Export/import utility for portals: opeasst ; where to launch from?

hi all
does this script opeasst.csh have to be run from infra home or the midtier home? i think for exports of pages and portlets from 904, the CH 10 on export/import requires us to launch export from the mid-tier.
however, if i set up the midtier as my home, and intend to use the opeasst.csh, i do not see this script sitting in the directory where it's been suggested to reside:
ORACLE_HOME\portal\admin\plsql\wwu
instead it is in the ORACLE-infra home:
ORACLE_HOME\portal\admin\plsql\wwu
please help. it is URGENT.
I am using OracleAS 10g Portals 9.0.4 version.

I've been doing some runs and had typical DB export's at about 12 GB per hour (compressed to ~7GB file). Typical DB I/0 bottle neck loosened by using different file system/disk to point export at than where the DB data files reside (CPU ~80% of single CPU)
now the import is a bigger item.

Similar Messages

Problem with the Export/Import Utility when importing a .portal file

Hi there !
I got the following error when trying to import a .portal file to a desktop by using the Export/Import Utility.
<13-11-2009 12:13:26 PM CLST> <Error> <netuix> <BEA-423487> <Import: did not add navigable [2203] as it would cause an illegal dependency.>
The error is shown several times, starting from the number [2203] until [2285].
It causes that i can't see some pages of my portal... it's like they dont exist.
I Hope you can help me fix it, because i have not found any information about it.
Best regards
P.D.: I am using the BEA Weblogic 10.0.1 version.
Edited by: user12231353 on 16-nov-2009 12:38

I upgraded to cs6 and imported all the images together, I made them 3 frames per and exported them. The problem is slightly improved but still there. I'm still getting flicker.
Check it out: http://www.youtube.com/watch?v=g_yZjskzTLs
Black screen version from yesterday if you want to look at it: http://www.youtube.com/watch?v=NCcAEO8YU6Y
The problem has to be with my settings. when I upgraded it deleted all my prefrences and settings. There was no dslr preset either so I had to redo it all from scratch to the best of my ability. Here is a complete rundown of my settings:
I shoot with a canon dslr 60D in 24fps and upload all my stuff in 1080p. Please advice.

Move our Existing Database 8.1.7.3 into 10gR2 through Export Import Utility

Hi,
I want to move our Existing Database 8.1.7.3 into 10gR2 through Export Import Utility in Oracle EBS (FINANCILA) environment.
My Current Setup:
OS: SUN SPARC 8
ORACLE APPS: 11.5.7
DB Version: 8.1.7.3
My New Setup:
OS: SUN SPARC 10
ORACLE APPS: R12
DB Version: 10gR2
I have successfully created Upgraded file R12 file system and installed R12 tech stack.
Now we want to move data from Current to New Setup by using Export/Import utility.
Please suggest me steps or meta link note .
Thanks
Anup

What shoul be better for my case:
Upgrade Paths :
E-Business Suite Releases Available Paths
11.5.8 with 9.2.0.x database Path A
11.5.9 (base or CU1) with 9.2.0.x or 10.1.0.x database Path A
11.5.9 CU2 with 9.2.0.x or 10.1.0.x database Path A or Path C
11.5.9 CU2 with 10.2.0.2 database Path D
11.5.9 CU2 with 10.2.0.3 database Path E
11.5.9 CU2 with 10.2.0.4 database Path B
11.5.10 (base or CU1) with 9.2.0.x or 10.1.0.x database Path A
11.5.10.2 with 9.2.0.x or 10.1.0.x database Path A or Path C
11.5.10.2 with 10.2.0.2 database Path D
11.5.10.2 with 10.2.0.3 database Path E
11.5.10.2 with 10.2.0.4 database Path B
Regards
Anup

10g export/import utility

Hi,
I imported a couple of tables using the export and import utilities. Here is a break down of the process.
-Exported SH schema as SH.
-Created a new user 'HT' as sys, granted it resource and connect roles.
-Ran import utility as HT and imported only 2 tables (sales & products) from the schema export .dmp file.
-The import runs successfully, saying the tables have been imported.
-I run a select against user_tables as HT to find the imported tables, which returns no rows selected.
Why is this?

Hello,
How did you exported the tables?
If you are cloing the entire schema and using conventional export/import utility then do following
exp system/manager owner=userA file=userA.dmp log=userAexport.log
imp system/managet fromUser=userA toUser=userB file=userA.dmp log=userBimport.logAnd if you are importing just couple of tables then do following
exp username/password tables=table1,table2 file=tables.dmp log=tableexport.log
imp username/password tables=table1,table2 file=tables.dmp log=tableimport.log rows=Y ignore=Y
#With tables (make sure table doesn't exists in target schema).
imp username/password tables=table1,table2 file=tables.dmp log=tableimport.log YOu can also use datapump but it has different options and I recommend you should refer to oracle documenation for using datapump.
Regards
Edited by: OrionNet on May 25, 2009 2:27 PM

How to Export/Import "report for the query" to another company

Hello,
I do this:
1.create query in SQL analizer
2.copy paste into SBO query generator and save
3.create report for the query
Then, How to Export/Import "report for the query" to another company ?
Thanks for your HELP.

