Export GPO Backup Error

Using SCM 3.0.60.0, I have imported 2 Custom Baselines from GPO Backup folders. When I go to export those same baselines in the GPO Backup format, 1 of them works fine, the other gives me this error:
Setting Save files in this format has following errors:
Rule Save files in this format has error: The string is missing with ID: '
' in setting 'Save files in this format'.
 Any help figuring out what is going on here?
-Kyle

Anybody?

Similar Messages

  • Export GPO Backup Missing Settings

    Hi. I'm trying to use SCM 3.0 to implement the WS2008R2SP1 Domain Controllers Security Compliance 1.1 in a newly promoted DC.
    The baseline has 393 unique settings but when I tried to export it to a GPO backup folder and then import it back to SCM, I only get 220 unique settings. Is this a bug or a default behavior of SCM 3.0?

    Hi,
    I have just seen you thread and wonder if you have found a solution.
    I have noticed exactly the same behaviour on trying the member server policy. If I duplicate the policy, export it as a SCM Cab and then re-import, there are exactly the same number of settings, but with a GPO backup it misses 67 setting and creates 3 unique
    ones!

  • Error when trying to export GPO Backup Folder

     Setting Default file format has following errors:
    Rule Save Word files as has error: The string is missing with ID: '
                  ' in setting 'Default file format'.
    I am trying to export a Group Policy using Microsoft Security Compliance Manager and I get this error
    Any ideas as to what is wrong??
    thanks
    many thanks

    Hi Martin,
    We are using OAM also. So, It might cause these errors. We will try to Install it from the beginning....
    Thanks....
    But, I have another issue.
    1) We put our new changes by running patch_jboss.cmd file. After doing this, if we run xlStartServer.bat on <OIM_HOME>\bin directory, we can see all the changes.
    But, if we start jBoss using <JBoss>\bin\run.bat file, we can not see any changes. I try to clear cache using PurgeCache.bat file. But, it is still not working....
    2) When we start Jboss using xlStartServer.bat file, loggs are not written into <JBOSS>\server\default\log\server.log file. I try to configure using best practice guide. But, it is still not working...If I start JBoss using run.bat file on jboss, it writes loggs to server.log file..
    3) Earlier, when we are doing development, we did not use OAM server to connecto to web site. So, for some customizations, I get the current user's userLogin from
    <bean:define id="userLogin" name = "userMemberOfForm" property="userID" type="java.lang.String"/>..This works fine..
    But, since we are going to use OAM or Windows authentication to connect to OIM web in live, it returns null or empty for "userLogin"....(if we use the above code)...How can I get the userLogin of the current login user....???
    Regards,
    Chaturanga

  • SCM 3.0 - Why does Exporting to GPO Backup and Importing back the same LocalGPO alter the settings so drastically ?

    What I did:
    Specialize a Win 7 computer Baseline (Baseline A)
    Export the duplicated baseline to the GPO Backup Folder.
    Use this the exported GPO Backup within a MDT task Sequence
    Create a new computer with this task Sequence. It completes successfully.
    Export with LOCALGPO Tool the Baseline (BaseLine B
    Compare to the Windows 7 SP1 Baseline copy - (Baseline B).
    Result (see pictures):
        Total unique settings compared: 317
        Total settings in common: 205
        Total settings not in common: 112
    Settings that differ (15): Just one exemple:
    I ask for "Audit System events" Success and Failure (Baseline A) and the result is NoAuditing. Strange isn't it?
    Settings that match (190): Cool.
    Settings only in  Baseline A (57) Just a comment:
    There are a lot of settings with the value: No one. Are these values correctly exported and correctly positioned on the new computer?
    Settings only in baseline B (55) Just a comment:
    There are a lot of characters badly recognized. I think there is a problem with French Language.
    How can I trust SCM with so many errors? What can I do to correct these errors?
    I use Security Compliance Manager 3.0.60.0 with settingLibrary Version 2.0.82001

    After reading  social.technet.microsoft.com/Forums/en-US/720f6515-47fc-4805-8ccb-dc144cb72078/action?threadDisplayName=gpo-backups-import-merge-export-problems I think I've identified that some of the differences come from the Not Defined/Not Configured
    settings not being backed up in the GPO Backup.  I can live with that.
    The other issues are attributed to flaws within SCM 3 regarding GPO Imports...hopefully they'll be sorted out by the team soon.

