Export/import tools is missing under tools in my recent downloaded Thunderbird, Where do I find it?

On my computer 1 in Thunderbird tool bar I scroll down Tool menu and the last post is Import/export tool. When I am now installing Thunderbird in my Computer 2 and look at Tool menu the last post is "Alternativ" the Import/export tool is missing. How do I do to get it on this menu.
Both computer has the same version 31.6.0
Please advice

Thank you very much! Yes now I remember that I downloaded the import/export tool from the page you adviced. Now I have it on my other computer as well.
Thanks and have a nice weekend

Similar Messages

  • Usage of export , import tools in SAP 4.6C

    Hi Gurus,
    Can you please guide me how to do sap data export & import in 4.6C version?
    Kindly guide me how to documents and also any related blogs on this.
    Siva

    Hi Vankan,
    Your question is so extensive that should be explained a bit.
    Could you please be more specific? Which platform are we talking about? DB, OS, etc?
    Which kind of export/import do you want to carry out?: e.g.: client transport, client copy, homogeneous system copy, heterogeneous system copy...
    The technique you will use for that depends on what you want to do and on the platform you are working on.

  • I need to go under tools to enable an app. Where do I find it?

    I need to go under tools to enable an app on my ipad. Where do I find it?

    There's no Tools on iPad.
    Settings>General>Restrictions???

  • ABAP+JAVA system copy using 3rd party export/import tools

    Hi all,
    I am trying to do a homogenous system copy.  I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
    We are running AIX 5.L and Oracle.
    My question is this.  We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images.  Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this?  If so, do you have any information on how to?
    I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
    Any help or ideas would be much appreciated.
    Thanks!

    >My question is this.  We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images.  Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this?  If so, do you have any information on how to?
    That approach is not supported.
    The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
    Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
    Markus

  • Where can I find the Eclipse CEP tool for Eclipse 3.6?

    Hi,
    I looked at the site and could find only the tool for Eclipse 3.5. Where can I find the Eclipse CEP tool for Eclipse 3.6? (http://download.oracle.com/technology/software/cep-ide/11/)
    Thanks,
    Shimon
    Edited by: 884793 on Dec 5, 2011 4:10 PM

    Correct. That's why I said "hopefully released soon"
    andy

  • I imported vacation photos, got the color wheel and did a force quit. Now I can't find any of those photos, and of course I deleted them from the SD card when I imported them. Where can I find those photos?

    I imported vacation photos from my cameras SD card and deleted them when the import was complete. Then I moved them from Events into an Album. When trying to move 2 photos as once to another album I got the color wheel and locked up. I did a force quit but when I go back into iPhoto none of the recently imported photos appear - not in Events, the album, trash, etc. Where can I find those photos?

    backup the iPhoto Library and launch iPhoto while depressing and holding the option and command keys until the first aid window appears - rebid your iPhoto library
    LN

  • Cannot open Import/Export Properties Tool

    Hello all,
    I am working with NI TestStand 2014 and I am trying to use the "Import/Export Properties" tool from Tools -> Import/Export Properties... but when I click it, nothing happens, no window, no warning, nothing.
    The option is obviously enabled in the menu but are there other conditions that I might be missing? Looking the internet for exemples, it just appears trivial that this tool should at least show up...
    Any suggestion would be very welcome.
    Thank you very much in advance!
    Matt.
    Solved!
    Go to Solution.

