Export Layers as Files - Please Help on Error Message

Hi, Not sure if I'm doing the right thing anyway, but I'm trying to export all the layers in one file as separate JPGs. Each layer has its own name and ideally, i would like to save each layer as its layer name.
When I choose the script 'export layers to files' it flashes on each layer and then eventually comes back with the error 'Specified value greater than maximum allowed value'.
Does anyone have any idea of what this means? I have no real knowledge of scripting, it was just that this option sounded like it would do exactly what I needed!
Thanks in advance,
Gill

Hi and Welcome to the Community!
With only that limited information (e.g., no organizer app nor version, no version of the Desktop Software, etc.), all I can think to do is provide this:
KB12268 Synchronization support for BlackBerry Desktop Software for Windows
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

PLEASE HELP! Error Message When Trying to Publish Site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP!!@

Business Catalyst does not support special characters in file names (i.e. "&"). Through normal paths of placing or importing files, Muse will automatically alter the file names during publish to remove the special characters. The one exception path I'm aware of is an .oam file from Edge, where Muse doesn't have enough knowledge of what all is within the .oam package to safely alter the file names.
When the error occurs, is it always for a file that contains a special character in the file name?
How many files are being uploaded?
If you click "Resume" does the Publish process:
A) Proceeds and completes
B) Puts up the same dialog for the same file
C) Puts up a similar dialog, but for a different file
D) Other?
Thanks.

Please Help! Error message: Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number.???

My old PC crashed and died, and I am unable to deactivate the licence of Photoshop Elements 7.
I re-installed Photoshop Elements 7 via a trial download from Adobe website onto my new PC, Windows 8.1 single language.
My serial number is not accepted.
Error message: 'Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number'.
Customer help care is not helpful and keep ending my chat before I get a solution.
Can someone please help me and let me know how I can rectify this problem!!!

Thank you Benjamin MItchley. I reviewed the chat log and I can confirm that they are correct we do not provide installation support for Photoshop Elements 7 due to the age of the software title. Photoshop Elements 7 also does not support activation so there is no risk that you were unable to deactivate the software on your previous computer.
I am showing the serial number under your account was provided from an equipment manufacturer. It is possible there may have been a customized installer for that version. Have you contacted the computer manufacturer to obtain the installation files for the copy of Photoshop Elements 7 included with your computer?
Since you did not migrate/transfer over any files it is unlikely there is a software issue preventing the installation. You can try running the CC Cleaner Tool to ensure that no corrupt licensing files may be preventing the installation process. You can find details of the use of the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

Please help with error message invoking external service from BPEL

Yes, I'm new to Oracle SOA Suite and BPEL Process manager. I've searched the forums, OTN, and Google and have not found any description of this error message:
"oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: <operation-name>"
Using JDeveloper 11.1.1.2.0 and WebLogic/SOA 10.3.2.0.
The BPEL process was built completely using JDeveloper's graphical tools... I haven't done any raw editing of the BPEL files yet. What types of things might I possibly be doing wrong that would cause this error to occur? Any idea what two things the server is comparing and deciding that there's a mismatch? It doesn't look like it is even attempting to invoke the external service, but bailing out before that, thinking that it's going to send bad data. Below is a bit more detail.
Also, I loaded up the WSDL (same one that I gave to JDeveloper) into SOAPUI. Then I took the payload that SOA was about to send (see below) and pasted it into SOAPUI. SOAPUI didn't complain and the target web service accepted the message and produced a "success" response. It looks like the payload is correct, so I don't know why SOA is complaining.
Thanks for any help you can offer.
=====================================================
Faulted while invoking operation "UpsertEmp" on provider "SiebelUSEmployeeIntegration".
<messages>
<input>
<UpsertEmpInput>
<part name="SiebelMessage">
<SiebelMessage>
<ns1:USEmployment>
<ns1:globalId>123456abcdef</ns1:globalId>
<ns1:employeeId>000123456</ns1:employeeId>
<ns1:effDt>1/1/2009</ns1:effDt>
<ns1:emplStatus>A</ns1:emplStatus>
<ns1:supported>N</ns1:supported>
<ns1:employed>Y</ns1:employed>
<ns1:activeStatus>Y</ns1:activeStatus>
<ns1:hrEditOnly>Y</ns1:hrEditOnly>
<ns1:paygroup/>
<ns1:statusCode/>
<ns1:origHireDate/>
<ns1:termDate/>
<ns1:latestHireDate/>
<ns1:locationCode/>
<ns1:locationDescr>Somewhere</ns1:locationDescr>
<ns1:positionCode/>
<ns1:jobCode/>
<ns1:jobDescr/>
<ns1:supervisorEmplid>000654321</ns1:supervisorEmplid>
<ns1:deptCode>ITG</ns1:deptCode>
<ns1:deptDescr>Information Technology Group</ns1:deptDescr>
<ns1:ministryCode/>
<ns1:ministryDescr>Core Services</ns1:ministryDescr>
<ns1:subministryCode/>
<ns1:subministryDescr>Information Technology Group</ns1:subministryDescr>
<ns1:wwcFreeSubFlag>N</ns1:wwcFreeSubFlag>
<ns1:lakeHartMC>1234</ns1:lakeHartMC>
<ns1:testFlag>Y</ns1:testFlag>
</ns1:USEmployment>
</SiebelMessage>
</part>
</UpsertEmpInput>
</input>
<fault>
<bpelFault>
<faultType>
<message>0</message>
</faultType>
<remoteFault>
<part name="summary">
<summary>oracle.fabric.common.FabricException: Number of SOAP body elements and parts do not match in operation: UpsertEmp</summary>
</part>
<part name="detail">
<detail>Number of SOAP body elements and parts do not match in operation: UpsertEmp</detail>
</part>
</remoteFault>
</bpelFault>
</fault>
<faultType>
<message>0</message>
</faultType>
</messages>

