Export/Import Router Settings

I have just purchased a new WRT300N router and would like to export/import all my settings from my WRT54G.
Does anyone know how this can be accomplished??
Thanks in advance for any assistance.

Not sure if you can import it to the new router. I never tried this one.
You may try saving the backed up file configuration. You can do this by:
1. If your wrt54g has a config management option under adminisration tab. Try it there. Under the config management, click on back up and save it in your drive. [dont change the file name].
2. Open the wrt300n setup page. Go to administration, click on restore configuration and browse for the backed up file. not sure if this works, I never heard of importing settings from a different versions/router.

Similar Messages

Exporting/importing compressor settings

I have a number of render settings in FCP which I would like to share with another FCP user who has a separate license and machine. Is the a way to export/import these to another copy of FCP?
Pedro

You write of 'FCP render settings,' yet you've posted this in the Compressor forum so I'll go ahead an assume that you meant Compressor presets that you've created (the stuff in the User folder of the Settings window).
If that is correct, those presets are found in /Users/pedroparamo/Library/Application Support/Compressor, for instance. They'll be .setting files, or in the case of grouped presets, those folders that are not aliases (aka they do not have the little arrow in the corner).
If you need just one setting, select it in the Settings window and drag it to your desktop. That'll make a copy of the choosen setting.
Make sure you compress/archive what you're sending, then attach to an email.
Or did you mean something related to FCP?

Import, Export and Preset settings from TimeMachine

I'd like to recover only my Import, Export and Preset settings of Aperture 3.0 from my backup disk using TimeMachine. Can someone pls guide me on what files to look for and where to find them? (I just reformatted my MBP and hence this query).
Thanks in advance.

You will find the setting in your User Library in the folder
Your Home Directory > Library > Application Support > Aperture
Everything with "preset" in its name might be interesting to you.
Reveal the User Library by going to the Finder main menu bar, select "Go" and hold down the "option" key, until you see the Library in the drop down menu. Select it.
In the Library Finder window navigate to the "Application Support" folder, then "Aperture".
Drag the Aperture folder to the Finder Sidebar for easy access, then open Time Machine.
Go back in Time to the time you want to restore from, then restore the "Aperture Folder" to your Desktop and copy the files you need to your Library.
Regards
Léonie

Import/Export OIF environment Settings

Hi,
I would like to know, if there's way to export or import OIF environment settings from development machine to production machine? And what all configurations can be exported?
Thanks,
Uwaraj.

Hi,
Can you please elaborate what all the setting you want to export/import.....
As per my knowledge in OIM you can only export/import forms. workflows. adapter, email templates, resource object, it resources.
Groups, access policies are not advised to import/export.
Regards
Alabhya Goel

Import/Export OIM environment settings

Hi,
I would like to know, if there's way to export or import OIM environment settings from development machine to production machine?

Hi,
Can you please elaborate what all the setting you want to export/import.....
As per my knowledge in OIM you can only export/import forms. workflows. adapter, email templates, resource object, it resources.
Groups, access policies are not advised to import/export.
Regards
Alabhya Goel

I am reformatting and rebuilding my Win 7 computer. How do I export all the settings from iTunes so I can import them into my new install?

I need to rebuild my computer which has iTunes synced with my iPhone and iPad. How do I export all the settings from iTunes so I can import them into the new install and not have to go through all the setup again? My music library is my own and on a NAS drive so not going to lose it. I am mainly concerned about setup parameters. Thank you for any assistance.

There's nothing to export.
The iTunesLibrary.itl file contains all the settings, playlists, and playcounts.
Copy or backup all your important files including the ENTIRE iTunes folder, then restore all your data including the ENTIRE iTunes folder once the system is formatted and rebuilt/reloaded.

