Export high resolution intensity Graph

Hi,
I want to export the intensity graph to a high resolution image. Now i've got an image with a resolution of 72 dpi.
Is it possible to set the export resolution?
Regards, 
Bjorn
Attachments:
export graph image.vi ‏406 KB

Seems the image indicator/clipboard method from the previous post has some limitations for larger sizes.
In this case, it works fine if you save to a file, e.g. as follows. (see attached 8x image). (No image container needed).
Message Edited by altenbach on 07-06-2009 04:54 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
export_graph_imageMOD2.vi ‏399 KB
8xsize.png ‏209 KB
8xDiagram.png ‏10 KB

Similar Messages

  • Exporting Final Cut Movie Frame as High Resolution Photo

    Hello everyone,
    Is there a way to take a frame in a final cut movie and export it as a high resolution photo? My supervisor has taken some great video footage and would like to use parts of it to make a calendar. I've tried exporting in quicktime, but the highest resolution I get is 72 dpi.
    Even if there's a 3rd party program that will do this if Final Cut won't, please let me know. Thank you!

    There are any number of up-rez tools for Photoshop that do a pretty good job of creating pixels where none exist. Simply resampling at a larger size/pixel count often creates acceptable results. But, as stated, there are only a limited number of pixels available: whatever you shot with. If you shot with a fabulous high def (not HDV) camera, you might have as many as 1080x760 some odd pixels.
    bogiesan

  • How to export high quality images from graphs

    Hello,
    I am absolutely no expert in this subject, so it may be that I say some aberrations
    So this is what I want to do:
    I perform signal processing of vibration data with LabVIEW. What I get as results are a lot of graphs such as spectrums, waveforms, intensity graphs, 3d surface graphs, etc. being the most important the 3 firsts.
    Then, of course, I need to write some reports or powerpoint presentations, and I need to show the plots as figures. The data that I have is very large, (a waveform is sampled at 1,25 MS/s and I am ploting 10 seconds) so I can only export the simplified version of the image to the by right clicking the graph and then I paste it in Paint and save it in bmp format.
    Sometimes I need to add some text on the images, so I do that also in Paint. Finally I import the bmp image to the word/powerpoint document and save it.
    When I make a report, I use one of the available tools to convert the word .doc document into a pdf document (this tools that are like a printer), so I get as a result a PDF with the text and the images.
    As you can imagine, the final result is not so good, particulary on the images. They are not so clear. I have seen some pdf documents which have images so clear that you can zoom it all you want and nothing happens. I believe these images are stored on a vectorial format.
    Well now I want to improve the quality of my reports so first of all I want to use some Latex software to write the text. And of course, I would like to have my graphs - generated by LabVIEW - in this vectorial format. Does anyone know how can I do this?
    I have read something about a dll which creates some .wmf image file but I don´t know very much about it.
    thank you in advance,
    crimovlc
    PS: attached are some of my current images
    Message Edited by crimolvic on 01-08-2008 07:59 AM
    Attachments:
    Images.zip ‏157 KB

    This is not want you wanted but may be useful.
    In this thread boltzmann teaches us how to imbed the CW-3D graph in a PP presentation. You can manipulate the 3d graph IN PP !
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Export file settings to print at ultra-high-resolution: 5000 dpi, 1x1cm

    I have a series of files each with a 1024x1024 artboard, with different patterns on each one.
    I need to export them to be printed at ultra-high-resolution (5000 dpi, with a physical size of about 1cm x 1cm) to be used with a particular kind of new micro-optic technology.
    How do I export the vector images to be rendered properly for printing at a specific dpi, and a specific size?

    I understand the math better now, but am still stuck on how to set the size using File>Export.
    When exporting as a JPEG file, for example, I have the following options:
    If I enter 5000 ppi in the Resolution field (or even 2400), I get an error that Illustrator can't export at that high a resolution. I tried opening the Illustrator files directly in Photoshop, but the images are distorted and unusable as they appear there.
    I don't see any options to set the image size to 2000x2000 pixels upon export. Sorry if I am being obtuse--I feel I must be missing something very basic here!