Look for SAP Note number 600813
That's the note Adele means, I guess.
<b>Edit (@13:18)</b>
The direct link:
https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
---- Replace *SOURCE* with the source database name.
---- Replace *DEST* with the destination database name.
insert into [*DEST*].[dbo].[RDOC]
select [*SOURCE*].[dbo].[RDOC].*
from
[*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
insert into [*DEST*].[dbo].[RITM]
select [*SOURCE*].[dbo].[RITM].*
from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
Hope it helps...
Grtz, Rowdy

Export/import procedure for foreign trade field in PO item

Hi Experts,
I met a problem in import PO. Is there a possible way to make the Export/import procedure for foreign trade field in PO item automatically be determined?
Thanks,
Emily

IF the import data tab shows up is depending on customizing for foreign trade data.
The setting is done in IMG
MM > Purchasing > Foreign Trade/ Custome > Control FT data in MM SD documents > Import screens in purchasing document

Mandatory field Export/Import Procedure for Foreign Trade

Hello all!
Is there any possibilty to define the field Export/Import Procedure for Foreign Trade
within the infoset as a mandatory field?
Table T162 doesn't show me this field.
Kind regards,
Barbara

Hello,
in customizing under "Materials Management --> Purchasing --> Foreign Trade/Customs --> Control Foreign Trade Data in MM and SD Documents --> Incompleteness Schemas for Foreign Trade Data" you can create an incompletion procedure defininig the documents fields assigning a control type. Then in the subsequent customizing step "Foreign Trade Data in MM and SD Documents" you can assign the Incompleteness schema to each country code, choosing import or export.
Hope to be useful.
Best regards,
Andrea

How do i export/import the Oracle Portal Online help

hai everybody...
i want to export/import the
Oracle Portal Online Help Content Area
i tried this same as (my own content area
export/import)...but my own content area Pages were worked.....how do i do this..
any help..
thanks in advance
null

The recommended way is to export the User Manager configuration template out (using the AdminUI), import it into your new enviroment (again using the AdminUI - you have to type the password of the LDAP user in since it is not exported) and then initiating an LDAP Synch.

GroupWise 7 Import Utility for Microsoft Outlook B

Hi,
We use Outlook with the GroupWise Connector, but now we want to migrate to
the GroupWise client.
Most of the users have created a PST file in outlook.
I want to convert the PST files with the novell tool "GroupWise 7 Import
Utility for Microsoft Outlook B".
If I run the tool when I am connected to the archive the folder structure
is created, but only 1% of the mails get restored!!
Is there sometghing I missed?
I have tried to convert the PST file to an older version and I tried to run
scanpst, but the outcome is the same!!
Does someone have a suggestion?
Thanks,
Hein

I would totally agree about the advansys/formativ product. We converted
..PST files that in some cases were 15 to 21 GB (yes gigabytes) in size and
had perfect results. It just takes a long time with PST files that size.
Best part is the Outlook product from advansys is FREE! You install it on a
workstation that has both GroupWise and Outlook. It plugs itself into the
GroupWise client and you start the process from GW client. It goes out to
the Exchange system and/or to the .PST files and begins the migration.
Scott Kunau, CDE, MCNI
eDirectory/GroupWise Consultant
Innovative Global Technology Group
Cincinnati, Ohio
>>> On 2/16/2007 at 6:11 PM, in message
<[email protected]>, Danita
Zanre<[email protected]> wrote:
> [email protected] wrote:
>
>> Does someone have a suggestion?
>
> Quite honestly, the best PST converter I've ever used is the Advansys
> Personal Outlook pack - if you go to www.advansyscorp.com and get the
> Formativ runtime and the free Personal Outlook Utility you will be quite
> happy I think.

GroupWise Import Utility for Microsoft* Outlook* 7

Hello:
I have the following problem: Have client and server Groupwise 7 SP1
installed and two .PST files. I use import utility for import my pst
files to groupwise but i obtained error during the migration.
Groupwise client show Novell Groupwise Groupwise Exchange Archive (PST)
file has encountered a problem and needs to close.
Error Signature gwpstmig.exe ModName: gwmsp132.dll.
I can not import my pst file.

