Export into fcp

im working with dv ntsc
whats the best way to export out of after effects into fcp so as no render will have to take place
thx
j

Comp menu - Add to Render Queue
Click on BEST SETTINGS - should default to every thing you need
- however... do check TIME SAMPLING -- Time span:... check to see if you want WORK AREA or ENTIRE COMP
Click on Output Module - Click FORMAT OPTIONS
- Should have defaulted to Animation... change to: DV/DVCPRO NTSC
- Don't worry about frames per second... that should have been set properly in the BEST SETTINGS setting.
Click on OUTPUT TO:... send it where you want.
Good luck,
CaptM

Similar Messages

  • FCP 7 export into FCP X, going to try out

    Well I'm going to try and export from Final Cut 7 using a work around and it will be a lengthy export process.
    I have feature length film I'm working on and most of the editing has been done, all in FCP 7. After doing a test run with another small project I've decided that all the effects and editing in FCP X will make it easier and faster to actually finish the feature film I've been working on.
    Soo here it goes. Here's my prep
    Step 1. remove all the filter effects. keep the timing.
    Step 2. Export Video tracks one at time.
    Step 3. Export Audio Tracks.
    Step 4. Import into FCP X all tracks put into timeline
    Step 5. This will be the time consuming part. Remove all the blank space from each Video track.
    Has anyone else tried this yet?

    Macbook Pro
    Mac OS X Version 10.6.8
    Processor 2.53 GHz Intel Core 2 Duo
    Memory 4GB 1067 MHz DDR3
    There were filters such as Magic Bullet Looks, and that was all, but i've not applied them in the new version of the cut i'm trying.

  • Export from FCP directly into DVD studio pro?

    Is it possible to export from FCP directly into DVD studio pro? If not, what is the preferred file format because my exported quicktime files come up as "incompatible format" when I try to add them into my DVD project. Any help is appreciated.

    You need to encode audio as well from Compressor. You'll have 2 files - audio and video.
    Here's a tutorial:
    http://www.youtube.com/watch?v=wFgJpd7DEWw
    Message was edited by: Eric Pautsch1

  • Color graded sequence won't export back into fcp as an xml or send to

    Hi,
    I've finished a film and graded it. when everything is rendered, I export using either send to or as an xml. Both stop at around 50%. on the xml I get the following report.
    I started out at a 20 min sequence then a ten minute sequence now I'm down to 5 minutes. i've got a 146 minute movie to grade and get back into fcp.
    Any help much appreciated.
    Cheers
    Peter
    Mon, Jul 20, 2009, 14:07 - Errors Found Importing moral conflict 15min sequence.xml
    <xmeml>: Unknown element <sourceprojecturl> encountered.( line 4 )
    <sequence>: Unable to create new <sequence>.( line 5 )
    <sequence>: Unable to create new <sequence>.( line 5 )
    <sequence>: Unable to create new <sequence>.( line 5 )

    The order of execution is confusing me.
    On your first attempt, you tried sending the entire 146 minute project, graded and rendered it. Correct?
    On Send To FCP, the XML failed... (hardly surprising)
    This is where I get lost. Are you creating new, shorter versions, grading them and attempting to round trip the short sequences? and... if this is so, how are you differentiating these from the original monster failure? Do you have new render directories, paths, XMLs? Once an XML has been sent, it must not be re-used or re-sent or it will start appearing as ambiguous clones with conflicting path references.
    And 146 minutes is too long for any single subject unless it is a remake of Warren Beatty's "Reds" or "Spending a little over two hours on a beach with Jessica Alba" so make it shorter... ;-P This is an undocumented feature of COLOR. No, really!
    jPo

  • Audio help wanted exporting to QT and back into FCP.

    I have a sequence with live sound on A1 and A2, music on A3 and A4 and some extra voice on A5 and A6. I have gone into audio outputs and clicked "6 outputs" and "dual mono" for each and tried checking all the options for "Discrete channels" "Stereo down mix" etc. Whatever happens when I reimport the QT movie into a fcp sequence I get the 6 tracks but the whole mix always ends up of 1 and 2 with the other tracks blank. How can I get all the tracks to carry accross individually all the way?

    I've sent a test to the broadcaster using this method. When I reimported the QT file back into FCP it was possible to separate the live sound from the music etc. I'll have to hope it's OK otherwise I'll have to do the odd suggestion of the editor of converting all the audio files to AIFF and re-laying them into the project and then exporting the whole lot as a QT file.

