Export issue --EXP-00028

Hi Experts,
I have a auto exp job works well.
one week ago, It is stop. I try to manual run code and got some message as
D:\OraHome1\bin>exp USERID=system/scott@test full=y direct=y compress=y f
ile=D:\test_BACKUPS\exp_2009318.dmp log=D:\test_BACKUPS\logs\exp_
2009318.log
Export: Release 9.2.0.6.0 - Production on Thu Mar 19 12:34:38 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
EXP-00028: failed to open D:\LEADS_BACKUPS\logs\exp_2009318.log for write
EXP-00000: Export terminated unsuccessfully
But I can create new folder at D driver. also Oracle is install and working on D driver.
I believe there are no permission. is it true?
I wrok on oracle 9.2 at wondow 2003 server.
How to fix this issue?
Thanks,
Jimmy
Edited by: user3202414 on Mar 19, 2009 9:41 AM
Edited by: user3202414 on Mar 19, 2009 9:42 AM

Hello,
Look at your export statement and error message and tell me if this looks odd to you or was it a typo. Also try without using log and see if it goes thru
D:\OraHome1\bin>exp USERID=system/scott@test full=y direct=y compress=y file=D:\test_BACKUPS\exp_2009318.dmp log=D:*\test_BACKUPS\logs\exp_2009318.log*
Export: Release 9.2.0.6.0 - Production on Thu Mar 19 12:34:38 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
EXP-00028: failed to open D:\LEADS_BACKUPS\logs\exp_2009318.log for write
EXP-00000: Export terminated unsuccessfully
Regrds
Edited by: OrionNet on Mar 19, 2009 2:03 PM

Similar Messages

Urgent EXP 00028 Error

Hi All,
While taking Export i am getting Exp 00028 error
i have typed
C:\>exp userid=apregs_admin/apregs_admin file='D:\DB_Backup_08052007\fulldump\08
052007.DMP' log='D:\DB_Backup_08052007\fulldump\08052007.log' full=Y;
Export: Release 10.2.0.1.0 - Production on Tue May 8 13:08:20 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00028: failed to open D:\DB_Backup_08052007\fulldump\08052007.log for write
EXP-00000: Export terminated unsuccessfully
plz help its urgent

Sorry i found out my mistake
i did
C:\>exp userid=apregs_admin/apregs_admin file='D:\DB_Backup_08052007\fulldump\08
052007.DMP' log='D:\DB_Backup_08052007\fulldump\08052007.log' full=Y;
i have to
C:\>exp userid=apregs_admin/apregs_admin file='D:\DB_Backup_08052007\fulldump08052007.DMP'
log='D:\DB_Backup_08052007\fulldump08052007.log' full=Y;

Exporting using exp and TRIGGERS=N doesn't work

Exporting using exp on version Export: Release 8.1.6.0.0 - with the option TRIGGERS=N stills exports with triggers. is it a bug ?
Any sugesttions ?

This is actually a known behaviour.
As of table level export, all the dependent objects are exported and is expected namely, indexes, constraints, triggers... and even restricting with other parameters set to n will not disable their export.
As of schema level export, the whole schema is exported and with this we can pose our restrictions like no constraints, no rows, no indexes, no triggers etc.. which will work because we have control.
For table level export we dont have control on individual objects. 10g solves your problem.

Bizzare export issue

Here is a very weird export issue. Windows XP.
Project is set at h264 1920x1080 mono audio 29.97 fps
I have 30 shots that make up the sequence. Each shot is exactly 90 frames. I exported each sequence at h264 1920x1080 with one channel of audio. The first shot exports just fine and is 5 MB. The second shot exports at 10 MB. The third is 15 MB, the tenth shot is 50MB. But the picture is still 90 frames for each shot. BUT, when I export without audio each exported file is just 5 MB. If I look at the properties of each clip the duration of the video and audio is just 90 frames. If I open one of these clips in QuickTime Pro and re-export it as source then the files size goes back to 5 MB; same video, same audio yet with the correct file size.
Anyone seen this before?
Is there a setting that could be incorrect?
-cablet

Weird, man. Not sure what might cause that.

Crystal JRC PDF Export Issue

We are experiencing a PDF export issue with Crystal JRC version 12.2.202. The PDF report shows 1 of 3 pages but ONLY the first page is generated. When this occurs, ALL other users that are exporting to PDF experience the same issue with any multiple page report. I can't find any errors in the log that would indicate what the problem is. To resolve the issue, I have to recycle the WebLogic application server that hosts the JRC, which would indicate something gets "locked" in memory and gets cleared when the app server is bounced.
Any ideas on how to resolve this ?

Hi Ted,
Thanks for the response!
Though, the mentioned Sun JVM Bug explains the root-cause, the Bug status also state that it is not fixed yet.
Also, we are reluctant to change the JVM Option to -Xint due to unknown impacts on JVM optimizations.
Is there a patch released for CrystalReports to deal with this behavior? We are using CRJ runtime 11.5.7.620 and seeking for a patch on this version.
Thanks.