  • The movie could not be exported because an error occurred. (File already open with with write permis

    The movie could not be exported because an error occurred. (File already open with with write permis
    Never received this error until I updated to newer operating system.

    This sounds vaguely like the Error -49 some people have been getting. It's related to a feature in Time Machine geared towards laptop users who aren't always connected to their Time Machine backup drive.
    This requires using the Terminal app, in your Applications/Utilities folder
    To turn off Time Machine snapshots type in the following command:
    sudo tmutil disablelocal
    The Mac will likely ask for your password, so type it in and hit the return key. The type the word, exit and hit return. Quit Terminal.
    Open iMovie and try doing another export and see if the same error message pops up.

  • Catalog backup error message

    I have LR 5.7. When backing up, I get the error message: LR encountered an error when reading its preview cache and needs to quit. LR will attempt to fix this problem the next time it launches. Does anyone understand what the problem is?

    Nobody can help you without proper system information and details like where you are exporting your backup to, what your work files are etc. Ask in the LR forum and provide all that critical info.
    Mylenium

  • Export the Biztalk error to a file from the Biztalk project.

    Hi,
    I have created console app in VS 2012 to export the biztalk errors from Event Viewer to a text file.
    Here i have used eventlog class to fetch the application log errors on click of .Exe file it will generate the the text file.
    So I need to integrate this .exe or .net code to Biztalk project. How can i integrate this one. Any idea on this - how can i achieve this.
    Biztalk handles error but i need to export that biztalk error which occured in the application in to seperate text file in a location. Because  each time user needs to go to Adminstrative console then to EventViewer->Windows log->Application - >
    to view the Biztalk error. In this case i need to export the errors to a text file from the project instead of going to view error in Admin Console. i need some code samples on how to make it.
    But in .net we can achieve it using EventLog class to export the event viewer appplication log to a text file.As i said in first Earlier.Whether it can be integrate in to biztalk project through Custom Pipeline or any other way.
       

    Hi Vijayan,
    What is the objective of your requirement? Is this just to save user from going through Administrative console
    à EventViewer->Windows log->Application - > Filter event for BizTalk error?
    In this case you can create a custom event log for BizTalk and hold the events related to BizTalk in one node/category. So you’re users can directly to eventlog for
    Biztalk error. (FYI event log can be access without going through BizTalk admin console). So users can view information/warning/error specific to BizTalk in one view
    EventVieweràCustom
    viewàBizTalk.
    No automated steps required, just a simple one off configuration would do the trick. Read the following article on step-by-step guidance on achieving the same.
    Creating a custom event log under Event
    Viewer to log server events
    Or is requirement is due to some access issues you want to accumulate/consolidate all the BizTalk errors into one place so user can see BizTalk evenlog info in one place like
    a text file in a shared location, then the following article can help you to achieve the same.
    http://blogs.technet.com/b/heyscriptingguy/archive/2007/09/06/how-can-i-backup-an-event-log-to-a-text-file.aspx
    But what do you mean by integrate above process in to BizTalk. When you mean by “Biztalk handles error but i need to export that biztalk error which occured in the application
    in to seperate text file in a location”, are you looking to log the BizTalk “application” error/events i.e logging from your applications in BizTalk to a log file ? Then you can consider about using standard logging library like Enterprise
    Library Logging block, or NLog, or log4net. log4net can fit
    well comparing other logging framework.
    Following references can help you on this context:
    Write log file for Biztalk Logging
    with log4net – Sample
    Biztalk and Logging with log4net
    But keep in mind that this is application logging, i.e. logging from your BizTalk applications like logging while processing the message in pipeline/orchestration. But this will
    not log when one of the send port/receive location is stopped. These information are logged into eventlog.
    If you’re looking for application level logging then also know about
    BizTalk CAT Instrumentation Framework Controller. 
    Or if you want to your existing console application which exports the eventlog to text file to be automated, then use the Windows schedule task to run your console application
    periodically and let it export the errors to text file. You can console the export process in such a way that it can export the eventlog entries for the last one hour if you can configure the Windows schedule task to run every one hour to export the logs to
    text file.
    I have given various options, hope you can choose the one which suits your need best.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Exporting Large Backup Set will not pass test - handle is invalid (6)

    I am trying to export and initial backup set for a client on a Windows 2012 R2 server to an external HDD. I have tried this several times with the same error occuring when I test the lmb file of handle is invalid (6). As it takes a while to do each test and the client is a distance from me I am making sure the export is corrct before I have it sent to me to import. I have no encryption on and no Compression and tried single block. I have also turned off UAC but not rebooted.  This is the 3rd attempt and tried on 2 different drives. Anybody any ideas? Thanks

    I can't promise that your backup set is okay, but I've tried on several occasions to use the "test" feature when exporting a backup set.  (We always use encryption and compression.)  It always said the export failed.  However, those same supposed failed exports have all imported just fine.  Now I just export and never test.  The backup set always seems fine. I can say that I've never yet tried an export on Server 2012 though. 

