Export help needed

Hi
I want to export a short film Ive made so it can be viewed on a pc and Quicktime doesn't seem to work. I have only very basic understanding of File formats so I may not have saved the files correctly.
I have FCP studio and the film was shot in HDV, 16:9. Plays great on FCP. I exported as a quicktime file as HDV and as SD. The files Ive made play on the mac but not a pc and don't play widescreen on either i.e. picture appears squashed.
Ultimatly id like to be able burn dvd's from the file.
Any help greatly apreciated.
Thanks
Thomas

If you want to burn a DVD, then choose: file/export/Using Compressor. Select a preset for DVD's there (using a 16:9 setting). Then burn the resulting files with DVD SP to a disk. No need to go through another conversion. In DVD SP, select the track of video in the outline after you've added it to a button, and enable all the User operations in the tab that's seen in the User operations tab. The resulting DVD will play on a PC, a Mac or a DVD player.
Select 16:9 letterbox in the General Tab of that same stream. It will then fill a 16:9 screen or letterbox on a 4:3 set.
Jerry

Similar Messages

Urgent export help needed

Extremely urgent help needed! I'm on a tight deadline. I'm working on a sequence, with all my settings set to DV. My client needs an AVI file as an output. After exporting using conversion, the file looks and plays fine, except for any transitions. At the start of each transition, there is 1 frame that is unrendered. I have rendered the entire sequence, and tried the export many times now, and I can't figure out what's wrong. I'm working on v5.1.4. Can someone please help?????

Thank you, kind sir! < </div>
Careful who you're callin' names around here, buddy!
Thank you for the kind words, that's why we're here. Hrdly anyone ever closes their threads on a positive note, I thank you for that, too.
Good luck with your future projects and those squeaky deadlines.
bogiesan

Exporting help needed!!!

Hi. I am trying to export a video from FCP 5.1.3. It's roughly 4 minutes (720x480, 29.97fps), and I need an uncompressed quicktime. I have tried several times to export, but it usually quits about 75% of the way through. Can someone please advise me as to the best settings for this. Thanks.
Charles
MacBook Pro 15", 2.0 Mac OS X (10.4.7)

I have tried many ways. I am exporting to a Lacie 160GB external drive via USB2, and there are about 30GB available. So, here's what I've attempted thus far:
- Export as a QT Movie: Settings - uncompressed 8bit NTSC, including Vid & Audio, make self contained. I have also tried setting the compressor to None. After about 25 minutes (about 75%), FCP just terminated.
- Export Using Compressor:
Settings - default Quicktime
Inspector - Settings - Compressor = None
Depth = Best, Millions of Colors +
This resulted in a "Failed QT error 27"
- Export Using QT Conversion
Settings - Compressor = None
Depth = Best, Millions of Colors +
I have also tried using Uncompressed 8 bit, and 10 bit, but with all three I get "File Error: Unknown File".
During one of my many attempts in the wee hours of the morning (I can't remember which one exactly) the export got to about 75% again, when it terminated and the dialogue box said that the file was too big. Would this mean that the file is too big for my destination drive, or does FCP have a file export size limit? Any help would be greatly appreciated. This is something I have to have done today, and my client requested uncompressed. The source files are all animations that I have imported into FCP, and they need to be absolute best quality going back to him. Thanks.
Charles
MacBook Pro 15", 2.0 Mac OS X (10.4.7)