Import/Exporting iVRF routes in IPsec iVRF/FVRF environment

Hi,
I am currently terminating a number of IPsec VPNs into customers' 'inside' VRFs (iVRFs) with the 'classic' crypto-map applied in a separate Front-Door VRF (FVRF) on an ASR1k. I now want to export a VPN route from one iVRF into another VRF using MP-BGP. This works as expected in as far as the VPN prefix makes it into the BGP table, but not into the RIB - it would appear that this may be by design and a route with a next-hop in the FVRF (i.e. the VPN RRI route) cannot be exported from the VRF and imported into another VRF. Is there any workaround for this; the only one solution which looks like it might work is to import/export these routes using another VRF and back-to-back VASI interfaces, using ordinary BGP to leak routes. Another possible solution is also to use sVTIs instead of classic crypto (thus avoiding the RRI route), but this doesn't address the need to support classic crypto.
Cheers,
Matt

Hi,
I am currently terminating a number of IPsec VPNs into customers' 'inside' VRFs (iVRFs) with the 'classic' crypto-map applied in a separate Front-Door VRF (FVRF) on an ASR1k. I now want to export a VPN route from one iVRF into another VRF using MP-BGP. This works as expected in as far as the VPN prefix makes it into the BGP table, but not into the RIB - it would appear that this may be by design and a route with a next-hop in the FVRF (i.e. the VPN RRI route) cannot be exported from the VRF and imported into another VRF. Is there any workaround for this; the only one solution which looks like it might work is to import/export these routes using another VRF and back-to-back VASI interfaces, using ordinary BGP to leak routes. Another possible solution is also to use sVTIs instead of classic crypto (thus avoiding the RRI route), but this doesn't address the need to support classic crypto.
Cheers,
Matt

Yoga 2 11 drops signal on Airport router - change router settings?

i have spent several hours with Lenovo tech supports (all perfectly friendly), trying to fix the issue of the Yoga 2 11 consistently dropping the wifi connection at my workplace. Two important considerations:
* It's not entirely on the Yoga, as it does not have this issue with home wifi, coffee shop wifi, etc.
* And several other PC and Mac desktop and laptops have no trouble with the workplace wifi. The problem is definitely the way that the Yoga interacts with the Airport router.
Lenovo tech support has made numerous changes to my drivers, system settings, and so on, but cannot fix the problem. The next solution is to return the Yoga to factory settings -- a solution I'm convinced will not work as I've already returned one laptop to Best Buy for the same problem. In other words, two Yogas, directly out of the box (presumably with factory settings), had this issue.
My question is -- is there possibly a way I can change the Airport router settings (or set up a new network entirely) that might be more compatible with the Yoga 2 11 with Intel Wireless-N 7260 card? If I can't get the Yoga to talk to the router, maybe the router can be changed to talk to the Yoga.

Which model AirPort Base Station do you have?
To determine that open AirPort Utility, select your base station, then position your cursor over the base station's name. Reply with the text shown adjacent to "model".

Error in Client export/import

Dear all
i have test system i would like to perform client export/import in single system correct if made a mistake
i have export client which create 3 request namely SIDKOxxxxxx , SIDKTxxxxxx,SIDKXxxxxx .i had selected target SID as system same sid bcaz i have only one system
then i login again with scc4 create new client and login in that sap* and pass then when i run command stms_import to import all three transport into that client as said my message server gets disconnected correct me i am wrong
or i have to directely run scc7 bcaz the request already in /usr/sap/trans then these error won't occur i have the back up of database
now i am getting error oracle disconnected
Regrards

Dear Pavan
I tried last night as you said i made new client as 300 in ides and copy user profile to that
when i tried to configure stms by setting CTC =1 when i configure transport routes i don't find any client number
to provide source and target client
kindly send some screen shots if u have that would great support
.Delete the existing TMS configuration.
2.In 000 client by using the user ddic create TMS configuration using STMS.
3.Click on the system, in transport tool tab add a parameter CTC and set it to 1.
4.Now configure the transport routes, there you can find the client number in consolidation routes.
5.Provide your source and destination client and create routes.
Regards