  • I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy.  How can i fix this?

    I have Adobe Elements 9 and I used to be able to export HD 1080p videos with no issue. But recently, when I export using H.264 MPEG or MPEG 2, which I normally used, the high resolution videos come out very choppy.  How can i fix this?

    mr
    Are you running the 9.0.1 Update of the program and on what computer operating system is it running?
    Is your video card/graphics card driver up to date according to the manufacturer of the card?
    Is your computer optimized, including maintenance of pile ups of preview files, conformed audio files, and conformed video files?
    Do you have the latest version of QuickTime installed on your computer with Premiere Elements 9.0/9.0.1?
    What are your project settings and what are the properties of your source media? When you say that "used to be able to export...." is that on the same computer, same brand/model/settings for the camera recording the video now in use, same Premiere Elements 9.0/9.0.1?
    Where player are you using for the playback of these exports?
    Please give us more details on the size of the projects (then and now) as well as details of the customized export settings in your Share/Computer/ route. Premiere Elements 9.0/9.0.1 is only a 32 bit application running in 32 bit or 64 bit system. Not sure if computer resources might be taxed more so now than before.
    More later.
    ATR

  • High Resolution Export

    I want to export a slideshow with music as a higher resolution than 640x480 movie for inclusion in a DVD project (not to iDVD). I was able to do that in 5..any ideas how to get around the new limit...or am I just not remembering correctly?

    There really isn't anything you can do to force an image to be "high resolution". If you give them full-sized JPEG copies that is as high as you can provide. It doesn't do any good to change the PPI (or DPI if you prefer) because it has no effect on the resolution of the image. That setting really has no impact on digital images. So my suggestion would be to export full-sized JPEG images and burn those to the CD.

  • Can't export .eps High Resolution

    Hi, I was designing a Business Card using Illustrator and after finish when I was trying to save the project like an .eps with High Resolution the program didn't work and gave me an error "Stopped working" , I tried again and the same happened.. Can someone help me to fix it? Thanks!

    Save a copy of your file, to do some testing. First uncheck all the options, then start deleting, until you can save.
    Once you are able to save a .eps, you can figure out if you have a corrupt font or image. Also try changing the printer you have selected, believe it or not this affects save to .pdf & .eps. Basically a corrupt .ppd causes the problem so switching or updating you .ppd can fix that.
    If none of this help then try restarting your computer.

  • What is the best way to save and copy high resolution slide show?

    Creating and saving/burning slide shows in iMovie or iDVD does not appear to give the same high resolution as playing slide shows directly from iPhoto.  Resolution is also lost when exporting the slide show to iTunes.  Is there a recommended technique to preserve resolution when saving a slide show?

    Click the "Export" icon on the bottom of the application window.
    Click the "Custom Export..." button on the bottom left hand side of the new menu that appears at the top of the application window.
    At the bottom of the next window click the "Options..." button.
    Under the "Video" setting, click the "Size..." button.
    Next to "Dimensions:" click the "Compressor native" drop down menu.
    In there you have "1920 x 1080 HD".
    There are a bunch of other options, so explore and find what works best for you.

  • How to fix lost connections to original high-resolution pictures in iPhoto and how to import an iPhoto Book from one iPhoto library to another