  • Backup error occured, Error code 3700 "hostfile_error"

    HI,
    We are trying to MaxDB database backup to tape and getting below error.
    ===================================================================================================
    ERR
    -24988,ERR_SQL: SQL error
    -104,DBM command impossible at this time
    3,Data backup failed
    Servertask Info: because Error in backup task occured
    Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
    Error in backup task occured, Error code 3700 "hostfile_error"
    Backupmedium #1 (
    .\pipe\backup) I/O Error
    Backup error occured, Error code 3700 "hostfile_error"
    ===================================================================================================
    I went through the previous threads regarding the same error but couldn't find a solution.
    System Info is Win 2008, MaxDB version 7.7.07.14.
    Here is the complete log, please suggest what can be done.
    ===================================================================================================
    DBA Action starts:
    Timestamp: 20110831100408   Function: sda   Object: DATA
    2011-08-31 10:04:08
    Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
    Using connection to Backint for MaxDB Interface.
    2011-08-31 10:04:09
    Checking existence and configuration of Backint for MaxDB.
        Using environment variable 'BSI_ENV' with value 'G:\sapdb\data\wrk\MXP\bsi.env' as path of the configuration file of Backint
        Reading the Backint for MaxDB configuration file 'G:\sapdb\data\wrk\MXP\bsi.env'.
            Found keyword 'BACKINT' with value 'D:\sapdb\MXP\db\bin\backint.exe'.
            Found keyword 'INPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.in'.
            Found keyword 'OUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.out'.
            Found keyword 'ERROROUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.err'.
            Found keyword 'PARAMETERFILE' with value 'G:\sapdb\data\wrk\MXP\maxdb_config.par'.
            Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'G:\sapdb\MXP\sapdata'.
        Finished reading of the Backint for MaxDB configuration file.
        Using 'D:\sapdb\MXP\db\bin\backint.exe' as Backint for MaxDB program.
        Using 'G:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\MXP\maxdb_config.par' as parameter file for Backint for MaxDB.
        Using '300' seconds as timeout for Backint for MaxDB in the case of success.
        Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
        Using 'G:\sapdb\MXP\sapdata\dbm.knl' as backup history of a database to migrate.
        Using 'G:\sapdb\MXP\sapdata\dbm.ebf' as external backup history of a database to migrate.
        Checking availability of backups using backint's inquire function.
    Check passed successful.
    2011-08-31 10:04:09
    Checking medium.
    Check passed successfully.
    2011-08-31 10:04:09
    Preparing backup.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'NEW'.
        Setting environment variable 'BI_BACKUP' to value 'FULL'.
        Constructed Backint for MaxDB call 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
        Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
        Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
        Writing '
    .\pipe\backup #PIPE' to the input file.
    Prepare passed successfully.
    2011-08-31 10:04:09
    Starting database action for
         the backup.
        Requesting 'SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BackupMXP'' from db-kernel.
    The database is working on the request.
    2011-08-31 10:04:09
    Waiting until database has prepared the backup.
        Asking for state of database.
        2011-08-31 10:04:09 Database is still preparing the backup.
        Waiting 1 second ...
        Done.
        Asking for state of database.
        2011-08-31 10:04:10 Database has finished preparation of the backup.
    The database has prepared the backup successfully.
    2011-08-31 10:04:10
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    2011-08-31 10:04:10
    Waiting for end of the backup operation.
        2011-08-31 10:04:10 The backup tool is running.
        2011-08-31 10:04:10 The database is working on the request.
        2011-08-31 10:04:15 The backup tool is running.
        2011-08-31 10:04:15 The database is working on the request.
        2011-08-31 10:04:25 The backup tool is running.
        2011-08-31 10:04:25 The database is working on the request.
        2011-08-31 10:04:40 The backup tool is running.
        2011-08-31 10:04:40 The database is working on the request.
        2011-08-31 10:05:00 The backup tool is running.
        2011-08-31 10:05:00 The database is working on the request.