Export/Import and Client Copy

Hi All,
Could you please help me with what are the major differences between Export/Import...client copy...and a System Refresh.How they differ from each other.
Regards
Rajesh

Hello Rajesh ,
I have capture some data from SAP Help :
Local Copy: Copying Clients Within a System:
You can improve the performance of the client copy by, for example, by excluding tables or packages, with Edit -> Expert Settings.
You can exclude tables from the client copy, for example if they are not relevant for the target client, in the Tables tab
Copying Clients Between Systems (Remote Copy):
The same product is installed, with the same release, in both systems
The client copier can copy a client into another system. The systems can be on different platforms. You can change the client number.
When you copy a client from one system to another, the data is transferred directly via the RFC interface - there is no intermediate storage on hard disk.
Transporting Clients Between Systems ;Client export (SCC8):
The client copier can copy a client into another system, which can be on a different platform. You can change the client number.
You are no longer required to transport clients before you can copy them between systems. You can make a remote copy instead.
Up to three transport requests are created, depending on the selected copy profile and the existing data.
The transport request for texts is e.g. only created if the source client contains customer texts.
<sid>KO<no> cross-client data
<sid>KT<no> client-specific data
<sid>KX<no> texts and forms
The data export is performed automatically asynchronously. The output of the export includes the names of the transport requests that are to be imported.
Import transport requests into the target client (STMS)
Choose one of the transport requests of the client transport in the Transport Management System (TMS). The other transport requests belonging to this client transport are then automatically added in the correct order.
Import these transport requests into the target client.
client import postprocessing (SCC7)
You need to perform postprocessing activities to adapt the runtime environment to the current state of the data.
Copy by Transport Request :
This function transports customizing changes that have been recorded in a transport request between two clients in a system.
You can choose whether you only copy the object list of the request or also the object lists of unreleased tasks in the request.
Entries in the target client are overwritten or deleted according to the key entries in the transport request.
Choose Administration -> System administration -> Administration -> Client admin. ->Special Functions -> Copy Transport Request.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/69/c24c0f4ba111d189750000e8322d00/frameset.htm">For more info Click here</a>
Regards ,
Santosh Karadkar

SQL Dev3.0 Prod: Export/Import connection wont accept network path

Update....
SQL Developer 3.0 Production (win xp 32 bit, with JRE download):
Export/Import connection wont accept network path.
but you can map the network path to a drive and use that.
Steps:-
1. setup SQL Developer with at least one oracle database connection.
2. On menu "View > Connections" (if you dont see connection tree window)
3. right click "Connections", do Export to local drive as an *.xml file (eg c:\connections.xml)
4. again right click "Connections"
5. Click Export Connections
6. Click Browse
7. Enter network drive path for the *.xml file
example:- path name as \\MyFriendsPC\path\connections.xml
Result:- SQL Developer wont accept UNC style path
8. On windows folder open C:\
9. Copy c:\connections.xml
10. On windows folder goto \\MyFriendsPC\path\
11. paste connections.xml at \\MyFriendsPC\path\
12. On SQL Developer right click "Connections" on the connection tree box
13. do "Import Connections"
14. Click "Browse"
15. Enter UNC path \\MyFriendsPC\path\connections.xml
Result:- SQL Developer wont accept UNC style path
PS: If you manually enter the UNC path in the box before the "browse" button it works. Or if you mapped to network folder as a drive it works.

So what exacly should I do?What exactly you should not do is mess around with the default cipher suite settings, unless you really know what you're doing, which isn't in evidence.

EXPORT / IMPORT TO/FROM SHARED BUFFER

Hello all,
I am facing a problem with the EXPORT/IMPORT to SHARED BUFFER statements.
In my report program , I export data to the shared memory.
I then call a transaction to park an accouting document.
The BTE 2218 gets triggered in the process. Here the IMPORT works fine.
Later, there is a standard function module which is called IN UPDATE TASK.
Within this, the IMPORT statement fails.
It works on one server but not on another.
Notes :
The IMPORT works in debugging mode but fails if I simply run.
Another point is that the ID used for identifying the shared memory uses sy-uname.
Can the visiblity of sy-uname in UPDATE TASK be controlled by settings ?
Any ideas on this ?
Please don't copy paste the help on SHARED BUFFER etc.
Thanks in advance.

