Export in mp4 friert ein

AVCHD Rohmaterial, bearbeitet in Premiere CS6, dies exportiert mit H.264 / HD 1080 i25 in mp4 Format,
und das Endergebnis bei ca. 15 Filme war problemlos. Jetzt machen die letzten 3 Ärger ( evtl. weil Update CS6.03 ) ?
Egal wie ich das Endprodukt auch abspiele. d.h. direkt von der Festplatte des Computesr, über USB an WDTV-Life-HUB oder
auf dem besagten Mediaplayer auf dessen Festplatte kopiert. Das System friert ein.
Das gleiche fertige Material aus Adobe-Link für Blu-Ray in Encore bearbeitet, macht der dort erzeugte Stream
beim Abspielen auf allen Systeme keine Probleme.
Auch der Export mit Androit in der Auswahl wie oben ist Problemlos.
Der Versuch des exports mit HD 1080 p50 Material, erzeugt den gleichen Fehler. Das Programm bleibt ziemlich am
Ende hängen.
Hat jemand eine Idee?
Vielen Dank.
deHoins

Habe das eben auf meinem älteren Laptop mit CS 4 geprüft mit dem selben Ergebnis. Nur pcm-Export ist synchron.
OldAlf

Similar Messages

HT3775 I just made a movie in iMovie and exported in MP4 format, now it won't open, error message says quicktime can't open the file ***? Anyone?

i just made a movie in iMovie and exported in MP4 format, now it won't open, error message says quicktime can't open the file ***? Anyone?

I have the same problem. I'm using Mavericks OS and latest iMovie. Both downloaded last week. I save the movie into File (as directed) and QuickTime
will not open. I'm then directed to a page of formats which are supposed to be supported on which is .mp4. Any tips?

Export multichannel mp4/h.264 with Adobe Premiere Pro CC

Dear community,
we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
However, we are not succentful in exporting a multichannel mp4/H.264 clip.
We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
What are we doing wrong?
Thanks for every suggestion.
Thanks in advance
André

Thanks for your thoughts, Richard.
Your are right, we currentky use the Adobe Premiere Creative Cloud version.
We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
André

How to export as mp4 and achieve effect of "fast start" in mov export

When exporting as a .mov one can check the "fast start" prepare for internet streaming option. This option allows the end user to start watching your video without waiting for the entire file to buffer/download. That's great.
However, when export as a .mp4 file, the same option does not exist.
Does anyone know how to achieve this "fast start" effect if exporting as an mp4?
I have an existing work around...just rename the .mov to .mp4.
I would like an .mp4 file because I use ezs3 to host my videos and the mp4 player options are far superior to the mov player options.
Thanks for your help.

I'm having the same problem. I want to export an .mp4 that can start playing as soon as it starts downloading from a web site. Until I can find a solution, I'm using .m4v files, but they're huge.
Does anyone have a solution?

Adobe Reader X friert ein

Mein System ist Windows XP SP3 mit allen Patchdays eingepielt; AVIRA Pro ist der Virenscanner, nur die Windows eigene Firewall.
- Adobe Reader (im weiteren AR) 9.4. deinstalliert - keine Probleme.
- AR X installiert - keine Probleme.
- AR aufgerufen, Hinweise quittiert - keine Probleme.
- Bei Klick in die Taskleiste verschwindet die Schrift darin und AR friert ein, keine Aktivitäten auf der Festplatte, AR läßt sich mit Klick auf X rechts oben auf dem Fenster beenden. Problem !!!
- Doppelklick auf eine .pdf-Datei. Die erste Seite wird angezeigt, Scrollen und jede weitere Bedienung ist unmöglich. Problem !!!
- Anklicken einer Remote-pdf-Datei im Browser Firefox (FF) - gleiches Verhalten wie im vorherigen Punkt. Problem !!!
- keine Fehlereinträge in den Ereignisprotokollen
- AR X deinstalliert - keine Probleme.
- AR 9.4 herunntergeladen und installiert - keine Probleme
- AR 9.4 auf 9.4.1 aktuelisiert - keine Probleme
- Über Datei Öffnen ließ sich eine .pdf-Datei einwandfrei anzeigen und AR ließ sich bedienen, desgleichen auch eine Remote-Datei im FF - keine Probleme.
Wie bekomme ich AR X auf meine Rechner, so dass er auch funktioniert ?

