched to our computer).
A website I found describes the operation differently; advising selection of the “export” option and opening the *.csv file in Excel; the importing it into Outlook; tried many, many different options and selections … what opens up in Outlook is garbled and incomplete.
So that was of no use.
Thanks for any help!
Post relates to: Centro (AT&T)

I just purchased an iPhone and had similar frustrations. Despite selecting all my contacts only the first contact was included in the vCard export. In fact, even when I exported in CSV or text formats only the first contact was included in the export. I tried over and over with similar results.
I was using Palm Desktop v6.2.2. I even deleted and reinstalled it. no luck. I have a fairly new computer running Windows 7. I then tried on an older computer with Windows XP and it worked just fine. I was then able to simply send an email to myself with the vCard file as an attachment. I opened the attachment on the iPhone and clicked on the vCard attachment ... a few more clicks and the contacts were imported.
The key is that Palm Desktop does not export correctly with Windows 7 nor (it appears according to anvanho's experience) with Windows Vista. By the way, another thing that didn't work - I installed Palm Desktop using XP Mode running in Windows 7. the Desktop installed OK but I couldn't get my Centro to sync using XP Mode.
Good luck

Odd frames added to start of audio export from LPX when imported into FCPX

Running into a weird issue exporting audio out of Logic Pro (10.0.6) for import into FCPX (10.1.1) - Logic is introducing extra frames (varies between 2 to 4 frames) at the front of exported audio, becomes detectable when imported back into FCPX.
I do a lot of work where I sync music performances on camera that are recorded in audio and MIDI, and have to deliver remixed audio with picture AND a .MID file that all sync. Workflow used to be shoot video on a C100 and another DSLR with either an audio feed or live mic patched to the camera, while Logic recorded the MIDI performance and any ambient audio via separate mics and pres. Shoot always had some kind of "slated" start marker on camera, in camera audio, and in Logic. Camera edits were edited in FCPX, exported as a Quicktime with the "slate" for a start marker, then audio and MIDI handled in Logic.
This always used to work thru to last fall, when we took a hiatus.
Upon resuming some final shooting in the last two weeks, our audio edits are always running 2-4 frames behind FCPX. It's a consistent offset for an entire export (so there's no drift, no jitter within the files - but the slate tones might be 2 frames and 17 subframes behind and the whole audio file runs behind.) Another export might be 3 frames 2 subframes behind. Always kind of random in the amount of drift - but never more than 4 frames.
Tried a test where I imported just the camera audio in Logic as an extracted audio track, then exported same audio file back to the Quicktime but left the original audio in the video - Logic's exported audio ran behind sync from the original.
Obviously, I'm paying attention to frame rates, sample rates, etc.
As a test, I exported an XML out of FCPX, imported it into Logic, performed some edits, and used the File>Export>Project to FinalCut Pro XML - so everything matched across the board. Opened the export in FCPX - audio ran behind sync again.
If it was just audio I was concerned about, I'd just line it up in FCPX and call it done - but my exported MIDI file NEEDS to be in sync with the picture AND the audio... and wasting time calculating the Logic offset error is a huge detour from getting this work done quickly.
I thought maybe there could be a plug-in issue, but it happened even in the extracted audio from the Quicktime with no plug-ins in any of the signal chains.
Any ideas?

Well… here's a clunky workaround.
It's either a problem with the exported FCPX-XML or the way Logic Pro X interprets the XML.
The simple test here was to put a clip in the FCPX timeline and export it as an AIFF and then export an XML too.
Import the XML into Logic, then import the AIFF as a new track. By default the Logic project is 120BPM. By analyzing the xml-based track and the aiff track, the xml track has an added 164 ticks to the beginning of the referenced video-audio.
Move the playhead to zero, zoom in to the timeline and drag the tick field to 164 then blade all your tracks, then click/drag the bladed tracks to zero. Voila!
It seems to only affect the first audio file. So for example, when I have 10 video clips in my FCPX timeline, only the first audio clip has the added 164 ticks.
Now on to the next challenge…
It's not enough to just de-compound your clips because L and J cuts get referenced to the VIDEO, not the audio underneath.
So… In FCPX you MUST select each clip and choose Break Apart Clip Items from the Clip Menu. Perhaps this is old news but thought I'd mention it here in case others were having problems.
Let's hope Apple steps up their xml game and realizes that when I choose export XML-Audio from the xml popup menu… I want it to send the duration of the audio, not the duration of the attached video.
Ergh! Well… as my friends say… "We're still in the stone age with all this technology."
Happy editing all!

