Export import the conf from 1 to a 2nd WLC?

Hello i have now 2 WLC, 1 will be backup of the other (1 in the US, the other in europe, both are connected in the network), same version both of them, i need to have the exact same config on each of them.
The one in europe is in prod since few years, the one in the US is the new one (not configured yet).
What is the best way? --> export the conf of the one in prod, and reimport it on the backup one... then change IP@... ? is it the best way to do?
Thanks for your help.
B

I prefer making a backup and editing the backup and uploading to the new WLC. Sometimes the upload will fail and you will have to edit more than the hostname and the IP's. You will get an error saying the backup failed because of an encryption. The fix is that you might have to delete the usernames and manually enter those in the configuration without being encrypted. This has been something I have had to do recently with the later code versions
Also you need to make sure you have a trailing white space at the end of each command or else that command will not take.
If this becomes painful and the code just doesn't upload without an error. Then configure it manually and then when you are done, compare the backup images on both WLC's to make sure you have everything.
Just to note, I never design a backup that would cross any bug body of water. Your best bet is to have two in Europe and two WLC's in the US. You can get an HA sku WLC for cheap and use AP SSO or N+1. These HA sku WLC provide redundancy and are cheaper because they don't require you to purchase licenses.
Sent from Cisco Technical Support iPhone App

Similar Messages

Error: File Server Input is down while Export/Import the Unv from Desktop C

Hi All,
We have SAP BI 4.0 in Linux and installed the client components in Desktop. when we try to Import/Export the Universe to repository we are getting the Error: File Server Input is down and it's same with Webi Rich also.
We are suspecting the firewall is stopping the Data packets because the person who is working in the client environment is able to do these without any issues.
The main issue with PORTS and we are not at all sure which ports are required to be open.
If anyone has solution please let us help.
Thanks.

They use the ports you assigned during installation.
Tomcat ports are shown in tomcat's server.xml
The port set for CMS are in CMC > servers>properties of the CMS server.
The rest - simple follow instructions in the admin guide and you'll be OK.

I am reformatting and rebuilding my Win 7 computer. How do I export all the settings from iTunes so I can import them into my new install?

I need to rebuild my computer which has iTunes synced with my iPhone and iPad. How do I export all the settings from iTunes so I can import them into the new install and not have to go through all the setup again? My music library is my own and on a NAS drive so not going to lose it. I am mainly concerned about setup parameters. Thank you for any assistance.

There's nothing to export.
The iTunesLibrary.itl file contains all the settings, playlists, and playcounts.
Copy or backup all your important files including the ENTIRE iTunes folder, then restore all your data including the ENTIRE iTunes folder once the system is formatted and rebuilt/reloaded.

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

Suggestion needed in export/import ODI topology from one machine to other

Hi,
I am trying to export all ODI topologies from one machine(A) to other machine(B).Can I export/import whole topology.While doing the same whether created repositories and existing topolgy in machine (B) would be replaced.I don't want to get the existing things in machine(B) to be replaced.Can anyone suggest on this?

you can always select the Import Mode as 'INSERT' if you don't want anything to be overwritten. Yes, you can export/import the topology, logical topology, execution environment by using the options in the Topology tab(top right corner dropdown).

Exporting / importing the Enhancement (or the project?)

Hi!
is it possible to perform exporting / importing of the Enhancement from one system to other? Systems are not connecting, so no TRs are possible...
Probably need to export / import the whole Z project (is it possible?), because Z project contains the enhancement which contains FMs, Funtion codes and screen areas..
Will reward,
Mindaugas.

thanks for reply, Seshu, but in my case systems are not connected, in fact it is transfering from Prod to Dev (special case), so no transport request is available between Prod and Dev...
That is why I would like to know how to do it manually. Of course I will assign Enhancement to some TR when creating it in Dev server.
Full sequence of systems is this:
Prod1 -> Dev2 -> Qual2 -> Prod2
So I need to take Enhancement from Prod1 and create it in Dev2, after transport to Qual2 and Prod2.
M.

How to export/import customization infromation from a java portlet?

I created a java portlet using the methods in oracle.portal.provider.v2.personalize and oracle.portal.provider.v2.preference packages as described in the document adding.customization.pdk.java.v2.html. I am using DBPreferenceStore instead of FilePreferenceStore for my application.
When I am migrating from development to production, how do I export/import the portlet customizations to the new environment along with the pages?

