Export in QuickTime with "Only Hyperlink"

Hallo! I've a problem! When export in QuickTime from KeyNote, setting "Only hyperlink", the keys with the
action back do not only work while next it works. This happens even if inserts the numeration of the page. Can you help me??!!! Thank you very much!

OK, I may have found the source of the problem: when i tried to play the movie file that I had inserted in Keynote on my PC, Quicktime asked for a codec. In Movie Inspector, I saw that the video was encoded in FLV1...
Any idea where I can get this codec for QT WIndows (I'm searching for it and haven't found it yet)

Similar Messages

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Error Occured in exporting to Quicktime with Conversion

hello... I am gettin a general error on final cut pro and im needing just a little help... When i export to Quicktime with Conversion on the streaming medium setting... i get an Error Occured Message...
This error has never occured before on any of my other video's but with this one... i did add some music to the background and it is a bit longer video... almost 10 mins... What do you think i need to do to export this to quicktime with conversion on the streaming medium setting?
Thanks again,
Charlie Jabaley
SpitYoGame.com

First, try exporting as a selfcontained quicktime with sequence settings and try using compressor for the conversion.
It's unlikely the audio being longer than the video is causing the problem, but try adding a big of slug to the end of the video track so the material on the video track extends to at least the end of the audio.

How can I export a Quicktime with Alpha embedded?

I have a few titles that I've created in Premiere. I've placed these titles into their own sequence and would like to export them as a Quicktime movie using the Animation codec with an embedded alpha channel (Millions+) so that I can import it into After Effects and do some animation work with them. I don't want them against black though.
When I Export Media in Premiere and select Quicktime with the Animation codec, the "code settings" button is greyed out.
Please help. There must be a way to export media with an embedded alpha channel like you can in FCP.
Thanks.

WoOWavE_Sync_Pro,
I don't see what is complicated about it at all. I don't mean to start an argument, but making a title is easy, exporting it with an Alpha channel is easy (as shown above). Where is the problem? Why go to TIFF? I certainly would never "export normally and key out the backgrounf (sic) in AE"
Perhaps you would care to explain your comments in more detail?
If you are interested in the font style I used, it came from Tim Kolb back in the CS3 days or before. I have a link to his styles on my web site. I used to count the downloads, but over the years I lost track.
Of course, having said that, if I was going to have a complicated title with motion, I would use AE to begin with. And I would probably use a downloaded template as a starting point. But that is because other people are more creative than I am. I am just a techie dabbling on the creative side of things.
By the way, I suppose I should get around to testing your product. If I like it, I will post a link on my web site to direct people to it. Feel free to send me an email from my web site telling me why people should use it and what you want people to know about it. And you might want to suggest how to test it as well. I used to get a LOT of visitors every day. It has cut way back since I have not been updating it. Now that I have started to update it again, I expect the visitor count will rise again. The moderator is only doing his/her job. This is a site sponsored by a corporation, and advertising for other companies is probably not good form (besides being against the rules).
http://www.stevengotz.com

Export a project with only segments of videos

I do love FCPX and don't miss FCP7, but there is one thing I used to be able to do that I can't figure out if its possible to do in X.
Many of the video clips I use in projects are hours long, and I may only use a few secs of video from them in a project. In FCP7 in the media manager it was possible to export a sequence using only the portion of the video used (with the option to add handles of any length too). I would like to move a sequence from one library to a new one in FCPX 10.2 and have that option. Is that something that is possible or is that something still on the wish list for FCPX 10.3? (Or is it just me who was using this feature in FCP7?)
Thanks!

Re-reading this now, it sounds like you might be referring to using Media Manager in legacy FCP for archiving.
If that''s the case, then no… FCP X doesn't have an equivalent function.
I think if I were working with the kind of material you describe, I would probably begin by creating a camera archive when the footage was being taken off the camera/recorder. That way, I could preview in the import window and make rough selects when importing to my event.
Here is a quick tutorial on archiving you may be interested in.
Also, here is a third party clip management app that may fit your workflow.
Russ

Export to Quicktime with chapters does not stream

I exported my movie with chapter markers to Quicktime using the "Web Streaming" setting. However, when placed on my web site, it will not play until the entire file downloads. If I remove chapter markers and re-encode the file, it will start playing as it downloads. Is this true for any clip with chapter markers? It happened both in Safari and Firefox. If anyone has some help, thanks in advance. Also, if this was asked elsewhere and I missed the thread, or if I should post it in the Quicktime section, let me know. Thanks!

Yes, it works in older versions. That is what I use.
No. No resolution.
I posted at bug report to Apple more than a month ago but there is no sign of life. I wonder why...? Maybe they have other problems, no time to check bugs found by users?
I think the reason is simple. Some guy at apple does not understand about transparency, and what codecs and (no) compressions that support it. It's a lrge company and difficult for everyone to know everything.
Martin

Keynote export to Quicktime with automaic slide settings doesnt work.