  • PROBLEM SOLVED "export clips from Color back into FCP & add transition"

    If I have two clips that you cannot place a transition in between here is the only thing that worked for me.
    I discovered this problem after I exported my movie clips from FCP 6 to Color and imported the color corrected files from Color back into FCP 6. I could no longer add transitions to any of my clips unless I made the following changes.
    1. 1st check to see if the video clip has an audio track underneath it. If they are not linked Select the audio and the video track to be linked, hit Command "L" and you will see an underline under the audio and video name to show that they are now linked. Do the same for the adjoining video and audio track.
    2. Next select all of the clips after the video clip you just selected by typing "tttt" this changes to the "Select All Tracks Forward Tool". Click on the track after the video track you just linked and it will select all of the tracks thereafter. Hit the "A" button to change back to the selection tool and move all of the selected tracks away from the previous video/audio track.
    3. Next type "RR" this will change to the "Ripple" tool. Now click on end of the video track on the previous video clip and type -15 (for negative 15 frames). Then click on the beginning of other video clip to the right that you linked and type +15 (for plus 15 frames).
    4. Type "tttt" to change back to the "Select All Tracks Forward Tool" the hit the "A" button to change back to the selection tool and drag all tracks back together again.
    5. You may then drag and drop your transition in between both video clips.
    I hope this helps someone...this is the only thing that worked for me!!!
    Number1talent

    I am working with mostly DVCPro ftg, with a few clips in MiniDV.  I did have roughly 10 clips with speed changes, but they exported fine two weeks ago, when I did this the first time.  (Actually, it didn't keep the speed changes, but it did export with media to FCP). 
    The clips do have reel numbers and seem to be of the right length per clip but there's just no picture and no assoicated media with which to relink the clip.
    I'm on Color 1.5.3
    Any possible ideas?  Thank you for your help...

  • I have upgraded to Mavericks and I now cannot import DV into FCP through the capture presets.

    Since upgrading to Mavericks, I cannot import DV vision through my Sony FX-1E. I have tried various connections - DV to Firewire 400 + 800 with no success. I now have to get the vision ingested at another facility and exported to a hard drive in order to edit.
    Is there a way I can get vision into FCP?

    FCP (not FCPX) is legacy software, now EOL and not designed or guaranteed to work with Mavericks, some people report no problems others do, it depends on your setup. I'd suggest using iMovie to capture your footage then transfer to FCP to save using (or paying) another facility. An alternative (and my own solution) is a second boot drive with 10.8.5 and FCP 7 which still works OK.  

  • Fotomagico into FCP

    Fotomagico boards are rare and very few topics on FCP integration so I thought I'd try here.
    Here's the problem. I've made a slideshow of 18 slides. When I import into FCP and drop in the timeline I first off have to drag the clip on both ends to resize. Not sure if it's supposed to be like that. Then I only get 13 of the slides then it cuts off. If I slow it down in the controls and drag more I get all the slides but their half the original duration. If I slow it more to lengthen the duration the slide length stays the same but I get extra black at the end to cmpensate for more time.
    Is David S. out there? He seems to know this app pretty good.
    Thanks.

    Good luck then.
    I just save the project file, and then amend as needed.
    But my goal is production of content. I'm interested in creating it without issues.
    If I need to edit the content, I just go back to the project file, make the edit, and export.
    I'm not a "bells and whistles" person, and I am not saying you are. I need to get things done, and this way is an editing best procedures for me.
    I don't have to understand the generator part, because I don't use it, find no need for it, preferring the smoothest path to getting things done.
    Can't help you with your workflow, because I don't use it.
    best

  • How do I get a Soundscape (Logic Pro X) into FCP X?

    I want to create a Soundscape to use in FCP X but I can't get the Soundscape to record anything to export.
    This is because I am completely clueless on using Logic Pro X.
    I have downloaded a YouTube tutorial based on Logic Pro 9 but this app seems to bear little or no relation to X and the tutorial is meaningless (to me).

    Hi
    "Soundscapes" are a new 'genre' of software instrument Patches in LPX
    To the OP
    You'll need to record or step enter some MIDI note events in Logic. When you are happy with the results you can Bounce (or Bounce replace) to get an audio file that you can import into FCP.
    You might also be able to make use of the FCPX xml export function.

  • QT import into FCP for chapter generation

    Can you import a .mov file into FCP to create chapter markers for export.
    When I import the .mov file the canvas viewer turns red and locks up.
    David

    What was the source of the movie? i.e. what format is it? codec used?
    You can add chapter markers in FCP...
    Jerry

  • Problem with importing a Motion project into FCP if it uses a Boris filter

    Had an odd and highly frustrating experience. Was using a Boris Continuum filter (the posterizing one) on the background of a Motion project (was using it to age a background of a brick wall to age it and give it a more 'nighttime' look).
    When I imported the file into FCP to use as an intro there, the background disappeared entirely. After an hour of troubleshooting, finally figured out that it was the Boris filter that was causing the problem (it also was probably responsible for the random crashing of FCP I was experiencing), as when I disabled the filter and re-saved the project, it worked beautifully.
    Is this a 'normal' problem when using Boris filters? Do I have to export every Motion project into a Quicktime file before importing it to FCP (and possibly DVDSP) if it uses a Boris filter?