    Hello jigg and thank you for your support.
    Follwing your advices, I found the "Customize Tools Menu" for which the options of "Import/Export Properties" appear to be correct. I have attached a sceen shot of this window.
    I followed the path to the sequence file "GenericImportExport.seq" given under:
    C:\Program Files (x86)\National Instruments\TestStand 2014\Components\Tools
    I launched this sequence from testStand, the sequence makes a call to a "TSDBComponents.dll" under:
    C:\Program Files (x86)\National Instruments\TestStand 2014\Components\StepTypes\Database\TSDBComponents.dll
    The run fails immediately. The best piece of information I could get is "Error - System Level Exception"...
    By the way, running the sequence "ImportExport.seq" sitting aside the so called "generic" one works properly. However this sequence does not call the same dll so, well...
    Here is a another clue in case it may help:
    - I open TestStand and login as administrator
    - I click on "Tools" -> "Import/Export Properties..." and nothing happens.
    - I close TestStand and get a "TestStand Debug Options Warning"
    I have attached a screen shot of this window. Here is the text it contains:
    References to PropertyObjects were not released properly.
    Total number of objects: 37
    Number of top-level objects: 5
    Note: Some top-level objects may be included if they are referenced by
    an incorrectly released top-level object. For example, an unreleased
    SequenceContext object references a SequenceFile object.
    The following top-level objects were not released:
    Type Definitions [3 object(s) not released]
    Type Definition #1:
    Name: DatabasePropertyMapping
    Type Definition #2:
    Name: DatabaseColumnValue
    Type Definition #3:
    Name: Expression
    PropertyObjects [2 object(s) not released]
    PropertyObject #1:
    Name: PropertiesList
    Type: Array of Containers
    PropertyObject #2:
    Name: ExtraInfo
    Type: Array of Containers
    My TestStand installation comes from "Labview 2014 Automated Test Suite", I am running a windows 7 SP1 64 bits. The TestStand version I have is version 2014 (14.0.0.274) 32-bit under the "Development System" license...
    Since the error I am facing is related to a "system level exception", I wonder if running a 32bit  teststand on a 64 bit machine may be the root cause. Who knows... We have other computers here running the 64 bit version of TestStand and I cannot reproduce this problem there.
    I will try  fresh install and see how further I can go.
    Regards,
    Matt.
    Attachments:
    Customize Tools Menu.png ‏31 KB
    error window.png ‏18 KB

  • How to export/import database from tools menu in sql developer.

    Hi,
    I need to export database from a server and import it on another db server using the export database function under tools menu in SQL developer. How do I import it? This is for Oracle 10g database.
    Thanks

    Depends what are you trying to do? Are you making a database copy or just creating an empty schemea or creating schema with the data?
    With 10g, you have also options of using datapump (expdp/impdp) and conventional export/import which is very usefule and easy to use when it comes to create a clone (duplicate schema) or an export/import of some objects.
    If you right click on table object, you have options of export ddl/export data and import data but thats different thant what expdp/impdp or conventional export/import provides. For very small database you can use sqldeveloper but consider
    using other above mentioned options. Hope this helps
    Regards

  • Photoshop submenu is missing under tools menu in bridge

    I Have downloaded the new Photoshop CC 2014 and updated Bridge. Trying to send some pictures from Bridge to photoshop as layers is not possible because the photoshop submenu is not available under tools.
    Checking Bridge preferences > start up, does not show Photoshop.
    Checking Library> Adobe > BridgeCC > start up, does not have Photoshop in it.
    Can somebody help me restore the Photoshop submenu.
    Thanks
    Rene. 

    Today when I start Bridge it had a message asking if I want to install a "Photoshop extension”.
    So my problem is solved.
    Thanks.
    René Born 
    [email protected]
    El 22-06-2014, a las 14:58, DavyAllan <[email protected]> escribió:
    Photoshop submenu is missing under tools menu in bridge
    created by DavyAllan in Adobe Creative Cloud - View the full discussion
    I have the same problem when trying to do a photomerge.
    Work around by opening files than doing 'add open files'
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6484656#6484656
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Upgraded to Adobe Reader XI - Docusign and Export PDF tools are missing.  How do I get them back?  Docusign through my company is current, and Export PDF through my personal account is current as well.

    As usual, I blindly updated my PDF and now all of my tools are gone...  I used to have a tools menu on the right side where my document signing and export commands were available, and I cannot figure out how to get them back.

    Gee, Pat, this is a  real big help.
    Nobody could possibly think anyone would ask for help without first trying to fix the issue oneself. Or maybe you do. I have opened the file and looked under security. I have changed it to owner-notebook (which is what the techs called me) and clicked accept but geepers it didn't work.
    Maybe someone else has an idea.
    Take Ownership of a File or Folder
    The above should be a link. At least I copied and pasted the link. I did what was stated in there. It isn't like brain surgery. But it is not working. I ended up being able to open some pdf files after transferring them from one partition category to another. I wish it was that easy as you seem to think.
    Thanks for the help. Have a great year.

  • Metadata export/import to other BI tools?

    Metadata export/import to other BI tools?
    Hi ,
    I am using SQL DM 3.0.0.665. I need your thoughs on following.
    As we build our logical/physical models in SQL data Modeler, we create our metadata for our attributes/columns.
    After creating our physical model, other BI and reporting tools acquire access to the physical tables. Each tool has a process of creating their reporting layer and able to bring the tables/columns into reporting layer. It shows the column names as it is. It is not business friendly.
    Do we have a mechanism to export attribute business names as meta data of DB tables?
    If we define the meta data as part of physical model using modeling tools such as Oracle SQL Developer or ERWIN, will we able to import those into BI tools as report elements meta data?
    Where can I find details?
    How do we do that?
    Thanks in helping us out.

