Export in frame 1

I have a simple question.
I am using version CS6 and in the symbols properties panel that you get when you right click a symbol (in my library) and go to properties, there is a checkbox under Advanced, and it says "Export in frame 1". Now i know what it is to link a symbol to a class, but i dont know what this means. Should i check it? Please enlighten me on this, I have checked all adobe resources, and have found nothing on it.

typically you would leave that checked.
but if you did not need some resources loaded in frame 1 and their download is delaying the download of other assets and causing a problem, you can uncheck that and, in the publish settings>advanced actionscript settings, assign classes to export in a frame other than 1.

Similar Messages

SWF movie export on frame-by-frame basis WITH actionscript

Hi there,
I know they're two ways of exporting flash movies:
Export the whole timeline. This only allows timeline animations and gets messy because you have to cram up everything on the main timeline.
Realtime-Export via Quicktime. This is a "full blown" export, but heavily dependent on CPU power or speed of harddrive, depending on resolution.
I also work a lot with music programs and there is an option called "mixdown". This will render the whole song - as fast as the processor is capable - to a WAV-file. So time doesn't matter anymore, notes don't get skipped, etc.
I would like to see something like this in flash, too. WITH actionscript.
I just want flash to export one frame for each "onEnterFrame" event, NOT when the timer tells you, it's time for a "next frame". So this would mean not to trigger the onEnterEvent when the appropiate time has passed, but to trigger it, when the next frame can be exported.
Libraries like "TweenLite/Max" are capable of doing frame-based animations, independent from the timer, so everything on that end is pretty fine.
Would be so great if that was possible in any way.
Is it already in CS5? Or maybe an option in CS6... argh, so many years to wait...
until then, I have to measure the fps, look out for the lowest number, export at THAT framerate (in most of the cases just 4 or 5 fps, even on a very fast computer - just because 2 or 3 frames happen to render slower than the other 200) and afterwarts set it to 25 again (I use Blender to do this)

Greg-
Good Lead - Thanks.
I learned that having skinned components (which this uses)
keeps this preloader from working properly. The results were
unstable. It looks like a great little preloader for other things
though.
I also learned that it's a problem that others have
encountered and that hasnt been solved yet...
...."hello Adobe?"
Thanks again for helping me understand this.
JL

Final Cut Pro X Image Sequence Export missing frames per second option?

I am using the trial version of Final Cut Pro X. I can export an image sequence but it will only allow me to do so at 30 frames per second -every single frame!
So a 10 min movie takes half an hour to export 20,000+ frames that no one on earth has time to look thru.
In my old Final Cut Express I was able to choose 1 or 2 frames per second, which was just right.
What am I missing?
Do I need to buy Quicktime Pro or Compressor to allow me to export image sequences without exporting every frame?
Why would Apple even have an image sequence export if it only allows you to export every frame, or it that only in the trial version?
Thank you

I found a free option for you, if you don't already have Compressor 4.
In FCPX create your movie. Then SHARE as a Master File.
Get MPEG Streamclip, which is a free app available here.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Drag your Master File into MPEG Streamclip.
In MPEG Streamclip, select FILE/EXPORT TO OTHER FORMATS.
In FORMAT: choose IMAGE SEQUENCE
In OPTIONS, choose your frame rate.

EXPORTING SCROLLABLE FRAMES TO EPUB

HI ALL,
DOES ANYONE KNOW HOW TO EXPORT SCROLLABLE FRAMES IN EPUB? I AM BUILDING AN EPUB BOOK FOR ANDROID AND I HAVE SOME SCROLLABLE FRAMES THAT WORK FINE WHEN I PREVIEW THEM, BUT THEN WHEN I EXPORT THEM THE FUNCTIONALITY IN TH EPUB FILE IS LOST. DOES ANYONE KNOW HOW TO FIX THIS PROBLEM?
THANKS
CR

thanks Carl.
I had found this same link on the forum, but not being a programmer myself I was hopping there would be a more straightforward solution!
I am having a book a wrote on ibooks author and published with Apple, now trying to also do in a format that would be compatible with non-Apple users, but I am finding that for simple users like me InDesign is a bit of a nightmare! Apple has a number of plug-and-play powerful widgets in ibooks author and trying to get the same functionality in inDesign and EPUB does not seem to be possible.
but thanks for your help and for replying.
CR

Exporting a frame in FCPX

Hi all...
Anyone would know how to export a frame in FCPX? No just selecting a frame with the range tool and sharing it... Is ist possible to export it as a jpg or other formats like in the old FC7?
Thanks a lot...

