Export/import portal favorites

Hi, we have NW2004 Portal SP16. Is it possible to export/import portal favorites between users? The reason I asked is that we are planning on using 2 LDAP data sources in production and some users will be migrated in Active Directory from companyA.com to companyB.com. We noticed in our development environment that the favorites are gone.
Thanks in advance

I asked OSS and they said :
you should be able to transport these as an
offline package using ICE. It should simply be a case of transporting
over the userhome directory. However, please insure that the user is
a system principal and has full control of all the userhome
directories otherwise you may experience problems with permissions.
Please see the link below regarding transporting Offline content in ICE

Similar Messages

ERROR WHILE CREATING .DMP FILE FROM .CMD IN EXPORT/IMPORT PORTAL DB PROVIDE

Hi,
I have exported a PORTAL DB PROVIDER in Portal release 2 and downloaded the script for NT. But when I try to
export the .CMD script using this command : myexp.cmd -mode export -s [portal_schema]
-p [portal_schema_password] -c [connect_string] -pu [portal_username] -pp [portal_userpassword] -d [dump_filename], the command line resulted the following :
Mode Selected is EXPORT
then was unexpected at this time.
Could someone kindly tell me what might went wrong?
Thanks.

had the same problem and ended up just letting it prompt me for some of the info. For example, run:
myexp.cmd -mode export -s [portal_schema]
-p [portal_schema_password] -c [connect_string]
it will then prompt you for the portal_userpassword (used to login to the portal) and then the dump file name. Then it runs.

Export & Import Portal OLD 7.01 to Portal NEW 7.4

Dear Experts.
I have exported the content of the portal OLD using-->System Administration--> Transport-Export-->
I have Imported the content of the portal NEW -->System Administration-->Transport->Import.
However in the portal new the Framework page changed the apparence after of execute the process of Import.
Check the before and after in the image.
1st one is using Ajax and 2nd is regular.
My question:
How can reset this and get the Framework page preview to the Import ???

Dear Amit.
I Verified the ajax framework page in system
I tried to add it to portal desktop, however , I dont fount the Portal Desktop
1. Go to System Administration  System Configuration  Portal Display  Desktops & Display
Rules.
I am STOP in the point 2.Open the portal desktop ¿Where Can I find this?
Thanks
Regards

Exporting and Importing Portal users from Source system to Target system

Hi All,
I have exported all portal users from source portal in to file Users.txt do i need to convert this file in to some other format so that i can import these users in Target portal.
any links documents
Regards,
Murali

Hi,
If you look in to User.txt
I have role also i have deleted role in User.txt uploded file with rest of the otherdata including group it it able to create users.
so in Nut shell let's say
1. UID-Murali
Role- Manager
Group- HRGroup
user existing in DEV and i want to trnasfer data to PRD
Role:Manger should exist in PRD, and group is not mandatory optional
but the link http://help.sap.com/saphelp_nw70/helpdata/EN/ae/7cdf3dffadd95ee10000000a114084/frameset.htm
says while uploading users role is optional it throws waring but i got error.
i am bit confused.
Now let's sau there are 10 users, 10 roles and 2 groups in source system if i want to export all users,roles,groups to target system what sequnce i have to follow without getting any error , warining is there any restriction on number of users, roles, groups i know file size should be less than 1MB.
Points are on the way.
Regards,
Murali

Export Import in Portal Rel 2

Hi
How do i export/import Pages and other contents in portal rel 2, pageexp/imp and appexp/imp scripts r not to be found..what has happened to these in Rel 2..
TIA
Bijesh

For the Portal 9.0.2 Export/Import FAQ, try this link instead. The FAQ was just updated today, so the URL was also changed:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1127.HTM
Best Regards,
Harry

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

Export/import utility for portals: opeasst ; where to launch from?

hi all
does this script opeasst.csh have to be run from infra home or the midtier home? i think for exports of pages and portlets from 904, the CH 10 on export/import requires us to launch export from the mid-tier.
however, if i set up the midtier as my home, and intend to use the opeasst.csh, i do not see this script sitting in the directory where it's been suggested to reside:
ORACLE_HOME\portal\admin\plsql\wwu
instead it is in the ORACLE-infra home:
ORACLE_HOME\portal\admin\plsql\wwu
please help. it is URGENT.
I am using OracleAS 10g Portals 9.0.4 version.