        2011-08-31 10:05:13 The backup tool process has finished work with return code 2.
        2011-08-31 10:05:13 The database has finished work on the request.
        Receiving a reply from the database kernel.
        Got the following reply from db-kernel:
            SQL-Code              :-903
    The backup operation has ended.
    2011-08-31 10:05:13
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    Reply buffer filled.
    2011-08-31 10:05:13
    Cleaning up.
        Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
            Reading parameter file G:\sapdb\data\wrk\MXP\maxdb_config.par.
            Using staging area D:\TEMP\STAGE1 with a size of 1048576000 bytes.
            Using staging area D:\TEMP\STAGE2 with a size of 1048576000 bytes.
            Using 2 file per Backint for Oracle call.
            Using C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe as Backint for Oracle.
            Using G:\sapdb\data\wrk\MXP\initMXP.utl as parameterfile of Backint for Oracle.
            Using G:\sapdb\data\wrk\MXP\BackintHistory.txt as history file.
            Using G:\sapdb\data\wrk\backint\backint1.in as input of Backint for Oracle.
            Using G:\sapdb\data\wrk\backint\backint1.out as output of Backint for Oracle.
            Using G:\sapdb\data\wrk\backint\backint1.err as error output of Backint for Oracle.
            Using a maximal delay for a Backint for Oracle call of 3600 seconds.
            Reading input file G:\sapdb\data\wrk\backint\sapdb.in.
            Backing up pipe
    .\pipe\backup.
            Found 1 entry in the input file.
            Starting the backup.
            Starting pipe2file program(s).
            Waiting for creation of temporary files.
            1 temporary file is available for backup.
            Calling Backint for Oracle at 2011-08-31 10:05:12.
            Calling 'C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\initMXP.
            Backint for Oracle ended at 2011-08-31 10:05:13 with return code 2.
            Backint for Oracle output:
            Backint for Oracle output:                          Data Protection for SAP(R)
            Backint for Oracle output:
            Backint for Oracle output:              Interface between BR*Tools and Tivoli Storage Manager
            Backint for Oracle output:              - Version 6, Release 1, Modification 0.0  for Win x64 -
            Backint for Oracle output:                    Build: 358  compiled on Nov  4 2008
            Backint for Oracle output:         (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
            Backint for Oracle output:
            Backint for Oracle output: BKI2027I: Using TSM-API version 6.2.3.1 (compiled with 5.3.2.0).
            Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
            Backint for Oracle output: BKI0005I: Start of program at: 08/31/11 10:05:12 .
            Backint for Oracle output: BKI1216E: There are no backup management classes available.
            Backint for Oracle output: BKI1215I: Average transmission rate was 0.000 GB/h (0.000 MB/sec).
            Backint for Oracle output: BKI1227I: Average compression factor was 1.000.
            Backint for Oracle output: BKI0020I: End of program at: 08/31/11 10:05:13 .
            Backint for Oracle output: BKI0021I: Elapsed time: 01 sec .
            Backint for Oracle output: BKI0024I: Return code is: 2.
            Backint for Oracle output:
            Backint for Oracle error output:
            Finished the backup unsuccessfully.
            #ERROR
    .\pipe\backup
    End of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
        Removed Backint for MaxDB's temporary output file 'G:\sapdb\data\wrk\backint\sapdb.out'.
        Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
            Backint for Oracle was unsuccessful.
    End of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
        Removed Backint for MaxDB's temporary error output file 'G:\sapdb\data\wrk\backint\sapdb.err'.
        Removed the Backint for MaxDB input file 'G:\sapdb\data\wrk\backint\sapdb.in'.
    Have finished clean up successfully.
    SAVE/RESTORE request:
    SAVE DATA CANCEL
    SAVE/RESTORE request accepted:
    OK
    SAVE/RESTORE result:
    ERR
    -24988,ERR_SQL: SQL error
    -104,DBM command impossible at this time
    3,Data backup failed
    Servertask Info: because Error in backup task occured
    Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
    Error in backup task occured, Error code 3700 "hostfile_error"
    Backupmedium #1 (
    .\pipe\backup) I/O Error
    Backup error occured, Error code 3700 "hostfile_error"
    DBA Action ends:
    Timestamp: 20110831100513   State:    Failure
    ===================================================================================================