    Hi there,
    I am using a MBP Pro with 8 GB cache and 1 TB HDD from beginning of 2011 with OS X Yosemite and iPhoto version 9.6 (910.29).
    I created an iPhoto Book to print which contains my best pictures of 2013 and 2014. Then I got an error message when I wanted to print the book, saying (translated from German):
    Book could not be created.
    With photo p233432343.jpg there was an error. The original version of that photo with full resolution could not be found or is damaged. Please replace the photo or delete it from your book.
    When I enquired further, I found out, that many, many pictures in my iPhoto library have that problem - only the thumbnail picture is found by iPhoto, but not the one with the high resolution. When looking at the photos in detail one sees that they are not sharp because obviously the photo book only refers to the thumbnail. When I went into the iPhoto Library using Finder, I saw that the original high res photos are still there. As there are an estimated 3000 photos with a lost connection (some still have, it but about 1/2 of my photos don´t), it does not make sense to import those photos manually. This photo book is just the tip of the iceberg, so to say.
    Then I looked for solutions in some forums. I had two lPhoto libraries, one on my HDD (120GB) and one on an external HDD (175GB). Assuming there might be problems, I have deleted (moved) the one on my HDD, because the "right one" is the one on my external HDD and started iPHoto again using the alt key. But that did not work either.
    I then tried to repair my iPhoto library using iPhoto Library Manager, and merged and rebuilt libraries. The library that came out was crap - all folders that had lost connections to the high resolution pictures now have zero photos in it. Also it is lacking the projects, including the photo book I created.
    Then I went to find out if there is a way to import the iphoto book project from the old, corrupt library into the new, repaired library but could not find anything. It can only be exported as a file structure or website. As the file structure is missing the high res pictures, that does not even solve the "little" problem of the photobook.
    I would REALLY appreciate your help on the two questions:
    1- Can you advise what I need to to do to to get the connection to the high resolution photos established again  ? As it is more than 3000 photos, I use an automated way of reestablishing that connection. Probably an answer to this question would make question 2 irrelevant.
    2- Do you know if there is a way to export and import a book project created in iPhoto from one library to another ?

    1 - Select  the thumbnail of one of the problem photos and use the File ➙ Reveal in Finder ➙ Original menu option.  This will take you to the folder containing the original file with that file selected by the Finder. 
    You can also use Find Any File to search for that file (get the file name from the Info pane in iPhoto). You will find the thumbnail version and maybe an edited version also.  Made sure what is found is the large, original version and note were it's located.  Search all of your drives with FAF just in case.
    If you don't fine the full sized version then the only recourse is to use a file recovery application like   SubrosaSoft FileSalvage on your drives to see if any of your full sized photos can be recovered.   If you find enough files to make the purchase of the software worthwhile buy it and recover the files.  However, since it may have been quite a while since you discovered the missing originals it seems unlikely you'll be able to recover any due to being overwritten.
    2 - book projects are just entries in the library databases and can't be exported to another library. 

  • Moving high resolution images from PSE6 to Premiere Elements 4

    I am trying to take a pdf map (happens to be of the San Diego Zoo) and insert it into a Premiere Elements 4 (PE4) project to show where we went in the Zoo and then show our family pictures/video in that area
    So I bring the pdf map file into PSE6 and convert it to a jpeg and/or psd file so I can import it into PE4 (which cannot import a pdf). It works fine, but if I don't increase the image size in PSE6 the image becomes super blurry in PE4 when I change the scale (zoom in).
    However, when I do increase the image size in PSE6 and save as either a jpeg or psd so it will be clear at 250% scale in PE4, I get this error message when I try to import it to PE4: "File video dimensions (width/height) too large."
    This happens even when I leave the dimensions (8.5 X 8.176 inches) the same and just change the ppi for the higher resolution I need. It starts out as a 300 ppi image and I get the error message even if I only change it to as high as 500 ppi. (And if I go much lower than that, it's not going to help the resolution enough to be worth it in PE4).
    (btw, the original pdf file is perfectly clear in PSE6 at 1000+% and the converted jpeg/psd are clear enough in PSE6 at 250%)
    So, my question is:
    How do I improve the picture quality in PSE6 so that it's not blurry when I export to PE4 and increase the scale, but maintain the right size that PE4 will accept?
    This might be somewhat of a PSE6 question, but hopefully somebody knows the answer and can help me out! Thanks!

