Export log format / language

Greetings,
I am referring to the export log of 9i and 10g.
Can the log be in a different language, other than English? and if so, how to set it to be in that other language?
Also, is there some document specifying the log's format? Where can it be found?
Thanks for your help,
Ohad

Hi Ingvild,
> EPA is not a normal zip'ed simialr file is it?
It's not "zip'ed similar", it is a ZIP. Just with another postfix than "ZIP".
> Atleast WinRar does not support the fil format.
It does. Rename ".EPA" to ".ZIP", and WinRAR will be lucky to help you (just tested it again, to be sure).
The same holds for the .ept files within the .epa file.
> now way to export all the names in english in a lits,
> xml, exel or somthing so that a translater can
> translate it? and then imort it again.
For sure in theory you can take the EPA and change it manually, but you have to understand the EPA structure and the logic inside. And that's something which isn't trivial at all. In addition, if you'll have a look at the i18n'ed files, you'll see that the property names are all but clear text.
> To use the translation worklist which I have created
> the translater have to do the translation within the
> portal?
Yes.
> And if that is the only way is there any otherway to
> export in a list, xml, excel file including alle the
> portal object names?
At least I don't know any. And you won't find any if searching for "translation" on help.sap.com. Both facts together mean that it will be somewhat unlikely that there is a third way...
Hope it helps nevertheless
Detlev

Similar Messages

  • Log in language would be english or german and output format would be in ge

    Hi,
            There is requirement in my script that log in language would be english or german and output format would be in german language.How could I do this. Please guide me.
    Regards,
    Ranu

    Hello Ranu,
    How do you call the script ?
    If you are calling using a z* program, then you can set the language aalso with the OPEN_FORM (LANGUAGE) function module. Always pass this as 'DE'. By default, it will take the log-on language.
    If it is standard program and you are assigning the form using some customization, then you may have some option to assign the language aslo.
    Regards,
    Selva K

  • Message required in Log in Language

    Hi,
    SRM 4.0 , Classic Scenario.
    While creating a SC , I am getting an Error message which is in Dutch Language , which I want in English Language.
    Actually this message is for Cost Centre which is called from B.E. system KI-235 & in SRM , message called is BBP_PD - 047 which is maintained as &1&2&3&4.
    In BE system, this message KI - 235 is maintained in Multiple languages i.e. in English , Dutch , Chinese etc. & in SRM, 047 is also maintained for Log on Language, but still the error message is pop up in Dutch only even through I log on in SRM in English only.
    What I need to do to get this error message in Lon On language in SRM?
    BR
    Don't worry about points....

    Hi,
    Please remove the language in the RFC user (SU01)
    Kind regards,
    Yann

  • Fail to toggle between Chinese & English as per logged in language in WAD

    Hi WAD Gurus,
    WAD does not allow us to modify descriptions accordingly to the logged
    in 'language'.
    Login in EN.
    Create & Save WAD template.
    Log in ZH (simplified Chinese)
    Modify descriptions to Chinese.
    Problem #1 When template is executed in EN - The output descriptions
    replaced the English text- it becomes the garbled characters, which is
    not what we expect.
    We expected to see English descriptions when user logged in EN. And we
    expect to see Chinese descriptions when user is logged in ZH.
    Problem #2 We tried a work around, where we put <English text desc -
    chinese description> .
    To do this, we had to be logged in ZH. However, after saving the
    template, we could not modify the template again when logged in as EN,
    it gives us the error (screenprint) and then it will not save giving a
    run-time error ‘5’
    Please suggest solutions for the problems above.
    SAPGUI 640 FEP 25
    BW350 FEP 12.343
    Regards
    Mahendra

    Any suggestion

  • C# winform + crystalreportviewer to export HTML format  ?