FCP exporting help needed

Hi. I have also posted this question in the Final Cut forum, but thought I would try here as well. I am trying to export a video from FCP 5.1.3. It's roughly 4 mins in length, 720x480, and my client needs it as an uncompressed QT. The source footage is all animations that he supplied me with on a drive. After many long hours and many attempts, I am unable to export an uncompressed QT, so I think I'm doing something wrong. Here is a summary of my orignal posts on the FCP forum:
Hi. I am trying to export a video from FCP 5.1.3. It's roughly 4 minutes (720x480, 29.97fps), and I need an uncompressed quicktime. I have tried several times to export, but it usually quits about 75% of the way through.
I have tried many ways. I am exporting to a Lacie 160GB external drive via USB2, and there are about 30GB available. So, here's what I've attempted thus far:
- Export as a QT Movie: Settings - uncompressed 8bit NTSC, including Vid & Audio, make self contained. I have also tried setting the compressor to None. After about 25 minutes (about 75%), FCP just terminated.
- Export Using Compressor:
Settings - default Quicktime
Inspector - Settings - Compressor = None
Depth = Best, Millions of Colors +
This resulted in a "Failed QT error 27"
- Export Using QT Conversion
Settings - Compressor = None
Depth = Best, Millions of Colors +
I have also tried using Uncompressed 8 bit, and 10 bit, but with all three I get "File Error: Unknown File".
During one of my many attempts in the wee hours of the morning (I can't remember which one exactly) the export got to about 75% again, when it terminated and the dialogue box said that the file was too big. Would this mean that the file is too big for my destination drive, or does FCP have a file export size limit? Any help would be greatly appreciated. This is something I have to have done today, and my client requested uncompressed. The source files are all animations that I have imported into FCP, and they need to be absolute best quality going back to him.
Any help would be greatly appreciated. Thanks.
Charles

It sounds to me like you're trying to make the file too big. You do not need to export a 10bit Uncompressed file for 720x480 MinDV footage. Check with your client and ask how big he needs the video. If your native 720x480 is fine, then just export QuickTime Movie using Current Settings and check the Make This Movie Self Contained box.
That will be an uncompressed QT version of your film in the DV format.
Hope that helps. It should only take it a couple of minutes.
~Luke

FCP to DVD Studio Pro exporting help needed - desperatey......

Hi.
Please help me if you can.
I am exporting a Quicktime movie from FCP for DVD Studio Pro 4. I chose the MPEG 4 option in the compression, make it best quality and bounce it. But when I look at the self-contained mov file, every time a person walks across the screen I am getting little lines on the light parts of the screen or a beating or sizzling effect in the dark parts. Basically it looks like everything is "alive" somewhat - objects like curtains seem to sizzle.
Can someone guide me in the proper choices to make when exporting from FCP to import into DVD Studio Pro? There is not an MPEG-2 or M2V option, and the MPEG compression breaks it down to MPEG-2 or M2v upon import into DVD Studio Pro anyway.
I guess I don't know how to get the best quality bounce from FCP, in order to have a file that is less that 4G in size. Can someone please advise?
There are no directions on exporting FOR DVD Studio Pro in the Final Cut books, nor was there a FCP prep covered in the DVD SP books.

Quick workflow from FCP -> DVDSP:
In FCP, File Export QuickTime Movie
Select DVD Studio Pro Markers in the Markers drop-down (leave other settings as is)
Save QT Movie to your preferred location
In DVDSP, import your newly-created QT Movie
(You may want to confirm your encoding settings - both in terms of bit rate and whether
you're encoding on build or have background coding enabled - prior to this step though)
Best Quality workflow:
In FCP, trash the render files for your sequence
From the Menu, File Export Using Compressor
Now, in Compressor, select the appropriate preset(s): DVD: Best Quality 90 Minutes - 4:3
Optional: Delete the AIFF setting completely
Select the appropriate destination(s)
Optional: For the Dolby preset, alter Dialog Normalization (under the Audio tab of the Inspector) to -31. In the Preprocessing tab, alter the Compression Preset to None
Click Submit
Once the encode is done, import the .m2v and .ac3 (and/or .aiff) files into DVDSP
It's only fair to tell you that since this produces (pretty much) the best possible quality from Compressor, it may take as much as 5x-10x as long as the 'quick workflow' detailed earlier. (Especially if you've set DVDSP to do a one-pass encode)

Sales Order - Export help needed

Hi Gurus
I am checking Export Sales Order Settings and also testing export sales order.
While creating sales order I am getting one error "Material SDHD00000A4A0501 is not defined for sales org.1200, distr.chan.00, language EN"
Kindly give me the details steps to check the settings for export.
Rajesh

Hi
You have to extend the material to the 1200 - 00 (S.O and DC) and the language EN can be maintained in the Additional Data (tab on the application tool bar) in the material master.
Thanks,
Ravi

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Need help need help exporting epub to iTunes Producer

Need help need help exporting epub to iTunes Producer. Nothing will load only get that little spinning wheel.