I've been doing some runs and had typical DB export's at about 12 GB per hour (compressed to ~7GB file). Typical DB I/0 bottle neck loosened by using different file system/disk to point export at than where the DB data files reside (CPU ~80% of single CPU)
now the import is a bigger item.

How to run Import/Export for Portal Page

Hi all !
I have to export the Portal page .What are the steps I have to follow to complete the process ?I'm new to Oracle portal..
Please help . Thanks in advance
chris

You could check out the Export/Import FAQ for some of your questions
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/DEPLOY_PERFORM/EXPORT_IMPORT_FAQ_1120.HTM
Also see if you can get access to configuration guide for your version of portal. There has to be a chapter on how to use Export/Import utilities in Portal
The simplest way to explain the process is
1. Click on Export link next to the object to be exported
2. Give a name for the transport set and export it.
3. Download scripts for migrating the content and run it in export mode to generate the dump file.
4. FTP the script and dump file to target
5. Run the script in import mode to transfer the contents of dump file in target portal. The usage of scripts in export/import mode is given when you run the script without any parameters
6. Go to the Export/Import portlet and select the transport set for import.
7. View the logs to see if the migration has been successful.
8. Go to the navigator and check if the object you migrated has been brought in successfully.

Portal Export Import with DB on different OS

Hi All,
I have a quick question about exporting the OracleAS Portal Metadata Repository database. Our source DB is on a different OS to our target DB.
We are going to apply the 10.1.2.3 patch and associated portal export/import patches to both nodes (from note 263995.1).
Our understanding was that we would use the method described in Chapter 10 of the Portal 10.1.4 Admin Guide (http://download.oracle.com/docs/cd/B14099_18/portal.1014/b19305/cg_imex.htm).
However, according to metalink note#276620.1, because our source and target OS are different, we should use the database export/import methodology that is described in Chapter 11 of the Application Server 10.1.2 Admin Guide (http://download.oracle.com/docs/cd/B14099_18/core.1012/b13995/prodtest.htm).
Could anyone tell me which way is better, we would prefer to use the database export/import method, has anyone tried this and what are their experiences.
Regards,
Tim.

kirwantd wrote:
We are going to apply the 10.1.2.3 patch and associated portal export/import patches to both nodes (from note 263995.1).
Our understanding was that we would use the method described in Chapter 10 of the Portal 10.1.4 Admin Guide (http://download.oracle.com/docs/cd/B14099_18/portal.1014/b19305/cg_imex.htm).
However, according to metalink note #276620.1, because our source and target OS are different, we should use the database export/import methodology that is described in Chapter 11 of the Application Server 10.1.2 Admin Guide (http://download.oracle.com/docs/cd/B14099_18/core.1012/b13995/prodtest.htm).
Could anyone tell me which way is better, we would prefer to use the database export/import method, has anyone tried this and what are their experiences.
Regards,
Tim.As far as your referred Metalink note is concerned, it gives you three options to move your repository with if you are working with 10.1.4 Portal.
It's a difference of can, should and must.
- It only shows ability to use three options ( can );
- on the whole, it does not give preferences for any method ( should );
- nor does it put a requirement for any single option ( must ).
( the only requirement/prohibition is for the option 2 which is not supported ).
we have used the first three methods given on the note (yes, we also tried 2; this note came later). 1 is what we use regularly for transports between environments; and 3 we use for environment staging (as given in chap 11 of pt. 3). both can be messy with a large repository (we do so for about ~400 GB) repository. but following that supportability guide (Metalink Note 333867.1), method 1 works too.
hope that helps!
AMN

Export /Import of Portal -Urgent -Attn Product Mgr Group

I m planning to move my current portal database to other box (Win2000-> HP)and keeping apache and portal tec stack on current box.
Which of following method is safe and tested.
1. Export whole data base (8.1.7.3) and import it as a full data base on target box.
2.Or export it user wise.All users ,specially portal%.
Please advice how to clone or migrate from deployement to test server.Different documentaion says different things.In document named "Import export in portal', they say portal30 can not be exported.While in Document "Migration of Portal Across Datbases" they suggested to export all schemas related to portal.In portal forum some users mentioned that they migrated from deployment to test/development using full database export ,saying that oracle suggests this, but there is no recovery method for it.
My second objective is to seprate apache from database.Keeping existing apache on NT box (current instance) and data(portal schemas) on HP box.
Is there any thing else to be done except modifying DAD on current apache.
Thanks
Sarvesh