    Hi,
    there is no problem if you are building reports on top of our reporting repository - table DMRS_MAPPINGS holds information for pairs - (entity- table), (attribute-column)...., and you can take implementation and business name.
    Exchange to BI tools - you need to know how particular BI tool can recognize and link implementation and business names and then you can use transformation script in order to provide required information. There are examples on this forum how to deal with files and database connection using transformation script.
    Philip

  • I'm trying to import contacts from Outlook to mac address book. I've exported as a CSV but when i try to open with the Address book import tool, the file is greyed out and can't be imported

    I'm trying to import contacts from Outlook to Mac address book. I've exported as a CSV but when I try to open with the Address book import tool, the file is greyed out and can't be imported. Any ideas? 
    Thanks,
    Ian

    If you can't get the exported .csv file to work you might consider using Migration Assistant: http://support.apple.com/kb/HT2518, particular if you need to move more than just your contacts.  There is some granularity in the options on what to transfer but I'm not sure if you can choose to just your migrate contacts.

  • Some files not seen by import tool

    Some, but not all, of my JPG files created by Photomatix HDR are not being seen by the LR 4.1 import tool eventhough I can see and view them in the Windows 7 file system and viewer.
    LR just does not see them but they are there.  I tried closing Photomatix, LR and even rebooting figuring it could be Photomatix not releasing a lock on the file but that does not work.
    This is not an infrequent problem.  It happens to about 20% of the images I create with Photomatix.
    I am not using the export LR plugin

    Below are screen shots.  If you look carefully you will see that the following files are not visible in the LR import tool at all.  They are not greyed, checked or unchecked.  Just not visible.
    blackbird.jpg, F-117 and B-1.jpg, USAF B-17.jpg, USAF F-22a.jpg, USAF F-82g.jpg, USAF FS-454.jpg, USAF Missing Man 3.jpg
    I am happy to upload the files if you give me a suggestion for a file sharing service.
    Thanks for your help.

  • BlazeDS with WSDL importer tool

    Hello I'm using BlazeDS with MXML tags and I manually declare
    the parameters passed to the webservice and this works fine. It is
    however a pain because I have complicated DTO's. An option would be
    to use the WSDL import tool which creates stubs and the objects. It
    would be so much faster to use these generated objects. Has anyone
    ever used this approach? Can it work? I can't seem to make it
    work...
    Thanks

    i have a group called let's say AandBGroup consisting of UserA and UserB. the wiki called AandBGroup is configured "private" and writable (only) by the group AandBGroup. just to be doubly sure that the reliance on group privs was not a complicating factor here, i also added privs for UserA and UserB explicitly.
    i have confirmed that both UserA and UserB can connect (via browser) and create pages in this the AandBGroup wiki.
    i have confirmed (about 50x) that i am entering valid usernames and passwords into the tool, at least based on my current understanding - i have tried using UserA's credentials and UserB's. no difference.
    as a test, i tried creating a new wiki that was publicly readable and writable and using that - still no change. i immediately get the same error message when i try to import.
    the only complicating factors i can think of are that i have SSL turned on on the new site. however, this seems like it would be taken care of by the fact that i specified the new site URL starting with "https://..." -- i.e. exactly what you would use to connect via a browser.
    one thing i've noticed: it seems as though a wiki can be created in multiple ways - either by creating a new group in the Server Preferences app and checking the "create group wiki..." button or by a user simply clicking the "create a new wiki" button from the browser. does it matter how target wiki was created? i checked and the AandBGroup wiki is linked if i look at the AandBGroup group settings in Server Preferences, so it doesn't seem like this should be an issue... but maybe i'm missing something.
    i am running the WikiImporter tool on the server. shouldn't matter, i don't think.

  • Why is the import tab missing under the file tab?

    Why is import missing under the file tab? I want to import bookmarks etc. from Safari into Firefox.

    You can find the Import menu entry in the Bookmarks Manager (Library)
    *Bookmarks > Show All Bookmarks > Import & Backup > Import Data from Another Browser
    *http://kb.mozillazine.org/Import_bookmarks

Maybe you are looking for