    Hi,guys.
      I create a winform app with a crystalreportViewer[cr dev for vs 2012], and i found CR can export many formats,like pdf,word,excel.
      But I can't find "HTML" format. Although I know we can export HTML in the editor environment's preview mode, but my winform app can't export.
      What should I do?Many thanks!
    Message was edited by: Ludek Uher

    What you want to do is load a strongly typed report. This method of loading a report uses the ReportDocument component from the Components tab of the ToolBox.  When this component is added to the form, a dialogue box appears and prompts the Developer as to which type of Component to add to the form -> Crystal Report.
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
            crReportDocument = New test
            CrystalReportViewer1.ReportSource = crReportDocument
        End Sub
    Remeber that a strongly typed report is compiled into the app exe. E.g.; use with care as the exe size will grow by leaps and bounds...
    - Ludek  
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Location of DB Export log in a Linux System

    Hi All,
          I would like to know where is the DB Export log file located in a Linux system.
    Thank you,
    Anil P M

    Hi Anil,
    In that case look for Check for sap*.logs in in the directory sapinst_instdir.
    I guess you are planning to do hetrogeneous system copy. Check the standard guides as well. The tell you what files will be saved where.
    Regards.
    Ruchit.
    Message was edited by:
            Ruchit Khushu

  • Illustrator CS3 Import and Export File Format list?

    Hello,
    Has anyone typed up an updated supported import and export file format list for CS3? I used to reference a support knowledgebase document, 1001741, (no longer on Adobe's site) that showed the majority of file formats and versions that Illustrator was able to import. I searched all over and couldn't find one, then called support and they confirmed they no longer had a list like that available--they had split the import options into separate lists--like what versions of Photoshop files, what versions of .eps files, .tiff files etc. Illustrator CS3 could open.
    The reason I was looking because I wanted to see what version Corel file CS3 could open after I was not able to open a customer's v.12 .cdr file.
    Thanks,
    Rick H.

    I am pretty sure that the last supported version of Corel that AI can open is version 10.
    :) Mordy

  • Archive Log Format Issues

    Hi DBAs,
    I have 2 Archive destination. My archive log format is ARC%S_%R.%T
    But In my 1 location E:\app\Administrator\product\11.1.0\db_1\RDBMS format shows ARC00025_0769191639.001
    2 location shows E:\app\Administrator\flash_recovery_area\BASKAR\ARCHIVELOG\2011_12_08\O1_MF_1_25_7G15PVYX_.ARC
    SQL> select destination from v$archive_dest;
    DESTINATION
    E:\app\Administrator\product\11.1.0\db_1\RDBMS
    USE_DB_RECOVERY_FILE_DEST
    My Question is that, I am using this format only ARC%S_%R.%T
    but it shows different format in each location. May i know what 's the reason behind this?
    Thanks in Advance

    If you are using other archive destination other than FRA it will creates as per LOG_ARCHIVE_FORMAT,
    and the FRA configured then the archive format for FRA is O1_MF_1_25_7G15PVYX_.ARC
    from your query it is clear that there are two destinations are configured, So if you dont want *.ARC* files, you have to disable FRA.
    But recommended to use FRA easy to manage.

  • Clarification on log format

    Hi all
    I have a confusion regarding the log format of cisco ASA.
    The format of log that I have is
    6|Mar 15 2013 12:01:25|109025: Authorization denied (acl=xxx) for user 'xxxx' from xxx.xx.xx6.53/137 to xxx.xx.xxx.255/137 on interface Outside using UDP
    but according to cisco reference the format should be
    May  2 23:07:23 10.160.205.10 %ASA-6-302015: Authorization denied (acl=xxx) for user 'xxxx' from xxx.xx.xx6.53/137 to xxx.xx.xxx.255/137 on interface Outside using UDP
    I just want to know why my log for mat differs from cisco specification.
    Can anybody please help me??
    thanks
    Bijay

    hi,
    U will find the Char format <BD> in char fomats along with Barcode format.
    if u don't find them there then reimport the script from client 000 and see.
    You can the find that in the Character formats radio button and there itself you can see the barcode option.
    reward if helpful
    regards,
    sravanthi

  • How to set access.log format to "combined"

    Hello,
    I'm trying to get AWStats working on Solaris and have that working fine, but to get more information, I need to set the log format to "combined".
    Question is: is there a way to modify what is output in the access.log?