You can do the following to export your portal objects alone (I am talking wrt 30982) . Do it in that order please.
1. Go to the WWU directory where you will find the scripts related to export/import.
2. First run the SSOEXP utility for exporting all the users and groups. (The result is a dump say sso.dmp)
2. Next, run the SECEXP utility for exporting all the previliges of all the users on different objects. (The result is sec.dmp)
3. Then run the APPEXP utility for exporting your applications, you could give the "-security" option here as well (The result is app.dmp)
4. Run the PAGEEXP utility for exporting your pages (This gives pages.dmp).
5. Lastly run the CONTEXP utility for exporting your content areas (This results in contarea.dmp)
These five dumps can be supplied to the corresponding import utilities for importing your stuff.
But, if you are planning to export/import the entire database, then please enquire with the RDBMS migration experts about this.
Hope this helps.

Portal export/import between 9.0.2 and 9.o.3

I am aware that you can not export/import between portal installations on different versions e.g. 3.0.9 and 9.0.2 but is it possible to do export/import between 9.0.2 and 9.0.3?

The FAQ only states:
<<<<Snip>>>>
Portal Export/Import utilities will only work between portal installations that are at the same revision level. For example, Portal Import/Export will copy content successfully between two 9.0.2.x instances of Portal, but not between a 9.0.2 portal instance and a 3.0.9 portal instance.
That said, Portal Export/Import WILL work between two portal instances that are of different "minor" revision levels. For example, Portal Export/Import will work between a 9.0.2.2.14 portal instance to a 9.0.2.2.22 portal instance, and vice versa.
<<<</Snip>>>>

Best practice metadata export/import for WebCenter portal

Hi
I'm using JDeveloper to build the WebCenter portal. When I let's say register a portlet producer along with my portal, the information about it is stored in the metadata. In case I want to move my portal from the integrated WLS which JDeveloper provides to another WebLogic server with WebCenter installation - steps which I need to do are:
1) Export the metadata from JDeveloper
2) Import metadata to my target Weblogic server
3) deploy the application
Am I missing something?
To export/import metadata from JDeveloper to another Weblogic (equipped with WebCenter) server I should use the WLST script, right?
Thanks

A little correction: IAS Version is Oracle9i Application Server Release 1 version 1.0.2.2.2

Any successfull Export-Import in portal 9.0.2?!?!?!?!

Hi all.
Has anybody been able to export/import ANYTHING in the new portal?????? I tried and tried in portal 9.0.2.2.22 on Win 200 and nothing happened. We got no errors but nothing was imported.
Has this worked for anybody on any platform????????? Please give me some hope!!!!!!!!!!
Thanx, Mere.

We had similar problem. After a few consultations with support we decided to first export everything but the pages (templates, styles, ...). It worked ok (no problems or errors). Then we devided pages into two groups - contents and body (decision based on page design - had nothing to do with oracle). We exported one by one (not by bulk actions because we recived errors but every page by hand - it took as some time but at least we got clean export). Import - we first imported the first export (templates, styles,..) then the body and then the contents. With the first export we encountered no problems. But the other two get us the problems with page id`s and no data was imported. Support told us to instll patch no. 2472140. After this install we got "Import of Item failed." in the import log for both. But data was there and we reimpoerted the templates. We needed to publish some portlets and change the page ids (wich we would have in any case).
Best,
Primoz Kumse
K&S Consulting, Slovenia

EXPORT/IMPORT DB PROVIDER NT-- SOLARIS IN PORTAL RELEASE 2

Hi,
I've been assigned to export/import a database provider with all the applications contained therein from NT platform to SUN SOLARIS platform. Can anyone please kindly tell how to do this or where to get the step-by-step guide for this task.
Thanks.

hi,
i am using portal 9.0.4 in windows 2003 server. i am searching for the step-by-step import/export details. you told you have got it. can you share with me the same?
my email id is [email protected] i am in-search of export/import commands. i am able to export through the transport set, but the import will show the importing details, but nothing is available. please help me.
regards
sudhir

How do i export/import the Oracle Portal Online help

hai everybody...
i want to export/import the
Oracle Portal Online Help Content Area
i tried this same as (my own content area
export/import)...but my own content area Pages were worked.....how do i do this..
any help..
thanks in advance
null

The recommended way is to export the User Manager configuration template out (using the AdminUI), import it into your new enviroment (again using the AdminUI - you have to type the password of the LDAP user in since it is not exported) and then initiating an LDAP Synch.

Export/import portal favorites

Similar Messages

Maybe you are looking for