    Thanks! Now the frustrating thing is that the client doesn't want to use what I created after all...bah humbug
    It's not the RAM (which is either 8GB or 16....not sure on that computer). Got an e-mail from Boris Support that implied that this will happen all the time...that you have to export all projects before you use them in FCP or DVDSP or the Continuum filters won't work (loved how the support person suggested that I just use the filter in FCP...which defeats the purpose of creating something in Motion! But I digress...) Told me I had to buy a $500 program called Automatic Duck to get things to import properly...and that Boris filters won't work with the latest upgrade of FCP, btw.

  • How to import premier xml file into FCP X?

    Hi There,
    Premier has an export to "Final Cut Pro XML" option but how do you import these files into FCP X?
    If I navigate from within FCP X, the file is greyed out and if I right click from the finder and open in FCP X I see the error:
    The document “V1-0008_M07-1538.mov.xml” could not be opened. Final Cut Pro cannot open files in the “XML text” format.
    I'm using FCP 10.1.1 and Premiere Pro CC 7.2.1
    Any pointers in the right direction would be much appreciated.
    Cheers

    Looks like this is the only option: https://itunes.apple.com/us/app/7tox-for-final-cut-pro/id496926258?ls=1&mt=12

  • Canon XF 305 media into FCP problem

    Hello
    I used two XF 305s on a shoot yesterday and then ingested the files with Log and Transfer into FCP. Worked fine with the 3 cards from one camera but Log and Transfer didn't see any of the 3 cards recorded on the second camera. I tried to add them manually but got an error message saying the folder contained unsupported media or has an invalid directory structure. The cards are viewable in Canon XF Utility and seemed to have the same properties as the 3 cards that worked.  I tried making a backup and transferring that in FCP but same error message. The only way i can get them into FCP is to export to MXF and bring them in with XDCam transfer which doesn't seem to support anything bigger than 2 gb and the audio is out of sync. Frustrating day!!! I'd be SO grateful for any answers or guidance!
    Thanks
    Deborah

    Hi Deborah,
                      I don't mean shutter speed, I mean framerate, two different things. If you shot 50 frames per second (50p) as opposed to 25 frames per second which is 50i, Log and transfer won't recognise the clips.
    DM

  • Quicktimes from AVID into FCP

    I exported a final piece from AVID Adrenaline as an uncompressed Quicktime. I took that QT to my Mac (G5, OS 10.4.1, FCP 5.1.4), and imported it into FCP. The resulting clip has audio, but the video is completely white. The QT also does not play on Quicktime 7.1.2, though it did play on the Mac Quicktime 7.1.2 on the Adrenaline system.
    I dug around, and it appears that the problem might be related to the AVID codec for QT exports (which I don't quite understand why there would be a particular AVID codec if it's uncompressed). I went to the AVID sight and downloaded the codec they have for Intel macs and installed it. That did not have any effect. I gather from the posts I see on the internet that this is a problem that can have many unrelated reasons... any ideas? Or is there an AVID export codec that I should use on Adrenaline that is more consistent with FCP?
    Thanks again in advance for your wisdom,
    Andrew

    I don't know your timeline codec in Avid, but I had the same problem. The thing is that avid codecs are "special", so special that avid is the only one that can read them. I was working with dvcpro timeline and if the "use avid codecs" was checked in the export settings it wouldn't play in fcp. So don't check the "use avid codecs" if you plan to export to fcp. One workaround I found few years back was to install avid free dv and then I got the avid codecs to work but it seems that avid has stopped the avid free dv project Hope this helps.

  • Paid job: convert .stl file into .xml to import into FCP. Anyone?

    I need someone to convert my two .stl files (subtitles) exported from DVD SP and convert them into files (.xml?) compatible with Final Cut Pro. I need to Import these files into FCP and burn a Quicktime file with subtitles.
    I can pay someone (not millions!) to do this, since I have no clue and anything I was suggested doesn't work.
    Thanks
    Paula

    Can anyone help me?
    I absolutely need to import the subtitles into Final Cut and re-writing all of them manually would take forever.
    Please let me know if there is any program I need to use.
    Thanks for all tips
    Paula

Maybe you are looking for