Adobe Dynamic Link or Export from Premiere and load into Encore?

Hi
I'm making some tests about authoring DVDs and Blu-Rays from Encore CS6. My video editions are made in Adobe Premiere Pro CS6.
Looks like I have 2 ways to send contents from Premiere Pro to Encore.
1) I can set all my editions in Premiere Pro, then Export the entire timeline to a MPEG-2 DVD or MPEG-2 BLU-Ray file, then start a new Encore project and import this video file as a timeline.
2) I can finish my editions in Premiere Pro, then use the Adobe Dynamic Link > Send to Encore options. So, it's not necessary to export files, since the task of transcoding is an Encore's task.
Question is: Any advantage of using way 1 or 2??? Thinking about speed to finish the job, is one way better than other?
What do you use do choose?
Thank you for these tips
Gustavo.

Hi Stanley
Thank you very much for your tips. Just one thing:
In Premiere we can choose, for Blu-Rays, the MPEG-2 or H.264 codecs. You mentioned the H.264 Bly-Ray choice.
Any advantage regarding the H.264 instead of the own MPEG-2 coded?
Best Regards and thank you very much again.
Gustavo.

Is it possible to export user settings and import into same environment?

Hi guys,
I exported a user profile settings into a file and triedd to import saved file into same environment where I exported, but I am getting following error
"Login name already in use"
I followed the same process for restoring groups.Exported groups into a file and imported saved file into same environment, I was successfully restored thr groups.But I am failing to restore the user settings.
Any help or suggestions on this issue is greately appreciated.
Thanks in advance!

Importing into the same environment is not supported.
Instead, you could create all the test users in production with all the roles and then deactivate the user, so they are not usable.
After you overwrite the non-production DBs with the production DB, you could then run a script (you will have to create it first) to activate all the users.
Will this work for you?
Segal

How to export projects from imovieHD and import into imovie 09

Hi- I need to export my projects with timeline, audio, transitions (everything) in such a way that they will open in in imovie 09, and allow me to continue working on these projects without having to rebuild titles, transitions etc..
Is this possible in ANY way at all?

Hi
No - this function doesn't exist AT ALL.
Not even if You got FinalCut Express or Pro - This doesn't work.
Advice. Keep project on one platform from start to finish.
• Never up-date anything during process - Pro way of working.
Only Export function - does only move raw unedited material at it's best.
If going to FinalCut from iMovie HD 6 or prev one can copy back to Camera and use
this as a base (track 1) and re-build movier ontop of this. But still not easy.
Yours Bengt W

Putting together a movie with audio. Songs purchased from iTunes and imported into movie. W

Need help with iMovie.
Have presentation for my Dad's funeral. Presentation is a little over 1 hour long and was working fine until traveling to funeral. Now several songs do not play. Some songs are fine.
I have tried restarting iMovie, restarting my computer. I have deleted the songs and replaced them with the song from iTunes. I made sure all song volumes are a 100% and my computer volume is normal. I normalized all audio files. Nothing seems to work.
Funeral is in about 3 hours. Desperate for help... any suggestions.

Hi
One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
You must actively de-select those tracks that you do NOT want to include in the Export.
CCT

When either exporting from Lightroom or importing into Merge to HDR Pro in Photoshop

the color space changes from ProFotoRGB to srgb - how do miantain the colorspcae throughout the whole process? Never had this problem in Photoshop CS6 or using any other software to edit HDR

My CS5 is up to date but my LR 4.3 isn't. I'm updating it now.
I can't find a way to check for updates for the Nik Collection. If updating LR doesn't work I will try uninstalling and reinstalling Nik.

Has anyone successfully exported OAS9i r1 and imported into 10g r2

I have several portal applications in 9i as Rel1 that need to be ported over into 10g AS R2. NEED Help!! any suggestions.

Please check out the forum: Portal General for more specific Portal help
Oracle Application Server Portal
Martin

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish

My Images won't open in Photoshop CS5 when I click on Edit in Lightroom - even though this option has been selected? To edit in Photoshop I have to export image from Lightroom then import into Photoshop. I have other programmes such as NIK and if I wish to edit in these everything works fine.