Here is an Oracle doc explaining how to use PrefenceStores (File and limited DB)
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/HOW.TO.USE.PDKJAVA.PREFSTORE.V2.HTML
But more directly applicable, the last paragraph of the API class documentation for DBPreferenceStore explains the information needed to do this.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/JPDK/apidoc/oracle/portal/provider/v2/preference/DBPreferenceStore.html
It explains what table is used to store the data, the default is "JPDK_PREFERENCE_STORE2". And explains that if you use your own, you have to specify the table name in the provider.xml. Since you don't seem to know which table, the implication is that you used the default (and were lucky enough that it was installed...it wasn't on my install of the jpdk).
You should be able to extract the appropriate data from the "JPDK_PREFERENCE_STORE2" table.
I hope this helps.

How to export &import the OSS note?

Hi Team?
How to export &import the OSS note?

Dear Jagadish,
Download SAP Notes from the SAP Service Marketplace and upload them in Note Assistant.
Start Note Assistant (transaction SNOTE).
Download the SAP Note from SAPNet - R/3 Frontend. To do this, choose "SAP Note Download" (Ctrl + F8) and enter the relevant SAP Note number. The downloaded SAP Note appears in your worklist under the category New.
Read the SAP Note!
Check whether the SAP Note entails manual activities. (See also answers to questions concerning ABAP Dictionary objects and messages.)
If this is the case, first perform the manual activities.
Implement the SAP Note. To do this, choose Implement SAP Note. During implementation, Note Assistant may download prerequisite SAP Notes that must be implemented before.
Also read and check the prerequisite notes! This is necessary, since they may also contain manual activities. If you don´t do this, the syntax check can bring up an error of the relevant field of the function module, for example.
Reward points if it helps.
Regards,
Naveen.

Is it possible to import the total from one worksheet to appear in a cell in another worksheet?

Is it possible to import the total from one worksheet into another separate worksheet?

In Numbers terminology a File (of document) contains sheets. Sheets contain tables, and graphic elements (circles, text, lines, charts, etc.).
So...
if you are asking if you can reference a cell of a table in another table in the same sheet: yes
if you are asking if you can reference a cell of a table in another sheet: yes
if you are asking if you can reference a cell of a table in another sheet of another document: no