Go to the Share menu and select Add Destination. From the dialog, find Save Current Frame and double click on it to add it to the list. Before closing out the dialog, select the Image type you want to have saved (default is TIFF, but you might prefer PNG or JPG.)
Then wherever the playhead is in the storyline, you can simply Share > Save Current Frame. The format will already be set and you can press Next, then Save.
When you set up the save current frame option, you can rename the option in the list and you can create several versions (each with a different format), for instance: Export as JPEG, etc...

Getting Data Components to export on Frame 3!!!

Finally went to ColdFusion and some data connectivity.
Installed the Data Connection Wizard and DataGrid Column Editor and
whatever else was there already for data/web services. I'm trying
to get my standard preloader to work:
1) Import the Standard Components FLA from External library
into my main file, making sure Export in first frame is off.
2) In Publish settings set all classes to be exported in
frame 3.
3) Have a 3 frame preloader than jumps to Scene 3 (the main
movie) when done.
4) Scene 2 stores all the crap so it's available (i.e., the
big fat components in use in the movie).
But now that I've added all these data components, there
doesn't seem to be a way to get them to export properly to frame 3,
so I am stuck loading all my classes on frame 1, which makes
preloading useless, because by the time it starts even registering,
it's already done, i.e., no user feedback for a long time than
bang, there you go...if you've not moved on thinking the site has
crashed LOL.
Specifically, I need to get this thing to work with all the
data classes happening in frame 3, by following my steps above as
far as preloader and scenes and AS publish settings goes:
http://www.adobe.com/devnet/coldfusion/articles/guestbook_print.html
I'm lost, I don't see any way to add uncompiled clips or
anything like that...you can't select off export in frame one with
these data components...
Any suggestions?
Shawn

hi x,
I am using an 8 slot chassis at 1 m. You mentioned it being cheaper for a breakout box, but on my end it seems so much cheaper to just take 4-20mA inputs from already amped pressure sensors (I've been looking at the majority of the products out there in regards to bringing in current and converting to voltage...though that doesn't seem to save any cash.... what does your DAQ set-up entail? it may shed some light on how you are able to save some dough). I have only used 4-20mA pressure sensors in the past, though I'd imagine they do make amplified pressure sensors giving a voltage output...and thus using the 9205 I'd definitely save a hell of a lot of cash with 2-4xs the inputs than the 9203 module. In regards to the thermocouple inputs, what is the most cost effective method? It seems that the 9211 modules aren't too shabby for the price, and the other signal conditioning modules (non-CRIO) were just as costly if not more. I could always get a 4-20mA transmitter and convert the thermocouple voltage to the 4-20mA (if I needed to save space on the CRIO chassis).
The present application is in regards to making a DAQ system that gives our customers a wide array of choices for DAQ on their testbeds... It sounds like you guys hit it pretty hard with data-acquisition. I feel greener and greener the more I read these boards, that is in skill level.
In regards to my first questions, anyone else have any other info?
Thanks for the reply X.

How do I export a frame with the Lumetri effect applied?

I've done some color correcting in SpeedGrade (dynamic link in Premiere as the Lumetri effect) and I want to use the Export Frame button in the program monitor in Premiere. It seems like this would be a trivial task, however, I can't seem to export a jpg, png, etc. that keeps the Lumetri effect applied. The exported frame is always raw, back to the frame's original state, missing the adjustments applied by the Lumetri effect. What gives? Is there something I'm missing? Shouldn't it be as simple as clicking this Export Frame button and you get what you see in the monitor, or is this a bug? Also, I've tried through Export Media and Media Encoder to no avail; the effect is still bypassed when exporting single frames/image files. Video works fine.
Anyone else experience this and have a solution/workaround? For the time being, I've resorted to Command+Shift+4 and taken a png screen grab that way, but it would be nice to be able to export the frames directly from within Premiere.

OS X 10.9.5 Adobe Premiere CC 2014.2 Release 8.2.0 (65) Build ...I just did a quick test with a different set of footage in another version of the same project, and it is working. Went back to the original version I was having trouble with, and of course, now it also works. I cannot replicate this problem again. Possibly something funky happening with Direct linking at the time I was having the issue? I restarted my computer and everything, though, and it was still there. Maybe if this happens to someone else they will find this thread and leave a comment with a little more insight as to what's going on.