PP CS5.5 FLV To MP4 Export Issues / Problems

I just upgraded from Production Premium CS5 to CS5.5. I do a fair amount of converting/exporting of imported FLV files (downloaded from internet news sites) to H.264/AAC w/ MP4 wrappers using Premiere Pro (PP) and Adobe Media Encoder (AME). My equipment is a 1+ yr. old HP Win 7 Pro w/ an Intel i970 Quadcore, 12 Gb RAM and MSI nVidia GTX 470 GPU. I have never experienced any queue or export issues w/ CS5 (at least that I noticed), but I am experiencing noticeably degraded queue export and direct export problems with these files in CS5.5.
Description: (1) The queue export times for the exact same imported FLV clip(s) using the exact same sequence settings and H.264/MP4 export settings are noticeably slower in CS5.5 (sometimes 2x, depending on the export settings, e.g. using maximum render quality) than in CS5; (2) My MSI Afterburner GPU monitoring software indicates 5-10% GPU usage during queue/export in CS5, while indicating 0% GPU usage (flatline) in CS5.5; and (3) When I attempt to direct export these files using CS5.5 I get the following error message: "The source and output audio channels are not compatible or a conversion does not exist."
I suspect that it may have something to do with "conforming" anomalies when the FLV file is imported into PP, but I would put that squarely in the category of rank speculation on my part.
Has anyone experienced the same or similar problems or have any insight into what may be the problem(s)? Of course, thanks for any help/insight you can provide.
Jim

What do you mean by a better routine?
A better compression routine than H.264.
Is the quality better than H.264?
Yes.
Does this use an MOV wrapper?
Yes.
Also, would it import correctly into PPro?
Yes.
we would import files into PPro exported out of FCP and would get a red pixelated glitch during preview and export. Does this codec solve this problem as well if it is an MOV wrapper?
I don't know anything about FCP.
Sorry for all the questions, just want to get things right before diving into a new codec.
It's harmless, and free.
Download it and run some tests.

Simple flash export issue

hello
I'm trying to export a flash video using Adobe media encoder from Premier Pro, but when I do I get this error " there are no clips to build".
I have another file that I am able to export and it does not have this problem.
They are Windows Media files and play in Premier fine. I am using Premier Pro CS3.
Lastly, I'm not a video expert but I really need to get these up on the web for work, there is a lot of pressure and I need to get it done.
Regards,
Tom

fixed the exporting issue.

EXP-00002: error in writing to export file EXP-00002:   EXP-00000: Export terminated unsuccessfully

Dear All,
<code>
. . exporting table
CDM_HIST_INFO_SERV_RES_DEF
0 rows exported
. . exporting table
CDM_HIST_INFO_SLA
0 rows exported
. . exporting table
CDM_HIST_INFO_WORKGROUP
0 rows exported
. . exporting table
CDM_INCIDENT2SERVICES
1040 rows exported
. . exporting table
CDM_INCIDENTS </code>
EXP-00002: error in writing to export file
EXP-00002: error in writing to export fileerror closing export file /archive/weeklybkp/export/loc2/sd-04-Sep-08-55.dmp
EXP-00000: Export terminated unsuccessfully
I got the above error.It only backup 2Gb after that the above error came.Please help me.
Regards,
DB.

following link can help you out.
http://arjudba.blogspot.in/2009/12/export-fails-with-exp-00002-error-in.html
Check the solution section.

Exporting ISSUES! Help

I am a relatively new user to lightroom. I haven't had any exporting issues until today. I am attempting to export a photo/photos to a specific folder with a custom name. When I do this it exports the WHOLE library and NOT the edited photo. What am I doing wrong??

Lightroom usually exports all images that are highlighted. If you only want to export one image then make sure it is the only image that is highlighted.

Exporting issues after 4.2 upgrade

Has anyone else experienced exporting issues after installing the 4.2 upgrade? It used to be a breeze but now I keep getting the message that a destination folder has not been specified even though I've done that. Any feedback would be greatly appreciated! Thank you.

Are you using an Export preset, or setting the Export up manually each time?

Reporting Export Issue from Taleo

Can anyone help? We have a work around for the Exporting Issues into Excel 2010 regarding figures and dates only reading as text, however, a new issue has arisen. In one field we have Aggregated Agencies assigned to any particular Job Code. In the legacy reports, every agency name exported into one cell in Excel, now they export into individual rows, this causes a report to be too long and there is no way to amalgamate them into one cell. Has anyone found a workaround for this?

is there someway that it was reformatted by the Iomega drive being daisy chained to it?
No. That is not possible -anyway, reformatting erases everything on a drive.
You would have noticed that first.
You can download the [NTFS-3G driver|http://macntfs-3g.blogspot.com> which will let you read, write and even reformat the clients drive as NTFS on the Mac. All reasonably modern Windows PCs work with this disc format and you won't run into the file size limitations associated with FAT formatted drives.