Welcome to BPEL. Take a moment, and write "it's a namespace issue" on a sheet of paper. Post it near your monitor. It won't always be a namespace issue, but it's usually a good thing to suspect first! Is the namespace prefix ns1: defined somewhere? Does your XML that is being sent really match what the WSDL has for input to the UpsertEmp operation? The namespaces for each element level in the XML need to match, not just the lowest level.
When problems like this get really sticky, you can use TCP tunneling (obtunnel shell?) to capture what is really being sent to the server, and compare that to what is sent from SOAPUI. That's more useful if it's a subtle header problem, but you may get better error messages if you catch the BPEL message and send it using SOAPUI.
Good Luck, Andy

Please help. Error message on desktop iMac reads: "Unable to update Firefox. Please see your administrator."

Hi. My last update was March 27, 2015. Just last month. I keep getting error messages that say Firefox cannot update. I've read this makes it a security issue if it won't allow Firefox to update. Please assist. Thanks.

If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 37.0.2: https://www.mozilla.org/en-US/firefox/all/
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install or update Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Please Help Me(Error Message)

When I click on Itunes is Giving me an Error Message Saying
(Please make sure that Quicktime is Properlly Installed)
This is the first time That Ihave gotten this Message if any body can help please let me know

Did you verify that Quicktime is installed? iTunes will not work without Quicktime. Post back and let me know.
Rachyl

Please help! Error messages -3, -1603, Internal error 2318 during download

Hello! I have been having trouble with itunes for quite some time now. When I download the itunes/QT package, the download stops near the end and gives me the 'Error Code: -3 QuickTime failed to install' message. I have uninstalled an reinstalled countless times and I'm going crazy! I have already tried:
- downloading the standalone Quicktime
- Disabling my security/firewall/virus protection
- Deleting Windows Update KB908531
- Using the windows install cleanup
- Clearing my Temp files
I have looked through the forum and I have not seen any threads by someone with the same problem. I'm NOT getting error 1402. Any suggestions??
Thank you in advance for your help.
Dell Dimension 4700 Windows XP

This error message shouldn't appear while downloading iTunes/QT. Have you chosen to directly execute the downloaded file?
I don't know if it might help, but you could try to first save the package to disk and then running the installer, i.e. after the download has completed.
Are you using a 32bit or a 64bit version of Win XP? The issue often discussed here (the conflict with the Windows Security Update you removed) only occured with 64Bit windows, afaik.
I'm afraid I don't remember the errorcode I used to get when the QT installation failed.

Please help: strange error message when trying to burn cds

I have been trying to burn an itunes playlist onto cds and I have never had trouble doing this before, but just this afternoon I have started getting an error message and the disc will automatically eject itself immediately following the initializing stage.
The error message I receive is this: "The attempt to burn a disc failed. The device failed to calibrate the laser power for this media."
What does this mean? What can I do to fix the problem? Thank you in advance!!
(Additional information in case this is helpful: The discs are Maxwell CD-R audio cds with 700mb/80min capacity, and my itunes is version 7.3.1. The playlist is long -- spanning multiple cd lengths -- but I have never encountered a problem with that before, so I don't think that is causing the error.)