    Joseph,
    In an NLE, you are really only using the pixel x pixel dimensions. DPI/PPI mean nothing, except a larger file size.
    You can set the PPI to 72 and be fine for TV. You might want to bump it up slightly, if you are outputting to a progressive file for display on a computer, but even then, you'll not need much.
    PSD will be as clear a format, as you can get. I'd not bother with any JPG compression, as by the time that you lower the compression settings, i.e. compress less, to keep the quality, you will not have compressed all that much.
    For zooming in, you do not need for the image to be much larger than the preset for your Project. The FAQ's at the top of the page have some good recs. for the exact sizing. If you will be panning, while zoomed out, you'll want just enough extra to allow for that movement.
    Depending on the native resolution of your PDF's image, you should be able to get a reasonably sharp image onto the TV screen. Also, judge the final look of this image on a TV, if that is your final output, as it will appear better, than on the computer screen. I use a DVD RW for this sort of testing and just re-use the discs.
    Last, do all of your re-sizing (as much as is possible) in Photoshop. The algorithms are a bit better than in an NLE. Now, for a dynamic zoom, you have no choice but to use Motion>Scale.
    Hunt

  • How do I get high resolution on my jpg photo

    I have a photo in iphoto that I need to change to high resolution and email it.  HOw do I do that?

    You can not "change" an image to High Resolution - what ever resolution it was created at it the maximum resolution it can be
    the most general way to use the max is to select the photos in iPhoto and export it to the desktop using the highest resolution and quality settings (see the user tip on exporting for details on the options)  and email from there
    LN

  • Sending "high resolution" image to a magazine

    Greetings,
    I have to send a "high resolution" image to a magazine, but I don't know what they mean exactly. I guess I need to send the highest quality photo possible. What export settings do I use in Aperture? I shot the image with a Nikon D40 (6mp) in RAW that was originally in iPhoto then imported to Aperture 3. What ppi, what resolution? TIFF or JPEG? Frankly, I'm lost. Any advice would be greatly appreciated!
    Thanks

    Hi
    Usually magazine's specify what criteria they want when taking photographs,ppi for example, it could be worth asking them.
    For example most people edit in the sRGB colour range but frequently magazine's ask for Adobe1998 colour range, you will have to check...
    you can export from Aperture in whatever format you like...
    In Aperture select (left click) the photo's you wish to export > then go to file > export > version
    Or just right click the photo > Export > Version.
    In the window that appears where it says 'Export Preset' > click the drop down arrow and select >Edit
    Here another window appears and you can choose whatever format you would like to export your photo as..... click ok when you are done. you can export to your desktop then burn to disc or email to your editor.
    Aperture exports only a full res 'version' or copy, of your picture, your original remains with you.
    Dont forget to append your personal data to the picture. ie copyright, contact details etc you can do this in the metadata tab in the library editor in Aperture (left hand side of your screen)
    Tiff is the largest file size but I would definitely give them a call and get their specification from them, that way you wont hack the editor off by supplying the wrong format and miss the deadline.... or sale of your picture.
    Hope this helps
    Regards...... Gerry......
    Message was edited by: windhoveruk

  • Can I expect a video to be in high resolution in an interactive PDF?

    Can I expect a video to be in high resolution in an interactive PDF?
    I’m doing a project in which I want to burn a music video and a image portfolio. The images look very good when exported but the video stutters and is pixelated. Can I expect the video to look as good as if I would burn it in Encore for example?

    Thanks for your quick reply. Sorry, should have said that. I'm using CS5.5
    Thing is, this is going to be a promotion DVD with the video and some pictures. I heard about the interactive PDF and liked the way I could build it like a portfolio, the way you can click through the images
    and click to see the video.Everything looks good except the video.
    I tried to do this in Encore but there I got bad image quality and good video quality. In InDesign I get bad video quality and good image quality.
    My video is made in Premiere pro so maybe I should check the media encoder.
    But, with the project I want to do, what program would you suggest?