Habe nun das selbe Problem.
Wir haben zwei "standard Images".
D.h. jeder läd über XenDesktop das selbe Image.
Einmal gibt es ein Image für die standard User, und eines für CAD User.
Die ganze Zeit funktionierte Adobe Reader X
Ab dieser Woche jedoch hängt sich der AR X sich bei dem CAD User Image sofort auf.
Es reicht schon, wenn man nur den Reader an sich ohne Datei öffnet.
Wenn ich im Benutzerprofil unter "\Anwendungsdaten\Adobe\Acrobat\" und "\Lokale Einstellungen\Anwendungsdaten\Adobe\Acrobat\" den "10.0" Ordner lösche, dann funktioniert der AR wieder.
Nach einer Zeit jedoch wieder das selbe Problem.
Eben habe ich probiert, welche Datei genau Abhilfe schafft.
Der AR bliebt hängen, also habe ich nach und nach jede Datei umbenannt und nochmal den AR gestartet.
Wenn es keine Hilfe brachte, die Datei wieder richtig benannt und die nächste probiert.
Als ich die Datei "SharedDataEvents" umbenannte und den Adobe Reader wieder startete, ka kein Absturz mehr.
Diese Datei wurde neu erstellt.
Die neu erstellte Datei löschte ich wieder und nahm wieder die, die davor zum Absturz führte. Doch weiterhin kamen keine Abstürze mehr.
Verwirrend...
Jedoch wird es wohl nur eine Frage der Zeit sein, bis ich wieder bei den ganzen Benutzern diese Datei löschen muss, da sonst der Reader jedes mal einfriert.
Bitte um dringende Hilfe !!!

Export to mp4 audio out of sync

I have a .mov that I'm trying to export as mp4 for web streaming. Actually this is the 2nd I've done and the first went OK. But the 2nd one loses it's audio sync with the video. audio is slow and gets off by maybe 2minutes by the end of the 45 minutes. The .mov is fine but the sync problem is happening when I export to mp4
Here is what I've done:
I record a webinar w/screenrecord2 and first I tried quicktime pro export (Boy it took a long time!!) to mp4 w/default (H.264, 640x480) except slower frame rate and set for webstreaming. The audio sync was off.
I read something about hinting helping audio sync problems so I then tried export to a hinted .mov and then to mp4 and still not good audio sync.
Next I tried export the hinted .mov via Streamclip and it went much faster and better video quality than the export via quicktime pro but still the audio loses sync.
The .mov is about 2.5gig and 45 minutes long exported mp4's about 80meg
Any help is much appreciated!
Is there a way in quicktime pro that I can speed up the audio of the mp4 and get it back into sync??

Hi Robert, i just want to check you are actually going to be posting your material to a real streaming sever i.e quicktime streaming server, darwin server, helix server.
If not then you won't actually be streaming the file, i've been doing a lot of work on streaming servers recently and the first thing i found was that the term streaming is often misused. If you are only posting your file on to a web server for people to view then quicktime has something called quickstart which will allow you to watch the video as it downloads like youtube, this isn't streaming.
With regards to extensions i would be much more inclined to use .mov over .mp4, it will make life easier for your viewers because you can guarantee at some point real player will try and hijack the .mp4 extension for some of your viewers.
Cheers
PS: Can you post hwre the file originates from, it's possible the problem stems from further up the chain but only comes to light when the file is exported. I find editing in quicktime and then exporting can often be problematic.

Export to mp4 720p de-interlaced from 1080i AVCHD

How do I export to mp4 720p de-interlaced from 1080i AVCHD footage from a Sony HDR-SR12? The raw source at 1080i looks fine from iMovie 09' but the exported through Quicktime 720p video is baldy jittered. However, the only previous export I have of the same movie is an iMovie 08' version and sadly not what youtube considers HD source material at 960x540 but it was clear of the jaggies.
The previous exports were made with iMovie '08s medium and large to m4v. The export I made of the same edit was to Quicktime via Movie to MPEG-4, 1280x720 5000kbps/sec, framerate current, Key auto, preserve aspect ratio using crop and H.264 options Main, multi-pass.
You can see the results here. http://gallery.mac.com/mpitogo#100281&bgcolor=black&view=grid download it for best results.
iMovie-edit.png is the edited raw source played back in iMovie
iMovie-export.png is the edited and exported 720p movie bad jaggies on motion.
This looks to be a motion related problem the jaggies are not there for slow moving action. Anyone have ideas to exporting 720p without this jitter?
Thank you in advance!

This has to do with how iMovie 09' handles interlaced footage. The short answer is that it doesn't handle it well. Either de-interlace prior to editing in iMovie or use the 960x540 30p import setting. I know this is the short answer, but it has been quite thoroughly discussed in this forum, so a simple search will provide the long version.
For de-interlacing tools google "JES Deinterlacer". That will get you started.