Same here.Although i've had this problem since febuary of this year.
Just upgraded to 7.4 and it still does'nt work.Its not an uncommon problem,there has been hundreds of threads about this and thousands of users with the same problem,apple don't seem to want to recognise or solve the problem.Disgraceful behaviour on their part.
I've simply had enough now so i've contacted these...
http://www.bbc.co.uk/consumer/tvand_radio/watchdog/contactindex.shtml
...people.Hopefully they can make apple sit up and take notice of this problem,although i have my doubts.I suggest you do the same if you to have had enough of apple's simply dreadful customer service and faulty software.
Sorry i could'nt be of any help to you but i can assure you that are not alone in this.

Please help - strange error message when trying to download i tunes

Hi
When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar. I have tried all thr suggestion on the web, deleted i tunes and quicktime, deleted temp folders and even changed the settings in myconfig, but what ever i do i still get the same message!
HELP PLEASE

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Please help! error message when trying to download pictures from iphone5 to macbook pro

Hello everyone,
lately I have been having some issues when trying to download pictures from my iphone to my iphoto library. Whenever I try to do so this message pops up "The following file could not be imported. The file is in an unrecognized format." Would anyone happen to know why this is happening? I was always able to transfer my pictures from my phone to my laptop before, so I don't know why this is happening now.
Thank you very much to whomever might be able to solve this problem for me!!

"The following file could not be imported. The file is in an unrecognized format."
if you look at the error message - is the filename mentioned? What kind of file is it? A JPEG? A video?
Can you import the files from your iPhone with Image Capture?

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Please Help! Error Message, Can't Uninstall or Open

I have itunes on a newer computer. It recently stopped opening and I get "This action is only valid for products that are currently installed." I get this SAME message when trying to uninstall itunes. I try and install a new version over it, same message. PLEASE HELP. I don't want to have to reformat my computer, but I'm feeling almost like it is the only way to do it.

Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install.

Please help. Error message "Document is licensed for a different user account"

I purchased a ebook on B and N and saved to my PC. I added this ebook to the library in Adobe Digital Editions and it is displayes. Whena I click on it to open I receive the error message"Document is licensed for a different user account". Please let me know what to do?
Thank you.

Hi,
In order to fix this you need to contact B&N support and ask them to reset download link of the books and then download same book once again.
Regards
Rizwan.

Please Help with Error Message

I receive this message while playing at yahoo poker. java.lang.OutofmemoryError:java heap space
Can someone help resolve this problem?
Thanks
Chad

The Yahoo program is demanding more memory from Java than it has available. There is a setting that you can enter in the Java Control Panel that increases the maximum amount of memory that Java can use, if needed. By increasing this limit to a large enough value, this error can be eliminated. The default memory size is 64 megabytes.
These instructions are for Java version 1.4.x, but earlier version are similar. If you can't find the entry area, check other tabs.
Open the Windows Control Panel > Java Control Panel (it may be labeled Java Plug-in) > Advanced tab
There's an entry area titled "Java Runtime Parameters" at the bottom. Enter this option in it:
-Xmx96m
This allows Java to use 96 megabytes of memory. To allow it to use 128 mb, the entry would be -Xmx128m
Use the smallest even number that will allow the program to run. After changing this value you must close all browser windows.

Export layers to file script error in Photoshop CC

I need help with an issue. I also asked this in the general forum but was refered here to ask all of you amazingly talented scripting geniuses.
My issue is with the Export Layers script that comes installed with Photoshop. I am running Windows 7 64bit - using photoshop version: creative cloud 64bit.
When i try to run File>Scripts> Export Layers to files I get this error
Error 22: Windows does not have a constructor. Line: 239 -> dlgMain = new Window ("dialog", strTitle);
When i load Photoshop Creative Cloud 32 bit i get a different error message when trying to run the script.
Error - 33: Internal error . line:395 -> dligMain.pnlFileType.pnlOptions.grpJPGOptions = ...
I can't run the image processor script I also get an error with that.
This is an issue for me as i use this script on a daily basis. It worked in PSCS6
I upgraded, i dont' want to have to load an older version of photoshop to do this task
Thanks
Carrie

I'm afraid no ideas...
These kind of errors appeared to me too (Mac, CS5/CS6). If memory doesn't fail me - and there were tricks to be applied in your own scripts to workaround the problem - the issue was due to a stack of commands involving Document change (say: switch from document A to document B and then activate the layer X): what happened was that the script's call "activate the layer X" was too quick - i.e. it happened before Photoshop could actually perform the switch. As a result the "activate the Layer X" was executed on the A document instead of the B document and the whole thing broke.
Mind you, it's just an example I've made up.
Tab view for some reason worked as expected.
I would suggest to try with no other documents open, resetting the preferences (launch PS pressing CRTL+ALT+SHIFT) - but this is quite generic, as a recommendation.
Davide

Export Layers as Files - Please Help on Error Message

Similar Messages

Maybe you are looking for