Exporting still frames

Hi
help cs4 pro
Trying to export still frames from time line.
Go to file
export-- media
Bit map
format bit map
reset ntsc bit map
output name: C;\still\house
save
Adobe Media Encoder comes up
click start queue
hangs
no file created.
Thanks

You're welcome.
You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Happy editing.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Exporting current frame with correct aspect ratio

Hi and thanks for viewing my question. I've created a video in Motion 3 using the preset HDV1080i60 which is the preset for the video I'm using in Final Cut. It's a video of images, text elements and a background video that I created from scratch not a video recorded with an hd cam. I export the video and import to Final Cut and everything is great including the correct aspect ratio. When I export current frame from Motion no matter what setting I use it changes the aspect ratio so it isn't in widescreen format anymore. Any suggestions how to export a frame to maintain the widescreen format like it does when I export as a video? Thanks for the help.

Because Motion is exporting with square pixels...
If you have photoshop, you can do the following:
Now make a new image, go to the HDTV 1920x1080 preset, but change the width to 1728 hit OK... Copy and paste your original image from Motion and scale horizontally to fit (helps if snapping is turned on).
+How I arrived to this conclusion...+
I opened the exported still in photoshop, changed the pixel aspect ratio to d1/ntsc widescreen. Made a new image with the HDTV setting, copied and pasted the image into the new ps file, command clicked the layer (which selects the pasted image), went to edit crop. Then I checked the image size and it gave me 1728x1080...

With PE10 export multiple frames

Hi, is there a way in PE10 to export multiple frames to multiple jpg/bmp files, other than one freeze frame at a time. Or is there a plug in that will do this?

You need to use Export As Sequence in the Share> Computer> Image advanced settings.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Export one frame from the source - PP cs4

Hi
I the older version of Premiere , it was possibel til export a frame to fileformat as jpg, bmp and more, but how can I do this in PP CS4 ??

One little tip, with this process in CS4.1: In earlier versions, one had the option of also Importing that still into a Project. That function has been lost now. If you DO want your still into your Project, just make careful note of its location and name, and then Import it.
I did not like the Import into Project being the default, but I also liked to have the option to do it, if needed. Maybe CS4.2, or CS5 will add the option back?
Good luck,
Hunt

Can anybody tell me where the export current frame option is in the new final cut update? It used to be under the share menu but that menu has now been removed.

Can anybody tell me where the export current frame option is in the new final cut update? It used to be under the share menu but that menu has been removed now.

When I click File> Share> There is no save current frame option. Also Cmd E isn't working either.

How to export still frame from Quicktime movie?

Hello folks
I often need to use a still frame from a quicktime movie as an image file to work with in PhotoShop for windows.
If I export a frame via the export command and choose "Movie to picture" I end up with a .pct file, that Photoshop will not open.
I can open the .pct file with the Quicktime PictureViewer and then export it from that app as i.e. a JPEG-file, but I would like to avoid that extra step and just export a usable file straight from QT.
Anybody know how that can be done?
Best regards
Kris

Same problem here - no matter whether I choose Photo - JPEG or PNG format as the "compressor", QT 7 Pro wants to save with a .pct extension, and changing it to .jpg or .png extension fails to open.
The two workarounds I've found are:
1. Save it in Photo - JPEG or PNG format with a .pct extension, open with Photoshop CS4 or below, save to desired format.
One may be able to accomplish the same using Preview instead of Photoshop, but on my Snow Leopard machine I get the error "The PICT file format is not supported in 64-bit mode. Try selecting "Open in 32 Bit Mode" in the Finder's info window for Preview." and I don't feel like bothering to do this.
2. Use Grab to take a screenshot, copy into Preview, crop as necessary and save to desired format.
Which is easier depends on whether you feel like having to do precision cropping or not. Totally agree with above commenters - whither PICT, Apple?
Message was edited by: Daniel Toman

Export a frame

I want to export a frame, but when I click "export" in the menu "Datei" I do not get the items "film, frame, audio" (how described in the manuel). What to do?
Günter

You are right, I looked in the manual for CS3, because I didn't get any manual for CS4. I tried your solution, but I hoped, that there is an easier way to get a frame as a bitmap. But thanx.

Capture/Export single frame from viewer.

Hi Folks,
Installed is the most current release.
Seems to have lost ability to capture/share/export single frame from viewer.
How do I capture a single frame appearing in the viewer?
Output desired is a PNG file.
Thank you,
Manuel

Click the Share button. Select Add Destimnations and you'll see Still Image in Destination preferences.

Export in frame 1

Similar Messages

Maybe you are looking for