Same here. I've never had trouble with this function before.
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. I tried dumping PS preferences

UDF Export from OIM 11g R1 and Import into R2

Has anyone ever exported user defined fields from OIM 11gR1 and successfully imported them into OIM 11gR2?
I have tried exporting the user metadata via deployment manager in R1 and importing into a sandbox in R2 and the import fails with the following exception in the log:
<Apr 8, 2013 2:49:14 PM UTC> <Error> <XELLERATE.WEBAPP> <BEA-000000> <Class/Method: LoadDeploymentUtility/displayImportSubstitution encounter some problems: Object specified is invalid.ORCLGUID [AttributeDefinition]
com.thortech.xl.ddm.exception.DDMException: Object specified is invalid.ORCLGUID [AttributeDefinition]
at com.thortech.xl.ddm.engine.SchemaInstanceFacade.populate(SchemaInstanceFacade.java:322)
at com.thortech.xl.ddm.engine.SchemaInstanceFacade.addXMLSchemaInstance(SchemaInstanceFacade.java:253)
at com.thortech.xl.ejb.beansimpl.tcImportOperationsBean.addLastPreviewedFilePrivate(tcImportOperationsBean.java:688)
at com.thortech.xl.ejb.beansimpl.tcImportOperationsBean.addLastPreviewedFile(tcImportOperationsBean.java:664)
at Thor.API.Operations.tcImportOperationsIntfEJB.addLastPreviewedFilex(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy381.addLastPreviewedFilex(Unknown Source)
at Thor.API.Operations.tcImportOperationsIntf_uawk3z_tcImportOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at Thor.API.Operations.tcImportOperationsIntf_uawk3z_tcImportOperationsIntfRemoteImpl.addLastPreviewedFilex(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
at $Proxy399.addLastPreviewedFilex(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
at $Proxy400.addLastPreviewedFilex(Unknown Source)
at Thor.API.Operations.tcImportOperationsIntfDelegate.addLastPreviewedFile(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy401.addLastPreviewedFile(Unknown Source)
at com.thortech.xl.webclient.actions.LoadDeploymentUtilityAction.displayImportSubstitution(LoadDeploymentUtilityAction.java:1975)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:450)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:185)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
at com.nexaweb.server.servlet.NexawebRequestDispatcher.doClientRequest(NexawebRequestDispatcher.java:347)
at com.nexaweb.server.servlet.NexawebRequestDispatcher.forwardClientRequest(NexawebRequestDispatcher.java:114)
at com.nexaweb.server.servlet.JspProcessor.processRequest(JspProcessor.java:137)
at com.nexaweb.server.servlet.RequestProcessor.dispatchRequest(RequestProcessor.java:463)
at com.nexaweb.server.servlet.RequestProcessor.processClientEvent(RequestProcessor.java:710)
at com.nexaweb.server.services.protocol.NexawebProtocolHandler.handleProcessEventCommand(NexawebProtocolHandler.java:1026)
at com.nexaweb.server.services.protocol.NexawebProtocolHandler.dispatchCommand(NexawebProtocolHandler.java:140)
at com.nexaweb.server.NexawebServer.doService(NexawebServer.java:420)
at com.nexaweb.server.NexawebServer.doGet(NexawebServer.java:335)
at com.nexaweb.server.admin.ServerAdmin.callNexawebServer(ServerAdmin.java:379)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.nexaweb.loader.xMethodInvoker.runInThread(xMethodInvoker.java:69)
at com.nexaweb.server.api.admin.ServerAdminProxy.callNexawebServer(ServerAdminProxy.java:551)
at com.nexaweb.redirect.RedirectServlet.doGet(RedirectServlet.java:18)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Any ideas or suggestions? Thanks.

There are multiple ways to do this. ODI, Essbase Studio or SQL interface in load rules are three. ODI is not free, but the other two I mention are. There are a few developers I know that prefer flat files as it is easier to trace back issues, but most o us use a SQL approach. Both Essbase Studio and Sql Interface can use either PDBC or OCI connections. Of course OCI connections are faster.
While neither Studio or load rules has a scheduler associated with it, you can use the windows/cron/custom scheduler of your choice to schedule the process to run. Note that neither will run stored procedures/packages but just read from tables/views.
The batch interface you would use is called MaxL and it interfaces with ODI, Studio and Load rules (Sql interface)

Export from Thunderbird and import into OS X Mail

Similar Messages

Maybe you are looking for