    SHOULD I RECOMPILE and specify the access method?
    Should i change line 1131 in db4.cpp to DBTYPE type = DB_QUEUE; ???

  • Apache Log Format Question

    Hi,
    I need to set my Apache logs to combined for AWStats to work. In 10.6 server admin there seems to be no place to change the log format. Can any one tell me how I do this? I have multiple sites hosted so will I need to do it for each site?
    Thanks
    Paul

    You'll need to change it directly in the config file for each site. They're in /etc/apache2/sites, with names starting with a site ID number and ending in .conf. You need to change the CustomLog directive to something like
    CustomLog "/var/apache2/access_log" combined
    ...and then restart Apache ("sudo apachectl graceful" will do the trick).

  • Export file format

    Hi All,
    I want to export data in column format using calculation script. Currently Account, Period and scenario is dense and others are sparse in my essbase database. I am exporting data for actual scenario, multiple accounts and level zero periods. In the export file essbase automatically setting level zero period (Week 1 to week 53) in column header and other 2 dimension in row. I want to change the export file format using calculation. I want scenario to be column header and other all dimension to be in row. Is there any way I can specify the export file format. I used all the export setting but nothing is working.
    Your response will be appreciated.
    Thanks,

    If scenario is dense and you are using the DATAEXPORT calc command try
    SET DATAEXPORTOPTIONS {DATAEXPORTCOLHEADER Scenario;};
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Change log-in language to default language (English)?

    My log-in language is Korean but my default language is English. The log-in language used to be English but it suddenly changed back to Korean? Is there a way to change my log-in language to my default language? I tried re-installing Mavericks and even changing the language using the terminal method but it didn't do anything.

    Hi,
    Finally I got it!
    In order to have the job log in English, you have to modify also the locale language of Data Services using the SAP Data Services Locale Selector tool.

  • Export window format changed, don't know why

    You know aperture is a love/hate relationship. What do I love? I became an advanced user fast, it's intuitive, but the bugs are just maddening and apple has never responded even once to my countless bug and crash reports. Apple has strayed so far from computing as it's central focus... the impression I get is they just don't care about my bug problems or if I stay an apple customer after owning that little baby Duo laptop, PowerPC, ibook and now MacBook Pro. I think that's sad. Just keep pushing the phones and ipods- Steve, and don't worry about me. I'll eventually just go away. That said, the format of the export window changed to first line: export preset, 2nd line: Subfolder Format, 3rd: "Grayed out" customer subfolder name, 4th: Name Format, 5th: Custom Name, 6th: File Name Example. To my knowledge, this new export window format changed without any action on my part. I don't like it because I can no longer just export it to the desk top without it being automatically put in a folder. The old export window format just had an option for tiff, jpg, psd and a name to type in and where it was heading. How do you get back this old export window format? This is baffling like the disappearing library in the trial version every time you shut down and restarted.

    Addressing your final remarks, I don’t see any problem. First: have your current Preset -> Image Export set to what you want in terms of JPEG or PSD etc. Second select the image(s) you want to Export. Select something like File -> Export -> Versions (or whatever you want). The Export panel defaults to the Desktop, and the images will be placed there - no folder is required.
    Maybe I’ve missed your point, but I don’t see any problem.

  • Export table format SQL loader using spool

    Hi
    In enviroment I only access for to do SELECT , then I want to export some tables using SELECT using spool of data
    But I wanted export in format Sql Loader for to import other environment
    Is possible to do It ?

    Depends where the NULL is.
    SQL> SELECT * FROM t ORDER BY 1;
            ID DESCR      DT
             1 One
             2            30-MAY-2007
             4 Four       30-MAY-2007
               Three      30-MAY-2007
    SQL> SELECT id||',"'||descr||'",'||TO_CHAR(dt,'dd-mon-yyyy') output
      2  FROM t
      3  ORDER BY 1;
    OUTPUT
    ,"Three",30-may-2007
    1,"One",
    2,"",30-may-2007
    4,"Four",30-may-2007John

Maybe you are looking for