Hi Mariano,
the issue is to due to multiple servers present where SHARED MEMORY is specific for each application server.
So we export data into shared memory in program A, we have to be sure, that program B or FM which is called in background or update task by program A runs on the same application server
Here, the problem is when program A calls the program B or FM in background or update it’s a dynamic scheduling to all application server with have batch work processes and not the same application server that of calling program A always, so program B runs on another application server which has different shared memory.
Solution will be:-
To Force program B to run on same application server as of calling program A by
passing sy-host of calling program A to Function module “JOB_CLOSE” parameter
name “TARGETSERVER”. OR
Instead of using SHARED MEMORY we will use DATABASE.
        EXPORT itab FROM itab TO DATABASE indx(ar) CLIENT sy-mandt ID job_number in programA where job number is unique.
        Then IMPORT itab TO itab FROM database indx(ar) CLIENT sy-mandt ID job_number in program B Where job number is passed from program A to B.
        Then DELETE FROM DATABASE indx(ar) CLIENT sy-mandt ID job_number.
Regards,
Vignesh Yeram

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

How to import Account settings to TB?

In the process of migrating from XP to Win 8, I have rediscovered a very old (ex dial up, payg) mailbox account which I want to start using again but have forgotten the password. The account is already set up in Outlook backup files and has the (encrypted) password.
The ISP (TalkTalk) cannot help with the password because it is an old dialup account with Tiscali and they do not have the records.
TB is already set up and configured for the current mail accounts.
Is there a way to import the .iaf into TB to add to the existing account?
If I set up a new (empty) profile and managed to import the settings from Outlook, can the profiles be merged?
Can Account settings be exported from TB for importing to the new profile?
Thanks in advance

Thunderbird doesn't recognize .iaf files to my knowledge.
Assuming you're using Outlook Express you can use the following link to import your data from OE
*http://kb.mozillazine.org/Import_from_Outlook_Express
If that doesn't work, then I'm afraid you can't transfer your settings over.
I would probably let someone else answer, who knows more about Thunderbird than I do.

Intrastat Exports/Imports

Folks,
As Intrastat declarations are done for EU countries wherein statistics of exports/imports are declared to local authorities.Currently I want to know if any one has implemented the SAP provided standard functionality in ECC5.0.to use standard reports for intrastat declarations.
Additionally I have couple of questions relating to this:
1-Is "Plants abroad customizing" a prerequisite for implementing SAP standard Intrastat reports.
2-Is there any way to add our own customs fields as a parameter to run th SAP standard report.eg:company's own fiscal year.
3-Incase of imports-How can we print few more fields in the output of the SAP standard report(eg.Invoice no(RE)), which does not print in SAP standard report nor has a option in layout settings.(This RE number would help the users for doing VAT reconciliation with Intrastat).
4-Lastly,is there any SAP standard tool or report present in ECC5.0 which can perform VAT vs Intrastat reconciliation.
Friends,not necessary that one needs to answer all questions, but any or all questions answered quickly and correctly shall be rewarded.
Thanks
Gary

Please check this link
http://www.google.com/url?sa=t&source=web&ct=res&cd=3&ved=0CA4QFjAC&url=http%3A%2F%2Fwww.scmexpertonline.com%2Fdownloads%2FKees%2520Intrastat%2520download%25201-23-07.doc&rct=j&q=SAPintrastatfor+EU&ei=Ncm8S-rUMMT38AaA4IHcBg&usg=AFQjCNFWXtBMAjyjJK9ZmxKuIj_3KEABaw
Regard
Sai

Export/Import Router Settings

Similar Messages

Maybe you are looking for