  • Edit Low-Res, Export High-Res

    Is there a way to edit with low-resolution video files (for quicker rendering times) and when the project is finished, final cut can access the corresponding high-res files for output?
    Gopro automatically creates .mp4 files and .lrv files after a shoot.  The .mp4 files are 1080p and my computer has trouble even wathcing them.  The .lrv files (stands for low-resolution video) are like 480p and would be awesome to edit with, as long as final cut could keep track of all the snips and affects and apply them to the corresponding high-resolution .mp4 files.
    anyone ever heard of or done anything like this? seems like it would help a lot.

    LeRoyDankins wrote:
    interesting.. multipe drives, i didnt even know FCP kept such good track of all your drives!
    I'm no good in 'details', but like to explain 'concepts':
    when you cut a video, you don't literally splice a 100MB file into two 50MBs ones
    think of FCPX basicly as a data-base: there's a pool of data (Events); there are lists of instructions (Projects) - the lists don't touch the content. Same concept with Proxies: the Preview window is so tiny - why shoveling the GBs back'n forth, if a 'reduced' version is on display anyhow? No need to edit 'natively': the 'edit list' = Project has to use the originals only on export.-
    so, FCPX handles here <counting> six drives. And I'm just a soccer-dad, doin' weekend reports (ok, using 5 cams, all diff. standards - shoestring budget) - no problem. It's me who needs EventManagerX not to get lost with all this games and players and seasons and stuff 
    vice versa: one of the biggest mistakes is to confuse this data-base by moving files 'behind its back' - soooo many reports 'Events lost!', just because some smart moved data OUTside FCPX via Finder - no wonder, the data-base loses track!
    last word about the concept of data base: that's why 'file names' and manual folders are completely waste of time - tags are much better, add as many key-words and meta-data you like - and let the data base find the clips for you (a computer is much faster in search'n find).-
    LeRoyDankins wrote:
    … i'll have to try that out for myself...
    It works surprisingly well! I was a huge fan of iMovie for years, and when switching to the Big Toy, my first concern was 'will it blend compute?' No budget here for a new Mac - and it does perform well. Very well. For a slow guy like me ..........

  • Save file with high resolution progamatically

    Hello,
    I'm trying to export the document to JPEG and PNG formats with a resolution of 300 DPI. I'm using the following code:
    PIActionDescriptor desc00000178 = NULL;
    error = sPSActionDescriptor->Make(&desc00000178);
    if (error) goto returnError; 
    PIActionDescriptor desc00000180 = NULL;
    error = sPSActionDescriptor->Make(&desc00000180);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutInteger(desc00000180, keyExtendedQuality, 10);
    if (error) goto returnError; 
    error = sPSActionDescriptor->PutUnitFloat(desc00000180, keyResolution, unitDensity, 300.00);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutEnumerated(desc00000180, keyMatteColor, typeMatteColor, enumNone);  
    if (error) goto returnError;
    error = sPSActionDescriptor->PutObject(desc00000178, keyAs,
    classJPEGFormat, desc00000180); 
    if (error) goto returnError;
    Handle aliasValue = NULL;
    FullPathToAlias("C:\\temp\\Myfile.jpg", aliasValue);error = sPSActionDescriptor->PutAlias(desc00000178, keyIn, aliasValue);
    if (error) goto returnError;
    error = sPSActionDescriptor->PutBoolean(desc00000178, keyCopy,
    true); 
    if (error) goto returnError;
    error = sPSActionControl->Play(&result, eventSave, desc00000178, plugInDialogSilent);
    if (error) goto returnError;
    returnError:
    if (result != NULL) sPSActionDescriptor->Free(result); 
    if (desc00000178 != NULL) sPSActionDescriptor->Free(desc00000178); 
    if (desc00000180 != NULL) sPSActionDescriptor->Free(desc00000180); 
    if (aliasValue != NULL) sPSHandle->Dispose(aliasValue); 
    return error;
    The file gets saved in the desired format but the resolution is always 72 DPI. Is there something i'm missing while exporting the file with higher resolution?
    Please help..
    Thanks

    Why are you adding a resolution value to the save command?
    It doesn't take or understand a resolution value.
    You need to set the resolution on the document first, then save.

Maybe you are looking for