    Hi Markus,
    Thanks for quick response. I did checked KNLMSG file and it has XML file kind of information where as dbm.prt has some information and here it is
    =================================================================================================
    2011-08-31 10:18:30 0x00009ecc INF          1 DBMSrvCo A DBM Server client connection was established at 2011-08-31 10:18:29 (client process has process ID 24352 on computer 10.1.47.21).
    2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_extend show' is being executed.
    2011-08-31 10:18:30 0x00009ecc INF        419 DBMSrv   Command 'auto_extend' has ended with return code 0.
    2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_update_statistics show' is being executed.
    2011-08-31 10:18:31 0x00009ecc INF        419 DBMSrv   Command 'auto_update_statistics' has ended with return code 0.
    2011-08-31 10:18:41 0x00009ecc INF        283 DBMSrv   Command 'backup_save "Backup" DATA RECOVERY' is being executed.
    2011-08-31 10:18:42 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00009ecc INF          8 DBMKnl   Statement:  SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
    2011-08-31 10:19:47 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00009ecc ERR          9 DBMKnl   Statement:  SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
                        0x00009ecc ERR         10 DBMKnl   Returncode: -903
                        0x00009ecc ERR          5 DBMKnl   Errortext:  Host file I/O error
    2011-08-31 10:19:47 0x00009ecc ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'backup_save' has ended and failed with return code -24920.
                        0x00009ecc ERR     -24920 DBMSrv   ERR_BACKUPOP: backup operation was unsuccessful
                        0x00009ecc ERR     -24778 DBMSrv   The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    2011-08-31 10:19:53 0x00009ecc INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 24352 on computer 10.1.47.21).
    2011-08-31 10:19:53 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00009ecc INF          8 DBMKnl   Statement:  SAVE DATA CANCEL
    2011-08-31 10:19:53 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00009ecc ERR          9 DBMKnl   Statement:  SAVE DATA CANCEL
                        0x00009ecc ERR         10 DBMKnl   Returncode: -104
                        0x00009ecc ERR          5 DBMKnl   Errortext:  DBM command impossible at this time

  • Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)

    Hi,
    On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997').
    We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but without success. So we DIGGED INTO VSS to see what is happening.
    ***1) First we saw that an USB printer had a problem and this resulted in
    hundreds of entries in the following registry keys:
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100010]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100011]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100012]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79590]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79591]
    ***2) We completely removed ALL drivers/devices related to that printer (now the DeviceNameStore is empty and
    pnputil -e returns no driver related to the printer)
    ***3) Using process monitor we saw that during vssadmin list writers the system is searching for the DLLs related to that printer AND SEEMS CAUGHT IN AN ENDLESS LOOP: this is an excerpt of the scan:
    09:56:34,5205954    svchost.exe    324    RegSetValue    HKLM\System\CurrentControlSet\services\VSS\Diag\System Writer\IDENTIFY (Enter)    SUCCESS
    09:57:18,2310377 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
    09:57:18,2312877 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
    09:57:18,2314854 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
    09:57:18,2316416 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
    ... and so on
    .... THE SAME FILES ARE REPEATED HUNDREDS OF TIMES!!!! ...
    It seems that somewhere there is a catalog of system files which still contains the references to the (same) files used by the hundreds of devices that WERE present in the DeviceNameStore (see point ***1 above, but now it is empty),  and the System
    Writer continues to search/enumerate those files and fails.
    How can I fix it ? Is there a way to "reset" the System Writer and "rebuild" (???) the correct files that it should backup? (in order to complete a successfull system state backup)
    Can you help me?
    Thank you in advance.
    EDIT: some additional (useful?) information:
    * we also ran chkdsk /f C: 
    * sfc /scannow completes without errors
    * in the vssadmin list writers the "system writer" is missing (but - as said above - when we run it the associated process repeatedly search printer dll files in the System32 directory)
    * perhaps those file are contained is some filemaps catalog ?!? Is there a way to "reset" them?!?
    ***EDIT 2***:
    I found that the reference to those missing DLLs are in ***C:\Windows\inf\setupapi.ev3*** but if I move the file away the System Writer continues not being listed in vssadmin list writer (though the vssadmin command complete very fast).
    This is what is happening:
    svchost.exe    324    CloseFile    C:\Windows\inf    SUCCESS    
    svchost.exe    324    CloseFile    C:\Windows\System32\DriverStore\infpub.dat    SUCCESS    
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\infpub.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\infstor.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\infstrng.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\drvindex.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\INFCACHE.0    NAME NOT FOUND
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\INFCACHE.1    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\INFCACHE.2    NAME NOT FOUND
    svchost.exe    324    CreateFile    C:\Windows\inf    SUCCESS
    svchost.exe    324    QueryBasicInformationFile    C:\Windows\inf    SUCCESS
    svchost.exe    324    RegCloseKey    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup    SUCCESS    
    svchost.exe    324    CreateFile    C:\Windows\inf\setupapi.ev1    SUCCESS
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev1    SUCCESS
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev1
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev1    SUCCESS
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev1
    svchost.exe    324    CreateFile    C:\Windows\inf\setupapi.ev2    SUCCESS
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev2
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev2
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev2    SUCCESS
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev2
    svchost.exe    324    CreateFile    C:\Windows\inf\setupapi.ev3    SUCCESS
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev3
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev3
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev3
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev3    SUCCESS
    svchost.exe    324    CreateFile    C:\Windows\System32\drivers    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\drivers\acpi.sys    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\drivers\rdpbus.sys    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\drivers\i8042prt.sys    SUCCESS
    .... EVERYTHING IS OK UP TO HERE ...
    svchost.exe    324    CloseFile    C:\Windows\System32\drivers    SUCCESS
    svchost.exe    324    CreateFile    C:\Windows\System32    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cncc6500.dll    NO SUCH FILE    Filter: cncc6500.dll
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cnci6500.dll    NO SUCH FILE    Filter: cnci6500.dll
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cncc6500.dll    NO SUCH FILE    Filter: cncc6500.dll
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cnci6500.dll    NO SUCH FILE    Filter: cnci6500.dll
    ... !!!!!GET CAUGHT IN AN ENDLESS LOOP!!!!!!!! (System Writer probably ends for timeout)...
    Is there a way to rebuild/modify that file C:\Windows\inf\setupapi.ev3
    Perhaps I can delete the catroot2 directory?