Using 128bit key Blowfish and any export issues

Hi,
I want to use blowfish (symmetric key algorithm) in my product and which will be shipped outside US. Reading Sun's documentation I am bit confused and I am not sure if the jce package is going to be available outside the US.
Has anyone used the default available symmetric key algorithms in the JCE package (javax.crypto.*) and faced any export control issues ?
Please let me know.
Thanks
RT
Here is a sample code
String ks = "123456789123456";
kb = ks.getBytes();
SecretKeySpec key = new SecretKeySpec(kb,"blowfish");
Cipher cipher = Cipher.getInstance("blowfish");
// Initialisation of cipher object for Encryption.
cipher.init(Cipher.ENCRYPT_MODE, key);

1. the issue is rather an import issue for some countries, than an export issue for US as far as you use jre>=1.4 .
you can read the
'Downloading the "Unlimited Strength" Jurisdiction Policy Files'
section of
http://java.sun.com/products/jce/javase.html
2. The restricted (defualt) shipped version already covers Blowfish if you mind that.
3. I use Blowfish with restricted (default) version of JCE in applications deployed in europe and have not heard of customer complaining sofar: they are supposed to use webstart or jre1.5.

Read the .dmp file exported using exp

Hi,
Could anyone tell me what option in imp i can use to just read or check whether schema that i am expecting exists in the .dmp file (exported using exp) or not before importing into the database. Also is there any option in the imp to search for the table in the entire dump file? Please let me know.
Thanks,
Nagarjun.

Hi,
In the import command, You can give Show=y and log file option. Show =y will run the import command but will not import anything and will create a log file that will contain all the statements in the sequence which will be executed when import is done. In that import file you can look for tables and schema what ever you want.
Regards

Summary: Problem with export (maybe...terminated sucEE to XE issues exp/imp

Summary: Problem with export (maybe...terminated successfully with warnings) and import (IMP-00022: failed to process parameters)
I used PL/SQL developer to make a parameter file (initially I used it to export, then I just stole the file to try again). It contains 100 tables from a single schema.
Export from prod DB using exp parfile=test.par: Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
server uses ZHS16GBK character set (possible charset conversion)
About to export specified tables via Conventional Path ...
. . exporting table CONTRACT_INFO 12 rows exported
EXP-00091: Exporting questionable statistics.
'Export terminated successfully with warnings.' !!!I want to import into the cs2_user schema (same privileges as on the production DB) trying:impdp 'sys as sysdba'@danieldb schemas=cs2_user dumpfile=test01tables3.dmpThat gets the error: UDI-00014: invalid value for parameter, 'attach'
I then thought maybe you have to use imp/exp or impdp/expdp instead of a combination (exp + impdp) so I tried: imp 'sys/admin as sysdba'@danieldb touser=cs2_party_owner file=test01tables4.dmpbut then I just get: IMP-00022: failed to process parameters
Anyone see why its all failing? :s
Mike

you must input SID name into single-quotes like:
C:\Tools\Oracle\product\10.2.0\db\NETWORK\ADMIN>expdp 'sys/manager@stb as sysdba'
Export: Release 11.2.0.1.0 - Production on Thu Feb 9 13:46:16 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
UDE-06550: operation generated ORACLE error 6550
ORA-06550: line 1, column 11:
PLS-00201: identifier 'SYS.DBMS_UTILITY' must be declared
ORA-06550: line 1, column 11:
PL/SQL: Statement ignored

Oracle 11g Export issue

I have Oracle 11g (11.1.0.6) in one server, and I have 10g (10.2.0.3) database in all other server. I am trying to do EXP (normal export not expdp) of my 10g database using the 11g client. I am getting the following error.
Export: Release 11.1.0.6.0 - Production on Wed Jul 22 15:17:03 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8MSWIN1252 character set (possible charset conversion)
EXP-00008: ORACLE error 1003 encountered
ORA-01003: no statement parsed
. . exporting table SNP_DT
EXP-00008: ORACLE error 904 encountered
ORA-00904: "MAXSIZE": invalid identifier
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
Is there any way way to solve this. Could some one please help me.
Thanks
Mano
Edited by: Mano Rangasamy on Jul 22, 2009 3:24 PM
Edited by: Mano Rangasamy on Jul 22, 2009 3:26 PM

I have the same issue, but my client (export) is 11.1.0.7.0 and my database is 11.1.0.6.0. I beleaved that the same versions (11) have to work toghether. But they do not.
Does it mean that I have to reinstall my client to have en export that works?

Export issue --EXP-00028

Similar Messages

Maybe you are looking for