Hi,
This tool is works great with emails but doesn't work with recurrent
appointments or tasks. The outlook contacts is imported as emails
message but it doesn't imported as contacts to groupwise contacts folder.
Regards
> [email protected] wrote:
>
> > I can not import my pst file.
>
> Try going to www.advansyscorp.com and download the Formativ Runtime
version
> and the Personal Outlook Converter. I think this will solve your
problem,
> and it's what I use for all stand-alone PST conversions these days.
>
> --
> Danita Zanre
> Novell Support Forums Volunteer
> GroupWise 7 Upgrade Guide!
> www.caledonia.net/gw7upg.html

How to wrap the export/import utility using perl

Hello,
How to user perl to wrap the export/import utility? Thanks.

If you are using DBMS_SCHEDULER, I would expect that you would just invoke export directly. I'm not sure I see the benefit to putting a Perl wrapper on top in that case. Of course, DBMS_SCHEDULER could invoke a Perl script just as it can invoke a shell script if there was some particular need to have a Perl layer there.
Of course, I assume that you're not trying to invoke export on a regular basis as your primary backup method... Exports should be a complement, not a supplement, to a proper physical backup (i.e. via RMAN).
Justin

Export/import utility from within apex

Hi Friends,
With my knowledge in oracle forms the export/import utility can be called from within a form in runtime
using a push button.But how can i achieve this using a similar button in the oracle apex.
Pls give me a helping hand.Thanks.
regards,
kehinde

Hello:
The Oracle Data Pump utility is now the preferred tool to use to import and export data and metadata from an Oracle database. Oracle Data Pump provides capabilities that far exceed those provided by the older imp/exp programs. Further, in addition to command line invocation of the tool, Oracle Data Pump has a set of pl/sql APIs (DBMS_DATAPUMP) that will let you do import and exports from pl/sql. You can therefore easily set up an APEX page that will accept a bunch of parameters and execute the appropriate procedures within DBMS_DATAPUMP to do the export/import.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/dp_api.htm#i1008009
Varad

Disk utility's will not repair permission launch from option V 1.0(53)

Disk utility's will not repair permission launch from option V 1.0(53)

What is Option V in reference to? What happens when you attempt to repair permissions? Please describe your issue in more detail. Thanks.

4 questions on export/importing graphics for Web and Photoshop.

Hi, I have 4 questions here, and if you can answer one or more, I'd be happy!! :-)
1. In general, can there be a loss of quality when I export a file from Illustrator CS3 to Photoshop CS3, and then re-import it into Illustrator?
My guess is that you can switch applications with one single file, but you have to know what you're doing (any advise? I'm working with files that contain both text with either illustrated graphics or photos).
2. When I switch applications like that, which one is the final application I should save my final work from (for use in print and web)? Does this matter at all? (Example: I have text created in Illustrator. I export it into Photoshop and add a filter, and maybe a blured-layer of the the whole graphic.)
3. After completing the steps in the example above, and I do re-import it all back into Illustrator, the image appears with horizontal path-like blue lines, that let me slice the photo/text if I wanted to. Why does it do this and how do I get rid of those blue lines?
4. When exporting a file for web, what options are you setting for .gif and .jpg in order to NOT see its white background/frame around graphic?

1. Yes. The artwork will be rasterized to a fixed resolution in Photoshop. When re-imported it may appear the same, but it will have limited resolution on output, whereas Illustrator vector art has no (or infinite) resolution.
2. Depends on the artwork and what the client or printer has requested. If you can keep the text editable in Illustrator (blur and some Photoshop filters are available) then you'll have a more versatile and resolution independent file than you would if you switched to Photoshop. In the end, if the resolution of you art is adequate, it's up to you which is better for you to work with, based on your skills and experience. Keep all working files so you can make changes to artwork imported from one program into another.
Some features you might enjoy: You can place Illustrator files into Photoshop and make them Smart Objects. They remember they are Illustrator files and can be edited in Illustrator at any time. Rotate, scale, or distort the artwork in Photoshop and it is re-rendered a the PSD file's native resolution. In CS3 you can add filters to Smart Objects while keeping the vector data intact.
3. I have read about this, but as I'm not fully up on CS3 and don't have it installed on my main system I can't help.
4. To not see a white background for JPEG use a different matte colour. JPEGs cannot be transparent, so some colour must show where you want transparency. for GIF, the same applies, but you can turn on transparency. The artwork will be transparent, but the matte colour will determine how the anti-aliased edges are rendered. Use a matte colour that's as close to your expected background as possible or choose None. PNG 24 supports 8-bit transparency, which looks best of all, but is not supported by MS Internet Explorer versions 6 or lower.

Export/Import utility

With Oracle 10G, do we need to set the NLS_Lang for exporting and importing data.

The NLS_Lang FAQ says the following.
"In Oracle9i the Export utility always exports user data, including Unicode data, in the character set of the database. The Import utility automatically converts the data to the character set of the target database."
But it is not very clear from Export/Import FAQ in metalink.

Export/import utility for portals: opeasst ; where to launch from?

Similar Messages

Maybe you are looking for