Export functions not working right

I have been happily using Jeffrey Friedl's "Flickr Export" plugin as well as a plugin to export LR files to Pixelpost blogs. Both were working perfectly until this morning. Now, neither of them work. I've reinstalled both plugins, and that didn't help. It seems it might be a problem with LR because both of the plugins stopped working at the same time.
Any ideas?

I am struggling to identify 'gmail' as my carrier in Lightroom. Tried Kelby's method several times but no luck.<br />Advice<br />THANKS<br />Gordon Hill <[email protected]>

Similar Messages

Export function not working in Internet Explorer

so i've got a report displayed in IE, but when i go to export to any file format, IE opens a new tab and that's it. depending on certain settings (like adding the server to intranet zone), i can get the new tab to say nothing or "Blank Page".
i've tried adding the server to the safe zones, i've played with some tabs settings, i enabled the "run active x" options...
finally i reset all settings of IE to their defaults. i still can't figure out what i'm missing. if i copy the url to another browser the export works fine, as expected. on another machine i found this "rsclientprint 2008" addon so i downloaded
that but i still got nothing.
on a working machine, when i click the export button, a new tab opens with the name of the reporting server in it, it thinks a bit, then that tab closes and i get the "open or save" message in the original tab. on the one that's not working, it
opens the new tab, DOESN'T show the server name and that's the end of it. so it seems like it can't connect to the server on the export function. (but report creation works just fine)
anyone know of anything glaring that i'm missing??
~if this were /. this sig would be funny

good call - i'll try that now.
the app i had installed before was Classic Shell so that Windows Explorer's (win7) left hand pane doesn't jump around on you when you double click.
i just completely uninstalled the application and rebooted. still nothing.
going to do a repair while classic shell is uninstalled. brblol
UPDATE:
so i couldn't run the IE installer (per MS suggestions) because i have a newer version. so i tried the fixer that i found here:
http://support2.microsoft.com/mats/ie_performance_and_safety
and it found the following "errors":
Issues found
Data Execution Prevention disabled
Detected
Enable Data Execution Prevention
Not Run
Security settings
Detected
Reset Security settings
Not Run
Pop-Up Blocker disabled
Detected
Enable Pop-Up Blocker
after fixing, the problem still exists!
~if this were /. this sig would be funny

Export functionality not working in R12

HI,
We have some custom forms that we have upgraded to R12.
But the export funtionality is not working for these forms.
When we open the form, standard funtionality like Menu> Record> Last are not working in R12.
Any body can please help in this.

You should post your question in the eBusiness-forums, maybe here OA Framework

IPhoto 7.0.2 Export function not working

I am using iPhoto 7.0.2. When I select a photo and choose Export nothing happens. No dialog box, no errors, nothing. I used this function hundreds of times with iLife '06. What's up?

Steve
Select iPhoto in the Applications folder and go File -> Get Info.
In the Get Info window you can use the Plug-in pane to remove any 3rd party export plugins that you have not updated for v7.
Also, if there's a plug-in there called
FileExporter.iPhotoExporter
remove it too, but if there's one called
FileExporter2.iPhotoExporter
make sure to leave that alone.
Regards
TD

Export Function Not Working

Help! The export dialog box seems to work. I hit EXPORT and it goes to export. Then the operation gets stuck and the image won't export. Any ideas? Thanks!

It seems as if the Export operation is running - When I go to exit LR, it tells me an operation is still running, do I really want to quit?
No error message, it just never moves from the very start of the export process.
Only one photo at a time and it is not showing up on my hard drive.
This has never happened after thousands of exports.
Thank you for replying - I really appreciate it. Any insight you have would be great!

Export function not working in Lr 5.3 after upgrade from Lr3.6?

I've just upgraded to Lr3.6 from Lr5.3 on Windows 7 and am unable to export photos or create smart previews. I'm suspecting the catalog hasn't migrated properly in some way but can't work out why. Can anyone help please?

JimHess
I've split it into 4 to make it readable hope this works
Cheers

Report Export - Spreadsheet not working for one User: ECC6, SAPGUI710

Hi,
Our setup: SAP ECC6, Solaris10, Oracle 10g, SAPGUI Patch 9
Normal download like List ->export ->Local file is working
But when user click excel icon (list ->export->spreadsheet) it is not working and even it is not giving any error message.
Only one user ID we are getting problem, all other user ids are ok.
There is no issue with his work station or SAP GUI patch level as for other user id on his workstation export function is working fine. One more info with this problematic user id export function is not working in any workstation.
Any thing we need to do with user parameters/user settings or authorization????
Anyone faced this problem eralier . . .
Advance thanks

It is not hte problem with workstation, as for other user ids on his workstation working fine. Also with his user id on other machines also not working.
Regarding trace in ST01, how to switch the trace for other users as there is no user selection option???
Is it ok if I procedd as below:
1. ST01 -> Edit menu ->Write to database
2. Selected all trace components
2. General Filters ->under "Trace for User Only" I give this problematic user id.
3. From menu "Goto" ->"Save Trace file in" I give this user id, client and time
But I am getting following message when I click "Analysis"
No records that correspond to these search criteria found
regards

Command key not working right in several applications

All of a sudden, some functions are not working right, i.e., in PhotoShop when I select the Zoom key I get a minus rather than the usual plus. In Date and Time, I started getting a 24 hour clock. If I go there in System Prefs and change to 24 hour clock, then the readout on my menu bar is for 12 hour clock. Sometimes when I use Command-Q the machine asks me if I want to close all programs rather than just the one I'm attempting to leave. What is wrong?

Hi n,
I have no idea if this might work, but I'd reset the PRAM and SMC.

My keyboard does not work right how can i fix it

I have the iphone4 I bought from Verizon about 2 months ago and now my key board will not work right how do I fix this? I have tried to reset factory settings and all of that but it did not work! If I can not fix it my self will Verizon send me a new one ?

That's a very important component of your phone, tiffanymoyle. Let's see what we can do to get your keyboard back up and running correctly. What issues are you encountering with the keyboard? Do certain letters not register when pressed? Does it make a difference if you turn your phone to function in landscape mode?
NicandroN_VZW
Follow us on twitter @VZWSupport

Extend studio extensions do not work right in DW CC

I have Flexi Layouts Pro 2 and JQuery Media Pack installed within the latest Adobe Extension Manager CC and I cannot edit them or get them to work properly, it's like some of the menus/dialogs are missing or cannot launch. They are licensed products however, it shows a BUY bar on the top of each application bar as if they are trials. The editing function does not work in any of the JQuery Media Pack apps.
Windows 8.1
I have re-installed the DW CC software and updated the CC Manager
reinstalled the extension and air components
I have reset licenses
Anyone have a solution or have the same problem?
I really need help here --- these apps are not cheap

Seems with CC 2014.1, you must disable (uncheck) "Live View" option. Once I did that, the dialogs worked
extend studio extensions do not work right in DW CC

After upgrading to maverick; help & other functions not working

After upgrading to maverick; help and other functions not working?

Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

Is there any way to redownload iOS 5 my iPod touch 4 th generation white 32 gig is not working right?

My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.

You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

Export functions not working right

Similar Messages

Maybe you are looking for