Error in FCE 4 while exporting an mp4 HD Movie

Hallo,
I try to export an mp4 movie, by using the quicktime conversation mode. I selected mp4 with 20,000 kBit/s. The tests of a short 5 minutes clip were successfull. Exporting the whole movie of 81 minutes was interrupted by FCE 4 after many hours with the massage 'A generell error'. I used an external USB harddisc (70 GB of free space). I also tried to export to the internal harddisc (90 BG of free space): no results.
The error also in Mac OS X 10.5.3 has happened.
What can I do?

That's not right. If i write a Quicktime movie of my 81 minutes long HD-movie, I see the .mov file growing. After 8 hours I got a correct .mov file of 45.2 GB.
But if I am using the Quicktime conversation with .mp4 encoding, the export file doesn't grow and after 6 hours, the file still is 0 KB large. Then FCE interrupts the exporting process and the file disappears. Shorter movies of some minutes were not interrupted!!! But why?
Unfortunately the using of Streamclip 1.9.1 to convert a .mov to a .mp4 file was not successfully too. After 14 hours of converting the file, I just got 51% of the mp4 movie. This seemed to by wrong.

Maintaining quality when exporting to MP4

I'm trying to export my video to MP4, but everything I've tried ends with a drastic loss of quality. Exporting to DV or Sorenson 3 look fine. But exporting to MP4 or H.264 are completely unusable. I've adjusted for higher data rates, more key frames and frame rates...I've selected best quality...I've set it for 640x480 and 320x240...I've tried Compression as well as Conversion and ended with the same results each time. I've also tried to export from Quicktime 7.0 instead of through FCPHD.
I've exported to MP4 with great results before and my software hasn't changed since the last time I exported a project.
Any suggestions? Thank you.
Emac 1.25GHz Mac OS X (10.3.9)

Thank you....
I've tried a couple of different ways:
A.
Select File -> Export -> Quicktime Conversion.
In the Save window, change the format to MPeg-4 and select Options.
In Export Settings, I've changed the File Format to MP4, Video Format to Mpeg-4 Improved and Image Size to 640 x 480 VGA. I've tried different figures for the Data Rate (256, 512, 768) and Frame Rate (29.97, 15, 10).
Last step was to select Save.
B.
In the Save window, leave the format as QuickTime Movie and select Options.
In the Conversion Settings window, I selected MPeg-4 Video (A few other times I tried this using H.264).
I left the Frame Rate at Current but have also tried 29.97.
Key Frames I left at Every 24 frames.
I increased Quality to Best and Data Rate I've tried changing it to Automatic but have also left it on Restrict to 6400 kbits/sec.
The Optimized selection has been always set as Download.
After Selecting Okay, I've tried setting the size as Current, 640x480 and 320x240.
I've always deselected Prepare for Internet Streaming.
After that, I've selected okay and then Save.
Each time the quality of the video has been very bad. Since the source video comes from a DVD and it looks good when I export to DV or Sorenson 3, there has to be something I'm missing.
Janet

Big Color Shift between exported H264 mp4 and Program Monitor

I get a big Color Shift between exported H264 mp4 on Vimeo/Youtube and Quicktime X and Program Monitor.
There are quite a few posts on Quicktime gamma issues, but there seem to be no solutions and the other editors I know don't seem to have this problem.
I know there will be a bit of a shift but this is MASSIVE. At the moment I add a whole extra adjustment layer to all my clips to get it approximately right, but ofcourse this does not solve the issue nor does it give proper results.
Please do not reply with the "You need a real reference monitor via SDI etc etc ..."
By my logic on the same screen the program monitor should resemble what is going to be the final result in a relevant player like Quicktime X which all normal apple consumers use to watch their films. I know VLC and Mpeg streamclip gives different results, but mostly when playing Quicktime/h264 files Quicktime will play it thus average users ( the people I'd like to downwload/buy my films )will watch it in Quicktime.
Furthermore, Quicktime X's gamma/color looks very similar to the image I get on Youtube or Vimeo - which is where all my current work is going. I'm not outputting to boradcast or DVD etc.
Strangely enough the MPEG 2 stuff I've done for DVD matches the Youtube output with the Program monitor.
What am I doing wrong?
I have a Dell 2711 wide Gamut Display which is calibrated with an SPyder 3 Elite using its full colour gamut ( close to 90% of Adobe RGB - thus bigger than sRGB or Rec709) Could Premiere be ignoring the calibration in the Program monitor and making the image values 16-235 and then Quicktime uses all values 0-255? If so, how can I fix this?
Any help will be much appreciated!