    Hi,
    Please check if there are number of files in Temporary ASP.NET folders under "C:\Windows\Microsoft.Net\Framework". If so, clear these files then restart the server to check the results.
    In additional, you could try the steps below to troubleshoot the issue:
    1. Give NETWORK SERVICE Read permissions on COM+ Event System.
    a. Open the registry editor and navigate to HKLM\CurrentControlSet\Services\EventSystem.
    b. Right click on the EventSystem and then select ‘Permissions’
    c. Click on ‘ADD’ button and then type in ‘NETWORK SERVICE’ and give it READ permission.
    d. Reboot the machine and then run the 'VSS admin list writers' to check if it shows up the 'system writer'.
    2. If the step 1 doesn't work then move the contents of C:\Windows\winsxs\FileMaps to an alternate location. Then run the command 'VSS admin list writers' to check if it shows up the 'system writer'.  Is so, some of those files maybe corrupted and we
    need to identify them and replace the files from a healthy machine.
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • JDeveloper 11.1.2.0.0 Version Application wizard : File Backup Error

    hi
    As shown in the scenario (sc1) screencast at http://screencast.com/t/GA7OcgYZ
    the JDeveloper 11.1.2.0.0 Version Application wizard can fail sometimes, showing a "File Backup Error" dialog, with the message
    "Failed attempting to back up imported resource
    D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\Model.
    Check that there are no file system explorers viewing files in this location and that none of the files are open in other applications before resuming."
    This even occurs when there are no other processes (like Windows Explorer or an editor) using/locking the file.
    It should be possible to reproduce the behaviour using the example application
    at http://www.consideringred.com/files/oracle/2011/VersionAppLockedIssueApp-v0.01.zip
    which is really nothing special I think, so it might also reproduce using another application.
    First open the application and also open the file "browseEmployees.jsf" in design view.
    After that, as it seems, the Version Application wizard fails.
    Note that it might be relevant that I am using Windows 7, as I can imagine that this could behave differently when using JDeveloper on other operating systems.
    Also note, if I try to ZIP the application folder (instead of using the Version Application wizard) after opening the file "browseEmployees.jsf" in design view, I get a message like "WARNING: The process cannot access the file because it is being used by another process.
    : D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\.data\00000000\je.lck ",
    as can be seen in the scenario (sc2) screencast at http://screencast.com/t/rFiL47Bil
    As it seems that the Version Application wizard has managed to commit the source files, one workaround could be to checkout the source in another location and continue working there.
    Other suggestions to avoid this issue, or deal with it, are welcome.
    questions:
    - (q1) Can this "File Backup Error" behaviour for the Version Application wizard be reproduced?
    - (q2) How can this "File Backup Error" behaviour for the Version Application wizard be explained?
    many thanks
    Jan Vervecken