It's not necessary to post a second time. I'm locking this version so others may reply at the first thread you created:
Hi I created a EPUB with indesign cc and I'm trying to submitted it to iTunes Producer

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed : Extension manager cs6 not listing products

Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
        <Data key="$dreamweaver">$installfolder</Data>
        <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
        <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
        <Data key="NeedOperationNotification">true</Data>
        <Data key="QuitScript">dw.quitApplication()</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">DRWV</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
     <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
     <Data key="$lights">$presetsfolder/Lights</Data>
     <Data key="$materials">$presetsfolder/Materials</Data>
     <Data key="$meshes">$presetsfolder/Meshes</Data>
     <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
     <Data key="$volumes">$presetsfolder/Volumes</Data>
     <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
     <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
        <Data key="DisplayName">Photoshop CS6 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">13.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>
</Configuration>
                                                                    Please someone help me i cant install any photoshop extension because of this issue,,,

Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)

Help needed Displaying ALV Secondary list without using oops concept

Hi Experts
Help needed Displaying ALV Secondary list without using oops concept.
its urgent
regds
rajasekhar

hi chk this code
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
     I_CALLBACK_PF_STATUS_SET       = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
     IS_VARIANT                     = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z50651_PFSTATUS' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
REPORT Z_ALV_INTERACTIVE MESSAGE-ID ZMSG_50651
                                LINE-SIZE 100
                                LINE-COUNT 60
                                NO STANDARD PAGE HEADING.
******************TABLES DECLARATION*****************
TABLES : VBAP,MARA.
*****************TYPE POOLS**************************
TYPE-POOLS : SLIS.
****************INTERNAL TABLES**********************
DATA : BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN, "SALES DOCUMENT
POSNR LIKE VBAP-POSNR, "SALES DOCUMENT ITEM
MATNR LIKE VBAP-MATNR, "MATERIAL NUMBER
END OF IT_VBAP.
****************TEMPORARY VARIABLES******************
DATA : V_VBELN LIKE VBAP-VBELN."SALES DOCUMENT
DATA : V_MTART LIKE MARA-MTART. "MATERIAL TYPE
*****************FIELD CATALOG***********************
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
       WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
****************LAYOUT*******************************
DATA : WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
***************VARIANT*******************************
DATA : G_VARIANT LIKE DISVARIANT.
****************SAVE*********************************
DATA : G_SAVE(1) TYPE C.
*****************EVENTS******************************
DATA : XS_EVENTS TYPE SLIS_ALV_EVENT,
       G_EVENTS TYPE SLIS_T_EVENT.
******************PF STATUS**************************
DATA : PF_STATUS TYPE SLIS_FORMNAME VALUE 'SET_PF_STATUS'.
******************USER COMMAND************************
DATA : USER_COMMAND TYPE SLIS_FORMNAME VALUE 'SET_USER_COMMAND',
       R_UCOMM LIKE SY-UCOMM.
****************SELECTION SCREEN************************
SELECT-OPTIONS : S_VBELN FOR VBAP-VBELN.
***************AT SELECTION SCREEN*********************
AT SELECTION-SCREEN.
PERFORM VALIDATE.
**************START-OF-SELECTION**************************
START-OF-SELECTION.
PERFORM GET_DETAILS.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM VARIANT.
PERFORM SAVE.
PERFORM EVENTS.
PERFORM ALV_DISPLAY.
*********************FORMS*******************************************
*&      Form validate
      text
--> p1        text
<-- p2        text
FORM VALIDATE .
SELECT SINGLE VBELN
                FROM VBAP
                INTO V_VBELN
                WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'enter valid vbeln'.
ENDIF.
ENDFORM.                    " validate
*&      Form get_details
      text
--> p1        text
<-- p2        text
FORM GET_DETAILS .