I know this has been a while so hopefully you found some help by now, but maybe this will help anyone stumbling across this.
What people seem to be missing in what you are asking is... this is the same file, on the same monitor, but with a different appearance in different software. It is not a question of whether the overall monitoring is GOOD, and it is not a matter of hardware settings (as that would most likely propogate across all software) it is that it is not CONSISTENT side by side on the very same monitor.
I had very similar issues that really seemed to get worse when we got new monitors, which is what lead me to chime in here. The monitors were also wide gamut displays.
The problem is likely this...
1. The difference being shown are the difference between software that properly color manages (i.e. Premier or After Effects) and software that does not (i.e. Quicktime or some web browsers)
2. The reason it is so severe is that the wide gamut monitors are able to show many more colors and thus the difference between the managed and unmanaged software is much more exagerrated than on regular gamut monitors.
I found this great link that helped calm my nerves and helped me get handle on much of what is going on.
http://www.artstorm.net/journal/2009/07/color-management-wide-gamut-dell-2408/
Now that is not to say that the 0-255/16-235 issue is not also involved here. It is definitely possible that a specific codec or compressor is part of the problem, but it sounds like it starts with the color management issue first.
I hope this helps.
Andy

Quicktime pro -I have exported two mp4 to web formats with no problems. all of a sudden it is now stopping and shutting down. I am on a pc with windows 7 Help!

Quicktime pro -I have exported two mp4 to web formats with no problems. all of a sudden it is now stopping and shutting down. I am on a pc with windows 7 Help!

Is the problem limited to a specific file that you're exporting?

Which Version of Premiere Elements Supports Export to MP4 H264?

Which version of Premiere Elements started to support video export to MP4 using the H.264 codec for compression?

That's what I wanted to know thanks. It's a really strange way to support that since you are forced to make an indirect association between a particular viewing device and a resolution and codec.
Is there any version of Premiere Elements that will let me create a custom export profile that I can name with important attributes like resolution and codec name?

How can I export 1920x1080 Mp4 directly from FCP

How can I export 1920x1080 Mp4 directly from FCP

Thanks Russ.
I wasn't thinking about the Apple Devices so much as the Master File set to Audio & Video which produces a .mov file.
I have normally used the Master File to export my videos but will experiment in future with "Computer".
I've taken a closer look with VideoSpec and notice that the data rate of the .mov file is about 70% of the .mp4 and the file size is correspondingly smaller.
The export/render time of the .mov is also somewhat quicker.

AVI clips export (Fehlermeldung: "[..\..\Src\Win\WinFile.cpp-759]") Premiere friert ein beim export

The following problem:
I have 2 adobe premiere project. both have the same film and film length but different video codecs.
1. project (low quality video codecs (mpeg4)
export works fine
2. project (high quality video codecs (avi)
export stops every time after 4% with the following error notice:
"Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-759]"
or if I want export the project with other codecs, eg H.264 then Adobe premiere freezes and I can close Adobe Premiere then.
Premiere memory settings (valid for both premiere projects):
Installed RAM: 3,7 GB
RAM reserved for other applications: 1,5 GB
Ram available for Adobe: 2,2 GB
Optimize rendering for: "Memory"
computer details:
system type: 64 Bit
installed RAM: 3,75 GB
processor: AMD Athlon, 2 x4 635 processor 2.90 GHz
graphics card: ATI Radeon HD4200
windows edition: 7
How can I solve the problem, so that I can export my whole project in AVI codecs without freezing problems or error problems?
Is it a hardware or software problem?
Thanks in advance for your help
Ich bin Deutscher. Ich brauche schnelle Hilfe. deshalb habe ich aus dem englischen forum mein eintrag kopiert und hier eingefügt.
Vielen Dank im Voraus

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link
Most especially the SOURCE FILE codec used... see Question 1

Exported Interlaced MP4 Unplayable

I'm using the DV NTSC High Quality preset in Adobe Media Encoder CS4. The export appears to go fine, but I have trouble playing the video. The video looks very blocky and corrupt. I've tried playing it in Media Player Classic and Windows Media Player using the K-Lite Codec pack.
If I export with Progressive field order (no interlacing), the video plays fine.
I've exported a few mp4 files in MPEG Streamclip using interlacing and they seem to play fine, so I don't think it's an issue with not having the right codec for playback.
Is there something I should change in the export settings? Or is it just my computer not able to playback the files and if so, can I expect these MP4 files to play fine on other computers?

I was expecting that someone would bring that up, but I don't really see how that provides any solution.
I've tried the videos on a number of computers and so far have not found any that were able to play the MP4s. Basically, I want to be able to show the video on any other computer besides just the one I edit on - which is why I brought up the codecs (not sure how else you'd get the videos to play). Is there something else that should be installed or is it a setting I need to change in the export? That's what I'm trying to ask here.

Export in mp4 friert ein

Similar Messages

Maybe you are looking for