    fyi
    Today I noticed that there is a My Oracle Support note about this:
    - note id 1353389.1 , "In JDeveloper11.1.2.0.0 the Version Application Wizard Failed with the Error: File Backup Error "
    Its "Solution" section currently says:
    "The problem is still investigated by development.
    But there is a possible workaround for Bug 12912410 by unchecking the checkbox 'Perform Checkout' in step 5 of 6 in the wizard screen. "
    regards
    Jan

  • Time machine backup error in Mavericks

    I"m getting backup errors in Mavericks when it tries to back up to the Backups.backupdb folder in my 3TB external backup drive.  This happens even when I turn Time Machine off! 
    This is the error I'm getting (taken from the console) when I manually start a time machine backup:
    10/26/13 9:56:39.268 AM com.apple.backupd[18160]: Starting manual backup
    10/26/13 9:56:40.826 AM com.apple.backupd[18160]: Backing up to /dev/disk2s2: /Volumes/Macbook Pro Backup 3TB/Backups.backupdb
    10/26/13 9:56:46.069 AM com.apple.backupd[18160]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Macbook Pro Backup 3TB/Backups.backupdb/Macbook Pro 25 size:37
    10/26/13 9:56:46.070 AM com.apple.backupd[18160]: Backup failed with error 2: 2
    Has anyone seen this?  At this point, I haven't been able to back up anything after upgrading to Mavericks, and I really don't want to delete the backup folder and start over.
    I thought it might be a permissions problem, so I tried to use the disk utility to verify this.  I wasn't able to select verify or repair disk permissions.  When I tried to verify the disk, I got a 'Live file system repair is not supported' error.  I've never seen this before.
    Any thoughts on all of this?

    I fixed this by hard booting, then repairing the disk.  A restart didn't work. 

  • I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

    I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

    Nevermind I fixed it. Thank you.

  • Is it possible to export a backup from DPM?

    Hello,
    I need to export a backup from DPM to use it in a test enviroment. I have a SQL database backup and I need to give that version of the database to the DBA. He will use that version of the database in the test envioroment.
    So, I need to know how could I export the backup to use the database in a different SQL enviroment.
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

    Hi,
    Simply start a recovery for the SQL database and select the option to recover to a network folder.  You can browse to any server that has a DPM agent installed for this DPM Server.
    If the SQL server in the test environment has a DPM agent installed, you can restore directly to that test server by selecting the option to "Recover to any instance of SQL Server".
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.
    Hello Mike Jacquet,
    Thanks for your fast reply.
    When I start a recovery the option "Copy to a network folder" is not available. I had to look for other method and I found a powershell script.
    Import-Module dataprotectionmanager
    $global:pg = Get-ProtectionGroup -DPMServerName DPMserver | ? {$_.friendlyname -eq "protection_group"}
    $global:ds = Get-Datasource $pg | where {($_.productionservername -eq "SQL Server name ") -and ($_.name -eq "data_base")}
    $global:rpl = Get-RecoveryPoint $ds | sort -Property RepresentedPointInTIme -Descending
    $global:rpl = $global:rpl[0]
    $rop = New-RecoveryOption -SQL -TargetServer "DPMserver" -RecoveryLocation CopyToFolder -RecoveryType Restore -TargetLocation "C:\Folder"
    Recover-RecoverableItem -RecoverableItem $rpl -RecoveryOption $rop
    This script copy the last version of the database backup to "C:\Folder"... there is just one problem: it takes too much time!
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