Error while importing the Entries from Payroll

Dear Guru's
For the First time we are Import the Entries from Payroll , Request End with the Warning message
when i check the Out Put file lot of Errors
eriod Error Codes
EP01 This date is not in any open or future enterable period.
EP03 This date is not within any period in an open encumbrance year.
EP04 This date is not a business day.
DOHA COA Journal Import Execution Report Date: 21-APR-12 10:16
Concurrent Request ID: 424967 Page: 11
========================================================== Error Key ===========================================================
Period Error Codes
EP05 There are no business days in this period.
Unbalanced Journal Error Codes
WU01 Warning: This journal entry is unbalanced. It is accepted because suspense posting is allowed in this ledger.
EU02 This journal entry is unbalanced and suspense posting is not allowed in this ledger.
EU03 This encumbrance journal entry is unbalanced and the Reserve for Encumbrance account is not defined.
Flexfield Error Codes
EF01 This Accounting Flexfield is inactive for this accounting date.
EF02 Detail posting not allowed for this Accounting Flexfield.
EF03 Disabled Accounting Flexfield.
EF04 This is an invalid Accounting Flexfield. Check your cross-validation rules and segment values.
EF05 There is no Accounting Flexfield with this Code Combination ID.
EF06 The alternate account is invalid.
WF01 An alternate account was used instead of the original account.
WF02 A suspense account was used instead of the original account.
Foreign Currency Error Codes
EC01 A conversion rate must be entered when using the User conversion rate type.
EC02 There is no conversion date supplied.
EC03 A conversion rate type or an accounted amount must be supplied when entering foreign currency journal lines.
EC06 There is no conversion rate for this currency, conversion type, and conversion date.
EC08 Invalid currency code.
EC09 No currencies are enabled.
EC10 Encumbrance journals cannot be created in a foreign currency.
EC11 Invalid conversion rate type.
EC12 The entered amount must equal the accounted amount in a ledger or STAT currency journal line.
EC13 Amount is too large.
ECW1 Warning: Converted amounts could not be validated because the conversion rate type is not specified.
Budget Error Codes
EB01 A budget version is required for budget lines.
EB02 Journals cannot be created for a frozen budget.
EB03 The budget year is not open.
EB04 This budget does not exist for this ledger.
EB05 The encumbrance_type_id column must be null for budget journals.
EB06 A period name is required for budget journals.
EB07 This period name is not valid. Check calendar for valid periods.
EB08 Average journals cannot be created for budgets.
EB09 Originating company information cannot be specified for budgets.
Encumbrance Error Codes
EE01 An encumbrance type is required for encumbrance lines.
EE02 Invalid or disabled encumbrance type.
EE03 Encumbrance journals cannot be created in the STAT currency.
DOHA COA Journal Import Execution Report Date: 21-APR-12 10:16
Concurrent Request ID: 424967 Page: 12
========================================================== Error Key ===========================================================
Encumbrance Error Codes
EE04 The BUDGET_VERSION_ID column must be null for encumbrance lines.
EE05 Average journals cannot be created for encumbrances.
EE06 Originating company information cannot be specified for encumbrances.
Reversal Error Codes
ER01 A reversal period name must be provided.
ER02 This reversal period name is invalid. Check your calendar for valid periods.
ER03 A reversal date must be provided
ER04 This reversal date is not in a valid period.
ER05 This reversal date is not in your database date format.
ER06 Your reversal date must be the same as or after your effective date.
ER07 This reversal date is not a business day.
ER08 There are no business days in your reversal period.
ER09 Default reversal information could not be determined.
Descriptive Flexfield Error Codes
ED01 The context and attribute values do not form a valid descriptive flexfield for Journals - Journal Entry Lines.
ED02 The context and attribute values do not form a valid descriptive flexfield for Journals - Captured Information.
ED03 The context and attribute values do not form a valid descriptive flexfield for Value Added Tax.
Miscellaneous Error Codes
EM01 Invalid journal entry category.
EM02 There are no journal entry categories defined.
EM04 The value in the ACTUAL_FLAG must be "A" (actuals), "B" (budgets), or "E" (encumbrances).
EM05 The encumbrance_type_id column must be null for actual journals.
EM06 The budget_version_id column must be null for actual journals.
EM07 A statistical amount belongs in the entered_dr(cr) column when entering a STAT currency journal line.
EM09 There is no Transaction Code defined.
EM10 Invalid Transaction Code.
EM12 An Oracle error occurred when generating sequential numbering.
EM13 The assigned sequence is inactive.
EM14 There is a sequential numbering setup error resulting from a missing grant or synonym.
EM17 Sequential numbering is always used and there is no assignment for this ledger and journal entry category.
EM18 Manual document sequences cannot be used with Journal Import.
EM19 Value Added Tax data is only valid in conjunction with actual journals.
EM24 Average journals can only be imported into consolidation ledgers.
EM25 Invalid average journal flag. Valid values are "Y", "N", and null.
EM26 Invalid originating company.
EM27 Originating company information can only be specified when intercompany balancing is enabled.
EM29 You do not have access to this ledger and account combination.
EM30 This balancing segment value is not valid for this ledger.
EM31 This management segment value is not valid for this ledger.
** Batches listed under "Unbalanced Batches**" have not been imported.
Edited by: 912775 on Apr 21, 2012 1:00 AM

Hi Bharat17an,
Please provide the detail information when create the MySQL connection in your PowerPivot model. Here is a good article regarding "how to Use MySQL and Microsoft PowerPivot Together" for your reference, please see:
http://www.datamensional.com/2011/09/how-to-use-mysql-and-microsoft-powerpivot-together-2/
If this issue still persists, please help to collection windows event log information. It maybe helpful for us to troubleshoot this issue.
Regards,
Elvis Long
TechNet Community Support

Re:Error while importing the TP from dev to quality through change request

Hi Guys,
We have implemented change request and upgraded for SP 15 support pack
when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
You cannot import any requests for project BD2_P00001 at the moment
Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
kindly give ur inputs as it is very urgent.
Regards
Raju

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Error in importing the tables from database

HI ,
while importing the table from the metada by using OCI call 10g/11g i am getting the below exception:
*"Some objects are not imported because of invalid names : (DESCRIPTION =(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)))"*
i am getting this exception after selecting the objects which i want to import from the database.....it first imports the tables and the throws the above exception and then removies from the repository view.
How can i get this resolved???

Hi,
I'm also hitting this problem, did anyone solve this, I'm not able to import any data to the repository, error message is: -
*"Some objects are not imported because of invalid names"*
Thanks,
Mike

Is there any way to import the songs from my phone to my itunes?

I downloaded most of the songs on my phone from another computer. Is there any way to import the songs from my phone to my itunes?

See Recover your iTunes library from your iPod or iOS device.
tt2

Is there any way to import the photos from a DVD slideshow I made in 2007?

is there any way to import the photos from a DVD slideshow I made in 2007? they are set to music and there are quite a few photos on the slideshow. I didn't back up the photos on a separate DVD/CD so the photos are all there but i don't know how to import them from a musical slideshow. Help!

Unless you opted to add the source image files to the DVD's ROM Contents the answer is no.
OT

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.

1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Export import the conf from 1 to a 2nd WLC?

Similar Messages

Maybe you are looking for