I made a Keynote presentation with automatic settings.
All the animation and slides are going automatically from the beginning to the end, I dont have to click.
But when I want to export it to Quicktme movie, it looses all the automatic settings and doesnt fit the background music .
Would be good to export the movie with the original settings, because it fits/syncronized to the music only with this settings.
How can I keep all the slide/animation settings during the export to QT movie?
Thanks

Thank you!
But I think its not an issue, and I found the solution!
You have to make a Slideshow Record first, with your automated settings/transitions, from the begining to the end: Menu-Play-Slideshow Record
After when you are ready, go to Export-QT Movie, and CHOOSE the SLIDESHOW RECORD, NOT the Self Playing option with the preset timings in the export dialogue box.
With this you can create a QT movie with your automatic settings/sliding/transitions.
For me its working.
=)
Hope I help to anybody!

KEYNOTE - Export to quicktime with slides turned off

I have just done a full set of speaker walkup slide intros and then tried to output to quicktime with certain slides turned off and the ones I wanted to export turned on. Each time I would export the QT movie (for individual speakers turned on and the other turned off) and Keynote would record the first three slides rather than the three further in the deck that I have turned on. Has anybody had the same problem? Maddening!!!

Apple promised a 6 month update scheme, that takes us to May 2014 to sort this out, in the meantime I'm using Keynote 09 for all the stuff, 6 cant do.

Export using quicktime conversion only exports 23 seconds of my project...

Hi,
I am trying to output a promotional video to .wmv format using the quicktime conversion. It only exports 23 seconds of footage before stopping, which is no use at all.
Whats wrong?
I have tried setting ins and outs around the video, and I have tried selecting all the content in the timeline, but nothing seems to help.
Thanks.

DOC EDITOR wrote:
Thank you, very much. The cost of the flip version needed is only $49 so that is not bad, but why would you actually need something extra when the conversion option is available in Final Cut? I would understand if the option did not exist at all and the flip 4 mac would make the option available.
Not on mine. I had to buy a third party product to do that.
AFAIK, the ability to be exporting to wmv is not included with FCS or Compressor or QT. If it appears in your options, you may have installed another app that includes the transcoders and codecs.
Microsoft and Apple do not cooperate in the format wars, neither will support the other and there's money involved. It's a shame becuase Flash is whacking both of them stupid and Silverlight is even kinda cool. QT's days are probably numbered.
bogiesan

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Export to PDF with Working Hyperlink

Post Author: JaeLevel3
CA Forum: Exporting
I saw a few of these questions, and left unanswered. I hope answering this question can help several people.
It appears when the hyperlink starts with http, exporting Crystal to PDF, Acrobat recognizes the link. However, when the hyperlink is to a file on a drive, exporting to PDF, the link is not recognized. Is there a way to have the hyperlink to a file on a drive remain active when exported to PDF?

One of the 3rd-party Crystal Reports Desktop Scheduling tools listed at: http://www.kenhamady.com/bookmarks.html provides a solution for this. It allows you to automate the process of exporting to pdf and then detecting file references in the pdf text and turning them to hyperlinks or detecting invisible formulas and turning them into file hyperlinks.

Export to Quicktime with alpha channel

I'm trying to export my Keynote project to a Quicktime video with a tranparent background. I set my slide backgrounds to None. In the export panel I've selected the "User Transparency" option and under Custom settings I've selected Animation with Millions + colors.
When I export the file it has a white background instead of transparent.
Has anyone else had any success getting this to work?

Do not render the contents of the sequence. If you render, the sequence is exported using the render files. With the sequence unrendered export using the Animation codec with colors set to millions+.

Can you export a Quicktime with multiple audio tracks?

I have a video with split audio tracks.
I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
have they just not been integrated yet?

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

How to export oracle schema with only TABLE and TABLE DATA

Dear All,
Is possible to export (expdp) all tables in a schema?
Thank you in advance

Hi, Yes it is possible:
For example:
expdp user/password direcory=my_dir dumfile=my_dump.dmp tables=schama1.table1,schema1.table2,etc content=metadata_only include=table
OR
expdp system/pass directory=DATA_PUMP dumpfilr=test.dmp log file=test.log schamas=Scahems_name
https://forums.oracle.com/message/4103671#4103671
https://forums.oracle.com/thread/1087857?start=0&tstart=0
ORACLE-BASE - Oracle Data Pump (expdp and impdp) in Oracle Database 10g

Exporting Images With Only Specific Metadata

How do I export images from Aperture with only specific metadata. Example: I want to export my images with only the copyright IPTC metadata (and maybe the keywords or contact info etc., but I don't want the world to see the EXIF data.
Aperture manual (page 507 I think) says to do this I need to make a separate version with only the metadata I want to appear. Er right? How does one do that then Apple!? I know how to make another version by the way, but how can I switch off/strip the exif, but keep the IPTC? Surely the monment I tick the include metadata checkbox in the Export panel and hit go this EXIF data will be inserted as it is inherent with the file?
Can anyone enlighten me please?
Kevin

Time to hit the Aperture feedback page. If you include metadata, you include the EXIF data.
About all you could do is export with no metadata, import the new 'stripped' file and then lift-n-stamp the IPTC data onto it, then export that.
Ian

Export in QuickTime with "Only Hyperlink"

Similar Messages

Maybe you are looking for