  • FIM multivalue attribute export to SQL - error 0x80230808

    Hi,
    Running FIM Synchronization Service v 4.0.3531.2 - Update1.
    This instance is a simple setup, import from AD, export to SQL. I'm trying to export two multivalue attributes, one is a normal multivalue string, second is a reference attribute (member). My anchor is the GUID from AD in string format, perfectly fitting
    into uniqueidentifier sql datatype.
    Since I wanted to have the member values in the multivalue table also stored in a uniqueidentifier column (for further linking) I had to create two columns, one as "uniqueidentifier" and second as "text". FIM configuration went smoothly,
    I defined a member multivalue reference attribute and selected the uniqueidentifier column as "String attribute column", and the other multivalue string attribute had to be linked as "Large string attribute column" and I pointed it to the
    text datatype column.
    Synchronization completed without errors, export step properly exported all multivalue string attributes to the text column, BUT when it came to exporting the GUID reference attribute to the uniqueidentifier column it exported only the first value showing
    a "dn-attribute-failure" error. From the FIM GUI it was only showing the error number = 0x80230808.
    I did a SQL trace to see what's going on. I re-run the export and saw FIM trying to delete all the values for this attribute multiple times with:
    DELETE from [tblAD_Multivalue]  WHERE [objectGUID] = N'{B011B424-5B2F-43A9-84C5-8605A570487B}' AND [attributeName] = N'member'
    followed by doing cursor magic with the first value that was already added:
    exec sp_cursor 180150007,4,0,N'tblAD_Multivalue',@objectGUID='B011B424-5B2F-43A9-84C5-8605A570487B',@attributeName='member',@guidValue='2E52A484-C7F6-49C0-AAC8-0A30C732A385'
    After repeating the above for over 10 times it added a export_error_detail:
    update [mms_connectorspace] set [export_error_detail] = N'<export-status>
    <cd-error>
    <error-code>0x80230808</error-code><error-literal>[Modify] Failed operation</error-literal>
    </cd-error>
    </export-status>
    ',[count_export_error_retries] = 0,[is_export_error] = 1,[initial_export_error_date] = '2011-02-12 21:36:08.995',[last_export_error_date] = '2011-02-12 21:36:08.995',[export_error_code] = -2145189885,[unapplied_export_batch_number] = 1,[unapplied_export_sequencer_number] = 2162572,[original_export_batch_number] = 1,[original_export_sequencer_number] = 2162572,[current_export_batch_number] = 4,[current_export_sequence_number] = 2216213 where ([object_id] = '6F5C98E3-38FF-4F32-95F6-B5A315B71D7A')
    I tried manually adding one of the following values directly to SQL and it worked, so I'm not really sure what's wrong here.
    Any ideas?
    Piotr

    Hi Markus,
    yes, I know all about the architecture to allow multi-value attributes to be exported to SQL.
    Everything works when I have just one string value column in my tblAD_Multivalue. The problem is that my anchor in the primary table is a GUID in a uniqueidentifier SQL column type (in FIM MV it's a string), so when I'm exporting multivalue reference attributes
    to SQL I would like the GUID values also to go to a uniqueidentifier type column. That's why I set up the secondary column in the multi-value table with text datatype, so FIM recognizes it as a "large string column". I think I did everything within
    the guidelines, so I was puzzled when I saw that error.
    Consider this simple example, you're exporting users and groups from AD, you're anchor data type is uniqueidentifier, and you need to export the member attribute and the proxyAddresses attribute. What would you do to allow future SQL joins to calculate membership?
    hope this explains a bit more this scenario, would appreciate any suggestions.
    Piotr

Maybe you are looking for

  • How to make stills duration less than 00:00:00:01 ?

    Hi, This may seem an odd request, but I have a sequence of several stills of a propeller blade on a model, sort of time lapse, move and photo etc, which when played together rotates the prop. They are currently set to 00:00:00:01 and play loop sees a

  • Cannot start Managed Server- after creating a new domain

    I created a new domain, I could start Admin Server but ,I am unable to start Managed Server. My DB is up & running at com.collaxa.cube.engine.CubeEngine.finalizeActivity(CubeEngine.java:2842) at com.collaxa.cube.engine.CubeEngine.checkBlockConditions

  • How can you find out the balance on my I tunes gift card?

    I bought two $ 100 gift cards and both found to be redeemed although the cards were in my safe and the code was intact covered with plastic. Finally Apple put the money back into the defective cards. My question is how to find out whether the cards a

  • Does Gnome-Terminal remeber often used commands somehow?

    This isn't an error! I've been starting my wireless connection manually since I installed Arch, as I haven't been able to get it to autostart at boot. So I've been starting by running sudo wpa_supplicant blahblahblah then sudo dhcpcd wlan0. Anyway, I

  • Quick Java version question...

    I'm unable to use VNC while connected through a semi-restricted VPN tunnel into work (I have to visit a certain website at work and when I click a button an Aventail application springs into life and I get a VPN tunnel). My work doesn't support Macs,