SELECT VBELN
         POSNR
         MATNR
         FROM VBAP
         INTO TABLE IT_VBAP
         WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
    MESSAGE E000 WITH 'no details found'.
ENDIF.
ENDFORM.                    " get_details
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'POSNR'.
WA_FIELDCAT-OUTPUTLEN = 6.
WA_FIELDCAT-SELTEXT_L = 'ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_VBAP'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-OUTPUTLEN = 18.
WA_FIELDCAT-SELTEXT_L = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    " fieldcat
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
WA_LAYOUT-ZEBRA = 'X'.
ENDFORM.                    " LAYOUT
*&      Form VARIANT
      text
--> p1        text
<-- p2        text
FORM VARIANT .
CLEAR G_VARIANT.
G_VARIANT-REPORT = SY-REPID.
ENDFORM.                    " VARIANT
*&      Form SAVE
      text
--> p1        text
<-- p2        text
FORM SAVE .
CLEAR G_SAVE.
G_SAVE = 'A'.
ENDFORM.                    " SAVE
*&      Form EVENTS
      text
--> p1        text
<-- p2        text
FORM EVENTS .
CLEAR XS_EVENTS.
XS_EVENTS-NAME = SLIS_EV_TOP_OF_PAGE.
XS_EVENTS-FORM = 'TOP_OF_PAGE'.
APPEND XS_EVENTS TO G_EVENTS.
ENDFORM.                    " EVENTS
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
WRITE :/ ' INTELLI GROUP'.
ENDFORM.                    "TOP_OF_PAGE
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
   I_CALLBACK_PF_STATUS_SET         = PF_STATUS
     I_CALLBACK_USER_COMMAND        = USER_COMMAND
I_STRUCTURE_NAME               =
     IS_LAYOUT                      = WA_LAYOUT
     IT_FIELDCAT                    = IT_FIELDCAT
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
     I_SAVE                         = G_SAVE
    IS_VARIANT                      = G_VARIANT
     IT_EVENTS                      = G_EVENTS
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = IT_VBAP
   EXCEPTIONS
     PROGRAM_ERROR                  = 1
     OTHERS                         = 2
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " ALV_DISPLAY
*&      Form SET_PF_STATUS
      text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "SET_PF_STATUS
*&      Form SET_USER_COMMAND
      text
FORM SET_USER_COMMAND USING R_UCOMM
                            RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN 'DC'.
      READ TABLE IT_VBAP INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SELECT SINGLE MTART
                      FROM MARA
                      INTO V_MTART
                      WHERE MATNR = IT_VBAP-MATNR.
        IF SY-SUBRC <> 0.
   MESSAGE E000 WITH 'NO MATERIAL DESCRIPTION FOR SELECTED MATERIAL NO'.
        ELSE.
          WRITE :/ 'MATERIAL NO :',IT_VBAP-MATNR.
          WRITE :/ 'MATERIAL TYPE :' , V_MTART.
SUBMIT SLIS_DUMMY WITH P_MATNR EQ IT_VBAP-MATNR
                    WITH P_MTART EQ V_MTART.
        ENDIF.
      ENDIF.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
    WHEN 'EXIT'.
      LEAVE TO SCREEN 0.
    WHEN 'CLOSE'.
      CALL TRANSACTION 'SE38'.
ENDCASE.
plz reward if useful

Help needed using adobe exportpdf

The first time I used adobe export pdf it worked well. However the next time and every other time I try to convert a pdf doc to word docx I get the error message at the end of the uploading session. "pdf doc failed to export to m,icrosoft word. There was an unexpected problem.
Anyone overcome this problem?

Hi Stacy
               Thanks for that info. I was aware of the 100MB limit but
your response made me think again and go back to the problem and this is
what I found. The first pdf document I uploaded into Adobe export pdf was 43
MB and it went through fine. when I looked at the conversion to Word docx I
found it had been transformed into 83MB.
So the conversion (which was a children's book with lots of images in it)
resulted in an increase of MBs by a factor of 1.7.
The second pdf document I uploaded was 64MB and this failed. If I apply the
1.7 factor then the Word docx I wanted was going to be 109MB and therefore
over the 100MB limit.
I didn't know that converting pdf to word would increase the MB like that.
Why, I don't know so thanks for your help I've learnt something new.
Cheers
            Garth
In a message dated 07/10/2013 04:42:36 GMT Daylight Time,
[email protected] writes:
Re: Help needed using adobe exportpdf
created by StacySison (http://forums.adobe.com/people/StacySison) in
Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/5740689#5740689)

Data uload to ODS ending up with an error. URGENT HELP NEEDED!!!!!!

Hi
My Sceniro is Full load from ODS1 to 5 other ODS. Iam uploading the data to other 5 ODS by selecting 1 ODS at a time.
Problem i am facing is upload is ending up with error mesg. Error Mesg are
<b>Error 8 when starting the extraction program - R3019
Error in Source System - RSM340
Req xxx in ODS2 must have QM ststus green before it is activated - RSM1110</b>
I have seen the the OSS notes for given error no, but they are not applicable to me. what could be the other possible solution.
In detail tab of the monitor i see red light at Extraction step and Subseq. processing.
Its quite urgent bcoz this error is occuring in Production system.
Plzzzz urgent help needed.
Thanks
Rohini
Message was edited by: Rohini Garg

rohini,
go to RSA1->Modeling->Source Systems and right-click on your BW system, and click on 'Replicate Datasources'.
also, go to the ODS that's causing the problem (via RSA1->InfoProvider and go to your ODS), right click and click on 'Generate Export Datasource'.
one more thing, make sure that all your record/s in the source ODS is active. if you're not sure manage its contents and click on 'Activate'. if there are any entries in the the next screen that comes up, you need to activate it first, then try everything again.
let me know what happens. also try to look for error messages in ST22 and SM21 that may be related to this and post whatever possible error you see there here.
ryan.

Messaging:System Error(-10)HELP NEEDED!NEED BEFORE...

Messaging: System Error(-10) [Nokia N70] URGENT HELP NEEDED! - NEEDE BEFORE WED 21ST MAY '08 - BUT HELP OTHERWISE APPRECIATED!______________________________
Hey,
I need this help before Wednesday 21st May 2008 as I am going abroad and urgently need my phone. I have had my phone for just over a year now and I have never had any problems with it up until now.... Think you can help...?
This is the scenario. My messages are saved under my nokia N70's MMC memory card and when I get a message there are a number of problems.
1) My phone does not vibrate or alert me when a message comes in. I have checked my profile settings and they are all up to volume.
2) When the messages come through they are not displayed on the main window of the phone as "1 New Message Received" but in the top corner with a little envelope icon. I know the icon normally comes up but the "1 New messge received part doesn't come up.
3)When "1 New Message Reveived" is not displayed on the main window I go into the "INBOX". When I click inbox on "Messaging" the phone displays an error saying: Messaging: System Error(-10) with a red exclamaion mark. The I can not write any messages, view sent, or drafts.
I have tried to change me message settings by going on "Messaging"> Left Click "Settings" > "Other" > "Memory in use" and selected "Phone Memory". This works but then my I looses all my previous messages.
4)My phone is also dead slow. I click menu and it takes at least five minutes to load menu.
IF YOU COULD HELP ME ON ANY OF THESE ISSUES I WOULD BE MAJORLY GREATFUL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Soo Much,
Robert__________

U said in another post u've tried all my solutions = =?
On that post its for Nokia N95 u kno? Although the problem is similar, but different phone model can lead to quite different solutions.
Are u sure u tried all my solutions?
have u tried this?:
/discussions/board/message?board.id=messaging&message.id=7926#M7926
Also format ur memory card, do not use content copier! dont install too much softwares, as ur phone model is old and doesnt have much space.
This is from NOkia, sometimes does work depending on ur situation:
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).
use device status http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Nokia-Device-Status-57673.shtml
to maybe let me see what u got on ur phone (by saving/exporting report).
Make sure u have the latest firmware! Updating firmware is like a hard reset but also upgrade.
Message Edited by goldnebula on 20-May-2008 02:05 PM

Export help needed

Similar Messages

Maybe you are looking for